Resistance of a copper wire decreases when ......................increases

1 Answer

Answer :

Resistance of a copper wire decreases when diameter increases

Related questions

Description : When the length and cross sectional area of a wire are both tripled, the resistance _____________. A. increases nine fold B. increases three fold C. remains the same D. decreases six fold

Last Answer : Answer: C

Description : When the current flow through a copper wire increases, its _____________. A. resistance will decrease B. insulation will burn C. temperature will increase D. conductivity will increase

Last Answer : Answer: C

Description : A copper disc has a hole. If the disc is heated, the size of the hole - (1) increases (2) decreases (3) No change (4) first increases and than decreases

Last Answer : (1) increases Explanation: When a metal plate with a circular hole at its centre is heated, definitely along with the areal expansion of the plate the diameter (sum of two radii) of the circular hole also increases.

Description : A copper disc has a hole. If the disc is heated, the size of the hole (1) increases (2) decreases (3) No change (4) first increases and than decreases

Last Answer : increases

Description : A copper wire has a resistance of \( 0.60 hm \). Anozner copper wire of the samemass as the first one is dou ble in length of the first. Find the resistance of the second wire.

Last Answer : A copper wire has a resistance of \( 0.6 0hm \). Another copper wire of the same mass as ... of the first. Find the resistance of the second wire.

Description : The temperature coefficient of copper is `0.004^(@)C^(-1)`. Find the resistance of a 5 m long copper wire of diameter 0.2 mm at `100^(@)C`, if the res

Last Answer : The temperature coefficient of copper is `0.004^(@)C^(-1)`. Find the resistance of a 5 m long copper wire of ... `0^(@)C` is `1.7xx10^(-8) Omega` m.

Description : Given that resistivity of copper is `1.68xx10^(-8) Omega`m. Calculate the amount of copper required to draw a wire 10 km long having resistance of `10

Last Answer : Given that resistivity of copper is `1.68xx10^(-8) Omega`m. Calculate the amount of copper required to draw a ... copper is `8.9xx10^(3) kg m^(-3)`.

Description : `1kg` piece of copper is drawn into a wire `1mm` thick and another piece into a wire `2mm` thick. Compare the resistance of these wires.

Last Answer : `1kg` piece of copper is drawn into a wire `1mm` thick and another piece into a wire `2mm` thick. Compare the resistance of these wires.

Description : Two copper wires A and B of equal masses are taken. The length of A is double the length of B. If the resistance of wire A is `160 Omega `, then calcu

Last Answer : Two copper wires A and B of equal masses are taken. The length of A is double the length of ... Omega `, then calculate the resistance of the wire B.

Description : What copper wire would have the highest resistance?

Last Answer : Need answer

Description : If a copper wire is increased to double its length, its resistance will become – (1) four times (2) one-fourth (3) double (4) half

Last Answer : (3) double Explanation: There is a direct relationship between the amount of resistance encountered by charge and the length of wire it must traverse. After all, if resistance occurs as the result of collisions ... the atoms of the wire, then there is likely to be more collisions in a longer wire.

Description : A coil is wound with 400 feet of No. 16 tinned copper wire and connected to a 12 volt battery. What is the current if the resistance per 1000 feet of No. 16 tinned copper wire is 4.26 ohms? A. 4.8 amps B. 7.06 amps C. 10.65 amps D. 11.27 amps

Last Answer : Answer: B

Description : A coil is wound with 200 feet of No. 16 tinned copper wire and connected to a 12 volt battery. What is the current if the resistance per 1000 feet of No. 16 tinned copper wire is 4.26 ohms? A. 1.14 amps B. 7.04 amps C. 10.22 amps D. 14.08 amps

Last Answer : Answer: D

Description : Which of the following statements about copper wire sized by the AWG rating is correct? A. Number 12 AWG wire has a higher current rating than number 10 AWG wire. B. Number 10 AWG wire has a higher ... Number 12 AWG wire at 25°C has more resistance per 1000 feet than No. 10 AWG wire at 25°C.

Last Answer : Answer: D

Description : Which of the following statements concerning copper wire sized by AWG numbers is correct? A. Number 12 AWG wire has a higher current rating than 10 AWG wire. B. Number 12 AWG wire at 25°C has more ... dielectric strength than 12 AWG wire. D. Number 12 AWG wire is larger than number 10 AWG wire.

Last Answer : Answer: B

Description : What is the diameter of a copper wire to be used in a 16 km loop with a dc loop resistance of 100 ohms/km? A. 0.108 cm B. 1.082 cm C. 0.017 cm D. 0.0465 cm

Last Answer : D. 0.0465 cm

Description : The resistance wire used in a hot wire anemometer for conducting electrical current is made of (A) Copper (B) Tungsten (C) Chromium (D) Aluminium

Last Answer : (B) Tungsten

Description : Which wire has the least resistance? Wire A-copper, 1000 circular mils, 6 inches long. Wire B-copper, 2000 circular mils, 11 inches long.

Last Answer : Wire B.

Description : If a copper wire is increased to double its length, its resistance will become (1) four times (2) one–fourth (3) double (4) half

Last Answer : double

Description : For which of the following substances, the resistance decreases with increase in temperature? (1) Pure silicon (2) Copper (3) Nichrome (4) Platinum

Last Answer : (3) Nichrome Explanation: Nichrome has high resistance and it is called a resistor.

Description : The resistance of most conducting materials will change as a result of temperature change. The resistance of copper will _____________. A. increase as temperature decreases B. decrease as temperature decreases C. remain the same between 20°F and 110°F D. remain the same between 68°F and 230°F

Last Answer : Answer: B

Description : For which of the following substances, the resistance decreases with increase in temperature? (1) Pure silicon (2) Copper (3) Nichrome (4) Platinum

Last Answer : Nichrome

Description : Indicate the false statement about the resistance of a wire – (1) it depends on material of wire (2) it is directly proportional to the length of wire (3) it is directly proportional to the area of crosssection of wire (4) resistance of metallic wire increases with increase in temperature

Last Answer : (3) it is directly proportional to the area of cross-section of wire Explanation: The property of conductor due to which it opposes the flow of current through it is called Resistance. It is ... potential difference across its ends to the current flowing through it The SI unit of resistance is ohm.

Description : The resistance of electric wire will decrease as its _______________. A. length increases B. cross-sectional area increases C. temperature increases D. percent of metallic purities increases

Last Answer : Answer: B

Description : Indicate the false statement about the resistance of a wire (1) it depends on material of wire (2) it is directly proportional to the length of wire (3) it is directly proportional to the area of cross-section of wire (4) resistance of metallic wire increases with increase in temperature

Last Answer :  it is directly proportional to the area of cross-section of wire

Description : When the voltage remains constant, and the resistance increases in a series circuit, current flow _____________. A. decreases B. remains the same C. increases D. increases by the square

Last Answer : Answer: A

Description : When the voltage remains constant and the resistance is increased in a series circuit, the flow of current _____________. A. increases by the square of the original value B. increases C. remains the same D. decreases

Last Answer : Answer: D

Description : Vulcanisation of rubber (A) Decreases its tensile strength (B) Increases its ozone & oxygen reactivity (C) Increases its oil & solvent resistance (D) Converts its plasticity into elasticity

Last Answer : (D) Converts its plasticity into elasticity

Description : . In constant pressure filtration, (A) Resistance decreases with time (B) Rate of filtration is constant (C) Rate of filtration increases with time (D) Rate of filtration decreases with time

Last Answer : (D) Rate of filtration decreases with time

Description : During the washing of cake (A) All the resistances are constant (B) Filter medium resistance increases (C) Filter medium resistance decreases (D) Cake resistance decreases

Last Answer : (A) All the resistances are constant

Description : With increase in the pressure drop across the cake, the specific cake resistance for the compressible sludge (A) Increases (B) Decreases (C) Remains constant (D) Increases linearly

Last Answer : (A) Increases

Description : When temperature rises, resistance of negative temperature coefficient thermistor A. increases B. decreases C. zero D. infinity

Last Answer : decreases

Description : Presence of a non-condensing gas in a condensing vapour (A) Increases the rate of condensation (B) Decreases thermal resistance (C) Is desirable to increase the film co-efficient (D) None of these

Last Answer : (D) None of these

Description : Increase in ash content of blast furnace coke (A) Reduces its consumption in the furnace (B) Increases its consumption in the furnace (C) Does not affect its consumption in the furnace (D) Decreases its hardness and abrasion resistance

Last Answer : (B) Increases its consumption in the furnace

Description : When the water is warm, the height to which it can be lifted by a pump (A) Decreases due to reduced viscosity (B) Decreases due to reduced vapour pressure (C) Increases due to increased vapour pressure (D) Decreases due to increased frictional resistance

Last Answer : (B) Decreases due to reduced vapour pressure

Description : Vulcanisation of rubber (A) Decreases its tensile strength (B) Increases its ozone & oxygen reactivity (C) Increases its oil & solvent resistance (D) Converts its plasticity into elasticity

Last Answer : (D) Converts its plasticity into elasticity

Description : With decrease in the grain size of a material, its creep resistance (A) Increases (B) Decreases (C) Remain constant (D) Either (A) or (B); depends on the material

Last Answer : (C) Remain constant

Description : The entrained air in concrete (A) Increases workability (B) Decreases workability (C) Decreases resistance to weathering (D) Increases stress

Last Answer : Answer: Option A

Description : The entrained air in concrete [ A ] Increases the strength [ B ] Decreases the resistance to weathering [ C ] Increases the workability [ D ] Decreases the workability

Last Answer : [ C ] Increases the workability

Description : Select the incorrect statement [ A ] R.C.C has better fire resistance than steel [ B ] R.C.C. structure is economical than steel structure [ C ] Strength of concrete decreases as age increases [ D ] R.C.C can be used for under water and marine structures

Last Answer : [ C ] Strength of concrete decreases as age increases

Description : According to Ohm’s law, what happens to circuit current if circuit resistance (a) increases, (b) decreases?

Last Answer : (a) Current decreases (b) Current increases

Description : Air resistance ______ with an increase in the speed of the object moving through it. a) increases b)decreases c)remains same d)no change

Last Answer : a) increases

Description : After a projectile is fired horizontally near the earth's surface, the horizontal component of its velocity, neglecting any air resistance: w) increases steadily x) decreases steadily y) first decreases, then increases z) remains constant

Last Answer : ANSWER: Z -- REMAINS CONSTANT 

Description :  A copper wire of length l and diameter d has potential difference V applied at its two ends. The drift velocity is vd . If the diameter of wire is made d/3, then drift velocity becomes

Last Answer :  A copper wire of length l and diameter d has potential difference V applied at its two ends. The drift velocity is vd . If the diameter of wire is made d/3, then drift velocity becomes vd.

Description : A sine wave voltage is applied across an inductor. When the frequency of the voltage is decreased, the current decreases.

Last Answer : The question seems to be wrong. Increase in frequency would actually decrease the current through the Inductor. This happens because inductive reactance Xl is directly proportional to frequency. And if frequency increases the value of Xl would ... vice versa. Xl= 2*pi*f*L I=E/Z Z=sqrt(R^2+Xl^2)

Description : If Poisson's ratio of a resistance wire strain gauge is 1.8, then neglecting piezo-resistive effects, its Gauge factor is :  (A) 2.8 (B) 2.6 (C) 4.6 (D) 3.6

Last Answer : If Poisson's ratio of a resistance wire strain gauge is 1.8, then neglecting piezo-resistive effects, its Gauge factor is : 4.6

Description : What happens to the resistance of a wire when its length as well as the cross-sectional area are doubled? A) It doubles B) It becomes 4 times C) It becomes 2π times D) It remains the same

Last Answer : Automatically the resistivity will increase as they are the factors affecting the resistivity 

Description : What is the resistance of a 160 m wire with a uniform diameter of 0.28 mm, if the specific resistance is 12.32 μΩ-cm? A) 3.2 Ω B) 3.2 μΩ C) 0.8 Ω D) None of these

Last Answer : What is the resistance of a 160 m wire with a uniform diameter of 0.28 mm, if the specific resistance is 12.32 μΩ-cm? A) 3.2 Ω B) 3.2 μΩ C) 0.8 Ω D) None of these

Description : A drawn wire of resistance 5 Ω is further drawn so that its diameter becomes one-fifth of the original. What is its resistance with volume remaining the same ? (a) 25 Ω (b) 125 Ω (c) 625 Ω (d) 3125 Ω

Last Answer : A drawn wire of resistance 5 Ω is further drawn so that its diameter becomes one-fifth of the original. What is its resistance with volume remaining the same ? (a) 25 Ω (b) 125 Ω (c) 625 Ω (d) 3125 Ω

Description : A nichrome wire used as heater coil has the resistance of 1 ohm/m. For a heater of 1000 W at 200 V, the length of wire required will be 

Last Answer : A nichrome wire used as heater coil has the resistance of 1 ohm/m. For a heater of 1000 W at 200 V, the length of wire required will be 40 m.