Power for the electronic digital multimeter is normally  supplied by what internal power source?

1 Answer

Answer :

Rechargeable batteries.

Related questions

Description : How is an overload condition indicated by the electronic digital multimeter?

Last Answer : Simultaneous flashing of display readouts

Description : In applications where electronic waveforms are displayed on a CRT screen, the input signal is normally applied to what CRT element?

Last Answer : The vertical-deflection plate.

Description : Solder used in electronic repair is normally an alloy of what two elements?

Last Answer : Tin and lead.

Description : Before using an all-purpose electric measuring instrument (multimeter) utilizing internal batteries to supply power for resistance measurements, you should FIRST ____________. A. remove one of the ... batteries C. calibrate using a known external resistance D. select the proper resistance range

Last Answer : Answer: D

Description : You are calibrating a multimeter using internal batteries to supply power for resistance measurements. However, you are unable to adjust the pointer to 'zero' using the adjustment knob. Therefore, you should ... change scales to the R X 100 scale and adjust using the 'zero ohms' adjusting knob

Last Answer : Answer: A

Description : What type of circuit breaker is used on a multimeter?

Last Answer : A push button or push-pull circuit breaker (small size, low power).

Description : What meter reading is shown on each multimeter in each part of figure 1-50?

Last Answer : (A) 410 mA dc; (B) 3.9 mA ac; (C) -22 V dc; (D) 600 V ac; (E) 1.4 V ac; (F) 1.9 kohms

Description : Why would you use a hook-on voltmeter instead of a multimeter?

Last Answer : To measure current safely and easily (with no need to disconnect the wiring of the circuit).

Description : How is the mirror on a multimeter used?

Last Answer : Make sure no image of the pointer is visible in the mirror when reading the meter.

Description : What is the reason for having a mirror on the scale of a multimeter?

Last Answer : To stop parallax error

Description : Why is the dc scale on a multimeter different than the ac scale?

Last Answer : The meter movement reacts to average ac voltage and current and the effective value is desired.

Description : How is a multimeter changed from a voltage measuring device to a resistance measuring device?

Last Answer : By changing the position of the function switch

Description : Why is a multimeter preferred over separate meters?

Last Answer : It is much more convenient to have one meter with several functions than several meters each with a single function.

Description : What is a multimeter?

Last Answer : . A single measuring device capable of performing the functions of a dc voltmeter and ammeter, an ac voltmeter and ammeter, and an ohmmeter

Description : Before servicing the device indicated as 'A' in panels #1 and #3 of the illustration, the device labeled 'CT' must __________. EL-0003 A. have the disconnected leads taped to prevent ... D. have one lead grounded to discharge static electricity for the prevention of damage to electronic components

Last Answer : Answer: C

Description : When troubleshooting electronic equipment, you should use a high impedance multimeter ________________. A. to prevent excess current flow through the meter that would damage it B. for AC measurements only ... being tested D. so as not to load down the circuit and obtain erroneous voltage readings

Last Answer : Answer: D

Description : Electronic equipment used to measure standing wave ration. A. Reflectometer B. Wavemeter C. Altimeter D. Multimeter

Last Answer : A. Reflectometer

Description : What format of digital tape recording is normally used to record instrumentation or telemetry data?

Last Answer : Serial digital magnetic tape recording.

Description : What format of digital tape recording is normally used to store computer data?

Last Answer : Parallel digital magnetic tape recording.

Description : A device which can be used to check the calibration of a circuit breaker is a _________________. A. 500 volt megohmmeter B. portable low voltage high current testing unit C. standard digital multimeter D. clamp-on voltmeter

Last Answer : Answer: B

Description : Digital version of an AVO meter is known as a) Digital Ohmmeter b) Multimeter c) Digital Multimeter d) None of these

Last Answer : c) Digital Multimeter

Description : List four applications of digital multimeter.

Last Answer : Applications : 1. It is used continuity test. 2. It is used to check diode 3. It is used to check transistor 4. It is used to measure voltage, current & resistance.

Description : Differentiate between analog and digital multimeter.

Last Answer : Analog multimeter Digital multimeter 1. Power supply is not required 1. Power supply is required 2. Less suffered from electric noise 2. Suffered from electric noise 3. It provides measurement ... 9. Bigger in size 9. Compact in size 10. Economical 10.Expensive

Description : Compare analog & digital multimeter.

Last Answer : Analog multi-meter DMM Power supply is not required  Power supply is required  Less suffered from electric noise  More suffered from electric Noise Less isolation problems. More ... visual indication Visual indication is not that much better. Less cost More cost

Description : what are the advantages of digital multimeter ?

Last Answer : Precise reading digital reading easy to use less losses due to no mechanical parts high efficiency small size compact can measure AC and DC voltage and current and resistance and can be use for continuity testing

Description : Digital Multimeter (DMM)

Last Answer : Digital Multimeter (DMM) Digital multimeter is the combination of Voltmeter (for measuring voltage) Ammeter (for measuring current) and Ohmmeter (for measuring resistance ... ;in the range of mega ohms.VISIT AT YOUTUBEBUY BOOKS AT EEE STORE

Description : What is the most common source of heat in electronic soldering?

Last Answer : Conductive-type soldering iron.

Description : If there is a reduction in the normally supplied frequency to a 120/240 volt, threephase AC current motor from 60 hertz to 55 hertz, the motor would _____________. A. run at a slower speed B. operate at a lower current C. overheat D. trip off the line

Last Answer : Answer: A

Description : Pick out the wrong statement. (A) Nitrogen is normally supplied in fertiliser either in Ammoniacal or the nitrate form, from which the soil takes it up in the form of ammonium ions ornitrate ... nitrate fertiliser is obtained as a by-product in an integrated steel plant having by-product coke ovens

Last Answer : (D) Ammonium nitrate fertiliser is obtained as a by-product in an integrated steel plant having by-product coke ovens

Description : The first electronic general purpose digital computer built by Eckert and Mauchly called ENIAC did not work on the stored program concept. How many numbers could it store in its internal memory? A) 100 B) 20 C) 40 D) 80

Last Answer : Answer : B

Description : The first electronic general purpose digital computer built by Mauchly and Eckert called ENIA did not work on the stored program principle. How many numbers could it store in its internal memory? a. 100 b. 20 c. 40 d. 80

Last Answer : 20

Description : The first electronic general purpose digital computer built by Motley and Accrete called ENIAC did not work on the stored program concept. How many number s could it store in its internal memory? a. 100 b. 20 c. 40 d. 80

Last Answer : b. 20

Description : The first electronic general purpose digital computer built by Mauchly and Eckert called ENIA did not work on the stored program principle. How many numbers could it store in its internal memory? a. 100 b. 20 c. 40 d. 80

Last Answer : b. 20

Description : The first electronic general purpose digital computer built by Motley and Accrete called ENIAC did not work on the stored program concept. How many number s could it store in its internal memory? a. 100 b. 20 c. 40 d. 80

Last Answer : b. 20

Description : What loop of a cooling system is often supplied by sea water?

Last Answer : The primary loop.

Description : What position data are supplied by 2D search radar?

Last Answer : Range and bearing.

Description : Power necessary to operate the horn relay shown in the illustration ____________. EL-0093 A. comes from each station's magneto B. is supplied from a 115 volt source C. is conducted through the relay's contacts D. also lights lamps 'R' and 'T'

Last Answer : Answer: A

Description : Power necessary to operate the horn shown in the illustration _____________. EL-0093 A. comes from each station's magneto B. is supplied from a 115 volt source C. is conducted through a relay coil D. also lights lamps 'R' and 'T'

Last Answer : Answer: B

Description : Indicate the false statement. Noise figure is defined as A. the ratio of the S/N power supplied at the input terminal of a receiver or amplifier to the S/N power supplied to the output or ... under test, both working at the same temperature over the same bandwidth and fed from the same source

Last Answer : C. an unwanted form of energy tending to interfere with the proper and easy reception and reproduction of wanted signals

Description : The synchronous speed of an 8 pole induction motor supplied power from a 50 Hz source will be ?

Last Answer : Ns         equals        f/pair pole 50/4      - 12.5

Description : What type of source is generally used in high-data-rate digital applications?

Last Answer : Laser diode.

Description : What type of source is typically used in low-data-rate digital applications?

Last Answer : LED.

Description : The evidence and proof that can be obtained from the electronic source is called the……. A)Digital Evidence B)Explainable evidence C)Either A or B D)Both A and B

Last Answer : A)Digital Evidence

Description : The evidence or proof that can be obtained from the electronic source is called the ……… a. Digital evidence b. Demonstrative evidence c. Explainable evidence d. Substantial evidence

Last Answer : a. Digital evidence

Description : The evidence and proof that can be obtained from the electronic source is called the……. A)Digital Evidence B)Explainable evidence C)Either A or B D)Both A and B

Last Answer : A)Digital Evidence

Description : Normally, how are high-power rf tubes tested?

Last Answer : In their circuit.

Description : The work done by a system is `8J`, when `40J` heat is supplied to it. Calculate the increases in internal energy of system.

Last Answer : The work done by a system is `8J`, when `40J` heat is supplied to it. Calculate the increases in internal energy of ... J B. 40 J C. 48 J D. `-32 J`

Description : The heat Q per unit mass per degree change in temperature that must be supplied or removed to change the temperature of a substance.  a. Specific Heat Capacity  b. Latent Heat  c. Heat of Transformation  d. Internal Heat

Last Answer : Specific Heat Capacity

Description : When the gas is heated at constant volume, the heat supplied increases the internal energy of the gas.  A.True  B.False

Last Answer : Answer: A

Description : For power measurements, what advantage does an electronic wattmeter have over an electrodynamic wattmeter?

Last Answer : Electronic wattmeters are capable of measuring high-fequency signals.