Very small displacements are effectively measured using

1 Answer

Answer :

Very small displacements are effectively measured using LVDT

Related questions

Description : To find the nodal displacements in all parts of the element, are used. a.shape function b.node function c.element function d.coordinate function

Last Answer : a.shape function

Description : Which of the following are scalars or vectors? Displacements, distance travelled, velocity, speed, force, work done, energy

Last Answer : Which of the following are scalars or vectors? Displacements, distance travelled, velocity, speed, force, work done, energy

Description : In the displacement method of structural analysis, the basic unknowns are (A) Displacements (B) Force (C) Displacements and forces (D) None of the above

Last Answer : (A) Displacements

Description : The vertical deflection of an electron beam on the screen of a CRO is measured to be 8 mm. Now, the potential difference between the Y-plates is doubled, and simultaneously the pre-accelerating anode voltage is reduced to half of ... on the screen would become (A) 64 mm (B) 32 mm (C) 8 mm (D) 1 mm

Last Answer : The vertical deflection of an electron beam on the screen of a CRO is measured to be 8 mm. Now, the potential difference between the Y-plates is doubled, and simultaneously the pre-accelerating ... of its previous value. Then, the vertical deflection of the beam on the screen would become 32 mm

Description : To distinguish between signals having very close values, we need an instrument with  (a) high accuracy (b) high resolution (c) high sensitivity (d) high linearity

Last Answer : To distinguish between signals having very close values, we need an instrument with high resolution

Description : Choose the correct statement  (a) Digital multimeters are built using current measuring elements, while analog multimeters are built using voltage measuring units (b) Digital multimeters are built ... measuring units (d) Both digital and analog multimeters are built using current measuring units

Last Answer : Choose the correct statement  (a) Digital multimeters are built using current measuring elements, while analog multimeters are built using voltage measuring units (b) Digital multimeters are built ... measuring units (d) Both digital and analog multimeters are built using current measuring units

Description : Transient signals can be observed using  (a) storage oscilloscope (b) sampling oscilloscope (c) wave analyzer (d) spectrum analyzer

Last Answer : Transient signals can be observed using storage oscilloscope

Description : Does being a "stable genius" mean that you clean up horse stalls very effectively?

Last Answer : Not at all. It means you know how to shovel horse shit.

Description : Aerobic biological oxidation ponds used for the purification of polluted water (A) Destroys/removes pathogen from the sewage (B) Is not very effective for non-biodegradable substances (e.g. ABS) containing effluents (C) ... much more effectively if the sewage is chlorinated (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

Description : Why are small value purchases order problematic How can purchasing more effectively deal with this problem?

Last Answer : supply chain for bicycle manufacturing

Description : Very small time intervals are accurately measured by the------? A. Pabsars B. White dwarfs C. Atomic Clocks (Answer) D. None of these

Last Answer : C. Atomic Clocks (Answer)

Description : Velocity of liquid hydrocarbon fuels in a pipeline cannot be measured by magnetic flow-meters, because their __________ is very low/small. (A) Thermal conductivity (B) Electrical conductivity (C) Specific gravity

Last Answer : (C) Specific gravity

Description : Very small pressure difference (< 5 mm water column) can be most conveniently measured by a/an __________ manometer. (A) U-tube water (B) U-tube mercury (C) Inclined tube mercury (D) Inclined tube water

Last Answer : (D) Inclined tube water

Description : Using Evernote effectively?

Last Answer : Evernote is the best application to store meeting notes and an occasional web clipping.Try putting everything in it that you want to hang onto and it can manage a multitude of notes very easily. You can get more information about Evernote here.

Description : What health-related activity could be effectively completed using only Internet resources?

Last Answer : Choosing a protein supplement

Description : Effectively Using Your Cover Letter and Resume Together?

Last Answer : Once a resume has been completed, the next step is to create acover letter. The cover letter is just as important as the resume.It give a perspective employer the opportunity to ... .Above and BeyondEmployers typically ask for applications to be filled out. Theysometimes ask for resumes in

Description : Using Email Sofware To Effectively Use Surveys?

Last Answer : "email technology can be a very effective way for organizations and businesses to distribute surveys and polls. But do the benefits outweigh the disadvantages? Short answer: Yes. But there are many ... services or to track sales or business trends, all while keeping the respondents' privacy secure."

Description : Which of the following is true? A. You can leverage paid advertising to put your best content in front of the right target audience. B. Before creating more social media platforms, B2C ... the unique characteristics of each social platform you consider working with. D. All of the above

Last Answer : D. All of the above

Description : A major benefit of using event sponsorship is that it A)enhances personal selling efforts. B)provides an excellent back-drop for advertisements. C)can provide large amounts of free media coverage. D)effectively neutralises the negative effects of unfavourable public relations.

Last Answer : C)can provide large amounts of free media coverage.

Description : need of calibration and explain the procedure to calibrate the instrument.

Last Answer : Need of calibration: Every measuring device degrades over time due to normal wear and tear. These changes can be caused by various reasons such as electric or mechanical shock or a hazardous manufacturing ... different magnitude are used to calculate the resistance based on ohm's law.

Description : Compare Dual slope DVM and SAR type DVM.

Last Answer : Sr no Dual slope DVM SAR type DVM 1 It is highly accurate It is moderately accurate 2 Cost is high It is inexpensive 3 Two comparator is used One comparator is used ... resolution Good resolution 5 Slow speed High speed 6 Less Error More error

Description : block diagram of logic analyzer.

Last Answer : A logic analyzer can be triggered on a complicated sequence of digital events, then capture a large amount of digital data from the system under test (SUT).When logic analysers first came ... Once the data are captured, they can be displayed several ways, from the simple) to the complex 

Description : operation of DSO with block diagram.

Last Answer : The input is amplified and attenuated with input amplifiers. The output of the input signal amplifiers feeds an analog to digital converter (ADC). There are numbers of ADC available. But the selection of ADC ... view the display on the CRT, the data from memory is reconstructed in analog form.

Description : sketch time period measurement by CRO.

Last Answer : Horizontal sweep is turned ON and the display appealing on the screen is adjusted by varying different control knobs provided on the front panel of CRO, till the signal is suitably displayed ... Where m=Number of division in one complete cycle n=Setting of time base =Time/Division

Description : operation of ramp type DVM.

Last Answer : This is given to an input comparator which will compare two signals and generates the output. One input to the input comparator is from the input and another input is from the ramp. This input voltage and ... ground and output is given. This output will stop the flow of purchase from clock

Description : operation of half wave rectifier type AC Voltmeter.

Last Answer :  Half-wave Rectifier Voltmeter The d'Arsonval meter movement only responds to the average or dc value of the current through the moving coil. In order to measure alternating ... ) input voltage signal alternating signal needs to be rectified first by using diode rectifier to produce 

Description :  operation of whetstone bridge. 

Last Answer : A Wheatstone bridge is widely used to measure the electrical resistance. This circuit is built with two known resistors, one unknown resistor and one variable resistor connected in the form of bridge. ... using a Wheatstone Bridge the unknown electrical resistance value can easily measure.

Description : role of the series resistance connected in PMMC movement.

Last Answer : A PMMC Instrument can be used as voltmeter by just connecting a series resistance with the moving coil. This series resistance is called Voltmeter Multiplier. This combination of moving coil and ... current whose voltage is to be measured. Ideally the resistance of voltmeter should be infinite

Description : different types of errors occurs in measurement.

Last Answer : Generally errors are classified into three types: systematic errors, random errors and blunders. 1) Gross Errors 2) Random Errors 3) Systematic Errors Instrumental Errors Environmental ... to wrong observations or reading in the instruments particularly in case of energy meter reading. 

Description : tern null as it applies to bridge measurement.

Last Answer : Null measurements balance voltages so that there is no current flowing through the measuring device and, therefore, no alteration of the circuit being measured. Null measurements are generally more ... the use of standard voltmeters and ammeters, and they still have limits to their precision.

Description : application of CRO.

Last Answer : Applications of CRO: 1) Voltage measurement. 2) Current measurement. 3) Measurement of phase difference. 4) Measurement of phase. 5) Measurement of frequency. 6) Measurement of inductance. ... in various circuits. 17) For checking transistor. 18) It can measure short time interval.

Description : How many non-overlapping channels are available in IEEE 802.11b

Last Answer : 3 non-overlapping channels are available in IEEE 802.11b

Description : Number of comparators required for an 8 bit flash ADC is: (1) 8 (2) 16 (3) 255 (4) 256

Last Answer : Number of comparators required for an 8 bit flash ADC is: 255

Description : In D/A converter, the resolution required is 50mv and the total maximum input is 10v. The number of bits required is   (A) 7 (B) 8 (C) 9 (D) 200

Last Answer : In D/A converter, the resolution required is 50mv and the total maximum input is 10v. The number of  bits required is 8 

Description : An analog voltmeter has a sensitivity of 10kΩ/volt. The galvanometer used in constructing the instrument will produce a full scale deflection when the current passed through it is  (a) 10 mA (b) 20 mA (c) 50 mA (d) 100 μA

Last Answer : An analog voltmeter has a sensitivity of 10kΩ/volt. The galvanometer used in constructing the instrument will produce a full scale deflection when the current passed through it is 100 μA

Description : An optical fiber cable laid underground has developed a discontinuity at a distance d from the source end. The fault can be located using the instrument  (a) Optical spectrum Analyzer (OSA) (b) Optical Time Domain Reflectometer (OTDR) (c) Optical Power Meter (OPM) (d) Laser Diffractometer (LD)

Last Answer : An optical fiber cable laid underground has developed a discontinuity at a distance d from the source end. The fault can be located using the instrument Optical Time Domain Reflectometer (OTDR) 

Description : Two sinusoidal signals of the same frequency are displayed on a dual-trace oscilloscope. One complete cycle of each signal covers 6 cm of the horizontal scale and the starting point of the horizontal scale and the starting ... between the two signals in degrees is  (a) 30 (b) 45 (c) 60 (d) 90

Last Answer : Two sinusoidal signals of the same frequency are displayed on a dual-trace oscilloscope. One complete cycle of each signal covers 6 cm of the horizontal scale and the starting point of the horizontal ... signals are separated by 0.5 cm. The phase difference between the two signals in degrees is 30

Description : The trace on an oscilloscope continually moves to the right of the screen when  (a) the sweep is triggered. (b) the sweep period is larger than the signal period. (c) the sweep period is smaller than the signal period. (d) there is no weep.

Last Answer : The trace on an oscilloscope continually moves to the right of the screen when the sweep period is smaller than the signal period. 

Description : In a dual trace oscilloscope, the display appears segmented when  (a) low frequency signals are observed in Alternate mode (b) low frequency signals are observed in Chop mode (c) high frequency signals are observed in Alternate mode (d) high frequency signals are observed in Chop mode

Last Answer : In a dual trace oscilloscope, the display appears segmented when high frequency signals are observed in Chop mode

Description : In a weighted-resistor digital-to-analog converter with 8-bit input, if the resistance corresponding to the MSB is 2K, what will be the resistance corresponding to the LSB?  (a) 250 Ω (d) 512 KΩ (c) 256 KΩ (d) 25.5 Ω

Last Answer : In a weighted-resistor digital-to-analog converter with 8-bit input, if the resistance corresponding to the MSB is 2K, what will be the resistance corresponding to the LSB?  (a) 250 Ω (d) 512 KΩ (c) 256 KΩ (d) 25.5 Ω

Description : ESD stands for

Last Answer : ESD stands for Electro static Discharge

Description : In a particular circuit connection, AWG 18 wire is selected over AWG 22. The reason is that it is having

Last Answer : In a particular circuit connection, AWG 18 wire is selected over AWG 22. The reason is that it is having Higher current carrying capacity

Description : Y –axis in a CRO normally represents

Last Answer : Volt 

Description : What are the types of error?

Last Answer : Human error or gross error, systematic error, applicational error and random error are the types of error.

Description : What are the factors influencing measurement errors?

Last Answer : The factor influencing measurement errors are accuracy, precision, range and bandwidth, sensitivity, resolution and uncertainty.

Description : What are the SI derived units?

Last Answer : Electrical capacitance, electrical resistance, electrical inductance, force, energy, power, magnetic flux, electric charge, and electric potential difference and EMF. These are the nine SI derived units.

Description : What are the seven base units?

Last Answer : Length, mass, time, electric current, temperature, luminous intensity and amount of substance are the seven base units.

Description : What is logic analyser?

Last Answer : Logic analyser is the extension of Oscilloscope. Logic analyser is used for troubleshooting digital circuits. Logic analyser can store digital data and it have 8 to 64 channels. Logic analyser are used for Hardware verification, fault analysis and automated testing.

Description : What is digital storage oscilloscope (DSO)?

Last Answer : Digital storage oscilloscope have many advantages as compared to analogue oscilloscope. Digital storage oscilloscope uses analogue to digital converter and digital to analogue converter and also it ... oscilloscope is used for comparing waveforms and recording and it have many different uses.

Description : What is phosphorescence and fluorescence?

Last Answer : Fluorescence is the light produced when the source of energy is applied. The light produced after the removal of source of energy is known as phosphorescence.