What two characteristics of IC synchros cause them to  differ from standard synchros?

1 Answer

Answer :

Direction of rotation and amount of torque.

Related questions

Description : Where are the external connections made on standard synchros?

Last Answer : At the terminal board.

Description : How do the two types of monolithic IC construction differ?

Last Answer : Diffusion penetrates substrate; epitaxial does not

Description : What are the two types of differential synchros?

Last Answer : The TDX and the TDR.

Description : Using table 1-1, name two synchros that provide a mechanical output.

Last Answer : The torque receiver (TR) and the torque differential receiver (TDR).

Description : What type of synchros usually require the use of synchro capacitors?

Last Answer : TDXs, CDXs, and Cts.

Description : What are the three types of control synchros?

Last Answer : CX, CT, and CDX.

Description : What is the purpose of using differential synchros instead of regular synchros?

Last Answer : Differential synchros can handle more signals than regular synchros and also perform addition and subtraction functions.

Description : What type of equipment normally uses 26-volt 400-hertz synchros?

Last Answer : . Aircraft.

Description : Compare the power sources of synchros and step transmission systems.

Last Answer : Synchros use ac; step transmission uses dc.

Description : Name the two types of monolithic IC construction discussed.

Last Answer : Diffusion; epitaxial growth

Description : What are the two logic states of an IC?

Last Answer : A "1" or "0."

Description : What is the purpose of the IC package?

Last Answer : Protect the IC from damage; make handling easier.

Description : What is a hybrid IC?

Last Answer : Combination of monolithic and film elements.

Description : What are the basic steps in manufacturing an IC?

Last Answer : Circuit design, component placement, suitable substrate, and depositing proper materials on substrate.

Description : What is a hybrid IC?

Last Answer : Combination of monolithic ICs and film components.

Description : Why should you consider an IC as a black box?

Last Answer : ICs cannot be repaired. All you need to test is output versus input.

Description : What is Synchros?

Last Answer : Synchros is a device used to convert an angular motion to an electrical signal or vice versa.

Description : Which of the following statement is not correct with respect to alcohols as alternate fuel in IC engines a) anti-knock characteristics of alcohol is poor b) alcohol contains about half the heat ... /litre c) alcohol does not vaporize as easily as gasoline d) alcohols are corrosive in nature

Last Answer : Answer: a Explanation: Anti-knock characteristics of alcohol is good.

Description : How do the CX and CDX differ from the TX and TDX?

Last Answer : The CX and CDX have higher impedance windings

Description : How do electromechanical computers differ from the mechanical computers?

Last Answer : Electromechanical computers use electrical components to perform some of the calculations.

Description : How do monolithic ICs differ from film ICs?

Last Answer : Monolithic ICs contain active and passive elements. Film ICs contain only passive elements

Description : In what way do magnetic lines of force differ from electrostatic lines of force?

Last Answer : Electrostatic lines of force do not form closed loops

Description : How do FM record electronics differ from AM (direct record) electronics?

Last Answer : Instead of recording the signal just as it appears at the recorder’s input, FM record electronics records a frequency-modulated carrier signal from a record oscillator (figure 5-4) onto the magnetic tape

Description : How does a magnetic drum differ from a magnetic disk?

Last Answer : The tracks in which the data is stored are assigned to channels that form circular bands around the drum.

Description : How does the current-diode detector differ from the voltage-diode detector?

Last Answer : The current-diode detector is in parallel with the input and load.

Description : The CIC/IC his resignation letter should be made to a) The chief justice of India b) The prime minister c) The president d) Any one of them

Last Answer : c) The president

Description : what are different three main IC Technologies? discuss the advantages of each of them.

Last Answer : The three different IC technologies are 1.Full custom VLSI2.Semi-custom ASIC3.Programmable Logic Devices (PLD)The advantages of each of them are as follows :1. Full custom VLSIAll ... Logic devices are available instantly.In PLD there is not customised logic cell or mask layer.

Description : What characteristics differ in the three p orbitals?

Last Answer : What is the answer ?

Description : Which of these characteristics of a missle differ from a rocket?

Last Answer : Missiles have a guidance system

Description : Storage and memory differ with respect to which of the following characteristics? 1) Reliability 2) Speed 3) Price 4) All of these

Last Answer : 4) All of these

Description : Storage and memory differ with respect to which of the following characteristics? 1 Reliability 2 Speed 3 Price 4 All of these

Last Answer : 4 All of these

Description : How does a television signal differ from a standard radio waves?

Last Answer : it operates at a much higher diffrence

Description : The display screen of a spectrum analyzer presents a graphic plot of what two signal characteristics?

Last Answer : Power and frequency.

Description : At very high frequencies, what characteristics are displayed by ordinary insulators?

Last Answer : The characteristics of the dielectric of a capacitor.

Description : What are the three basic characteristics of sound

Last Answer : Pitch, intensity, and quality.

Description : In addition to a flat top, what characteristics must a modulator pulse have?

Last Answer : Steep leading and trailing edges.

Description : The actions of the tr and atr circuits depend on the impedance characteristics of what length of transmission line?

Last Answer : Quarter-wavelength section

Description : In addition to a flat top, what characteristics must a modulator pulse have?

Last Answer : Steep leading and trailing edges.

Description : When you are testing an inductor with a Hay bridge, the characteristics of the inductor are compared with what type of device?

Last Answer : A standard capacitor

Description : What five characteristics do applications using plastic clad silica (PCS) and all-plastic fibers typically have?

Last Answer : High NA, low bandwidth, tight bend radius, short length, and low cost.

Description : What are the most distinguishing characteristics of a multimode graded-index fiber?

Last Answer : Source-to-fiber coupling efficiency and insensitivity to microbending and macrobending losses.

Description : When designing vacuum-tube circuits, what characteristics of tubes must be taken into consideration?

Last Answer : Differences in performance of tubes of the same type

Description : What characteristics do all ferromagnetic materials have in common?

Last Answer : The relative ease with which they are magnetized

Description : What are the four basic receiver characteristics?

Last Answer : Sensitivity, noise, selectivity, and fidelity.

Description : State what happens to the insulating characteristics of asbestos when it gets wet.

Last Answer : It will become a conductor.

Description : State four characteristics of electrostatic lines of force

Last Answer : a charged particle in straight lines and do not form closed loops. c. They have the ability to pass through any known material. d. They have the ability to distort the orbits of electrons circling the nucleus.

Description : State four characteristics of electrostatic lines of forceNEETS

Last Answer : a. They are polarized from positive to negative. b. They radiate from a charged particle in straight lines and do not form closed loops. c. They have the ability to pass through any known material. d. They have the ability to distort the orbits of electrons circling the nucleus.

Description : What characteristics of a pulse can be changed in pulse time modulation?

Last Answer : The time duration of the pulses or the time of occurrence of the pulses.