The TRIAC is similar in operation to what device?

1 Answer

Answer :

SCR

Related questions

Description : When used for ac current control, during which alternation of the ac cycle does the TRIAC control current flow?

Last Answer : During both alternations.

Description : When a Triac is properly gated, what is/are the direction(s) of current flow between anodes 1 and 2?

Last Answer : Current is allowed to flow in either direction.

Description : With neat sketch explain four modes of operation of a TRIAC? 

Last Answer : Modes of operation of a TRIAC: There are four different operating modes of TRIAC:  1) MT2 and gate are positive with respect to terminal MT1(Mode1) : Here terminal MT2 is positive ... junction P2-N2 is forward biased, current carriers are injected and therefore, the TRIAC is turned on. 

Description : A triac thyristor functions as a control device and is basically ________________. A. two NPN transistors in parallel with a common base lead B. a diode in series with a temperature sensitive capacitor C. two ... -back SCR's with a common gate lead D. a triode tube with an extra heavy grid element

Last Answer : Answer: C

Description : A triac is a device which acts as a  A) Diode in forward direction and thrylistor in the reverse direction B) Thyristor in both directions C) Diode in both directions D) Thyristor in forward direction and diode in reverse direction

Last Answer : A triac is a device which acts as a Thyristor in both directions

Description : Figure 'D' shown in the illustration represents a/an ____________. EL-0078 A. DIP IC chip B. integrated diac/triac envelope C. TO-5 flat pack D. 7-segment BCD display

Last Answer : Answer: A

Description : Figure 'A' of the diagram shown in the illustration represents a/an ____________. EL-0078 A. silicon controlled rectifier B. IG or MOS field effect transistor C. triac thyristor D. junction field effect transistor

Last Answer : Answer: B

Description : What is TRIAC ?

Last Answer : TRIAC is three terminal semiconductor device for controlling current. TRIAC is bidirectional device. TRIAC is use for AC switching applications because it can control the current flow over both halves of ... as convenient for some high power applications where its switching is more difficult.

Description : Draw symbol & V-I characteristics of (i) LASCR (ii) DIAC (iii) TRIAC

Last Answer : (i) LASCR:  (ii) DIAC:  (iii) TRIAC: 

Description : Speed control of the motor using TRIAC

Last Answer : Speed control of the motor using TRIAC:  This basic phase triggering circuit uses the triac in series with the motor across an AC sinusoidal supply. The variable resistor, VR1 is used ... meaning that it may not trigger at the exact same point for each positive and negative half cycle.

Description : Compare SCR and TRIAC

Last Answer : SCR TRIAC It is an unidirectional device. It is a bidirectional device. It is turned-on by only positive gate current. It can be turned-on by either ... applications including lamp dimmer, heating control, zero voltage switched AC relay, small AC motor control etc.

Description : Draw the symbol of GTO and TRIAC.

Last Answer : 1) GTO: 2) TRIAC: 

Description : Triac are usually operated at:

Last Answer : Triac are usually operated at: power frequency

Description : SCR is more utilized as compared to Triac because it is

Last Answer : SCR is more utilized as compared to Triac because it is available with higher ratings

Last Answer :  A Triac is a Bi-directional power switch

Last Answer : A Triac has Three terminals

Last Answer : Yes, we can use triac in the multi-quadrant chopper.

Description : Describe triggering circuit for TRIAC using DIAC.

Last Answer : Triggering circuit for TRIAC using DIAC: DIAC stands for diode alternating current. It's a two terminal four layer bidirectional device. It conducts in both directions. DIAC is used for triggering TRIAC. ... of DIAC to the gate terminal of TRIAC reduces the harmonics.

Description : What is TRIAC?

Last Answer : TRIAC Structure:  Operating Principle: A triac is a three terminal, five layer semiconductor device. It is equivalent to two separate SCRs connected in anti-parallel with gates common. ... for electric fans and other electric motors. v. Heating control vi. Zero voltage switched relay

Description : The field arrangements in waveguides are divided into what two categories to describe the various modes of operation?

Last Answer : Transverse electric (TE) and transverse magnetic (TM).

Description : What amplifier class of operation is the most inefficient but has the least distortion?

Last Answer : Class A.

Description : What two primary items determine the class of operation of an amplifier?

Last Answer : The amount of bias and the amplitude of the input signal

Description : Once ionization has occurred in a thyratron, what control does the control grid have over the tube’s operation?

Last Answer : None.

Description : What type of clock is used when more than one operation is to be completed during one clock cycle?

Last Answer : . A multiphase clock.

Description : What is the sign of operation for the X-OR gate?

Last Answer : XOR

Description : What is the key to FET operation?

Last Answer : Effective cross-sectional area of the channel.

Description : What type of bias is required for proper operation of a photodiode?

Last Answer : Reverse bias.

Description : What type of diagram is the most useful in learning the overall operation of a system?

Last Answer : A schematic diagram.

Description : What is the effect on magnetron operation if the magnetic field strength is too high?

Last Answer : The magnetron will not oscillate.

Description : What is the effect on magnetron operation if the magnetic field strength is too high?

Last Answer : The magnetron will not oscillate.

Description : What are the required radar inputs for proper indicator operation?

Last Answer : Triggers, video, and antenna information.

Description : Tracking radar searches a small volume of space during which phase of operation?

Last Answer : Acquisition.

Description : What radar subsystem supplies timing signals to coordinate the operation of the complete system?

Last Answer : Synchronizer.

Description : Quality fiber-end preparation is essential for proper system operation. What properties must an optical fiber-end face have to ensure proper fiber connection?

Last Answer : Be flat, smooth, and perpendicular to the fiber axis.

Description : In single mode operation, the value of the normalized frequency (V) should remain near the 2.405 level. If the value of V is less than 1, do single mode fibers carry a majority of the power in the core or cladding material?

Last Answer : Cladding material.

Description : For efficient operation, should a detector have a high or low responsivity at the operating wavelength?

Last Answer : High.

Description : Describe the operation of an optical detector

Last Answer : It is a transducer that converts an optical signal into an electrical signal. It does this by generating an electrical current proportional to the intensity of incident optical radiation.

Description : A computer that is designed to perform a specific operation and usually satisfies the needs of a particular type of problem, is said to be what type of computer?

Last Answer : Special-purpose.

Description : The underlying principle of operation of the parametric amplifier is based on what property?

Last Answer : Reactance.

Description : Why is the pi mode the most commonly used magnetron mode of operation

Last Answer : Greater power output.

Description : If the constant-speed electrons in a reflex klystron remain in the repeller field for 1 3/4 cycles, what is the mode of operation?

Last Answer : Mode 2.

Description : What is the basic principle of operation of a klystron?

Last Answer : Velocity modulation

Description : What limits the tuning range around the center frequency of a reflex klystron in a particular mode of operation?

Last Answer : The half-power points of the mode.

Description : How do the tape guides on a tape reeling system protect the tape from damage during operation?

Last Answer : They keep the tape straight with respect to both the supply and take-up reels and the magnetic heads.

Description : What are the five most prominent communications modes of operation?

Last Answer : Simplex, half-duplex, semiduplex, duplex, and broadcast.

Description : The suppressor grid is added to a tetrode to reduce what undesirable characteristic of tetrode operation?

Last Answer : Secondary emission.

Description : Operation of an accelerometer is based on what physical property?

Last Answer : Inertia.

Description : What gyro characteristic provides the basis of the operation of a rate gyro?

Last Answer : Precession.

Description : What are the two teletypewriter modes of operation?

Last Answer : Synchronous and nonsynchronous

Description : Which dispersion mechanism (material or waveguide) is a function of the size of the fiber's core relative to the wavelength of operation?

Last Answer : Waveguide dispersion.