Calculate the diameter in MILS of a conductor that has a  diameter of 0.375 inch.

1 Answer

Answer :

375 mils (move the decimal three places to the right).

Related questions

Description : A bus bar is 3 inches wide and 0.375 inches thick. What size of round conductor (in circular mils) is necessary to carry the same current as the bus bar? A. 1,125,000 circular mils B. 1,250,000 circular mils C. 1,432,000 circular mils D. 1,547,000 circular mils

Last Answer : Answer: C

Description : Which wire has the least resistance? Wire A-copper, 1000 circular mils, 6 inches long. Wire B-copper, 2000 circular mils, 11 inches long.

Last Answer : Wire B.

Description : A bed of spherical particles (specific gravity 2.5) of uniform size 1500 μm is 0.5 m in diameter and 0.5 m high. In packed bed state, the porosity may be taken as 0.4. Ergun's equation for the above fluid-particle ... fluidisation velocity, VOM is (A) 12 mm/s (B) 16 mm/s (C) 24 mm/s (D) 28 mm/s

Last Answer : (B) 16 mm/s

Description : A bed of spherical particles (specific gravity 2.5) of uniform size 1500 μm is 0.5 m in diameter and 0.5 m high. In packed bed state, the porosity may be taken as 0.4. Ergun's equation for the above fluid-particle system ... What is the porosity of the fluidised bed? (A) 0.2 (B) 0.5 (C) 0.7 (D) 0.8

Last Answer : (C) 0.7

Description : List the three factors used to calculate resistance of a particular conductor in ohms.

Last Answer : Length, cross-sectional area, and specific resistance of a unit volume of the substance from which the conductor is made

Description : Calculate the most appropriate unit cost for a distribution division of a multinational company using the following information. Miles travelled 636,500 Tonnes carried 2,479 Number of drivers 20 Hours worked by drivers 35,520 Tonnes miles ... 800 (a) Rs .88 (b) Rs 1.50 (c) Rs 15.84 (d) Rs28, 140

Last Answer : (d) Rs28, 140

Description : The cross-sectional area of shipboard electrical cable is expressed in _____________. A. millimeters B. gage numbers C. centimeters D. circular mils

Last Answer : Answer: D

Description : What is the unit of light wavelength? ∙ a. Micrometer ∙ b. Angstroms ∙ c. Mils ∙ d. Fathom

Last Answer : ∙ b. Angstroms

Description : Optical fibers for telecommunications are typically about _____ mils thick and consists of a glass core, a glass cladding of lower index of refraction, and a protective coating ∙ a. 5 ∙ b. 6 ∙ c. 7 ∙ d. 8

Last Answer : ∙ a. 5

Description : To calculate the ideal body weight for a woman, the nurse allows a) 100 pounds for 5 feet of height. To calculate the ideal body weight of a woman, the nurse allows 100 pounds for 5 feet of height and adds ... man. d) 80 pounds for 5 feet of height. Eighty pounds for 5 feet of height is too little.

Last Answer : a) 100 pounds for 5 feet of height. To calculate the ideal body weight of a woman, the nurse allows 100 pounds for 5 feet of height and adds 5 pounds for each additional inch over 5 feet

Description : Why should wire be stripped 1/32 inch longer than the depth of the solder barrel?

Last Answer : To prevent burning the insulation during the soldering process and to allow the wire to flex easier at a stress point.

Description : The amount of data that can be stored on a linear inch of tape is known by what term?

Last Answer : Recording density.

Description : Calculate the skin depth of a conductor, having a conductivity of 200 units. The wave frequency is 10 GHz in air. a) 355.8 b) 3.558 c) 35.58 d) 0.3558

Last Answer : a) 355.8

Description : Calculate the phase constant of a conductor with attenuation constant given by 0.04 units. a) 0.02 b) 0.08 c) 0.0016 d) 0.04

Last Answer : d) 0.04

Description : Calculate the flux density due to a circular conductor of radius 100nm and current 5A in air. a) 10 b) 100 c) 0.1 d) 1

Last Answer : a) 10

Description : A screw jack has 4 threads per inch. The mean radius of the thread is 2.338 inches. The mean diameter of the bearing surface under the cap is 3.25 inches. What is the turning moment required to raise the bload of 150 kg ( a.5.61 kg-inch b.50.6 kg-inch c.107 dynes d.30.3 kg-inch e.23.6 kg-inch

Last Answer : b. 50.6 kg-inch

Description : ID outdoor plant w purple green flowers at the top, has no leaves and thick stem about an inch in diameter?

Last Answer : List of Plants With Purple & Green Leaves Plants with purple and green leaves lend a unifying feel. Persian Shield (Stobilianthes dyeranus) Persian shield plants grow in full sun or light shade. The ... . The leaves are dark green, with a purple metallic tinge on top and deeper purple underneath.

Description : How many cubic inches 3 inch diameter pipe 8 ft long?

Last Answer : how many cubic inches in a 3 inch diameter pipe 8 ft long

Description : If a circle has a circumference of 132 inch what is the diameter?

Last Answer : Diameter of circle: 132/pi = 42 inches rounded to the nearestwhole number

Description : How many square inches in a 8 inch diameter circle?

Last Answer : Area = pi*42 = 50.265 square inches to 3 decimal places

Description : How big is 15.5 inch diameter?

Last Answer : It is a diameter of 39.37 cm.

Description : How big is 15.5 inch diameter?

Last Answer : It is a diameter of 39.37 cm.

Description : How far will a 26 inch diameter bicycle tire travel each time it turns?

Last Answer : 81.7 inches

Description : An automatic ice-cream scoop serves spherical helpings of ice cream. The scoop can be adjusted to serve helpings from 1 inch in diameter to 2 inches in diameter. If Tim orders a scoop with a 2-inch diameter, and if Paul wants only half as much ice cream?

Last Answer : THE ANSWER IS 2BECAUSE..... We have to use Tim's scoop radius to calculate his scoop volume, then divide it by 2 to find Paul's scoop volume and finally calculate its radius to get the diameter. Tim's scoop radius ... to write, 4/3*pi* radius cubed= 4/6*pi(i.e. Paul's scoop volume and the volume o

Description : A conductor with a cross-sectional area of one circular mil would have a diameter of _____________. A. 0.1 inches B. 0.01 inches C. 0.001 inches D. 0.0001 inches

Last Answer : Answer: C

Description : What is the characteristic impedance of a coaxial line with the following data: inner diameter = 0.2 in., center conductor diameter = 0.06 in., insulation = Teflon. A. 200Ω B. 75Ω C. 50Ω D. 150Ω

Last Answer : C. 50Ω

Description : Is 0.625 greater than 0.375?

Last Answer : Need answer

Description : What is grater 0.6 or 0.375?

Last Answer : 0.6 is greater than 0.375

Description : Which is greater 0.5 or 0.375?

Last Answer : 0.5 is greater than 0.375

Description : Which is bigger 0.472441 inches or 0.375 inches?

Last Answer : It is the 1st one 0.472441 inches

Description : The slope correction for a length of 30 m along a gradient of 1 in 20, is  (A) 3.75 cm  (B) 0.375 cm  (C) 37.5 cm  (D) 2.75 cm

Last Answer : (A) 3.75 cm 

Description : If dry density, water density and specific gravity of solids of a given soil sample are 1.6 g/cc, 1.84 g/cc and 2.56 respectively, the porosity of the soil sample, is (A) 0.375 (B) 0.370 (C) 0.380 (D) 0.390

Last Answer : (A) 0.375

Description : The coefficient of discharge for an external mouthpiece is (A) 0.375 (B) 0.5 (C) 0.707 (D) 0.855

Last Answer : Answer: Option D

Description : A certain fluid is flowing in a 0.5m x 0.3 channel at the rate of 3 m/s and has a specific volume of 0.012 m³/kg. Determined the mass of water flowing in kg/s.  a. 267 kg/s  b. 378 kg/s  c. 375 kg/s  d. 456.5 kg/s m = Aν/V

Last Answer : 375 kg/s

Description : What is the shear stress acting along the neutral axis, over a triangular section? a. 2.66 (S/bh) b. 1.5 (S/bh) c. 0.375 (S/bh) d. None of the above

Last Answer : a. 2.66 (S/bh)

Description : The resistance of a conductivity wire of length 1.1 m and of diameter 0.14 mm is `30 Omega`. Calculate its resistivity.

Last Answer : The resistance of a conductivity wire of length 1.1 m and of diameter 0.14 mm is `30 Omega`. Calculate its resistivity.

Description : If 8 bolts are emplaced in a clamp coupling with shaft diameter 80mm d, calculate the diameter of each bolt if coefficient of friction is 0.3 and torque transmitted is 4000N-m. Permissible tensile stress is 80N/mm2. a) 27mm b) 25mm c) 23mm d) 21mm

Last Answer : a) 27mm

Description : If 8 bolts are emplaced in a clamp coupling with shaft diameter 80mm d, calculate the tensile force on each bolt if coefficient of friction is 0.3 and torque transmitted is 4000N-m. a) 51234.4N b) 45968.3N c) 41666.7N d) None of the listed

Last Answer : c) 41666.7N

Description : Calculate the shaft diameter on rigidity basis if torsional moment is 196000N-mm, length of shaft is 1000mm. Permissible angle of twist per meter is 0.5’ and take G=79300N/mm2. a) None of the listed b) 41.2mm c) 35.8mm d) 38.8mm

Last Answer : b) 41.2mm

Description : A cantilever shaft has a diameter of 6 cm and the length is 40cm, it has a disc of mass 125 kg at its free end. The Young’s modulus for the shaft material is 250 GN/m2. Calculate the static deflection in nm. a) 0.001 b) 0.083c) 1.022 d) 0.065

Last Answer : a) 0.001

Description : A butt weld has been made by MMA in a 50mm thick impact tested steel plate. The welding electrode used was a basic type, 5mm diameter. The measured welding parameters for one of the runs was 250 amps, 24 volts, using DC ... given to calculate the arc energy b) 1.9 kJ/mm c) 1.87 kJ/mm d) 2.0 kJ/mm

Last Answer : d) 2.0 kJ/mm

Description : Calculate the shaft diameter on rigidity basis if torsional moment is 196000N-mm, length of shaft is 1000mm. Permissible angle of twist per meter is 0.5’ and take G=79300N/mm². a) None of the listed b) 41.2mm c) 35.8mm d) 38.8mm

Last Answer : b) 41.2mm

Description : Calculate the attenuation constant of a conductor of conductivity 200 units, frequency 1M radian/s in air. a) 11.2 b) 1.12 c) 56.23 d) 5.62

Last Answer : a) 11.2

Description : Calculate the velocity of wave propagation in a conductor with frequency 5 x 10 8 rad/s and phase constant of 3 x 10 8 units. a) 3/5 b) 15 c) 5/3 d) 8

Last Answer : c) 5/3

Description : Calculate the magnetic field at a point on the centre of the circular conductor of radius 2m with current 8A. a) 1 b) 2 c) 3 d) 4

Last Answer : b) 2

Description : Calculate the potential when a conductor of length 2m is having an electric field of 12.3units. a) 26.4 b) 42.6 c) 64.2 d) 24.6

Last Answer : d) 24.6

Description : How much of the stripped length of a conductor should be tinned?

Last Answer : One-half the stripped length.

Description : For an electric field to exist at the surface of a conductor, the field must have what angular relationship to the conductor?

Last Answer : The field must be perpendicular to the conductors.

Description : What causes the current-carrying area at the center conductor of a coaxial line to be restricted to a small layer at the surface?

Last Answer : Skin effect.

Description : What is the purpose of the green conductor in a power tool or electrical appliance cable?

Last Answer : To prevent electrical shock to the operator in case there is an electrical short to the frame of the appliance or too.