Four inductors each of inductance 1mH are connected in parallel and this combination is connected in series with two inductors each of inductance 1mH. Calculate the equivalent inductance?

1 Answer

Answer :

Four inductors each of inductance 1mH are connected in parallel and this combination is connected in series with two inductors each of inductance 1mH. Calculate the equivalent inductance?

2.25 mH

Related questions

Description : An inductor is connected in series with SCR to protect it from A) Excessive high voltage B) Excessive high dv/dt C) Excessive high di/dt D) Excessive large forward current 

Last Answer : An inductor is connected in series with SCR to protect it from Excessive high di/dt

Description : A two farad and a four farad capacitor are connected in parallel. What single capacitance is "equivalent" to this combination? 

Last Answer : ANSWER: 6 FARADS

Description : The parameters of Transmission line are R = 50 Ω/ km, L= 1mH/km ,C = 0.1µf/km, G = 2µV/km. calculate characteristic impedance.

Last Answer : The parameters of Transmission line are R = 50 Ω/ km, L= 1mH/km ,C = 0.1µf/km, G = 2µV/km. calculate characteristic impedance.

Description : A coil =of inductance `L=50muH` and resistance =`0.5Omega` is connected to a battery of emf=5A. A resistance of `10Omega` is connected parallel to the

Last Answer : A coil =of inductance `L=50muH` and resistance =`0.5Omega` is connected to a battery of emf=5A. A resistance ... is (0.02)x in mJ. Find valuie of x.

Description : A coil of inductance 240 mH and resistance 75 Ohm is connected in parallel with a capacitor across a 30 V, variable frequency supply. The current drawn by the circuit is found to be minimum when the supply frequency is 1 kHz. The ... (A) 40, 400 Hz (B) 10, 100 Hz (C) 20, 50 Hz (D) 50, 20 Hz

Last Answer : A coil of inductance 240 mH and resistance 75 Ohm is connected in parallel with a capacitor across a 30 V, variable frequency supply. The current drawn by the circuit is found to be minimum ... supply frequency is 1 kHz. The approximate values of Q-factor and bandwidth are, respectively 20, 50 Hz

Description : A network consists of several inductances connected in parallel. The equivalent inductance of the network is given by (A) the sum of the individual inductances. (B) the reciprocal of the ... of individual inductances. (D) the reciprocal of the sum of reciprocals of individual inductances.

Last Answer : A network consists of several inductances connected in parallel. The equivalent inductance of the network is given by the reciprocal of the sum of reciprocals of individual inductances.

Description : Three identical cells each of emf 2 V and unknown internal resistance are connected in parallel. This combination is connected to a `5 Omega` resistor

Last Answer : Three identical cells each of emf 2 V and unknown internal resistance are connected in parallel. ... what is the internal resistance of each cell ?

Description : A `5 Omega` resistor is connected in series with a parallel combination of n resistors of `6 Omega` each. The equivalent resistance is `7 Omega`. Find

Last Answer : A `5 Omega` resistor is connected in series with a parallel combination of n resistors of `6 Omega ... The equivalent resistance is `7 Omega`. Find n.

Description : `6Omega` and `12Omega` resistors are connected in parallel. This combination is connected in series with 10 V battery and `6 Omega` resistor. What is

Last Answer : `6Omega` and `12Omega` resistors are connected in parallel. This combination is connected in series with 10 V battery and ... 4 V B. 16 V C. 2 D. 8 V

Description : Two resistors of resistances `2Omega` and `6Omega` are connected in parallel. This combination is then connected to a battery of emf 2 V and internal

Last Answer : Two resistors of resistances `2Omega` and `6Omega` are connected in parallel. This combination is then connected to a ... . `(4)/(17)A` D. `1 A`

Description : A wire of resistance R is cut into ‘n’ equal parts. These parts are then connected in parallel. The equivalent resistance of the combination will be – (1) nR (2) R/n (3) n/R (4) R/n²

Last Answer : (4) R/n² Explanation: Since R is directly proportional to length of the wire, when wire is cut into equal parts, then Resistance of each part = R/n

Description : A five ohm and a ten ohm resistor are connected in parallel, what single resistance is "equivalent" to this combination? 

Last Answer : ANSWER: 3 AND 1/3 OHM

Description : A resistor of value R/2 is connected in parallel with a resistor of value R/3. The voltage drop across the parallel combination is V. The total current supplied by the voltage source is: w) 2 V/R (read: 2 V over R) x) 3 V/R (read: 3 V over R) y) 4 V/R (read: 4 V over R) z) 5 V/R (read: 5 V over R)

Last Answer : ANSWER: Z -- 5 V/R

Description : A wire of resistance R is cut into ‘n’ equal parts. These parts are then connected in parallel. The equivalent resistance of the combination will be

Last Answer : R/n2

Description : Which of the devices listed is indicated by the symbols lettered 'A' to 'F', shown in the illustration? EL-0016 A. Diodes B. Linear inductors C. Capacitors D. Transistors

Last Answer : Answer: A

Description : The substances which have a large number of free electrons and offer a low resistance are called (a) insulators (b) inductors (c) semi-conductors (d) conductors

Last Answer : (d) conductors

Description : When the capacitors of a Wein Bridge are replaced by inductors, the bridge becomes ___

Last Answer : Wein Inductance Bridge

Description : What bridge is used to measure high-Q inductors? (Q>10)

Last Answer : hay bridge

Description : The voltage drop, for constant voltage transmission is compensated by installing (a) inductors (b) capacitors (c) synchronous motors (d) all of above (e) none of the above

Last Answer : (c) synchronous motors

Description : Capacitors and inductors are commonly used in circuits. Capacitors store electrical energy in the electric field between their plates. How do inductors store energy?

Last Answer : ANSWER: IN A MAGNETIC FIELD SURROUNDING THE INDUCTOR 

Description : State two types of inductors and give their applications.

Last Answer : Types of inductors: i) Air cored inductor ii) Iron cored inductor iii) Ferrite cored inductor Air cored inductor: These are used for high frequency application e.g. Radio sets ... radio receiver, wide band pulse transformers, oscillators, signal generators, high frequency amplifiers, etc. 

Description : inductors have a high impedance when?

Last Answer : When you increase the number of turns.

Description : can inductors have resistance?

Last Answer : Yesss every inductor has resistance ... Because it is also made up of good conductor have some value of resistance practicaly But ideal inductor has resistance is zero

Description : Four equal resistors are connected in parallel, each resistor has an ohmic value of 100 ohms, what is the equivalent resistance?

Last Answer : 25 ohms

Description : A two farad and a four farad capacitor are connected in series. What single capacitance is "equivalent" to this combination?

Last Answer : ANSWER: 4/3 FARADS

Description : A capacitor of capacity `2muF` is changed to a potential different of `12V` . It is then connected across an inductor of inductance `0.6mH` What is th

Last Answer : A capacitor of capacity `2muF` is changed to a potential different of `12V` . It is then ... potential difference across the capacitor is `6.0V` ?

Description : The circuit shows a resistance, `R=0.01Omega` and inductance L=3mH connected toa conducting rod PQ of length l=wm which can slide on a perfectly condu

Last Answer : The circuit shows a resistance, `R=0.01Omega` and inductance L=3mH connected toa conducting rod PQ of length l= ... (inN-m) at t=(0.3In 2) second.

Description : The circuit shows a resistance, `R=0.01Omega` and inductance L=3mH connected to a conducting rod PQ of length l=wm which can slide on a perfectly cond

Last Answer : The circuit shows a resistance, `R=0.01Omega` and inductance L=3mH connected to a conducting rod PQ of length ... (inN-m) at t=(0.3In 2) second.

Last Answer : If an inductance is connected in one arm of bridge and resistances in the remaining three arms the bridge cannot be balanced.

Description : If an antenna is too short for the wavelength being used, the effective length can be increased by adding: A. capacitance in series B. inductance in series C. resistance in parallel D. resistance in series

Last Answer : B. inductance in series

Description : The `n` rows each containinig `m` cells in series are joined parallel. Maximum current is taken from this combination across jan external resistance o

Last Answer : The `n` rows each containinig `m` cells in series are joined parallel. Maximum current is taken from this combination ... n = 2 D. m = 2, n = 12

Description : Assertion : Two 60 W bulbs are first connected in series and then in parallel with same battery. Total power produced in second case will become four

Last Answer : Assertion : Two 60 W bulbs are first connected in series and then in parallel with same battery. ... D. If Assertion is false but Reason is true.

Description : Assertion : A resistance wire is broken into four pices and all are connected in parallel. Then, net resistance becomes 1/16 times. Reason : In parall

Last Answer : Assertion : A resistance wire is broken into four pices and all are connected in parallel. Then, net ... D. If Assertion is false but Reason is true.

Description : What will be the total output voltage if four 1.5 volt batteries are connected in a series-parallel arrangement as shown in the illustration? EL-0039 A. 1.5 volts B. 3.0 volts C. 4.5 volts D. 6.0 volts

Last Answer : Answer: B

Description : Four lamps are connected in parallel in a single circuit. If one of the lamp burns out, the others will _____________. A. all go out B. become dimmer C. burn with their original intensities D. become brighter

Last Answer : Answer: C

Description : what is equivalent resistance when four 4 Ohm resistors are connected in i) series ii) parallel

Last Answer : equivalent resistance

Description : When four resistances of 2W 1W; 5W 2W; 10W 5W and 15W 10 W are connected in parallel, the greatest power is absorbed by • 2 W, 1 W • 5 W, 2 W • 10 W, 5W • 15 W, 10 W

Last Answer : When four resistances of 2W 1W; 5W 2W; 10W 5W and 15W 10 W are connected in parallel, the greatest power is absorbed by 2 W, 1 W

Description : Consider a circuit with four 10 Ω resistors connected in parallel and the current flowing through the circuit is 5 A. What will be the current if the above 4 resistors are connected in parallel? A) 5 A B) 50 A C) 500 A D) None of these

Last Answer : Consider a circuit with four 10 Ω resistors connected in parallel and the current flowing through the circuit is 5 A. What will be the current if the above 4 resistors are connected in parallel? A) 5 A B) 50 A C) 500 A D) None of these

Description : The number of parallel paths in armature winding of four pole wave winding connected dc machine having 22 coil sides is (1) 4 (2) 22 (3) 2 (4) 11 

Last Answer : Ans- Option (3) because wave winding always have 2 parallel paths

Description : Four identical resistors are first connected in parallel and then in series. The resultant resistance of the first combination to the second will be

Last Answer : Four identical resistors are first connected in parallel and then in series. The resultant resistance of the first combination to the second will be  1 / 16 times.

Description : This refers to a four-arm ac bridge used for measuring inductance against a standard capacitance.

Last Answer : Maxwell Bridge

Description : Two bulbs when connected in parallel to a source take 60 W each, the power consumed, when they are connected in series with the same source is

Last Answer : Two bulbs when connected in parallel to a source take 60 W each, the power consumed, when they are connected in series ... W B. 30 W C. 60 W D. 120 W

Description : Out of five resistance of `ROmega` each 3 are connected in parallel and are joined to the rest 2 in series. Find the resultant resistance.

Last Answer : Out of five resistance of `ROmega` each 3 are connected in parallel and are joined to the rest 2 in series. Find ... `(7//8)ROmega` D. `(8//7)ROmega`

Description : If two electrical loads are connected in parallel with each other and each load draw 6 amps what is the current of the circuit?

Last Answer : 12 Amperes is.

Description : If an electrical heater has three heating elements connected in parallel why does each element have its own fusible link and limit switch?

Last Answer : What is the answer ?

Description : Two 100 watt light bulbs are connected in parallel across a 100 volt power supply. The total power developed in the circuit is _______________. A. 200 watts B. 100 watts C. 50 watts D. equal to the product of the amperes times the voltage in each branch

Last Answer : Answer: A

Description : Which of the following statements is true if a 100 watt lamp and a 75 watt lamp are connected in parallel across a 100 volt power supply? A. The 75 watt lamp will draw as much current as the 100 ... Current flow will be the same across each lamp. D. The 75 watt lamp will have a higher resistance.

Last Answer : Answer: D

Description : For two springs connected in parallel, net force is equal to the sum of force in each spring. a) True b) False

Last Answer : a) True

Description : If the capacitors are connected in parallel, then the potential difference across each capacitor is A. same B. different C. zero D. infinite

Last Answer : same

Description : Two identical pumps, each capable of delivering 0.2 cumec, against a head of 30 m, are connected in parallel. The resulting discharge is : a) 0.4 cumec against a head of 30 m b) 0.4 cumec against a head of 60 m c) 0.2 cumec against a head of 30 m d) 0.2 cumec against a head of 60 m

Last Answer : a) 0.4 cumec against a head of 30 m