Name the three methods of interconnecting components in multilayer printed circuit boards.

Name the three methods of interconnecting components in  multilayer printed circuit boards.
by

1 Answer

Answer :

Clearance hole, plated-through hole, and layer build-up
by

Related questions

What is one of the major disadvantages of multilayer printed circuit boards?

Description : What is one of the major disadvantages of multilayer printed circuit boards?

Last Answer : Difficulty of repair of internal connections.

Multilayer printed circuit board repair is the responsibility of what 2M repair technician?

Description : Multilayer printed circuit board repair is the responsibility of what 2M repair technician?

Last Answer : Microminiature repair technician.

What is the major disadvantage of printed circuit boards?

Description : What is the major disadvantage of printed circuit boards?

Last Answer : Components soldered in place.

List the major advantages of printed circuit boards.

Description : List the major advantages of printed circuit boards.

Last Answer : Eliminate heavy chassis and point-to-point wiring

Which topology (bus, ring, star, or tree) has a center hub interconnecting the equipments?

Description : Which topology (bus, ring, star, or tree) has a center hub interconnecting the equipments?

Last Answer : Star.

When does most printed circuit board damage occur?

Description : When does most printed circuit board damage occur?

Last Answer : During disassembly or repair.

.Interconnecting the cloud computing environments of two or more service providers is called as a) Cloud Federation b) Intra Cloud c) Cloud Provisioning d) Cloud Connecting

Description : .Interconnecting the cloud computing environments of two or more service providers is called as a) Cloud Federation b) Intra Cloud c) Cloud Provisioning d) Cloud Connecting

Last Answer : Conceptual Level

To avoid damaging the components of a printed circuit board when testing it with a DC volt-ohmmeter, you should _______. A. ground the board B. avoid reversing the polarity of the leads C. isolate sensitive components with heat sinks D. all of the above

Description : To avoid damaging the components of a printed circuit board when testing it with a DC volt-ohmmeter, you should _______. A. ground the board B. avoid reversing the polarity of the leads C. isolate sensitive components with heat sinks D. all of the above

Last Answer : Answer: B

Why is it a poor practice to use a high wattage soldering iron when soldering or desoldering components on a printed circuit board? A. The circuit board will blister and warp. B. The foil wire bonded to the board may come loosened from the board. C. The circuit board has a low melting temperature. D. The solder is kept to a dull heat dissipating finish.

Description : Why is it a poor practice to use a high wattage soldering iron when soldering or desoldering components on a printed circuit board? A. The circuit board will blister and warp. B. The foil wire bonded ... board has a low melting temperature. D. The solder is kept to a dull heat dissipating finish.

Last Answer : Answer: B

Tightly knit metal braid wire can be used with a printed circuit board when ___________. A. conductor flexibility is required B. desoldering components in the circuit C. electrically produced magnetic fluxes would cause inaccuracies in adjacent components D. reactance in the circuit must be kept to a minimum

Description : Tightly knit metal braid wire can be used with a printed circuit board when ___________. A. conductor flexibility is required B. desoldering components in the circuit C. electrically produced magnetic ... cause inaccuracies in adjacent components D. reactance in the circuit must be kept to a minimum

Last Answer : Answer: B

What methods are used to deposit thin-film components on a substrate?

Description : What methods are used to deposit thin-film components on a substrate?

Last Answer : . Evaporation and cathode sputtering.

What combination of materials is used to patch or build up damaged areas of boards?

Description : What combination of materials is used to patch or build up damaged areas of boards?

Last Answer : Epoxy and fiberglass powder.

What is the preferred method of repairing cracked runs on boards?

Description : What is the preferred method of repairing cracked runs on boards?

Last Answer : Clinched staple.

In what direction are component leads clinched on single and double-sided boards?

Description : In what direction are component leads clinched on single and double-sided boards?

Last Answer : In the direction of the run.

Gram negative organisms are largely insensitive to benzyl penicillin because: A. They produce large quantities of penicillinase B. They do not utilise D-alanine whose incorporation in the cell wall is inhibited by benzylpenicillin C. Benzyl penicillin is not able to penetrate deeper into the lipoprotein-peptidoglycan multilayer cell wall of gram negative bacteria D. Both ‘A’ and ‘B’ are correct

Description : Gram negative organisms are largely insensitive to benzyl penicillin because: A. They produce large quantities of penicillinase B. They do not utilise D-alanine whose incorporation in the cell wall is inhibited ... multilayer cell wall of gram negative bacteria D. Both A' and B' are correct

Last Answer : . Benzyl penicillin is not able to penetrate deeper into the lipoprotein-peptidoglycan multilayer cell wall of gram negative bacteria

What is multilayer feed forward neural networks?

Description : What is multilayer feed forward neural networks?

Last Answer : It consists of many hidden units. Each hidden unit act as a perceptron that represents a soft threshold functions in the input space. Output unit act as a soft threshold linear combination of several such functions.

Which of the following neural networks uses supervised learning? (A) Multilayer perceptron (B) Self organizing feature map (C) Hopfield network (1) (A) only (2) (B) only (3) (A) and (B) only (4) (A) and (C) only

Description : Which of the following neural networks uses supervised learning? (A) Multilayer perceptron (B) Self organizing feature map (C) Hopfield network (1) (A) only (2) (B) only (3) (A) and (B) only (4) (A) and (C) only

Last Answer : (1) (A) only

Describe any three methods by which printed books became more accessible to common people. -SST 10th

Description : Describe any three methods by which printed books became more accessible to common people. -SST 10th

Last Answer : Three methods by which printed books became more accessible to common people: (i) Very cheap books were brought in Madras town and sold on the cross roads, allowing poor people travelling to markets to ... e.g., in Bombay. (iii) Libraries were located mostly in cities and in prosperous villages.

There is a relationship between total current and current through the individual components in a circuit. What is this relationship in a series circuit and a parallel circuit?

Description : There is a relationship between total current and current through the individual components in a circuit. What is this relationship in a series circuit and a parallel circuit?

Last Answer : The source voltage would have to be increased to 640 volts

When you are testing individual components in a circuit, what may cause a defective component to appear good?

Description : When you are testing individual components in a circuit, what may cause a defective component to appear good?

Last Answer : A parallel resistor or diode of similar value.

What are the five main components of a circuit breaker?

Description : What are the five main components of a circuit breaker?

Last Answer : Frame, operating mechanism, arc extinguishers, terminal connectors, and trip element.

Black substance on circuit boards?

Description : Black substance on circuit boards?

Last Answer : We coat all our circuits with a conformal coating to protect the leads and contacts to protect them from environmental issues. At the speeds the circuits are running, any two neighboring leads act as ... The added step costs money but it is well worth it for the manufacturer and the customer.

Personal computers used a number of chips mounted on a main circuit board. What is the common name for such boards? A) Daughterboard B) Motherboard C) Father board D) Childboard

Description : Personal computers used a number of chips mounted on a main circuit board. What is the common name for such boards? A) Daughterboard B) Motherboard C) Father board D) Childboard

Last Answer : Answer : B

Personal computers use a number of chips mounted on a main circuit board. What is the common name for such boards? a. Daughter board b. Motherboard c. Father board d. Breadboard

Description : Personal computers use a number of chips mounted on a main circuit board. What is the common name for such boards? a. Daughter board b. Motherboard c. Father board d. Breadboard

Last Answer : Motherboard

Personal computers use a number of chips mounted on a main circuit board. What is the common name for such boards? a. Daughter board b. Motherboard c. Father board d. Breadboard

Description : Personal computers use a number of chips mounted on a main circuit board. What is the common name for such boards? a. Daughter board b. Motherboard c. Father board d. Breadboard

Last Answer : d. Breadboard

Personal computers use a number of chips mounted on a main circuit board. What is the common name for such boards? a. Daughter board b. Motherboard c. Father board d. Breadboard

Description : Personal computers use a number of chips mounted on a main circuit board. What is the common name for such boards? a. Daughter board b. Motherboard c. Father board d. Breadboard

Last Answer : b. Motherboard

The first widely used commercial form of Artificial Intelligence (Al) is being used in many popular products like microwave ovens, automobiles and plug in circuit boards for desktop PCs. What is name of AI? A. Boolean logic B. Human logic C. Fuzzy logic D. Functional logic

Description : The first widely used commercial form of Artificial Intelligence (Al) is being used in many popular products like microwave ovens, automobiles and plug in circuit boards for desktop PCs. What is name of AI? A. Boolean logic B. Human logic C. Fuzzy logic D. Functional logic

Last Answer : C. Fuzzy logic 

What the three basic components make up the typical magnetic amplifier?

Description : What the three basic components make up the typical magnetic amplifier?

Last Answer : Two saturable reactors and a transformer.

What three components determine the address that locates where on a floppy disk the computer will store the data?

Description : What three components determine the address that locates where on a floppy disk the computer will store the data?

Last Answer : a. disk side number, b. track number, and c. sector number.

Energy can be inserted or removed from a cavity by what three methods?

Description : Energy can be inserted or removed from a cavity by what three methods?

Last Answer : Probes, loops, and slots.

What three methods are used to remove protective material?

Description : What three methods are used to remove protective material?

Last Answer : Chemical, mechanical, and thermal.

What are the three most common methods of interconnections?

Description : What are the three most common methods of interconnections?

Last Answer : Conventional printed circuit boards, multilayer printed circuit boards and modular assemblies.

What are the three most popular methods for encoding digital data onto magnetic disks?

Description : What are the three most popular methods for encoding digital data onto magnetic disks?

Last Answer : a. Frequency modulation (FM). b. Modified frequency modulation (MFM). c. Run length limited (RLL).

What are three methods for determining if a fuse is open?

Description : What are three methods for determining if a fuse is open?

Last Answer : Visual inspection, indicators, and using a meter

What are the two methods of connecting the outputs from a three-phase alternator to the load?

Description : What are the two methods of connecting the outputs from a three-phase alternator to the load?

Last Answer : Wye and Delta.

Pick up the correct statement from the following: (A) Plastics have generally low melting point (B) The coefficient of thermal expansion of plastics is about three times than that of steel (C) The acoustical boards prepared by impregnating fibre-glass with phenolic resins has absorption coefficient of about 0.67 (D) All the above

Description : Pick up the correct statement from the following: (A) Plastics have generally low melting point (B) The coefficient of thermal expansion of plastics is about three times than that of steel (C) ... fibre-glass with phenolic resins has absorption coefficient of about 0.67 (D) All the above

Last Answer : Answer: Option D

What is the main printed circuit board of a computer called ?

Last Answer : The main printed circuit board of a computer is called mother board.

When troubleshooting a console circuit card suspected of being faulty, first check operating voltages, clean the card and then _________________. A. make sure wired connections and push-on connectors are tight B. test each resistor and capacitor on the card with an ohmmeter C. check the continuity of all printed circuit traces with an ohmmeter D. measure the gain of each transistor or integrated circuit

Description : When troubleshooting a console circuit card suspected of being faulty, first check operating voltages, clean the card and then _________________. A. make sure wired connections and push-on connectors ... circuit traces with an ohmmeter D. measure the gain of each transistor or integrated circuit

Last Answer : Answer: A

What type of service is NOT provided by the circuit shown in the illustration? EL-0094 A. Logging of engine order signals from the bridge. B. Printed record of alarms as they occur. C. Visual metering of temperature and pressure conditions. D. Periodic recording of pressure and temperature conditions.

Description : What type of service is NOT provided by the circuit shown in the illustration? EL-0094 A. Logging of engine order signals from the bridge. B. Printed record of alarms as they ... . Visual metering of temperature and pressure conditions. D. Periodic recording of pressure and temperature conditions.

Last Answer : Answer: A

When soldering a printed circuit board component, you should be careful to prevent damage by _________. A. quickly heating the joints, using a high wattage iron B. using the soldering iron tip sparingly C. using only acid cord solder D. applying mechanical pressure to the joints being soldered

Description : When soldering a printed circuit board component, you should be careful to prevent damage by _________. A. quickly heating the joints, using a high wattage iron B. using the soldering iron tip sparingly C. using only acid cord solder D. applying mechanical pressure to the joints being soldered

Last Answer : Answer: B

In electronic circuits, DC voltages can be positive (+) or negative (-) when measured with respect to the _________. A. printed circuit board 'common' trace B. chassis, console frame or hull 'ground' C. analogue or digital circuitry 'common' bus D. all of the above

Description : In electronic circuits, DC voltages can be positive (+) or negative (-) when measured with respect to the _________. A. printed circuit board 'common' trace B. chassis, console frame or hull 'ground' C. analogue or digital circuitry 'common' bus D. all of the above

Last Answer : Answer: D

In electronic circuitry, the abbreviation 'PCB' commonly means ______________. A. pulse coded binary B. printed circuit board C. poly-coated braid D. personal computer bits

Description : In electronic circuitry, the abbreviation 'PCB' commonly means ______________. A. pulse coded binary B. printed circuit board C. poly-coated braid D. personal computer bits

Last Answer : Answer: B

PCB stands for: a) Process Control Block b) Printed Circuit Board c) Both of The Above d) None of The Above

Description : PCB stands for: a) Process Control Block b) Printed Circuit Board c) Both of The Above d) None of The Above

Last Answer : c) Both of The Above

A soldering gun should NOT be used on what components?

Description : A soldering gun should NOT be used on what components?

Last Answer : Electronic components, such as resistors, capacitors, and transistors.

In an astable multivibrator, which components determine the pulse repetition frequency?

Description : In an astable multivibrator, which components determine the pulse repetition frequency?

Last Answer : RC coupling networks.

. What components form the load for Q1?

Description : . What components form the load for Q1?

Last Answer : C5 and the primary of T2.

What components form the input-signal-developing impedance for the amplifier?

Description : What components form the input-signal-developing impedance for the amplifier?

Last Answer : C2 and the secondary of T1.

What is the arrangement of both series and shunt components called?

Description : What is the arrangement of both series and shunt components called?

Last Answer : Combination peaking.

What determines whether these components are considered series or shunt?

Description : What determines whether these components are considered series or shunt?

Last Answer : . The relationship of the components to the output-signal path.