Specify the mechanism that SLDs lack that is required by laser diodes to achieve lasing.

Specify the mechanism that SLDs lack that is required by  laser diodes to achieve lasing.
by

1 Answer

Answer :

SLDs have no built-in optical feedback mechanism.
by

Related questions

Why are LEDs preferred over laser diodes for low- and moderate-frequency analog applications?

Description : Why are LEDs preferred over laser diodes for low- and moderate-frequency analog applications?

Last Answer : LEDs require less complex circuitry than lasers.

For laser diodes, the term ____________________ is used instead of bandwidth.

Description : For laser diodes, the term ____________________ is used instead of bandwidth.

Last Answer : linewidth

What type of logic family uses diodes in the input?

Description : What type of logic family uses diodes in the input?

Last Answer : DTL (diode transistor logic).

What resistance property is found in tunnel diodes but not in normal diodes?

Description : What resistance property is found in tunnel diodes but not in normal diodes?

Last Answer : Negative resistance.

What is the main difference in construction between normal PN junction diodes and tunnel diodes?

Description : What is the main difference in construction between normal PN junction diodes and tunnel diodes?

Last Answer : The amount of doping.

What causes the negative-resistance property of tunnel diodes?

Description : What causes the negative-resistance property of tunnel diodes?

Last Answer : The tunneling action

Which performance parameter is the minimum amount of optical power required to achieve a specific bit-error rate (BER) in digital systems or a given signal-to-noise ratio (SNR) in analog systems?

Description : Which performance parameter is the minimum amount of optical power required to achieve a specific bit-error rate (BER) in digital systems or a given signal-to-noise ratio (SNR) in analog systems?

Last Answer : Receiver sensitivity.

What are the 3 mechanism to achieve performance improvement?

Description : What are the 3 mechanism to achieve performance improvement?

Last Answer : i. Relevance feedback  ii. Document classification  iii. Document clustering

Mammalian cells are not inhibited by low concentrations of tetracyclines that inhibit sensitive microorganisms because: A. Host cells lack active transport mechanism for tetracyclines B. Host cells actively pump out tetracyclines C. Protein synthesizing apparatus of host cells has low affinity for tetracyclines D. Both ‘A’ and ‘C’ are correct

Description : Mammalian cells are not inhibited by low concentrations of tetracyclines that inhibit sensitive microorganisms because: A. Host cells lack active transport mechanism for tetracyclines B. Host cells actively pump out ... host cells has low affinity for tetracyclines D. Both A' and C' are correct

Last Answer : D. Both ‘A’ and ‘C’ are correct

Answer the following questions in 30 words: Name one important beverage crop and specify the geographical conditions required for its growth. -SST 10th

Description : Answer the following questions in 30 words: Name one important beverage crop and specify the geographical conditions required for its growth. -SST 10th

Last Answer : Tea is an important beverage crop. It is used almost all across the country. The geographical conditions for its growth are: - (a) There is good growth of tea plants in tropical and ... climate throughout the year. (d) The tender leaf growth is ensured by evenly distributed annual rainfall.

Name one important beverage crop and specify the geographical conditions required for its growth. -Geography

Description : Name one important beverage crop and specify the geographical conditions required for its growth. -Geography

Last Answer : Tea is also an important beverage crop introduced in India, along with coffee. The tea plant grows well in tropical and sub-tropical climates. It requires deep and fertile well-drained ... through the year. Frequent showers evenly distributed over the year ensure continuous growth of tender leaves.

In two degree of freedom system, the number of coordinates required to specify the motion of system are A. One B. Two C. Three D. Four

Description : In two degree of freedom system, the number of coordinates required to specify the motion of system are A. One B. Two C. Three D. Four

Last Answer : B. Two

Specify a Press Size required for sheet metal work.

Description : Specify a Press Size required for sheet metal work.

Last Answer : Specification of Press Size: Shut Height- The space available between the press bed or bolster and the slide or ram is called the shut height. It is always measured with the press shut or ... motion. Stroke length relates to speed ranges, the longer the stroke the slower the press speed range.

What characteristic(s) of radiated energy is (are) altered to achieve electronic scanning?

Description : What characteristic(s) of radiated energy is (are) altered to achieve electronic scanning?

Last Answer : Frequency or phase.

Do small core distortions formed by arc fusion's self alignment mechanism have more of an affect on light propagating through multimode or single mode fibers?

Description : Do small core distortions formed by arc fusion's self alignment mechanism have more of an affect on light propagating through multimode or single mode fibers?

Last Answer : Single mode fibers.

Capacitive tuning by inserting a ring into the cavity slot of a magnetron is accomplished by what type of tuning mechanism?

Description : Capacitive tuning by inserting a ring into the cavity slot of a magnetron is accomplished by what type of tuning mechanism?

Last Answer : . A cookie-cutter tuner

After using a tape that was stored in an area where temperatures exceeded 130º F you notice pieces of oxide sticking to the recorder's tape-transport mechanism, to its magnetic heads, and onto the tape. What is the probable cause of these symptoms?

Description : After using a tape that was stored in an area where temperatures exceeded 130º F you notice pieces of oxide sticking to the recorder's tape-transport mechanism, to its magnetic heads, and onto the tape. What is the probable cause of these symptoms?

Last Answer : Oxide shedding. At temperatures above 130º F, oxide coating becomes soft and sheds.

Which dispersion mechanism (material or waveguide) is a function of the size of the fiber's core relative to the wavelength of operation?

Description : Which dispersion mechanism (material or waveguide) is a function of the size of the fiber's core relative to the wavelength of operation?

Last Answer : Waveguide dispersion.

What is the main loss mechanism between the ultraviolet and infrared absorption regions?

Description : What is the main loss mechanism between the ultraviolet and infrared absorption regions?

Last Answer : Rayleigh scattering.

Describe the output of a laser diode.

Description : Describe the output of a laser diode.

Last Answer : The LD's output has a narrow spectral width and small output beam angle.

What is lowest current at which stimulated emission exceeds spontaneous emission in a semiconductor laser called?

Description : What is lowest current at which stimulated emission exceeds spontaneous emission in a semiconductor laser called?

Last Answer : Threshold current.

Why would a laser diode be used in a low-data-rate digital application?

Description : Why would a laser diode be used in a low-data-rate digital application?

Last Answer : When extremely high transmitter output powers are required.

Is the drive circuitry generally more complex for an LED or a laser diode? Why?

Description : Is the drive circuitry generally more complex for an LED or a laser diode? Why?

Last Answer : For a laser diode. The laser diode transmitter generally contains output power control circuitry and may contain a TE cooler and some circuitry associated with the TE cooler.

What is a laser?

Description : What is a laser?

Last Answer : A laser is a device that produces optical radiation using stimulated emission rather than spontaneous emission.

Beam-forming tubes and power tubes are similar except that power pentodes lack what element?

Description : Beam-forming tubes and power tubes are similar except that power pentodes lack what element?

Last Answer : Beam-forming plates.

Should I use diodes?

Description : Should I use diodes?

Last Answer : So you have three camera flashes that are attached to a single capacitor, or three camera flashes attached to different capacitors?

which of the following accurately describes junction diodes? -General Knowledge

Description : which of the following accurately describes junction diodes? -General Knowledge

Last Answer : A semiconductor rectifying device in which the barrier between the two regions of opposite conductivity (n-type and p-type) type produces the rectification: accurately describes junction diodes.

How many types of diodes ?

Description : How many types of diodes ?

Last Answer : 2 types of diodes

Are diodes polarity sensitive?

Description : Are diodes polarity sensitive?

Last Answer : Need answer

For which one of the following, 'Diodes' are generally used for? (1) Rectification (2) Amplification (3) Modulation (4) Filtration

Description : For which one of the following, 'Diodes' are generally used for? (1) Rectification (2) Amplification (3) Modulation (4) Filtration

Last Answer : (1) Rectification Explanation: In electronics, a diode is an electronic device that allows current to flow in one direction only. It is mainly used as a rectifier diode that lets ... used for power supply operation. Rectifier diodes are used for changing alternating current into direct current.

For which one of the following, "Diodes' are generally used for? (1) Rectification (2) Amplification (3) Modulation (4) Filtration

Description : For which one of the following, "Diodes' are generally used for? (1) Rectification (2) Amplification (3) Modulation (4) Filtration

Last Answer : (1) Rectification Explanation: A rectifier diode is a two-lead semiconductor that allows current to pass in only one direction. Many types of diodes are used for a wide range of applications. Rectifier diodes are a vital component in power supplies

Light Emitting Diodes (LED) is used in fancy electronic devices such as toys emit (1) X-rays (2) ultraviolet light (3) (4) All of the above (4) radio waves

Description : Light Emitting Diodes (LED) is used in fancy electronic devices such as toys emit (1) X-rays (2) ultraviolet light (3) (4) All of the above (4) radio waves

Last Answer : (4) All of the above Explanation: A light-emitting diode (LED) is a semiconductor light source that emits light when current flows through it. Infrared LEDs are used in remote-control circuits, such as those used with a wide variety of consumer electronics.

A NOT gate can be implemented by: (1) a single diode (2) two diodes (3) a single resistor (4) a single transistor

Description : A NOT gate can be implemented by: (1) a single diode (2) two diodes (3) a single resistor (4) a single transistor

Last Answer : (4) a single transistor Explanation: In digital logic, an inverter or NOT gate is a logic gate which implements logical negation. An inverter circuit outputs a voltage representing the opposite ... be constructed using a single NMOS transistor or a single PMOS transistor coupled with a resistor.

In the illustrated circuit, if the input to leads 'B' and 'Y' was 24 VDC the output between 'A' and 'X' will be _________. EL-0069 A. 24 VDC B. 22.8 VDC, 24 VDC minus the 1.2 VDC voltage drop across two diodes C. undeterminable without knowing the turns ratio of the transformer D. 0 VDC

Description : In the illustrated circuit, if the input to leads 'B' and 'Y' was 24 VDC the output between 'A' and 'X' will be _________. EL-0069 A. 24 VDC B. 22.8 VDC, 24 VDC minus the 1.2 VDC voltage drop across two diodes C. undeterminable without knowing the turns ratio of the transformer D. 0 VDC

Last Answer : Answer: D

Routine maintenance of a ship's service alternator should include ______________. A. changing the pedestal bearing insulation yearly B. megger testing of all rectifying diodes C. lubricating excitation slip rings D. periodic cleaning of the air filters or screens

Description : Routine maintenance of a ship's service alternator should include ______________. A. changing the pedestal bearing insulation yearly B. megger testing of all rectifying diodes C. lubricating excitation slip rings D. periodic cleaning of the air filters or screens

Last Answer : Answer: D

Which of the devices listed is indicated by the symbols lettered 'A' to 'F', shown in the illustration? EL-0016 A. Diodes B. Linear inductors C. Capacitors D. Transistors

Description : Which of the devices listed is indicated by the symbols lettered 'A' to 'F', shown in the illustration? EL-0016 A. Diodes B. Linear inductors C. Capacitors D. Transistors

Last Answer : Answer: A

High vacuum diodes, gas-filled diodes, and germanium semiconductor diodes may all be used as _____________. A. potentiometers B. rectifiers C. power sources D. photocells

Description : High vacuum diodes, gas-filled diodes, and germanium semiconductor diodes may all be used as _____________. A. potentiometers B. rectifiers C. power sources D. photocells

Last Answer : Answer: B

Silicon diodes designed for a specific reverse breakdown voltage, become useful as an electronic power supply voltage regulator, called _____________. A. tunnel diodes B. hot-carrier diodes C. compensating diodes D. Zener diodes

Description : Silicon diodes designed for a specific reverse breakdown voltage, become useful as an electronic power supply voltage regulator, called _____________. A. tunnel diodes B. hot-carrier diodes C. compensating diodes D. Zener diodes

Last Answer : Answer: D

Heat sinks are frequently used with _____________. A. power transistors B. vacuum tubes C. tunnel rectifier diodes D. all of the above

Description : Heat sinks are frequently used with _____________. A. power transistors B. vacuum tubes C. tunnel rectifier diodes D. all of the above

Last Answer : Answer: A

The use of four diodes, in a full-wave bridge rectifier circuit, will __________. A. provide unidirectional current to the load B. allow a very high leakage current from the load C. convert direct current to alternating current D. offer high opposition to current in two directions

Description : The use of four diodes, in a full-wave bridge rectifier circuit, will __________. A. provide unidirectional current to the load B. allow a very high leakage current from the load C. convert direct current to alternating current D. offer high opposition to current in two directions

Last Answer : Answer: A

What types of inverters require feedback diodes?

Description : What types of inverters require feedback diodes?

Last Answer : VSI with RL load.

Why diodes should be connected in antiparallel with the thyristors in inverter circuits?

Description : Why diodes should be connected in antiparallel with the thyristors in inverter circuits?

Last Answer : For RL loads, load current will not be in phase with load voltage and the diodes connected in antiparallel will allow the current to flow when the main thyristors are turned off. These diodes are called feedback diodes.

What are the advantages of freewheeling diodes in a controlled in a controlled rectifier?

Description : What are the advantages of freewheeling diodes in a controlled in a controlled rectifier?

Last Answer : a. Input power factor is improved. b. Load current waveform is improved and thus the load performance is better.

What is the function of freewheeling diodes in controlled rectifier?

Description : What is the function of freewheeling diodes in controlled rectifier?

Last Answer : It serves two process. a. It prevents the output voltage from becoming negative. b. The load current is transferred from the main thyristors to the freewheeling diode, thereby allowing all of its thyristors to regain their blocking states.

Mention the different types of diodes and one use of each.

Description : Mention the different types of diodes and one use of each.

Last Answer : a) Light Emitting Diode (LED): They are used in lighting, display units of electric and electronic devices. b) Zener diode: It is used in voltage stabilizers. c) Photodiode: It is used in light sensitive semiconductors. d) Laser diode: It is used in fiber optical fibre communications.

Vacuum tubes have been replaced by-----? A. Conductors B. Diodes C. Transistors (Answer) D. None of these

Description : Vacuum tubes have been replaced by-----? A. Conductors B. Diodes C. Transistors (Answer) D. None of these

Last Answer : C. Transistors (Answer)

Define semiconductor diodes.

Description : Define semiconductor diodes.

Last Answer : It is a device in which electric current can flow in one direction. It has 2 terminals P and N.

Current limited power supplies can prevent damage to A) Rectifier diodes and power transformers. B) Pass transistors C) Other circuits in the system D) All of the above.

Description : Current limited power supplies can prevent damage to A) Rectifier diodes and power transformers. B) Pass transistors C) Other circuits in the system D) All of the above.

Last Answer : D) All of the above.

Germanium diodes are used in AM detectors because ___

Description : Germanium diodes are used in AM detectors because ___

Last Answer : they minimize distortion from nonlinearit

The number of diodes used in bridge rectifier circuit is (a) 4 (b) 3 (c) 2 (d)

Description : The number of diodes used in bridge rectifier circuit is (a) 4 (b) 3 (c) 2 (d)

Last Answer : (a) 4