What are three possible causes of even-order harmonics?

What are three possible causes of even-order harmonics?
by

1 Answer

Answer :

a. Permanently magnetized heads.  
 b. Faulty circuitry.  
 c. Asymmetrical bias signal.
by

Related questions

What is the fundamental difference between the phase relationship of the harmonics of the square wave as compared to the harmonics of a peaked wave?

Description : What is the fundamental difference between the phase relationship of the harmonics of the square wave as compared to the harmonics of a peaked wave?

Last Answer : All the odd harmonics are in phase with the fundamental in the square wave. This is not true of the odd harmonics in the peaked wave.

A push pull amplifier balances out A) Odd harmonics B) Even harmonics C) Both odd as well as even harmonics D) Neither odd nor even harmonics.

Description : A push pull amplifier balances out A) Odd harmonics B) Even harmonics C) Both odd as well as even harmonics D) Neither odd nor even harmonics.

Last Answer : A) Odd harmonics

What are the main causes of harmonics?

Description : What are the main causes of harmonics?

Last Answer : Harmonic is a non linear load because linear load voltage deviated due to connection of some electrinie device such as converter,inverter

In order to reduce the harmful effects of harmonics on the A.C. side of a high voltage D.C. transmission system ______are provided. (A) synchronous condensers (B) shunt capacitors (C) shunt filters (D) static compensators

Description : In order to reduce the harmful effects of harmonics on the A.C. side of a high voltage D.C. transmission system ______are provided. (A) synchronous condensers (B) shunt capacitors (C) shunt filters (D) static compensators

Last Answer : Ans: C Xc= 1/ ωc

In order to reduce the harmful effects of harmonics on the AC side of a high voltage DC transmission system...

Description : In order to reduce the harmful effects of harmonics on the AC side of a high voltage DC transmission system_____ are provided. (A) synchronous condensers (B) shunt capacitors (C) shunt filters (D) static compensators

Last Answer : In order to reduce the harmful effects of harmonics on the AC side of a high voltage DC transmission system shunt filters are provided. 

A tape pack is buckled and deformed as shown in figure 2- 4. What are three possible causes for this condition?

Description : A tape pack is buckled and deformed as shown in figure 2- 4. What are three possible causes for this condition?

Last Answer : a. Reel has a distorted hub, b. tape wound over small particle deposited on hub, and c. tape wound on reel with tension increasing toward end of winding.

Harmonics What ?

Last Answer : AC Power Of the system Original Frequency In addition Different Different Frequency Prominent AC Wave Creation Is Him Harmonics Says.

Quality of a musical note depends on – (1) Fundamental frequency (2) Amplitude of the wave (3) Harmonics present (4) Velocity of sound in the medium

Description : Quality of a musical note depends on – (1) Fundamental frequency (2) Amplitude of the wave (3) Harmonics present (4) Velocity of sound in the medium

Last Answer : (3) Harmonics present Explanation: Sound "quality" or "timbre" describes those characteristics of sound which allow the ear to distinguish sounds which have the same pitch and loudness. Timbre is mainly ... and the attack-decay envelope of the sound. Harmonic content is the most important of these.

What do you mean by harmonics?

Description : What do you mean by harmonics?

Last Answer : Definition for a harmonic is-a sinusoidal component of a periodic wave or quantity having a frequency that is an integral multiple of the fundamental frequency. The main sources of ... as they may cause overheating of capacitors and nearby generators and interfere with telecommunication systems.

How harmonics generated in electrical power distribution system?

Description : How harmonics generated in electrical power distribution system?

Last Answer : Harmonic frequencies are integral multiples of the fundamental supply frequency, i.e. for a fundamental of 50 Hz, the third harmonic would be 150 Hz and the fifth harmonic would be 250 ... the corresponding application guides, since the electricity grid's protection system should cut off the fault.

Not a reason for the use of an antenna coupler. A. To make the antenna look resistive B. To provide the output amplifier with the correct load impedance C. To discriminate against harmonics D. To prevent re-radiation of the local oscillator

Description : Not a reason for the use of an antenna coupler. A. To make the antenna look resistive B. To provide the output amplifier with the correct load impedance C. To discriminate against harmonics D. To prevent re-radiation of the local oscillator

Last Answer : D. To prevent re-radiation of the local oscillator

Stacking antenna elements A. increases sensitivity to weak signals B. will suppress odd harmonics C. decrease signal to noise ratio D. increases selectivity

Description : Stacking antenna elements A. increases sensitivity to weak signals B. will suppress odd harmonics C. decrease signal to noise ratio D. increases selectivity

Last Answer : A. increases sensitivity to weak signals

A disadvantage of using a trap antenna. A. It will radiate harmonics B. It can only be used for single-bad operation C. It is too sharply directional at lower frequencies D. It must be neutralized

Description : A disadvantage of using a trap antenna. A. It will radiate harmonics B. It can only be used for single-bad operation C. It is too sharply directional at lower frequencies D. It must be neutralized

Last Answer : A. It will radiate harmonics

What are the disadvantages of the harmonics present in the inverter system?

Description : What are the disadvantages of the harmonics present in the inverter system?

Last Answer : a. Harmonic currents will lead to excessive heating in the induction motors. This will reduce the load carrying capacity of the motor. b. If the control and the regulating circuits are not ... affected. d. On critical loads, torque pulsation produced by the harmonic current can be useful.

The ratio of frequencies is termed. A. interval B. octave C. harmonics D. factor

Description : The ratio of frequencies is termed. A. interval B. octave C. harmonics D. factor

Last Answer : A. interval

A modulation which does not follow the sine wave pattern, it produces undesirable harmonics such as spurious emission A. 0% modulated B. Over-modulated C. Unmodulated D. 100% modulated

Description : A modulation which does not follow the sine wave pattern, it produces undesirable harmonics such as spurious emission A. 0% modulated B. Over-modulated C. Unmodulated D. 100% modulated

Last Answer : B. Over-modulated

What are the reasons for harmonics in the motor?

Description : What are the reasons for harmonics in the motor?

Last Answer : Generally even harmonics are not expected to be present in three phase motors. Triple-n harmonics like 3rd, 9th, 15th etc. are also not expected. The dominant odd harmonics expected are 5th ... harmonic winding faults, short circuits. Hot spots in rotor or stator also may indicate higher harmonics.

Lux meter is used to measure…… a) Illumination level b) Sound intensity and illumination level c) Harmonics d) Speed

Description : Lux meter is used to measure…… a) Illumination level b) Sound intensity and illumination level c) Harmonics d) Speed

Last Answer : Illumination level

Lux meter is used to measure…… c) Illumination level c) Harmonics d) Sound intensity and illumination level d) Speed

Description : Lux meter is used to measure…… c) Illumination level c) Harmonics d) Sound intensity and illumination level d) Speed

Last Answer :  Illumination level

116. Lux meter is used to measure…… a) Illumination level c) Harmonics b) Sound intensity and illumination level d) Speed

Description : Lux meter is used to measure…… a) Illumination level c) Harmonics b) Sound intensity and illumination level d) Speed

Last Answer : Illumination level

Harmonics are eliminated by using a) Skewing of rotor b) Distribution winding c) Short pitch winding d) All of the above

Description : Harmonics are eliminated by using a) Skewing of rotor b) Distribution winding c) Short pitch winding d) All of the above

Last Answer : Ans: All of the above

Which of the following contributes to harmonics distortion in amplifiers? A) Positive feedback B) Presence of noise C) Defective active device D) Non linearity in active device.

Description : Which of the following contributes to harmonics distortion in amplifiers? A) Positive feedback B) Presence of noise C) Defective active device D) Non linearity in active device.

Last Answer : D) Non linearity in active device.

The current carrying capacity of cables in D.C. is more that in A.C. mainly due to (a) absence of harmonics (b) non-existence of any stability limit (c) smaller dielectric loss (d) absence of ripples (e) none of the above

Description : The current carrying capacity of cables in D.C. is more that in A.C. mainly due to (a) absence of harmonics (b) non-existence of any stability limit (c) smaller dielectric loss (d) absence of ripples (e) none of the above

Last Answer : (c) smaller dielectric loss

What is an electronic instrument capable of showing on screen and maybe on print, relative spacing of transmitter carriers, their sidebands and harmonics?

Description : What is an electronic instrument capable of showing on screen and maybe on print, relative spacing of transmitter carriers, their sidebands and harmonics?

Last Answer : Spectrum Analyzer

One ofthe followingis not a reason forthe use of anantenna coupler: a. To make the antenna look resistive b. To provide the output amplifier with the correct load impedance c. To discriminate against harmonics d. To prevent reradiation of the local oscillator

Description : One ofthe followingis not a reason forthe use of anantenna coupler: a. To make the antenna look resistive b. To provide the output amplifier with the correct load impedance c. To discriminate against harmonics d. To prevent reradiation of the local oscillator

Last Answer : d. To prevent reradiation of the local oscillator

72 Harmonics in transformer result in A. Increased core losses B. Increased I2R losses C. Magnetic interference with communication circuits D. All of the above

Description : 72 Harmonics in transformer result in A. Increased core losses B. Increased I2R losses C. Magnetic interference with communication circuits D. All of the above

Last Answer : D. All of the above

10] The main reason for generation of harmonics in a transformer could be A. Fluctuating load B. Poor insulation C. Mechanical vibrations D. Saturation of core

Description : 10] The main reason for generation of harmonics in a transformer could be A. Fluctuating load B. Poor insulation C. Mechanical vibrations D. Saturation of core

Last Answer : D) saturation of core

The introduction of interpoles in between the main pole improves the performance of d.c. machines, because (A) The interpole produces additional flux to augment the developed torque. (B) The flux waveform is improved with reduction in harmonics. (C) The inequality of air flux on the top and bottom halves of armature is removed. (D) A counter e.m.f. is induced in the coil undergoing commutation.

Description : The introduction of interpoles in between the main pole improves the performance of d.c. machines, because (A) The interpole produces additional flux to augment the developed torque. (B) The flux waveform is ... armature is removed. (D) A counter e.m.f. is induced in the coil undergoing commutation.

Last Answer : Ans: D Counter e.m.f is produced, it neutralizes the reactive emf.

Quality of a musical note depends on (1) Fundamental frequency (2) Amplitude of the wave (3) Harmonics present (4) Velocity of sound in the medium

Description : Quality of a musical note depends on (1) Fundamental frequency (2) Amplitude of the wave (3) Harmonics present (4) Velocity of sound in the medium

Last Answer :  Harmonics present

Explain the effect of Harmonics on the Transformer.

Description : Explain the effect of Harmonics on the Transformer.

Last Answer : Effect of Harmonics on the Transformer:  1. Core loss: Harmonic voltage increases the hysteresis and eddy current losses in the lamination. The amount of the core loss depends on ... small core vibrations.  5. Saturation problem: Sometimes additional harmonic voltage causes core saturation.

Slot harmonics are reduced in induction motors by using

Description : Slot harmonics are reduced in induction motors by using (A) fractional-pitch windings (B) fractional-slot windings (C) integral-slot windings (D) distributed windings

Last Answer : Slot harmonics are reduced in induction motors by using fractional-slot windings

The main reason for generation of harmonics in a transformer could be?

Last Answer : The main reason for generation of harmonics in a transformer could be saturation of core.

Harmonics in transformer result in?

Last Answer : Harmonics in transformer result in increased core losses, increased I2R losses, and magnetic interference with communication circuits.

Which cavity of a three-cavity klystron causes most of the velocity modulation?

Description : Which cavity of a three-cavity klystron causes most of the velocity modulation?

Last Answer : The middle cavity.

What are the three causes of mechanical drift in a gyro?

Description : What are the three causes of mechanical drift in a gyro?

Last Answer : Unbalanced gyro, inertia of gimbals, bearing friction

What type of storage can retain its data even if there is a power failure or breakdown?

Description : What type of storage can retain its data even if there is a power failure or breakdown?

Last Answer : Nonvolatile (magnetic core storage and bubble memory are examples).

What causes the nuts or screws that hold the tips on soldering irons and guns to loosen?

Description : What causes the nuts or screws that hold the tips on soldering irons and guns to loosen?

Last Answer : The heating and cooling cycles.

What causes a "fractured solder" joint?

Description : What causes a "fractured solder" joint?

Last Answer : Movement of the parts being soldered while the solder is cooling.

The interaction between an external field and the binding force of an atom causes electrons to do what?

Description : The interaction between an external field and the binding force of an atom causes electrons to do what?

Last Answer : Wobble at a natural resonant frequency.

What interaction causes energy to travel down a waveguide?

Description : What interaction causes energy to travel down a waveguide?

Last Answer : The interaction of the electric and magnetic fields.

What causes the current-carrying area at the center conductor of a coaxial line to be restricted to a small layer at the surface?

Description : What causes the current-carrying area at the center conductor of a coaxial line to be restricted to a small layer at the surface?

Last Answer : Skin effect.

What causes a voltage to be developed across the secondary winding of a transformer?

Description : What causes a voltage to be developed across the secondary winding of a transformer?

Last Answer : The magnetic lines generated by the current in the primary cut

The electron beam in a CRT is made to sweep from left to right across the screen. What tube element causes this sweeping motion?

Description : The electron beam in a CRT is made to sweep from left to right across the screen. What tube element causes this sweeping motion?

Last Answer : The horizontal-deflection plate.

What signal causes FF2 to toggle?

Description : What signal causes FF2 to toggle?

Last Answer : Q output of FF 1 going LOW.

What causes the specified condition to shift position?

Description : What causes the specified condition to shift position?

Last Answer : The input, or clock pulse.

. What causes ionization to occur in the ionosphere?

Description : . What causes ionization to occur in the ionosphere?

Last Answer : High energy ultraviolet light waves from the sun.

what causes the initial and final pulses on the receiver output signal?

Description : what causes the initial and final pulses on the receiver output signal?

Last Answer : Leakage from the duplexer.

The Doppler effect causes a change in what aspect of rf energy that strikes a moving object?

Description : The Doppler effect causes a change in what aspect of rf energy that strikes a moving object?

Last Answer : Frequency.

What are the two common causes of transmission-line deterioration?

Description : What are the two common causes of transmission-line deterioration?

Last Answer : Corrosive effects of salt water and weather extremes.

In fiber-to-fiber connections, Fresnel reflection is one source of coupling losses. Light is reflected back into the source fiber and is lost. What causes Fresnel reflection?

Description : In fiber-to-fiber connections, Fresnel reflection is one source of coupling losses. Light is reflected back into the source fiber and is lost. What causes Fresnel reflection?

Last Answer : A step change in refractive index that occurs at fiber joints, caused by fiber separation.