Which temperature coefficient indicates a material whose  resistance increases as temperature increases?

1 Answer

Answer :

Positive.

Related questions

Description : What term describes a material whose resistance remains relatively constant with changes in temperature?

Last Answer : Zero temperature coefficient.

Description : Define the temperature coefficient of resistance.

Last Answer : The amount of increase in the resistance of a 1-ohm sample of the conductor per degree of temperature rise above 0º C

Description : What type of temperature coefficient material does not produce increased heat in response to increased current flow?

Last Answer : Zero-temperature coefficient.

Description : When temperature rises, resistance of negative temperature coefficient thermistor A. increases B. decreases C. zero D. infinity

Last Answer : decreases

Description : . A full-scale deflection on an ohmmeter scale indicates what resistance between the leads?

Last Answer : Zero.

Description : A full-scale deflection on an ohmmeter scale indicates what resistance between the leads?

Last Answer : Zero.

Description : The temperature coefficient of resistance of the material of a wire is `0.00125^(@)C^(-1)`. Its resistance at `27^(@)C` is `1 Omega`. At what temperat

Last Answer : The temperature coefficient of resistance of the material of a wire is `0.00125^(@)C^(-1)`. Its resistance at ... K B. 1100 K C. 1400 K D. 1127 K

Description : The existing resistance of a conductor is dependent upon its length, cross-sectional area, _____________. A. temperature and insulation B. material and insulation C. resistive coefficient and material D. material and temperature

Last Answer : Answer: D

Description : A semiconductor device made out of a material having very high temperature coefficient of resistance is

Last Answer : A semiconductor device made out of a material having very high temperature coefficient of resistance is Thermistor

Description : The arrow drawn through the resistor shown in the illustration indicates that it is _____________. EL-0086 A. for use in low power applications B. a carbon composition type C. a wire-wound type D. one whose resistance is variable

Last Answer : Answer: D

Description : Define the term negative temperature coefficient.

Last Answer : It is the decrease in a semiconductor’s resistance as temperature rises.

Description : As the dissipated power increases, what effect does this have on the resistance of a thermistor?

Last Answer : . It increases.

Description : According to Ohm’s law, what happens to circuit current if circuit resistance (a) increases, (b) decreases?

Last Answer : (a) Current decreases (b) Current increases

Description : A lead-acid battery is considered fully charged when the ______________. A. electrolyte gasses freely B. battery charger ammeter indicates a positive reading C. terminal voltage reaches a constant value at a ... cells reaches the correct value and no longer increases over a period of 1 to 4 hours

Last Answer : Answer: D

Description : A negative heat of solution indicates that: w) an endothermic dissolving process occurs x) solute solubility increases with rising solution temperature y) solute solubility decreases with rising solution temperature z) super-saturation conditions exist

Last Answer : ANSWER: Y -- SOLUTE SOLUBILITY DECREASES WITH RISING SOLUTION TEMPERATURE

Description : The resistance of material increases with temperature -General Knowledge

Last Answer : The answer is 'Metal'

Description : The resistance of material increases with temperature. What is this? -General Knowledge

Last Answer : answer:

Description : Indicate the false statement about the resistance of a wire – (1) it depends on material of wire (2) it is directly proportional to the length of wire (3) it is directly proportional to the area of crosssection of wire (4) resistance of metallic wire increases with increase in temperature

Last Answer : (3) it is directly proportional to the area of cross-section of wire Explanation: The property of conductor due to which it opposes the flow of current through it is called Resistance. It is ... potential difference across its ends to the current flowing through it The SI unit of resistance is ohm.

Description : The resistance of material increases with temperature. What is this?

Last Answer : Metal

Description : Indicate the false statement about the resistance of a wire (1) it depends on material of wire (2) it is directly proportional to the length of wire (3) it is directly proportional to the area of cross-section of wire (4) resistance of metallic wire increases with increase in temperature

Last Answer :  it is directly proportional to the area of cross-section of wire

Description : For the same heat load and mass flow rate in the tube side of a shell and tube heat exchanger, one may use multipass on the tube side, because it (A) Decreases the pressure drop (B) ... the outlet temperature of cooling medium (C) Increases the overall heat transfer coefficient (D) None of these

Last Answer : (C) Increases the overall heat transfer coefficient

Description : Due to a rise in temperature, the viscosity and the unit weight of the percolating fluid are reduced to 60% and 90% respectively. If other things remain constant, the coefficient of permeability (A) Increases by 25 % (B) Increases by 50 % (C) Increases by 33.3 % (D) Decreases by 33.3 %

Last Answer : (B) Increases by 50 %

Description : Coefficient of permeability of soil (A) Does not depend upon temperature (B) Increases with the increase in temperature (C) Increases with the decrease in temperature (D) None of the above

Last Answer : Answer: Option B

Description : Which subscript, in circular waveguide classification, indicates the number of full-wave patterns around the circumference?

Last Answer : First.

Description : What is the most likely problem if the transmitter shaft reads 0º when the receiver shaft indicates 180º?

Last Answer : The rotor leads on either the transmitter or the receiver are reversed.

Description : On the synchro schematic symbol, what indicates the angular displacement of the rotor?

Last Answer : . The position of the arrow.

Description : In the output of an ac error detector, what indicates the (a) direction and (b) amount of control necessary for correspondence?

Last Answer : (a) Phase. (b) Amplitude.

Description : When using the tight-hand rule to determine precession, which finger indicates the direction of the applied force?

Last Answer : Middle finger.

Description : The temperature coefficient of copper is `0.004^(@)C^(-1)`. Find the resistance of a 5 m long copper wire of diameter 0.2 mm at `100^(@)C`, if the res

Last Answer : The temperature coefficient of copper is `0.004^(@)C^(-1)`. Find the resistance of a 5 m long copper wire of ... `0^(@)C` is `1.7xx10^(-8) Omega` m.

Description : The temperature coefficient of a resistance wire is `0.00 12.5^(@)C^(-1)`. At 300 K, its resistance is `1 Omega`. At what temperature the resistance o

Last Answer : The temperature coefficient of a resistance wire is `0.00 12.5^(@)C^(-1)`. At 300 K, its ... the resistance of the wire will be `2 Omega` ?

Description : The temperature coefficient of resistance of an alloy used for making resistor is

Last Answer : The temperature coefficient of resistance of an alloy used for making resistor is A. small and ... C. large and positive D. large and negative

Description : The resistance of a bulb filmanet is `100Omega` at a temperature of `100^@C`. If its temperature coefficient of resistance be 0.005 per `.^@C`, its re

Last Answer : The resistance of a bulb filmanet is `100Omega` at a temperature of `100^@C`. If its temperature coefficient of ... . `200^(@)C` D. `400^(@)C`

Description : The fractional change in resistance per kelvin is known as, a. temperature coefficient of resistance b. coefficient of Voltage of charge c. thermal expansion d. all of above

Last Answer : a. temperature coefficient of resistance

Description : Semi-conductors have ________ temperature coefficient of resistance. (A) Negative (B) Positive (C) Both positive and negative (D) None of the above

Last Answer : (A) Negative

Description : Problem on temperature coefficient of resistance 3

Last Answer : Problem on temperature coefficient of resistance 3

Description : Problem on temperature coefficient of resistance 2

Last Answer : Problem on temperature coefficient of resistance 2

Description : Problem on temperature coefficient of resistance 1

Last Answer : Problem on temperature coefficient of resistance 1

Description : Which amongst the following has a negative coefficient of temperature for resistance?  a) Copper b) Lead c) Carbon d) Aluminium

Last Answer : Which amongst the following has a negative coefficient of temperature for resistance? Carbon 

Last Answer : The resistance temperature coefficient is defined as the ratio of increase in resistance per degree centigrade to the resistance at 0oC.

Last Answer : A metal resistor has resistance of 10 ohm at 0°C and 11 ohms at 160°C, the temperature coefficient is 0.000625 /°C.

Last Answer : A semiconductor has Negative temperature coefficient of resistance.

Description :  The metal having the lowest temperature coefficient of resistance is

Last Answer : The metal having the lowest temperature coefficient of resistance is gold.

Description : what is the temperature coefficient of Resistance of conductor ?

Last Answer : conductors have positive coefficient. means as the temperature increases resistance also increases.

Description : what is the temperature coefficient of Resistance of semiconductor ?

Last Answer : semiconductors have negative temperature coefficient of resistance. means as the temperature increases resistance decreases.

Description : What effect does flux leakage in a transformer have on the coefficient of coupling (K) in the transformer?

Last Answer : it causes K to be less than unity (I).

Description : What effect does flux leakage in a transformer have on the coefficient of coupling (K) in the transformer?

Last Answer : it causes K to be less than unity (I).

Description : What is meant by the coefficient of coupling?

Last Answer : The ratio of the fines of force produced by one coil to the lines of force that link another coil. It is never greater than one.

Description : Will an optical fiber's attenuation coefficient vary with changes in wavelength?

Last Answer : Yes.

Description : What term is used to describe a situation in which atmospheric temperature first increases with altitude and then begins to decrease?

Last Answer : Temperature inversion.

Description : Will dark current increase or decrease as the temperature of the photodiode increases?

Last Answer : Increase.