In a TDR system connected for addition in what direction  will the TDR rotor field turn when the TX rotor to which it is  connected turns counterclockwise?

1 Answer

Answer :

Clockwise.

Related questions

Description : Loss of or weak residual magnetism in an alternator or generator can be corrected for by _________________. A. running the rotor in the opposite direction for 5 minutes B. allowing the generator ... rheostat fully counterclockwise D. using a storage battery or battery charger to 'flash' the field

Last Answer : Answer: D

Description : What connections in a TDR system are reversed to set up the system for addition?

Last Answer : . The R1 and R3 leads between the TDR rotor and the TX to which it is connected.

Description : If an ac voltmeter is connected between the S2 and S3 windings on a TX, at what two rotor positions should the voltmeter read maximum voltage?

Last Answer : . 150º and 330º

Description : In a TDX system when does the TR rotor follow the TX rotor exactly?

Last Answer : . When the TDX rotor is on 0º.

Description : In a TDX system with standard synchro connections, the TX rotor is at 120º and the TDX rotor is at 40º. What position will the TR indicate?

Last Answer : . 80º.

Description : What is the angular position of a TX rotor when it is

Last Answer : The S1 and S3 leads are reversed between the TX and the TDX, and the R1 and R3 leads are reversed between the TDX rotor and the TR.

Description : Other than their physical differences, what is the major difference between a TDX and a TDR?

Last Answer : Their application: a TDX has one electrical and one mechanical input with an electrical output.

Description : What is the main advantage of using a time-domain reflectometer (tdr) to test a transmission line?

Last Answer : Tdr will indicate the nature of and the distance to or location of any faults.

Description : What rotates in a counterclockwise direction around an eye?

Last Answer : Feel Free to Answer

Description : All chiral D-sugars rotate plane-polarized light : (a) clockwise (b) counterclockwise (c) +20.0° (d) in a direction that cannot be predicted but must be determined experimentally

Last Answer : in a direction that cannot be predicted but must be determined experimentally

Description : The air around a high pressure area circulates: w) clockwise in the Northern Hemisphere x) counterclockwise in the Northern Hemisphere y) clockwise in the Southern Hemisphere z) in either direction regardless of hemisphere

Last Answer : ANSWER: W -- CLOCKWISE IN THE NORTHERN HEMISPHERE 

Description : The synchronous speed of an induction motor is the ________. A. speed at which the rotor turns B. speed of the rotating field C. frequency of the rotor current D. slip in per cent of rotor RPM

Last Answer : Answer: B

Description : For a DC motor, what major component in addition to the field winding and the armature winding is necessary? w) a commutator x) a stator y) a battery z) a rotor

Last Answer : ANSWER: W -- A COMMUTATOR

Description : The speed of the rotor is always somewhat less than the speed of the rotating field. What is the difference called?

Last Answer : Slip.

Description : The rotor of a synchronous motor operates in synchronism with the rotating field because ______________. A. of the amortisseur windings B. the rotor is magnetically locked into step with the ... field strength varies directly with rotor slip D. the stator flux rotates in the opposite direction

Last Answer : Answer: B

Description : A synchronous motor maintains synchronism with the rotating field because _____________. A. field strength varies directly with rotor slip B. DC current applied to the rotor coils causes the rotor ... the flux created by the excitation current D. the stator flux rotates in the opposite direction

Last Answer : Answer: B

Description : What is the direction of rotation of rotor with respect to the rotating magnetic field?

Last Answer : Answer: Rotating Magnetic Field is set up when 3 phase ac supply is provided to the stator windings of the induction motor. Rotating Magnetic Field rotates at synchronous speed. Rotor rotates in the direction of the rotating magnetic field

Description : If stator field is rotating in clockwise direction rotor rotates in (A) any direction (B) cannot predict (C) anticlockwise (D) clockwise 

Last Answer : If stator field is rotating in clockwise direction rotor rotates in clockwise 

Description : The instruction “ORBIT” from ATC means that the aircraft should: a. Carry out a go around b. Continue with 360 degree turns c. Carry out one 360 degree turn only d. Reverse the direction of the turn

Last Answer : c. Carry out one 360 degree turn only

Description : The instruction “ORBIT” from ATC means that the aircraft should: a. Carry out a go around b. Continue with 360 degree turns c. Carry out one 360 degree turn only d. Reverse the direction of the turn

Last Answer : c. Carry out one 360 degree turn only

Description : Explain the working of TDR along with its symbol and characteristics. 

Last Answer : TDR are also called as thermistors. Thermally sensitive materials are used to manufacture thermistors. Depending on the temperature co- efficient of resistance value thermistors are classified as ... used when a drastic change in resistance is required at specific temperature. RαT

Description : Time Domain Reflectometry (TDR)

Last Answer : Time Domain Reflectometry (TDR) TDR is a application of pulse technique and it is a echo technique. In this technique we observe and analyses  the reflected ... determine the length of the transmission line. This is easy and inexpensive technique.

Description : A square coil of edge I having n turns carries a curent i. it is kept on a smooth horizontal plate. A uniform magnetic field B exists in a direction p

Last Answer : A square coil of edge I having n turns carries a curent i. it is kept on a smooth horizontal plate. A uniform ... . `(Mg)/(4niL)` D. `(2Mg)/(niL)`

Description : The frequency output of an operating alternator is controlled by the _____________. A. relative speed of the rotor poles B. number of turns of wire in the armature coil C. strength of the magnets used D. output voltage

Last Answer : Answer: A

Description : Which parameter indicates the rotor short-circuited turns (Not involving earthfault)? 

Last Answer : Vibration increases.  

Description : How long before the phrases clockwise and counterclockwise will disappear?

Last Answer : Analog clocks and watches are still in common enough use, that I think the terms will persevere-especially given the fact that they are used as references for other activities (such as the diagrams listing ... grandchildren that are fairly young, don't you? Aren't kids still taught how to tell time?

Description : Why are horse races always run counterclockwise?

Last Answer : answer:maybe they are just run left to right, but in a circle. Edit: aren’t most races counterclockwise?

Description : In a CAD package, mirror image of a 2D point P (5, 10) is to be obtained about a line whichpasses through the origin and makes an angle of 45° counterclockwise with the X-axis. The coordinates of the transformed point will be a.(7.5, 5) b.(10, 5) c.(7.5, -5) d.(10, -5)

Last Answer : b.(10, 5)

Description : Should you stir mincemeat clockwise or counterclockwise?

Last Answer : Clockwise for good luck.

Description : In order to decrease the resistance of the 50K pot located at '21Q/R' shown in the illustration, the wiper of the actual component must be moved ____________. EL-0099 A. to the left B. to the right C. clockwise D. counterclockwise

Last Answer : Answer: D

Description : What should a voltmeter read when a TX is set on coarse zero?

Last Answer : Approximately 37 volts.

Description : How do the CX and CDX differ from the TX and TDX?

Last Answer : The CX and CDX have higher impedance windings

Description : In the right-hand rule for propagation, the thumb points in the direction of the E field and the forefinger points in the direction of the H field. In what direction does the middle finger point?

Last Answer : Direction of wave propagation.

Description : What will be the effect upon an electron traveling in the opposite direction to the lines of force in an electrostatic field?

Last Answer : The electron will be accelerated.

Description : The direction of what field is used to designate the polarization of a wave?

Last Answer : Electric (E) field.

Description : What is the amplitude and voltage induced into the rotor when the CX is turned 90º while the CT remains on electrical zero?

Last Answer : The voltage is maximum and in phase with the ac excitation voltage to the CX.

Description : When a CT is on electrical zero, what is the relationship between its rotor and the S2 winding?

Last Answer : They are perpendicular to each other.

Description : What three things prevent a CT rotor from turning when voltages are applied to its stator windings?

Last Answer : The rotor is specially wound, it is never connected to an ac supply, and its output is always applied to a high-impedance load.

Description : What is the name given to the angle through which a transmitters rotor is mechanically rotated?

Last Answer : Signal.

Description : On the synchro schematic symbol, what indicates the angular displacement of the rotor?

Last Answer : . The position of the arrow.

Description : Which gyro rotor in figure 3-6, view (A) view (B) view (C), will have the greatest rigidity if all are rotated at the same speed?

Last Answer : C.

Description : In a two-rotor system, torsional vibration occurs only if the rotors are moving in the ______ direction. (A) same (B) opposite (C) either same or opposite (D) none of the above

Last Answer : (B) opposite

Description : In a two-rotor system, torsional vibration occurs only if the rotors are moving in the ______ direction. A. same B. opposite C. either same or opposite D. none of the above

Last Answer : B. opposite

Description : Which of the following statements is/are true? A. Torsional vibrations do not occur in a three rotor system, if rotors rotate in same direction B. Shaft vibrates with maximum frequency when rotors ... C. Zero node behavior is observed in rotors rotating in opposite direction D. All of the above

Last Answer : A. Torsional vibrations do not occur in a three rotor system, if rotors rotate in same direction

Description : Which of the following statements is/are true? A) Torsional vibrations do not occur in a three rotor system, if rotors rotate in same direction B) Shaft vibrates with maximum frequency when rotors ... C) Zero node behavior is observed in rotors rotating in opposite direction D) All of the above

Last Answer : A) Torsional vibrations do not occur in a three rotor system, if rotors rotate in same direction

Description : Which of the following statements is/are true? a. Torsional vibrations do not occur in a three rotor system, if rotors rotate in same direction b. Shaft vibrates with maximum frequency when rotors ... c. Zero node behavior is observed in rotors rotating in opposite direction d. All of the above

Last Answer : a. Torsional vibrations do not occur in a three rotor system, if rotors rotate in same direction

Description : An aqueous solution turns red litmus solution blue. Excess addition of which of the following solution would reverse the change ? -SST 10th

Last Answer : D - The aqueous solution is a base as it turns red litmus solution blue. An acidic solution such as hydrochloric acid would reverse the change. In contrast, hydrochloric acid would turn blue ... not be able to reverse the change. These substances would only change red litmus solution to blue.

Description : An aqueous solution turns red litmus solution blue. Excess addition of which of the following solution would reverse the change? (a) Baking powder (b) Lime (c) Ammonium hydroxide solution (d) Hydrochloric acid

Last Answer : (d) Hydrochloric acid

Description : The speed of a squirrel-cage, multi-speed, induction motor, as used aboard ship, is varied by changing the __________. A. number of connected poles in the stator B. frequency to the motor C. excitation voltage D. resistance of the rotor circuit

Last Answer : Answer: A

Description : The locked rotor current in a 3-phase, star connected 15 , kW 4 , pole 230 V , 50 Hz induction motor at rated conditions is 50 A. Neglecting losses and magnetizing current, the approximate locked rotor line current drawn when the motor ... Hz supply is  (A) 58.5 A (B) 45.0 A (C) 42.7 A (D) 55.6 A

Last Answer : The locked rotor current in a 3-phase, star connected 15 , kW 4 , pole 230 V , 50 Hz induction motor at rated conditions is 50 A. Neglecting losses and magnetizing current, the approximate locked rotor line current drawn when the motor is connected to a 236 , V 57 Hz supply is 45.0 A