The right-hand rule for motors is used to find the relationship between what motor characteristics?

The right-hand rule for motors is used to find the  relationship between what motor characteristics?
by

1 Answer

Answer :

Direction of conductor movement (rotation), direction of flux, and  the direction of current flow.
by

Related questions

Regenerative braking (A) Can be used for stopping a motor. (B) Cannot be easily applied to DC series motors. (C) Can be easily applied to DC shunt motors (D) Cannot be used when motor load has overhauling characteristics.

Description : Regenerative braking (A) Can be used for stopping a motor. (B) Cannot be easily applied to DC series motors. (C) Can be easily applied to DC shunt motors (D) Cannot be used when motor load has overhauling characteristics.

Last Answer : Ans: B Because reversal of Ia would also mean reversal of field and hence of Eb

Flemings right hand rule is used to find the direction of the – (1) Alternate current (2) Direct current (3) Induced current (4) Actual current

Description : Flemings right hand rule is used to find the direction of the – (1) Alternate current (2) Direct current (3) Induced current (4) Actual current

Last Answer : (3) Induced current Explanation: Fleming's right hand rule shows the direction of induced current when a conductor moves in a magnetic field. The right hand is held with the thumb, first ... finger mutually perpendicular to each other. The rule is named after British engineer John Ambrose Fleming.

Fleming’s right hand rule is used to find the direction of the (1) Alternate current (2) Direct current (3) Induced current (4) Actual current

Description : Fleming’s right hand rule is used to find the direction of the (1) Alternate current (2) Direct current (3) Induced current (4) Actual current

Last Answer : Induced current

State Fleming's left hand rule (motor rule).

Description : State Fleming's left hand rule (motor rule).

Last Answer : If the first three fingers of the left hand are held mutually perpendicular to each other such that the finger points in the direction of magnetic filed, the middle finger points in the direction of current, then the thumb points in the direction of mechanical force acting on the conductor.

Flemings "Left hand Rule" is associated with the effect of – (1) Electric field on current (2) Magnetic field on magnet (3) Electric field on magnet (4) Magnetic Field on current

Description : Flemings "Left hand Rule" is associated with the effect of – (1) Electric field on current (2) Magnetic field on magnet (3) Electric field on magnet (4) Magnetic Field on current

Last Answer : (4) Magnetic Field on current Explanation: Whenever, a current carrying conductor comes under a magnetic field, there will be force acting on the conductor and on the other hand, if a conductor ... conductor. In both of the phenomenon, there is a relation between magnetic field, current and force.

In Fleming's left hand rule, thumb shows direction of A. current B. field C. motion D. charge

Description : In Fleming's left hand rule, thumb shows direction of A. current B. field C. motion D. charge

Last Answer : motion

Flemings “Left hand Rule” is associated with the effect of (1) Electric field on current (2) Magnetic field on magnet (3) Electric field on magnet (4) Magnetic Field on current

Description : Flemings “Left hand Rule” is associated with the effect of (1) Electric field on current (2) Magnetic field on magnet (3) Electric field on magnet (4) Magnetic Field on current

Last Answer : Magnetic Field on current

A portable hand-held and is very handy for determining the power consumption and power factor of individual motors and other inductive devices. a) Voltmeter and wattmeter. b) Wattmeter and power factor meter. c) Light meter and flash meter.

Description : A portable hand-held and is very handy for determining the power consumption and power factor of individual motors and other inductive devices. a) Voltmeter and wattmeter. b) Wattmeter and power factor meter. c) Light meter and flash meter.

Last Answer : Voltmeter and wattmeter.

Which rule implement for axes Nomenclature? a.Left-hand rule b.Right-Hand Rule c.Thumb Rule d.None of the above

Description : Which rule implement for axes Nomenclature? a.Left-hand rule b.Right-Hand Rule c.Thumb Rule d.None of the above

Last Answer : b.Right-Hand Rule

1. Consider a circular loop of wire lying in the plane of the table. Let the current pass through the loop clockwise. Apply the right-hand rule to find out the direction of the magnetic field inside and outside the loop. -Physics-10

Description : 1. Consider a circular loop of wire lying in the plane of the table. Let the current pass through the loop clockwise. Apply the right-hand rule to find out the direction of the magnetic field inside and outside the loop. -Physics-10

Last Answer : Solution: For the downward direction of the current, the direction of the magnetic field will be as if emerging from the table outside the loop and merging with the table inside the loop. Similarly, ... the table outside the loop and merging with the table inside the loop, as shown in the figure.

Fleming is Right Hand Rule is used to find the direction of –

Description : Fleming is Right Hand Rule is used to find the direction of –

Last Answer : Induced Curren

State Fleming's right hand rule or Dynamo rule.

Description : State Fleming's right hand rule or Dynamo rule.

Last Answer : Arrange the first three fingers of the right hand mutually perpendicular to each other; if the fore finger indicates the direction of magnetic field, the thumb in the direction of motion of the conductor, then the middle finger indicates the direction of the induced e.m.f

State ‘Cork screw rule’ and ‘Right hand thumb rule’.

Description : State ‘Cork screw rule’ and ‘Right hand thumb rule’.  

Last Answer : Cork screw rule Direction of magnetic lines of force around a straight current carrying conductor can be determined by these rules. Cork screw rule' says that, the direction of magnetic ... or encircling fingers must be in the direction of magnetic lines of force around the conductor. 

FLEMING’S RIGHT HAND RULE

Description : FLEMING’S RIGHT HAND RULE

Last Answer : “Stretch the thumb, forefingers and middle finger of the right hand so that they are perpendicular to each others. If the forefingers indicates the direction of the magnetic field and thumb shows the direction of motion of the conductor. The middle finger shows the direction of induced current.”

RIGHT HAND THUMB RULE

Description : RIGHT HAND THUMB RULE

Last Answer : “By holding a current carrying straight conductor in your right hand then thumb points towards the direction of current and curled fingers around the conductor will give the direction of magnetic field.”

In the right-hand rule for propagation, the thumb points in the direction of the E field and the forefinger points in the direction of the H field. In what direction does the middle finger point?

Description : In the right-hand rule for propagation, the thumb points in the direction of the E field and the forefinger points in the direction of the H field. In what direction does the middle finger point?

Last Answer : Direction of wave propagation.

Fleming's Right hand rule

Description : Fleming's Right hand rule

Last Answer : Fleming's Right Hand Rule: Stretch out the first three fingers of your right hand such that they are mutually perpendicular to each other. If first finger indicates direction of magnetic field, ... to magnetic field, then the middle finger will indicate the direction of induced EMF / current.

One of the following is not a valid statement: A) Fleming’s right hand rule is used to find out the direction of

Description : One of the following is not a valid statement: A) Fleming's right hand rule is used to find out the direction of current in the conductor of a generator B) Fleming's left hand rule is ... hand thumb rule is used to find out the direction of counter current produced in the armature magnetic field

Last Answer : One of the following is not a valid statement: A) Fleming's right hand rule is used to find out the direction of current in the conductor of a generator B) Fleming's left hand rule is ... hand thumb rule is used to find out the direction of counter current produced in the armature magnetic field

While applying Fleming's right-hand rule to And the direction of induced e.m.f., the thumb points towards?

Last Answer : While applying Fleming's right-hand rule to And the direction of induced e.m.f., the thumb points towards direction of motion of conductor, if forefinger points along the lines of flux.

Fleming's right-hand rule regarding direction of induced e.m.f., correlates?

Last Answer : Fleming's right-hand rule regarding direction of induced e.m.f., correlates magnetic flux, direction of motion and the direction of e.m.f. induced.

According to Fleming's right-hand rule for finding the direction of induced e.m.f...

Description : According to Fleming's right-hand rule for finding the direction of induced e.m.f., when middle finger points in the direction of induced e.m.f., forefinger will point in the direction of?

Last Answer : According to Fleming's right-hand rule for finding the direction of induced e.m.f., when middle finger points in the direction of induced e.m.f., forefinger will point in the direction of lines of force.

What is the difference between Fleming's right and left hand rule?

Description : What is the difference between Fleming's right and left hand rule?

Last Answer :  Fleming's right hand rule is use for generators and  Fleming's left hand rule is use for motors. In both rules thumb represent motion of conductor, fore finger represent magnetic field and middle finger represents current.

Which of the following operating characteristics for DC motors is considered to give high starting torque? A. series B. shunt C. cumulative-compound D. differential-compound

Description : Which of the following operating characteristics for DC motors is considered to give high starting torque? A. series B. shunt C. cumulative-compound D. differential-compound

Last Answer : Answer: A

As shown in the illustration, the electrical symbol is used to indicate which of the listed types of motors? EL-0054 A. Shunt motor. B. Series motor. C. Compound motor. D. Tri-field motor.

Description : As shown in the illustration, the electrical symbol is used to indicate which of the listed types of motors? EL-0054 A. Shunt motor. B. Series motor. C. Compound motor. D. Tri-field motor.

Last Answer : Answer: C

Which of the listed motors will operate at the highest RPM, assuming that each operates at the same frequency? A. A four-pole synchronous motor under normal load. B. A four-pole induction motor under no load. C. A six-pole synchronous motor under normal load. D. A six-pole induction motor under full load.

Description : Which of the listed motors will operate at the highest RPM, assuming that each operates at the same frequency? A. A four-pole synchronous motor under normal load. B. A four-pole induction motor under ... A six-pole synchronous motor under normal load. D. A six-pole induction motor under full load.

Last Answer : Answer: A

Some large A.C. motors are equipped with with heaters. These could be ___________. I. resistance heaters bolted directly to the frame II. low voltage windings embedded in the motor windings A. I only B. II only C. either I or II D. neither I or II

Description : Some large A.C. motors are equipped with with heaters. These could be ___________. I. resistance heaters bolted directly to the frame II. low voltage windings embedded in the motor windings A. I only B. II only C. either I or II D. neither I or II

Last Answer : Answer: C

An overload in which of the listed motors will result in the illumination of an indicating light at the propulsion control station alarm panel? A. Fuel pump motor B. Steering motor C. Condensate pump motor D. Forced draft blower motor

Description : An overload in which of the listed motors will result in the illumination of an indicating light at the propulsion control station alarm panel? A. Fuel pump motor B. Steering motor C. Condensate pump motor D. Forced draft blower motor

Last Answer : Answer: B

If a unloaded shunt motor's field were weakened by rheostat resistance or by an open circuit, the motor would _________. A. overspeed due to reduced CEMF B. stop because of low flux C. continue to run at base speed D. slow down and overheat

Description : If a unloaded shunt motor's field were weakened by rheostat resistance or by an open circuit, the motor would _________. A. overspeed due to reduced CEMF B. stop because of low flux C. continue to run at base speed D. slow down and overheat

Last Answer : Answer: A

Routine A.C. motor maintenance should include periodic ______________. A. thermometer readings at normal loads to detect abnormal temperature rises B. inspection of the motor's internals for loose rotor bars or field poles C. bearing replacement each year using sealed units if available D. all of the above

Description : Routine A.C. motor maintenance should include periodic ______________. A. thermometer readings at normal loads to detect abnormal temperature rises B. inspection of the motor's internals for loose rotor bars ... C. bearing replacement each year using sealed units if available D. all of the above

Last Answer : Answer: A

As shown in the illustration, the D.C. motor's direction of rotation in changed by changing the _________________. EL-0101 A. polarity of the generator field B. direction of three-phase motor rotation C. direction of generator rotation D. polarity of the motor field

Description : As shown in the illustration, the D.C. motor's direction of rotation in changed by changing the _________________. EL-0101 A. polarity of the generator field B. direction of three-phase motor rotation C. direction of generator rotation D. polarity of the motor field

Last Answer : Answer: A

The air gap provided in induction motors should be checked periodically with a feeler gage to detect an unequal air gap and _____________. A. decreased motor magnetizing current B. hysteresis loses C. increased power factor D. mechanical damage to the rotor

Description : The air gap provided in induction motors should be checked periodically with a feeler gage to detect an unequal air gap and _____________. A. decreased motor magnetizing current B. hysteresis loses C. increased power factor D. mechanical damage to the rotor

Last Answer : Answer: D

The most common source of excitation for synchronous motors is a/an _____________. A. low voltage battery B. motor attenuator set C. DC exciter generator D. AC supply

Description : The most common source of excitation for synchronous motors is a/an _____________. A. low voltage battery B. motor attenuator set C. DC exciter generator D. AC supply

Last Answer : Answer: C

Autotransformer starters or compensators are sometimes used with polyphase induction motors to _____________. A. reduce the voltage applied to the motor during the starting period B. increase the voltage for 'across-the-line starting' C. provide a backup means of voltage regulation for emergency starting D. allow the voltage to be either stepped up or down, depending on the application, to ensure full torque

Description : Autotransformer starters or compensators are sometimes used with polyphase induction motors to _____________. A. reduce the voltage applied to the motor during the starting period B. increase the voltage for ' ... to be either stepped up or down, depending on the application, to ensure full torque

Last Answer : Answer: A

Slip ring induction motor advantages and disadvantages compared to squirrel cage motors?

Description : Slip ring induction motor advantages and disadvantages compared to squirrel cage motors?

Last Answer : Advantages: High starting torque with low starting current Smooth acceleration under heavy loads No abnormal heating during starting Good running characteristics after external rotor resistances are cut out ... cage motors The speed regulation is poor when run with resistance in the rotor circuit

In what way synchronous motor is different from other motors?

Description : In what way synchronous motor is different from other motors?

Last Answer : All dc and ac motors work on the same principle. Synchronous motor operates due to magnetic locking taking place between stator and rotor magnetic fields.

In a D.C. 3-wire distributor using balancers and having unequal loads on the two sides (a) both balancers run as generators (b) both balancers run as motors (c) balancer connected to lightly- loaded side runs as a motor (d) balancer connected to heavily- loaded side runs as a motor

Description : In a D.C. 3-wire distributor using balancers and having unequal loads on the two sides (a) both balancers run as generators (b) both balancers run as motors (c) balancer connected to lightly- loaded side runs as a motor (d) balancer connected to heavily- loaded side runs as a motor

Last Answer : (c) balancer connected to lightly- loaded side runs as a motor

As compared to shunt and compound DC motors, the series DC motor will have the highest torque because of its comparatively ____________ at the start. (A) Lower armature resistance. (B) Stronger series field. (C) Fewer series turns. (D) Larger armature current.

Description : As compared to shunt and compound DC motors, the series DC motor will have the highest torque because of its comparatively ____________ at the start. (A) Lower armature resistance. (B) Stronger series field. (C) Fewer series turns. (D) Larger armature current.

Last Answer : (D) Larger armature current.

Which of the following problem arises in D.C. motors which are fed from thyristor bridge circuits ? (a) Increased I R losses (b) Increased core losses (c) Poor commutation (d) Change in motor parameters (e) All of the above

Description : Which of the following problem arises in D.C. motors which are fed from thyristor bridge circuits ? (a) Increased I R losses (b) Increased core losses (c) Poor commutation (d) Change in motor parameters (e) All of the above

Last Answer : (e) All of the above

Explain the following Energy conservation methods of electrical motor : (a) Rewinding of motors (b) Operating in star mode

Description : Explain the following Energy conservation methods of electrical motor : (a) Rewinding of motors (b) Operating in star mode

Last Answer : Energy conservation methods of an electric motor:  (a) Rewinding of motors: i) During rewinding by preserving the original winding characteristics (material quality, design and structure). It is ... in the lines also reduces leading to lower copper losses in motor and decrease line losses.

As compared to shunt and compound motors, series motor has the highest torque...

Description : As compared to shunt and compound motors, series motor has the highest torque because of its comparatively .......... at the start.

Last Answer : As compared to shunt and compound motors, series motor has the highest torque because of its comparatively stronger series field at the start.

1. State Fleming’s left-hand rule. -Physics-10

Description : 1. State Fleming’s left-hand rule. -Physics-10

Last Answer : Fleming’s Left hand rule states that if we arrange our thumb, forefinger and middle finger of the left hand at right angles to each other, then the thumb points towards the ... points towards the direction of magnetic field and the middle finger points towards the direction of current.

FLEMING’S LEFT HAND RULE

Description : FLEMING’S LEFT HAND RULE

Last Answer : FLEMING'S LEFT HAND RULE:  Stretch the forefinger, the central finger and thumb of your left hand mutually perpendicular to each other. If the forefinger shows the direction of the field and central ... of the current then the thumb will point towards the direction of the motion of the conductor.

In the left hand rule, forefinger always represents (a) voltage (b) current (c) magnetic field (d) direction of force on the conductor

Description : In the left hand rule, forefinger always represents (a) voltage (b) current (c) magnetic field (d) direction of force on the conductor

Last Answer : (c) magnetic field

The left hand rule correlates to (a) current, induced e.m.f. and direction of force on a conductor (b) magnetic field, electric field and direction of force on a conductor (c) self induction, mutual induction and direction of force on a conductor (d) current, magnetic field and direction of force on a conductor

Description : The left hand rule correlates to (a) current, induced e.m.f. and direction of force on a conductor (b) magnetic field, electric field and direction of force on a conductor (c) self induction, ... and direction of force on a conductor (d) current, magnetic field and direction of force on a conductor

Last Answer : (d) current, magnetic field and direction of force on a conductor

Fleming's left hand rule is used to find (a) direction of magnetic field due to current carrying conductor (b) direction of flux in a solenoid (c) direction of force on a current carrying conductor in a magnetic field (d) polarity of a magnetic pole

Description : Fleming's left hand rule is used to find (a) direction of magnetic field due to current carrying conductor (b) direction of flux in a solenoid (c) direction of force on a current carrying conductor in a magnetic field (d) polarity of a magnetic pole

Last Answer : (c) direction of force on a current carrying conductor in a magnetic field

When using the tight-hand rule to determine precession, which finger indicates the direction of the applied force?

Description : When using the tight-hand rule to determine precession, which finger indicates the direction of the applied force?

Last Answer : Middle finger.

Fleming’s left hand rule is applicable to

Description : Fleming’s left hand rule is applicable to

Last Answer : Fleming’s left hand rule is applicable to dc motor

Fleming's left hand rule is used to find ___________.

Last Answer : Fleming's left hand rule is used to find direction of force on a current carrying conductor in a magnetic field