Description : A shunt-type voltage regulator is connected in serial/parallel (which one) with the load resistance.
Last Answer : In parallel.
Description : The simplest method of controlling the terminal voltage of compound-wound DC generator is with a _____________. A. hand-operated field rheostat connected in series with the shunt field circuit B. ... in series with the load D. balance coil diverting neutral current through the shunt field
Last Answer : Answer: A
Description : In a full-wave voltage doubler, are the capacitors connected in series or in parallel with the output load?
Description : When a series voltage regulator is used to control output voltages, any increase in the input voltage results in an increase/a decrease (which one) in the resistance of the regulating device.
Last Answer : An increase.
Description : When a series voltage regulator is used to control output voltages, any increase in the input voltage results in an increase/a decrease in the resistance of the regulating device.
Last Answer : Increase.
Description : Which of the methods listed is used to maintain the division of load between two compound-wound, DC generators operating in parallel? A. The shunt fields are interconnected. B. The shunt ... generators are connected in series. D. The equalizer connection parallels the series fields of all machines.
Last Answer : Answer: D
Description : Which of the following meters uses a shunt connected in series with the load, but parallel with the meter movement? A. voltmeter B. power factor meter C. wattmeter D. ammeter
Description : The shunt of a DC ammeter should be connected in __________. A. series with the load and in parallel with the meter movement B. parallel with the load and in series with the meter movement C. ... and in parallel with the meter movement D. series with the load and in series with the meter movement
Description : Which of the listed meters uses a shunt connected in series with the load, but parallel with the meter movement? A. Voltmeter B. Power factor meter C. Ammeter D. Wattmeter
Last Answer : Answer: C
Description : Which of the methods listed is used to maintain equal load sharing between two compound wound DC generators operating in parallel? A. The shunt fields are interconnected. B. The shunt field rheostats ... are connected in series. D. The series fields of both generators are connected in parallel.
Description : The shunt used in an ammeter should be connected in ____________. A. series with the load and in parallel with the meter movement B. parallel with the load and in series with the meter movement C. ... in parallel with the meter movement D. series with the load and in series with the meter movement
Description : For a diode to act as a rectifier, should it be connected in series or parallel with the load?
Last Answer : Series.
Description : Regarding an AC generator connected to the main electrical bus; as the electric load and power factor vary, a corresponding change is reflected in the generator armature reaction. These changes in ... . governor speed droop setting B. voltage regulator C. balance coil D. phase-balance relay
Last Answer : Answer: B
Description : Current measuring instruments must always be connected in _____________. A. series with a circuit B. parallel with a circuit C. series-parallel with a circuit D. delta with the shunt
Description : A DC shunt generator has its field windings connected in _____________. A. series with the series windings B. parallel with the field rheostat C. series with the armature windings D. parallel with the armature windings
Description : Which of the following types of DC motors has its field connected in parallel with its armature? A. Counter EMF B. Shunt C. Salient pole D. Series
Description : A good choice of shunt resistance will place the indicating pointer near what part of the meter scale with a normal load?
Last Answer : Midscale.
Description : When a resistor is used as a shunt and is connected in parallel with a meter movement coil, it will provide _____________. A. a measurement of circuit resistance B. an increased accuracy of approximately 1.5 percent C. an extended meter range D. none of the above
Description : Which of the following statements represents the correct method of connecting the shunt of an ammeter prior to taking a reading? A. In series with the load and in series with the meter movement. B. In ... with the meter movement. D. In parallel with the load and in parallel with the meter movement.
Description : To limit the current flow through a DC voltmeter to as low a value as possible, the moving coil circuit is provided with a/an _____________. A. high series resistance B. high parallel resistance C. series inductor D. external shunt
Description : A permanent magnet moving coil instrument gives full scale deflection of 25mA when a voltage of 75mV is applied across it. Calculate: (i) Resistance of shunt required for full scale deflection of 150 A. (ii) Series resistance for full scale deflection of 500 V.
Last Answer : Answer :
Description : Is an ammeter connected in series or in parallel with the circuit under test?
Last Answer : . In series.
Description : The purpose of a voltage regulator is to provide an output voltage with little or no __
Last Answer : Variation.
Description : The purpose of a voltage regulator is to provide an output voltage with little or no _
Description : Three resistors connected in parallel have values of 12 kΩ, 20kΩ, and 30kΩ. What is the equivalent resistance? A37. 6kΩ Q38. Two resistors connected in parallel have values of 10 kΩ and 30kΩ. What is eht equivalent resistance?
Last Answer : 7.5kΩ
Description : Four equal resistors are connected in parallel, each resistor has an ohmic value of 100 ohms, what is the equivalent resistance?
Last Answer : 25 ohms
Description : What structurally large, low-resistance conductor is connected in parallel with the meter movement to prevent damage?
Last Answer : Shunt.
Description : A circuit has a source voltage of 100 volts and two 50-ohm resistors connected in series. If the reference point for this circuit is placed between the two resistors, what would be the voltage at the reference point?
Last Answer : 50 volts.
Description : In a capacitor filter, is the capacitor in series or in parallel with the load?
Last Answer : Parallel.
Description : In a capacitor filter, is the capacitor in series or parallel with the load?
Description : What is the effect on total resistance and total current in a circuit if a short occurs in (a) a parallel branch, and (b) in a series portion?
Last Answer : (a) Total resistance decreases, total current increases (b) Total resistance decreases, total current increases
Description : What is the effect on total resistance and total current in a circuit if an open occurs in (a) a parallel branch, and (b) in a series portion?
Last Answer : (a) Total resistance increases, total current decreases (b) Total resistance becomes infinite, total current is equal to zero
Description : What is the arrangement of both series and shunt components called?
Last Answer : Combination peaking.
Description : What determines whether these components are considered series or shunt?
Last Answer : . The relationship of the components to the output-signal path.
Description : What is the difference between the series-fed and the shunt-fed Hartley oscillator?
Last Answer : In the series-fed Hartley oscillator, dc flows through the tank circuit.
Description : What advantage does a shunt motor have over a series motor?
Last Answer : It maintains a constant speed under varying loads.
Description : What will be the total output voltage if four 1.5 volt batteries are connected in a series-parallel arrangement as shown in the illustration? EL-0039 A. 1.5 volts B. 3.0 volts C. 4.5 volts D. 6.0 volts
Description : Which of the following statements represents the main difference between a relay and a contactor? A. Contactors control current and relays control voltage. B. A relay is series connected and a contactor ... loads than relays. D. Contactors are made from silver and relays are made from copper.
Last Answer : Req= (1/1200 +1/560 + 1/2.1)^-1 = 2.1 ohms RT= 2.1 + 7.8 = 9.9 ohms IT = V/R = 24/9.9 = 2.4 A Veq= R I = 2.1 2 ... 7.8 = 12.096 w = 44.928 w _________________________________________ By: Ellis-Junior Kamatjipose [email protected]
Description : Sketch circuit diagram of transistorized series voltage regulator and explain its working.
Last Answer : * This regulator has a transistor in series to the Zener regulator and both in parallel to the load. The transistor works as a variable resistor, regulating its collector emitter voltage in ... of output voltage compensates the initial increase in output voltage. Thus it acts as a regulator.
Description : A series circuit consisting of three resistors has a current of 3 amps. If R1 = 20 ohms, R2= 60 ohms, and R 3 = 80 ohms, what is the (a) total resistance and (b) source voltage of the circuit?
Last Answer : (a) 160 ohms. (b) 480 ohms
Description : The resistance of two conductors in series is `18 Omega` and the resistance becomes `4 Omega` when connected in parallel. Find the resistance of indiv
Last Answer : The resistance of two conductors in series is `18 Omega` and the resistance becomes `4 ... in parallel. Find the resistance of individual conductors.
Description : A `5 Omega` resistor is connected in series with a parallel combination of n resistors of `6 Omega` each. The equivalent resistance is `7 Omega`. Find
Last Answer : A `5 Omega` resistor is connected in series with a parallel combination of n resistors of `6 Omega ... The equivalent resistance is `7 Omega`. Find n.
Description : Out of five resistance of `ROmega` each 3 are connected in parallel and are joined to the rest 2 in series. Find the resultant resistance.
Last Answer : Out of five resistance of `ROmega` each 3 are connected in parallel and are joined to the rest 2 in series. Find ... `(7//8)ROmega` D. `(8//7)ROmega`
Description : By mistake, a voltmeter is connected in series and an ammeter is connected in parallel, with a resistance in an electrical circuit. What will happen t
Last Answer : By mistake, a voltmeter is connected in series and an ammeter is connected in parallel, with a ... be damaged D. Only the voltmeter will be damaged
Description : If electric resistance is to be decreased, then the number of resistances should be connected in – (1) Series (2) Parallel (3) Mixed arrangement (4) None of these
Last Answer : (2) Parallel Explanation: Resistors are in parallel when each resistor is connected directly to the voltage source by connecting wires having riegligible resistance. Each resistor thus has the full voltage ... same full voltage of the source applied to it, but divide the total current amongst them
Description : The electrical diagram shown in the illustration shows _____________. EL-0021 A. 'R1', 'R2', and 'R3' are connected is series B. 'R1', 'R2', and 'R3' are connected in parallel C. the voltages measured across ... if 'R1', 'R2' and 'R3' have different values D. the total resistance equals R1 + R2 + R3
Description : Which of the following statements is correct for the illustrated circuit? EL-0020 A. 'R1', 'R2', and 'R3' are connected in series. B. 'R1', 'R2', and 'R3' are connected in parallel. C. The voltages measured across 'R1', 'R2', and 'R3' are equal. D. The total resistance equals 1/R1 + 1/R2 + 1/R
Description : The speed of a squirrel-cage motor is usually changed by _____________. A. varying the frequency to the machine B. adding resistance in series with the stator windings C. adding resistance in parallel with the stator windings D. changing the number of connected poles in the stator
Description : A resistance in a circuit of unknown value is to be tested using the voltmeter/ammeter method. Therefore, the meters should be connected with _____________. A. both meters in series with the ... parallel with the resistance D. the ammeter in parallel and the voltmeter in series with the resistance