Beta cut-off frequency of a transistor is the frequency at which the Beta is

Beta cut-off frequency of a transistor is the frequency at which the Beta is

• 0.707 of low frequency value

• Zero

• Equal to low frequency value

• None of the above.
by

1 Answer

Answer :

Beta cut-off frequency of a transistor is the frequency at which the Beta is 0.707 of low frequency value

by

Related questions

In a transistor Colpitts oscillator, C1 = 0.001 µF, C2 = 0.01 µF and L = 5 µH. The frequency of oscillation in

Description : In a transistor Colpitts oscillator, C1 = 0.001 µF, C2 = 0.01 µF and L = 5 µH. The frequency of oscillation in MHz will be (a) 2.37 MHz (b) 10.00 MHz (c) 11.54 MHz (d) 9.09 MHz 

Last Answer : c

The values of L and C for a low pass filter with cut off frequency of 2.5 KHz and operating with a terminated

Description : The values of L and C for a low pass filter with cut off frequency of 2.5 KHz and operating with a terminated load resistance of 450 Ohm are given by  (a) 57.3 mH; 0.283 μF (b) 28.66 μH; 0.14 μF (c) 114.64 mH; 0.566 mF (d) 50.23 mH; 0.632 mF

Last Answer : The values of L and C for a low pass filter with cut off frequency of 2.5 KHz and operating with a terminated load resistance of 450 Ohm are given by 57.3 mH; 0.283 μF

Low pass filter with cut off frequency of 100 kHz and high pass filter with cut off frequency of

Description : Low pass filter with cut off frequency of 100 kHz and high pass filter with cut off frequency of 50 kHz are connected in tandem, the resultant filter is Low pass filter with cut off frequency of 100 kHz ... kHz Band pass filter with pass band from 50 kHz to 100 kHz. None of the above.

Last Answer : Low pass filter with cut off frequency of 100 kHz and high pass filter with cut off frequency of 50 kHz are connected in tandem, the resultant filter is Band pass filter with pass band from 50 kHz to 100 kHz.

A 4 GHz carrier is amplitude modulated by a low-pass signal of maximum cut off frequency 1 MHz

Description : A 4 GHz carrier is amplitude modulated by a low-pass signal of maximum cut off frequency 1 MHz. lf this signal is to be ideally sampled, the minimum sampling frequency should be nearly

Last Answer : A 4 GHz carrier is amplitude modulated by a low-pass signal of maximum cut off frequency 1 MHz. lf this signal is to be ideally sampled, the minimum sampling frequency should be nearly 4 Ghz

When a transistor is cut off or saturated, transitory ______have almost no effect: a) wave b) variations c) stage d) None of The Above

Description : When a transistor is cut off or saturated, transitory ______have almost no effect: a) wave b) variations c) stage d) None of The Above

Last Answer : b) variations

A bipolar junction transistor (BJT) is used as a power control switch by biasing it in the cut-off region

Description : A bipolar junction transistor (BJT) is used as a power control switch by biasing it in the cut-off region (OFF state) or in the saturation region (ON state). In the ON state, for ... base-collector junction is reverse biased (D) both the base-emitter and base-collector junctions are forward biased

Last Answer : A BJT is as a power control switch by biasing it in cut-off region (OFF state) or in the saturation region (ON state). In  ON state, for BJT both the base-emitter and base- collector junctions are forward biased

In alpha-beta pruning, ............... is used to cut off the search at maximizing level only and ................. is used to cut off the search at minimizing level only. (A) alpha, beta (B) beta, alpha (C) alpha, alpha (D) beta, beta

Description : In alpha-beta pruning, ............... is used to cut off the search at maximizing level only and ................. is used to cut off the search at minimizing level only. (A) alpha, beta (B) beta, alpha (C) alpha, alpha (D) beta, beta

Last Answer : (B) beta, alpha

In the common–emitter transistor circuit, if the current gain is 100 and the collector current is 10 mA, the

Description : In the common–emitter transistor circuit, if the current gain is 100 and the collector current is 10 mA, the base current is: (1) 10 µA (2) 100 µA (3) 1 A (4) 10 A 

Last Answer : In the common–emitter transistor circuit, if the current gain is 100 and the collector current is 10 mA, the base current is: 100 µA

The set of transistor characteristics which enable α to be determined directly from the slope is

Description : The set of transistor characteristics which enable α to be determined directly from the slope is (a) CB transfer characteristics (b) CE transfer characteristics (c) CB input characteristics (d) CE output characteristics

Last Answer : The common base transfer characteristics

A transistor has a typical value of β = 200 , If the collector current is 15 mA, then base current will be

Description : A transistor has a typical value of β = 200 , If the collector current is 15 mA, then base current will be

Last Answer : A transistor has a typical value of β = 200 , If the collector current is 15 mA, then base current will be 0.075 mA

If a transistor were operated with emitter and collector interchanged, then

Description : If a transistor were operated with emitter and collector interchanged, then  1 .emitter current will increase  2. Collector current will increase  3. Base current will decrease  4. No current flow will take place 

Last Answer : If a transistor were operated with emitter and collector interchanged, then Collector current will increase 

In a transistor

Description : In a transistor  1. Emitter is heavily doped while the collector is moderately doped 2. Collector base junction is forward biased 3. Emitter is made wider than collector 4. The input resistance is much higher than output resistance 

Last Answer : In a transistor Emitter is heavily doped while the collector is moderately doped

In an npn transistor, _____ are the minority carriers.

Description : In an npn transistor, _____ are the minority carriers.   (a) Free electrons (b) Acceptor ions (c) Donor ions (d) Holes

Last Answer : In an npn transistor, Holes are the minority carriers.

A transistor has ________ number of terminals.

Description : A transistor has ________ number of terminals. (A) 2 (B) 3 (C) 1 (D) 4 

Last Answer : A transistor has 3 number of terminals. 

ICB0 in a transistor can be reduced by reducing:

Description : ICB0 in a transistor can be reduced by reducing:  (1) IB (2) VCC (3) IE (4) Temperature

Last Answer : ICB0 in a transistor can be reduced by reducing: Temperature.

A Transistor has - - - PN junctions

Last Answer : A Transistor has Two PN junctions

The most commonly used transistor circuit arrangement - - -

Last Answer :  The most commonly used transistor circuit arrangement Common emitter

The function of Transistor is to do - - -

Last Answer : The function of Transistor is to do Amplification

A FET is a - - - transistor

Last Answer : A FET is a Bi-polar transistor

The encapsulation of transistor is necessary for

Last Answer : The encapsulation of transistor is necessary for mechanical ruggedness.

In a transistor leakage current mainly depends on

Last Answer : In a transistor leakage current mainly depends on temperature.

When a transistor is connected in common emitter mode, it with have

Last Answer : When a transistor is connected in common emitter mode, it with have medium input resistance and high output resistance.

What is the main use of a transistor?

Description : What is the main use of a transistor?

Last Answer : Main use of a transistor as amplifier and as switch.

can transistor amplify dc?

Description : can transistor amplify dc?

Last Answer : No

Beta in grounded emitter circuit is very high due to

Last Answer : Beta in grounded emitter circuit is very high due to base current in small compared to collector current.

bjt what is beta ?

Last Answer : Beta is the current gain which is the ratio of collector current to base current.

In a 741 Op-Amp, there is 20 dB/decade fall-off starting at a relatively low frequency. This is due to the

Description : In a 741 Op-Amp, there is 20 dB/decade fall-off starting at a relatively low frequency. This is due to the (A) applied load (B) internal compensation (C) impedance of the source (D) power dissipation in the chip

Last Answer : In a 741 Op-Amp, there is 20 dB/decade fall-off starting at a relatively low frequency. This is due to the internal compensation

What are the factors that limit the frequency response of a transistor amplifier?

Description : What are the factors that limit the frequency response of a transistor amplifier?

Last Answer : The capacitance and inductance of the circuit and the interelectrode capacitance of the transistor.

When you are testing the gain of an audio-frequency transistor with an ohmmeter, what is indicated by a 10-to-1 resistance ratio?

Description : When you are testing the gain of an audio-frequency transistor with an ohmmeter, what is indicated by a 10-to-1 resistance ratio?

Last Answer : Normal gain.

Choose which of following condition is not required for a waveguide to exist. a) The dimensions should be in accordance with desired frequency b) Cut-off frequency should be minimum 6GHz c) The shape should be spherical d) No specific condition is required for waveguide design

Description : Choose which of following condition is not required for a waveguide to exist. a) The dimensions should be in accordance with desired frequency b) Cut-off frequency should be minimum 6GHz c) The shape should be spherical d) No specific condition is required for waveguide design

Last Answer : c) The shape should be spherical

Rectangular waveguides dominate the circular waveguides. Find the reason. a) Low cut-off frequency b) Easy to design c) More wave propagation d) The statement is false

Description : Rectangular waveguides dominate the circular waveguides. Find the reason. a) Low cut-off frequency b) Easy to design c) More wave propagation d) The statement is false

Last Answer : b) Easy to design

Define the term w.r.t. waveguide: (i) Cut-OFF frequency (ii) Group Velocity

Description : Define the term w.r.t. waveguide: (i) Cut-OFF frequency (ii) Group Velocity

Last Answer : Group velocity: It is defined as the rate at which the wave propagates through the waveguide and is given by The group velocity is also can be defined as the velocity of energy flow ... rectangular waveguide at a frequency below fc TE1,0. This is absolute cut off frequency of the waveguide.

A rectangular waveguide is 5.1 cm by 2.4 cm (inside dimension). The cut off frequency of the dominant mode is

Description : A rectangular waveguide is 5.1 cm by 2.4 cm (inside dimension). The cut off frequency of the dominant mode is

Last Answer : A rectangular waveguide is 5.1 cm by 2.4 cm (inside dimension). The cut off frequency of the dominant mode is 2.94 GHz

A low-pass filter with a cut-off frequency of 30 Hz is cascaded with a high pass filter with a cut-off frequency

Description : A low-pass filter with a cut-off frequency of 30 Hz is cascaded with a high pass filter with a cut-off frequency of 20 Hz. The resultant system of filters will function as  (A) an all – pass filter (B) an all – stop filter (C) an band stop (band-reject) filter (D) a band – pass filter

Last Answer : A low-pass filter with a cut-off frequency of 30 Hz is cascaded with a high pass filter with a cut-off frequency of 20 Hz. The resultant system of filters will function as  a band – pass filter

A rectangular waveguide is 4.2 cm by 1.85 cm. The cut-off frequency of the dominant mode through this

Description : A rectangular waveguide is 4.2 cm by 1.85 cm. The cut-off frequency of the dominant mode through this waveguide is  (a) 3.57 GHz (b) 3.75 GHz (c) 3.70 MHz (d) 3.57 MHz

Last Answer : A rectangular waveguide is 4.2 cm by 1.85 cm. The cut-off frequency of the dominant mode through this waveguide is  3.57 GHz 

If it's true that Beta fish are fighting fish and can't put them into same tank because they will kill each other. Then how come they don't kill each other all off in the wild and become extinct?

Description : If it's true that Beta fish are fighting fish and can't put them into same tank because they will kill each other. Then how come they don't kill each other all off in the wild and become extinct?

Last Answer : Yes it's true. Though they don't actually fight (expect for maybe a little biting), they psych each other out till one dies. They are territorial. If a beta goes into another area they'll fight . ... the pond is gonna fishes whole territory but a little tank isn't going to be enough space for two.

What is the frequency range of VHF electromagnetic waves?

Description : What is the frequency range of VHF electromagnetic waves? A) 30-300 kHz B) 30-3000 kHz C) 30-300 MHz D) 30-3000 MHz

Last Answer : What is the frequency range of VHF electromagnetic waves? A) 30-300 kHz B) 30-3000 kHz C) 30-300 MHz D) 30-3000 MHz

In a full wave rectifier with input frequency of 50 Hz, the frequency of the output is:

Description : In a full wave rectifier with input frequency of 50 Hz, the frequency of the output is: (1) 50 Hz (2) 100 Hz (3) 150 Hz (4) 200 Hz

Last Answer : In a full wave rectifier with input frequency of 50 Hz, the frequency of the output is: 100 Hz

Frequency shift keying is used mostly in:

Description : Frequency shift keying is used mostly in: (1) Telegraphy (2) Telephony (3) Satellite communication (4) Radio transmission 

Last Answer : Frequency shift keying is used mostly in: Telegraphy 

Two sinusoidal signals having the same amplitude and frequency are applied to the X and Y inputs of a CRO.

Description : Two sinusoidal signals having the same amplitude and frequency are applied to the X and Y inputs of a CRO. The observed Lissajous figure is straight line. The phase shift between the two signals would be (1) Zero (2) 90 degrees (3) Either zero or 180 degrees (4) Either 90 degrees or 270 degrees  

Last Answer : Two sinusoidal signals having the same amplitude and frequency are applied to the X and Y inputs of a CRO. The observed Lissajous figure is straight line. The phase shift between the two signals would be (1) Zero (2) 90 degrees (3) Either zero or 180 degrees (4) Either 90 degrees or 270 degrees  

An FM signal with modulation index mƒ is passed through a frequency tripler. The modulation index of the

Description : An FM signal with modulation index mƒ is passed through a frequency tripler. The modulation index of the output signal will be (1) mƒ (2) 3mƒ (3) 9mƒ (4) 27mƒ

Last Answer : An FM signal with modulation index mƒ is passed through a frequency tripler. The modulation index of the output signal will be 3mƒ

Each flip-flop in a 4-bit ripple counter introduces a maximum delay of 40 n sec. The maximum clock frequency

Description : Each flip-flop in a 4-bit ripple counter introduces a maximum delay of 40 n sec. The maximum clock frequency is (a) 2.65 MHz (b) 6.25 MHz (c) 5.26 MHz (d) 6.52 MHz 

Last Answer : Each flip-flop in a 4-bit ripple counter introduces a maximum delay of 40 ns. The maximum clock frequency is 6.25MHz. nff  * Tdelay = 4*40 =160ns so, max. frequency = 1/ (200*10-9 ) = 6.25MHz          

Which of the following oscillators is used for generation of high frequency signal ?

Description : Which of the following oscillators is used for generation of high frequency signal ? (a) RC phase shift oscillator (b) Blocking oscillator (c) Wein bridge oscillator (d) L-C oscillator 

Last Answer : LC oscillator is used for generation of high frequency signal. 

The frequency stability of the oscillator output is maximum in _____.

Description : The frequency stability of the oscillator output is maximum in _____.   (a) Crystal oscillator (b) Phase shift oscillator (c) LC oscillator (d) Wien bridge oscillator 

Last Answer : The frequency stability of the oscillator output is maximum in Crystal oscillator. 

The frequency of carrier in the carrier current pilot scheme is :

Description : The frequency of carrier in the carrier current pilot scheme is : (A) 1 kHz to 10 kHz (B) 25 kHz to 50 kHz (C) 10 kHz to 25 kHz (D) 50 kHz to 500 kHz

Last Answer : The frequency of carrier in the carrier current pilot scheme is : 50 kHz to 500 kHz

For FM signal, the frequency deviation

Description : For FM signal, the frequency deviation

Last Answer : For FM signal, the frequency deviation Independent of the modulation frequency

An accelerometer has input range of 0 to 10g, natural frequency 30 Hz and mass 0.001 kg. The range of the

Description : An accelerometer has input range of 0 to 10g, natural frequency 30 Hz and mass 0.001 kg. The range of the secondary displacement transducer in mm required to cover the input range is (A) 0 to 2.76 (B) 0 to 9.81 (C) 0 to 11.20 (D) 0 to 52.10

Last Answer : An accelerometer has input range of 0 to 10g, natural frequency 30 Hz and mass 0.001 kg. The range of the secondary displacement transducer in mm required to cover the input range is 0 to 2.76

Feedback factor at the frequency of oscillation of a Wien bridge oscillator is:

Description : Feedback factor at the frequency of oscillation of a Wien bridge oscillator is:  (1) 3 (2) 1/3 (3) 1/29 (4) 3/29

Last Answer : Feedback factor at the frequency of oscillation of a Wien bridge oscillator is: 1/3.

A series RLC circuit has a resonant frequency of 1 KHz and a quality factor Q = 100. If each of the R,L and C...

Description : A series RLC circuit has a resonant frequency of 1 KHz and a quality factor Q = 100. If each of the R,L and C is doubled from its original value, the new Q of the circuit is:  (1) 25 (2) 50 (3) 100 (4) 200

Last Answer : A series RLC circuit has a resonant frequency of 1 KHz and a quality factor Q = 100. If each of the R,L and C is doubled from its original value, the new Q of the circuit is: 200.

If Ф = angle(G(jw)H(jw)) where w is the gain crossover frequency of Bode plot of the system, phase margin is ...

Description : If Ф = angle(G(jw)H(jw)) where w is the gain crossover frequency of Bode plot of the system, phase margin is  A) -180+ Ф B) 180- Ф C) 180+ Ф D) -180- Ф

Last Answer : Ans:Option C