In applying Kirchhoff’s current law, what does the polarity of the current indicate?

In applying Kirchhoff’s current law, what does the polarity  of the current indicate?
by

1 Answer

Answer :

Whether the current is entering the junction (+) or leaving the  junction (-).
by

Related questions

When using Kirchhoff’s voltage law, how are voltage polarities assigned to the voltage drops across resistors? When using Kirchhoff’s voltage law, how are voltage polarities assigned to the voltage drops across resistors?

Description : When using Kirchhoff’s voltage law, how are voltage polarities assigned to the voltage drops across resistors?

Last Answer : The point at which current enters the resistor is assigned a negative polarity and the point at which current leaves the resistor is

Which of the procedures listed could result in damaging a transistor beyond repair? A. Applying incorrect polarity to the collector circuit. B. Applying excessive voltage to the input circuit. C. Careless soldering which would overheat the transistor. D. All of the above.

Description : Which of the procedures listed could result in damaging a transistor beyond repair? A. Applying incorrect polarity to the collector circuit. B. Applying excessive voltage to the input circuit. C. Careless soldering which would overheat the transistor. D. All of the above.

Last Answer : Answer: D

Kirchhoff's 2nd law deals with A. current in circuit B. voltage in circuit C. e.m.f in circuit D. both B and C

Description :  Kirchhoff's 2nd law deals with A. current in circuit B. voltage in circuit C. e.m.f in circuit D. both B and C

Last Answer : both B and C

What does Kirchhoff's current law states?

Description : What does Kirchhoff's current law states? 

Last Answer : Kirchhoff's current law states that " the algebraic sum of current entering and leaving a node is zero." (A node is a junction of two or more branches.)  

Kirchhoff's current law is applicable to 1. Closed loops in a circuit 2. Junction in a circuit 3. Magnetic circuits ...

Description : Kirchhoff's current law is applicable to 1. Closed loops in a circuit 2. Junction in a circuit 3. Magnetic circuits Which of the above is/are correct ?  (a) 1 only (b) 2 only (c) 3 only (d) 1, 2 and 3

Last Answer : Kirchhoff's current law is applicable to 1. Closed loops in a circuit 2. Junction in a circuit 3. Magnetic circuits Which of the above is/are correct ?  (a) 1 only (b) 2 only (c) 3 only (d) 1, 2 and 3

Kirchhoff's current law for parallel circuits states that the:

Last Answer : Kirchhoff's current law for parallel circuits states that the: sum of the total currents flowing out of a junction equals the sum of the total currents flowing into that junction.

Kirchhoff’s current law is valid for:

Last Answer : Kirchhoff’s current law is valid for: Both DC and AC circuits.

A negative damper with negative bias clamps the most positive extremity of the output wave shape to what polarity (positive or negative)?

Description : A negative damper with negative bias clamps the most positive extremity of the output wave shape to what polarity (positive or negative)?

Last Answer : Negative potential.

To which polarity does a positive damper with positive bins clamp the most negative extremity of the output waveform (positive or negative)?

Description : To which polarity does a positive damper with positive bins clamp the most negative extremity of the output waveform (positive or negative)?

Last Answer : Positive potential.

In the basic transistor amplifier discussed earlier, what is the relationship between the polarity of the input and output signals?

Description : In the basic transistor amplifier discussed earlier, what is the relationship between the polarity of the input and output signals?

Last Answer : The signals are opposite in polarity or 180 degrees out of phase with each other.

What is the relationship between the polarity of the voltage applied to the PNP transistor and that applied to the NPN transistor?

Description : What is the relationship between the polarity of the voltage applied to the PNP transistor and that applied to the NPN transistor?

Last Answer : The polarity of voltage applied to the PNP transistor is opposite of that applied to the NPN

To properly bias an NPN transistor, what polarity voltage is applied to the collector, and what is its relationship to the base voltage?

Description : To properly bias an NPN transistor, what polarity voltage is applied to the collector, and what is its relationship to the base voltage?

Last Answer : Positive, more positive.

What is the polarity of the first alternation of the tank circuit in an emitter-loaded npn pulsed oscillator?

Description : What is the polarity of the first alternation of the tank circuit in an emitter-loaded npn pulsed oscillator?

Last Answer : Negative

Using Weber’s molecular theory of magnetism, describe the polarity of the magnetic poles produced by stroking a magnetic material from right to left with the south pole of a magnet.

Description : Using Weber’s molecular theory of magnetism, describe the polarity of the magnetic poles produced by stroking a magnetic material from right to left with the south pole of a magnet.

Last Answer : South pole at the right, north pole at the left.

Before a diode will conduct, the cathode must be what polarity relative

Description : Before a diode will conduct, the cathode must be what polarity relative

Last Answer : Negative.

If logic 1 = -5 vdc and logic 0 = 0 vdc, what logic polarity is being used?

Description : If logic 1 = -5 vdc and logic 0 = 0 vdc, what logic polarity is being used?

Last Answer : Negative.

If logic 1 = +2 vdc and logic 0 = -2 vdc, what logic polarity is being used?

Description : If logic 1 = +2 vdc and logic 0 = -2 vdc, what logic polarity is being used?

Last Answer : Positive.

If logic 1 = -5 vdc and logic 0 = -10 vdc, what logic polarity is being used?

Description : If logic 1 = -5 vdc and logic 0 = -10 vdc, what logic polarity is being used?

Last Answer : Positive.

If logic 1 = -5 vdc and logic 0 = -10 vdc, what logic polarity is being used?

Description : If logic 1 = -5 vdc and logic 0 = -10 vdc, what logic polarity is being used?

Last Answer : Positive.

What is the polarity of the currents that feed the V antenna?

Description : What is the polarity of the currents that feed the V antenna?

Last Answer : Opposite.

Which law states, “The rate of loss of heat by a body is directly proportional to the difference in temperature between the body and the surroundings.” (1) Doppler’s Effect (2) Newton’s law of cooling (3) Kirchhoff’s Law (4) Stefan’s Law

Description : Which law states, “The rate of loss of heat by a body is directly proportional to the difference in temperature between the body and the surroundings.” (1) Doppler’s Effect (2) Newton’s law of cooling (3) Kirchhoff’s Law (4) Stefan’s Law

Last Answer : (2) Newton’s law of cooling Explanation: Kirchhoff’s Law – Kirchhoff’s Law signifies that good absorbers are good emitters. Stefan’s Law – The radiant energy emitted by a black body per unit area per unit time is directly proportional to the fourth power of its absolute temperature.

Which law states, "The rate of loss of heat by a body is directly proportional to the difference in temperature between the body and the surroundings." (1) Doppler's Effect (2) Newton's law of cooling (3) Kirchhoff's Law (4) Stefan's Law

Description : Which law states, "The rate of loss of heat by a body is directly proportional to the difference in temperature between the body and the surroundings." (1) Doppler's Effect (2) Newton's law of cooling (3) Kirchhoff's Law (4) Stefan's Law

Last Answer : (2) Newton's law of cooling Explanation: Kirchhoff's Law - Kirchhoff's Law signifies that good absorbers are good emitters. Stefan's Law - The radiant energy emitted by a black body per unit area per unit time is directly proportional to the fourth power of its absolute temperature.

Which law states, "The rate of loss of heat by a body is directly proportional to the difference in temperature between the body and the surroundings"? (1) Doppler's Effect (2) Newton's law of cooling (3) Kirchhoff's Law (4) Stefan's Law

Description : Which law states, "The rate of loss of heat by a body is directly proportional to the difference in temperature between the body and the surroundings"? (1) Doppler's Effect (2) Newton's law of cooling (3) Kirchhoff's Law (4) Stefan's Law

Last Answer : (2) Newton's law of cooling Explanation: Newton's Law of Cooling states that the rate of change of the temperature of an object is proportional to the difference between its own temperature and the ambient temperature.

Kirchhoff’s voltage law is based on the law of conservation of which thing?

Description : Kirchhoff’s voltage law is based on the law of conservation of which thing?

Last Answer : Energy

Kirchhoff's 2nd law is consequence of law of conservation of A. energy B. charge C. momentum D. power

Description : Kirchhoff's 2nd law is consequence of law of conservation of A. energy B. charge C. momentum D. power

Last Answer : energy

What does Kirchhoff's voltage law states?

Description : What does Kirchhoff's voltage law states?

Last Answer : Kirchhoff's voltage law states that " the algebraic sum of potential rises and drops around a closed loop is zero." Σ4V= 0 

Which one gives the monochromatic emissive power for black body radiation? (A) Planck's law (B) Kirchhoff’s law (C) Wien's law (D) Stefan-Boltzmann law

Description : Which one gives the monochromatic emissive power for black body radiation? (A) Planck's law (B) Kirchhoff’s law (C) Wien's law (D) Stefan-Boltzmann law

Last Answer : (A) Planck's law

What is sometimes known as the “Fourth-power law”?  A. Kirchhoff’s radiation law  B. Newton’s law of cooling  C. Stefan-Boltzmann law  D. Hess’s law

Description : What is sometimes known as the “Fourth-power law”?  A. Kirchhoff’s radiation law  B. Newton’s law of cooling  C. Stefan-Boltzmann law  D. Hess’s law

Last Answer : Stefan-Boltzmann law

If variable part of annual cost on account of interest and depreciation on the capital outlay is equal to the annual cost of electrical energy wasted in the conductors, the total annual cost will be minimum and the corresponding size of conductor will be most economical. This statement is known as (a) Kelvin's law (b) Ohm's law (c) Kirchhoffs law (d) Faraday's law (e) none of the above

Description : If variable part of annual cost on account of interest and depreciation on the capital outlay is equal to the annual cost of electrical energy wasted in the conductors, the total annual cost will be minimum and the ... (b) Ohm's law (c) Kirchhoffs law (d) Faraday's law (e) none of the above

Last Answer : (a) Kelvin's law

State Kirchhoff’s voltage law.

Description : State Kirchhoff’s voltage law. 

Last Answer : The algebraic sum of all the emf’s in a loop is equal to zero. 

Explain Kirchhoff’s Law with its mathematical expression in detail.

Description : Explain Kirchhoff’s Law with its mathematical expression in detail.

Last Answer : Kirchoff's law of radiation: Kirchoff's law: It states that at equilibrium temperature, the ratio of total emissive power of any body to absorptivity depends only upon the temperature of the body. ... respectively. At thermal equilibrium, absorption and emission rates are equal, thus,

Consider the following statements : 1. Network theorems are not derivable from Kirchhoff's law....

Description : Consider the following statements :  1. Network theorems are not derivable from Kirchhoff's law.  2. To get the . Norton current, one has to short the current source.  3. Thevenin's theorem is suitable for a circuit involving ... /are correct ?  (a) 1, 2 and 3 (b) 1 only (c) 2 only (d) 3 only

Last Answer : Consider the following statements :  1. Network theorems are not derivable from Kirchhoff's law.  2. To get the . Norton current, one has to short the current source.  3. Thevenin's theorem is suitable for a circuit ... /are correct ?  (a) 1, 2 and 3 (b) 1 only (c) 2 only (d) 3 only

Kirchhoff's second law is based on law of conservation of

Last Answer :  Kirchhoff's second law is based on law of conservation of energy.

What does the current rating of a fuse indicate?

Description : What does the current rating of a fuse indicate?

Last Answer : The amount of current the fuse will allow without opening.

If the total source voltage of the three-wire distribution system shown in the illustration is 240 volts, what is the voltage across load L5? [ NOTE: Kirchhoff's voltage and current laws apply ] EL-0075 A. 110.4 volts B. 112.2 volts C. 113.0 volts D. 114.8 volts

Description : If the total source voltage of the three-wire distribution system shown in the illustration is 240 volts, what is the voltage across load L5? [ NOTE: Kirchhoff's voltage and current laws apply ] EL-0075 A. 110.4 volts B. 112.2 volts C. 113.0 volts D. 114.8 volts

Last Answer : Answer: D

If the total source voltage of the three-wire distribution system shown in the illustration is 240 volts, what is the voltage across load L1? [NOTE: Kirchhoff's voltage and current laws apply.] EL-0075 A. 110.4 volts B. 112.2 volts C. 113.3 volts D. 114.8 volts

Description : If the total source voltage of the three-wire distribution system shown in the illustration is 240 volts, what is the voltage across load L1? [NOTE: Kirchhoff's voltage and current laws apply.] EL-0075 A. 110.4 volts B. 112.2 volts C. 113.3 volts D. 114.8 volts

Last Answer : Answer: D

If the total source voltage of the three-wire distribution system shown in the illustration is 240 volts, what is the voltage across load L2? [NOTE: Kirchhoff's voltage and current laws apply.] EL-0075 A. 110.4 volts B. 112.2 volts C. 113.0 volts D. 114.8 volts

Description : If the total source voltage of the three-wire distribution system shown in the illustration is 240 volts, what is the voltage across load L2? [NOTE: Kirchhoff's voltage and current laws apply.] EL-0075 A. 110.4 volts B. 112.2 volts C. 113.0 volts D. 114.8 volts

Last Answer : Answer: C

If the total source voltage of the three-wire distribution system shown in the illustration is 240 volts, what is the voltage across load L3? [NOTE: Kirchhoff's voltage and current laws apply.] EL-0075 A. 110.4 volts B. 112.2 volts C. 113.0 volts D. 114.8 volts

Description : If the total source voltage of the three-wire distribution system shown in the illustration is 240 volts, what is the voltage across load L3? [NOTE: Kirchhoff's voltage and current laws apply.] EL-0075 A. 110.4 volts B. 112.2 volts C. 113.0 volts D. 114.8 volts

Last Answer : Answer: B

Applying a reverse bias to the gate of an FET has what effect?

Description : Applying a reverse bias to the gate of an FET has what effect?

Last Answer : Source-to-drain resistance increases.

What is the result of applying power to a calorimeter?

Description : What is the result of applying power to a calorimeter?

Last Answer : As power is applied, the medium heats up in proportion to the applied power.

What do the dotted lines connecting C1, C2, C5, and C6 indicate?

Description : What do the dotted lines connecting C1, C2, C5, and C6 indicate?

Last Answer : The dotted lines indicate that these capacitors are "ganged" and are tuned together with a single control.

What does the number "2" (before the letter "N") indicate in the JAN marking scheme?

Description : What does the number "2" (before the letter "N") indicate in the JAN marking scheme?

Last Answer : the number of junctions in the device, which in this case indicates a transistor.

Does 1:5 indicate a step-up or step-down transformer?

Description : Does 1:5 indicate a step-up or step-down transformer?

Last Answer : Step up.

Does 1:5 indicate a step-up or step-down transformer?

Description : Does 1:5 indicate a step-up or step-down transformer?

Last Answer : Step up

In a TDX system with standard synchro connections, the TX rotor is at 120º and the TDX rotor is at 40º. What position will the TR indicate?

Description : In a TDX system with standard synchro connections, the TX rotor is at 120º and the TDX rotor is at 40º. What position will the TR indicate?

Last Answer : . 80º.

In the add mode, what does the output of C2 indicate?

Description : In the add mode, what does the output of C2 indicate?

Last Answer : . MSD of the sum.

Does low ripple voltage indicate good or bad filtering?

Description : Does low ripple voltage indicate good or bad filtering?

Last Answer : Good.

What does the letter "N" indicate in the semiconductor identification system?

Description : What does the letter "N" indicate in the semiconductor identification system?

Last Answer : A semiconductor.

Does low ripple voltage indicate good or bad filtering?

Description : Does low ripple voltage indicate good or bad filtering?

Last Answer : Good.

What does each generation of computer systems indicate?

Description : What does each generation of computer systems indicate?

Last Answer : Significant change in computer design.