During the manufacture of a point-contact diode, what is  the purpose of passing a relatively large current from the  catwhisker to the silicon crystal?

1 Answer

Answer :

. To form a small region of p-type material

Related questions

Description : What is the capacitive reactance across a point-contact diode as compared to a normal junction diode?

Last Answer : Lower.

Description : A silicon controlled rectifier (SCR) is a solid state device used to change ________________. A. DC to AC and control relatively low load current B. AC to DC and control relatively high load ... to AC and control relatively high load current D. AC to DC and control relatively low load current

Last Answer : Answer: B

Description : Multimode step-index fibers have relatively large core diameters and large numerical apertures. These provide what benefit?

Last Answer : Make it easier to couple light from a light-emitting diode (LED) into the fiber.

Description : During avalanche effect breakdown, what limits current flow through the diode?

Last Answer : an external current-limiting resistor

Description : What is the purpose of a PN junction diode?

Last Answer : To convert alternating current into direct current

Description : What is the purpose of the circulator in a tunnel-diode amplifier?

Last Answer : Prevent feedback to the tuned input circuit.

Description : The pin diode is primarily used for what purpose?

Last Answer : A switching device.

Description : A large negative voltage is applied to the plate of a diode, and a largewhat tube parameter has been exceeded?

Last Answer : Peak Inverse Voltage (PIV).

Description : Silicon crystal can be converted to p-type semi-conductor by doping with (A) Phosphorous (B) Nitrogen (C) Carbon (D) Boron

Last Answer : Option D

Last Answer : At room temperature, an intrinsic silicon crystal acts approximately as An insulator.

Description : In the tunnel diode, the tunneling current is at what level when the forbidden gap of the N-type material is at the same energy level as the empty states of the P-type material?

Last Answer : Minimum.

Description : How does the current-diode detector differ from the voltage-diode detector?

Last Answer : The current-diode detector is in parallel with the input and load.

Description : What term is used to describe the frequency at which the filter circuit changes from the point of rejecting the unwanted frequencies to the point of passing the desired frequencies?

Last Answer : Frequency cutoff (fco).

Last Answer : Here you will find everything: http://popular.fbmi.cvut.cz/elektrotechnika/Stranky/Polovodi%C4%8Dov%C3%A9%20diody%20-%20%C3%BAvod,%20VA%20charakteristika.aspx

Description : Tunnel diode is a: a) Power diode b) Has light doping c) Has heavy doping d) Is a reverse recovery diode Ans: C 76.LEDs are fabricated from: a) Silicon b) Germanium c) Si or Ge d) Gallium arsenide

Last Answer : Ans: D

Description : Figure 'C' shown in the illustration represents a _________. EL-0078 A. silicon controlled rectifier B. light emitting diode C. photosensitive diode D. Zener diode

Last Answer : Answer: C

Description : Figure 'D' shown in the illustration represents a _________. EL-0067 A. silicon controlled rectifier B. light emitting diode C. photosensitive diode D. Zener diode

Last Answer : Answer: B

Description : Which of the following statements represents an application of a silicon controlled rectifier? A. To provide DC power for a main propulsion motor. B. For use as a voltage reference diode. C. For sensing flame in an automated burner. D. To eliminate power supply hum.

Last Answer : Answer: A

Description :  ‘Germanium diode knee voltage is lower than silicon diode knee voltage.' Justify.

Last Answer : Justification: The band gap between conduction and valence band for Germanium (0.66eV) is less as compared to Silicon (1.11eV).Hence less energy is required to start conduction in Germanium diode. 

Description : The cut-in voltage of a silicon diode is approx. • 0.7 volt • 0.3 volt • 1.4 volt • None of the above.

Last Answer : The cut-in voltage of a silicon diode is approx. 0.7 volt

Description : With a 12 V supply, a silicon diode, and a 370 - ohm resistor in series, what voltage will be dropped across the diode? a) 0.3V b) 0.7V c) 0.9V d) 1.4V

Last Answer : 0.7V

Description : The element used in the manufacture of safety matches is – (1) Phosphorous (2) Magnesium (3) Silicon (4) Sulphur

Last Answer : (1) Phosphorous Explanation: One end of a match is coated with a material that can be ignited by frictional heat generated by striking the match against a suitable surface. The coated end ... ," contains either phosphorus or phosphorus sesquisulfide as the active ingredient and gelatin as a binder.

Description : __________ steel is widely used for the manufacture of motor car crankshafts. (A) Silicon (B) Nickel (C) Chrome (D) High speed

Last Answer : (C) Chrome

Description : The ALU and control unit of most of the microcomputers are combined and manufacture on a single silicon chip. What is it called? a. monochip b. microprocessor c. ALU d. control unit

Last Answer : b. microprocessor

Description : The element used in the manufacture of safety matches is (1) Phosphorous (2) Magnesium (3) Silicon (4) Sulphur

Last Answer : Phosphorous

Description : What is the name given to a doped germanium crystal with an excess of free holes?

Last Answer : P-type crystal.

Description : What is the impedance of a crystal at its resonant frequency when it is used in the series mode?

Last Answer : Minimum.

Description : What is the impedance of a crystal at its resonant frequency when it is used in the parallel mode?

Last Answer : Maximum

Description : What is the function of a crystal filter in a receiver?

Last Answer : It is used to achieve maximum selectivity.

Description : What does the liquid crystal display require for computer applications?

Last Answer : An external light source, called a backlight.

Description : What property of a crystalline material is used in a crystal microphone?

Last Answer : The piezoelectric effect.

Description : Do you make eye contact while passing people when walking around or out during the day?

Last Answer : Well..I wouldn't say I make sustained eye contact but I'm an outgoing, extroverted and highly humorous type. I talk to strangers all the time, say Hello or Hi or Beautiful day , crack ... talk easily. I like to play with people but I don't stare at them intensely without saying anything. lol

Description : What are the three relatively common classifications of servo systems by function?

Last Answer : Classifications in accordance with position, velocity, and acceleration functions.

Description : Which layer of the atmosphere has relatively little effect on radio waves?

Last Answer : Stratosphere.

Description : Why do 2D air-search radars use relatively low carrier frequencies and low pulse-repetition rates?

Last Answer : Increased maximum range.

Description : What term describes a material whose resistance remains relatively constant with changes in temperature?

Last Answer : Zero temperature coefficient.

Description : What happens to the permeability of an iron core as the current increases from the operating point to a large value?

Last Answer : Permeability decreases

Description : For a heterogeneous catalytic reaction (A) Free energy of activation is lowered in the presence of catalyst, which remains unchanged at the end of reaction (B) A relatively small amount of catalyst ... with the reactant (D) The surface of the catalyst does not play an important role during reaction

Last Answer : (A) Free energy of activation is lowered in the presence of catalyst, which remains unchanged at the end of reaction

Description : What is the name for a distinctive fossil that existe over a relatively large part of the earth during a short time of earth history?

Last Answer : ANSWER: INDEX FOSSIL

Description : Most large alternators have a small dc generator built into them. What is its purpose?

Last Answer : To provide dc current for the rotating field.

Description : On increasing the reverse bias to a large value in a p-n junction diode current (a) Increases slowly (b) Remains fixed (c) Suddenly increases (d) Decreases slowly

Last Answer : (c) Suddenly increases

Description : What is the relative length of the time constant for the diode capacitor combination in a damper (long or short)?

Last Answer : Short time constant.

Description : What is the condition of the diode in a series limiter when an output is developed? In a parallel limiter?

Last Answer : Conducting, cutoff.

Description : Why is electron flow with the arrow in the symbol of a Zener diode instead of against the arrow as it is in a normal diode?

Last Answer : Because Zener diodes are operated in the reverse bias mode.

Description : What is the doping level of an avalanche effect diode when compared to the doping level of a Zener-effect diode?

Last Answer : The doping level of an avalanche effect diode is lower.

Description : What is the name of the simplest type of rectifier which uses one diode?

Last Answer : The half-wave rectifier.

Description : When checking a diode with an ohmmeter, what is indicated by two high resistance measurements?

Last Answer : The diode is open or has a high-forward resistance.

Description : What is the greatest threat to a diode?

Last Answer : Heat.

Description : What type of diode has orange, blue, and gray bands?

Last Answer : 1N368.

Description : What is meant by diode ratings?

Last Answer : They are the limiting values of operating conditions outside which operations could cause diode damage.