Besides eliminating the emitter-base battery, what other advantages can different biasing methods offer?

Besides eliminating the emitter-base battery, what other  advantages can different biasing methods offer?
by

1 Answer

Answer :

Compensation for slight variations in transistor characteristics  and changes in transistor conduction because of temperature  variations.
by

Related questions

the voltage drop across RS and R1 determines the amount of base-emitter ____ for Q1.

Description : the voltage drop across RS and R1 determines the amount of base-emitter ____ for Q1.

Last Answer : Bias.

In the illustration, the small battery and Rb are in the circuit to apply ________. EL-0022 A. forward bias to the emitter-base B. reverse bias to the emitter-base C. a 'reference charge' on the input capacitor D. a buffer between the input ground and the emitter ground

Description : In the illustration, the small battery and Rb are in the circuit to apply ________. EL-0022 A. forward bias to the emitter-base B. reverse bias to the emitter-base C. a 'reference charge' on the input capacitor D. a buffer between the input ground and the emitter ground

Last Answer : Answer: A

In the illustration, the large battery and R(L) are in the circuit to ________. EL-0022 A. forward bias the emitter-base B. reverse bias the emitter-base C. forward bias the emitter/collector D. reverse bias the emitter/collector

Description : In the illustration, the large battery and R(L) are in the circuit to ________. EL-0022 A. forward bias the emitter-base B. reverse bias the emitter-base C. forward bias the emitter/collector D. reverse bias the emitter/collector

Last Answer : Answer: D

Which biasing method iWhich biasing method is the most unstable?

Description : Which biasing method is the most unstable?

Last Answer : Base current bias or fixed bias.

rid-leak biasing in effect rectifies the input ac signal. What feature

Description : rid-leak biasing in effect rectifies the input ac signal. What feature

Last Answer : Unequal charge and discharge paths of the coupling capacitor Cc.

In a circuit using grid-leak biasing, the coupling capacitor (Cc) chargcharge path?

Description : In a circuit using grid-leak biasing, the coupling capacitor (Cc) chargcharge path?

Last Answer : rkg, the cathode to grid resistance.

When a circuit uses cathode biasing, the input signal can cause varia

Description : When a circuit uses cathode biasing, the input signal can cause varia

Last Answer : Through the use of a bypass capacitor

What are the methods of transistor biasing?

Description : What are the methods of transistor biasing?

Last Answer : 1. fixed bias 2.collector to base bias 3. self bias or voltage divider bias 4. emitter bias

List various transistor biasing methods.

Description : List various transistor biasing methods.

Last Answer : Types of biasing methods: i. Base bias (or fixed bias) ii. Base bias with emitter feedback. iii. Base bias with collector feedback iv. Voltage divider bias (or self bias) v. Emitter bias. 

Which of the following statements is wrong for transistor biasing methods:

Description : Which of the following statements is wrong for transistor biasing methods:  1. The base resistor method does not provide stabilization of operating point 2. The biasing with feedback ... than collector feedback method 4.Voltage divider bias is widely used because it has stable operating point

Last Answer : Which of the following statements is wrong for transistor biasing methods:  1. The base resistor method does not provide stabilization of operating point 2. The biasing with feedback ... than collector feedback method 4.Voltage divider bias is widely used because it has stable operating point 

Explain with circuit diagram, voltage divider biasing method and state its two advantages.

Description : Explain with circuit diagram, voltage divider biasing method and state its two advantages.

Last Answer : a)Here R1 and R2 forms voltage divider biasing arrangement. b)voltage drop across R2 ,forward biases the base emitter junction. c)so base current flows and hence collector ... Operating point stabilized against shift in temperature. · Operating point is almost independent of β variation

Draw circuit diagram of voltage divider biasing list two advantages of voltage divider biasing of BJT.

Description : Draw circuit diagram of voltage divider biasing list two advantages of voltage divider biasing of BJT.

Last Answer : Two advantages of voltage divider biasing of BJT. 1. It is very simple method of transistor biasing. 2. The biasing conditions can be very easily set. 3. there is no loading of ... 5. The resistor RE introduces a negative feedback. So all the advantages of negative feedback are obtained. 

What is the input current in the common-emitter circuit?

Description : What is the input current in the common-emitter circuit?

Last Answer : Base current (IB).

What is the polarity of the first alternation of the tank circuit in an emitter-loaded npn pulsed oscillator?

Description : What is the polarity of the first alternation of the tank circuit in an emitter-loaded npn pulsed oscillator?

Last Answer : Negative

How is the output signal developed in the common-emitter detector?

Description : How is the output signal developed in the common-emitter detector?

Last Answer : By the collector current flow through R4.

Which junction of the transistor in the common-emitter detector detects the modulation envelope?

Description : Which junction of the transistor in the common-emitter detector detects the modulation envelope?

Last Answer : Emitter-base junction

What causes the change in collector current in an emitter injection modulator?

Description : What causes the change in collector current in an emitter injection modulator?

Last Answer : Gain is varied by changing the voltage on the emitter.

Is the base region much thinner or much wider than the collector and the emitter regions?

Description : Is the base region much thinner or much wider than the collector and the emitter regions?

Last Answer : yes its thinnerMost of the free electrons that have entered the base do notrecombine with holes because the base is very thin.

The diagram shown in the illustartion represents a/an _____________. EL-0022 A. magnectic amplifier B. common base amplifier C. common collector amplifier D. common emitter amplifier

Description : The diagram shown in the illustartion represents a/an _____________. EL-0022 A. magnectic amplifier B. common base amplifier C. common collector amplifier D. common emitter amplifier

Last Answer : Answer: D

In the illustrated circuit, the amplifier is connected in what basic configuration? EL-0022 A. common base B. reverse bias, negative feedback C. common emitter D. common collector

Description : In the illustrated circuit, the amplifier is connected in what basic configuration? EL-0022 A. common base B. reverse bias, negative feedback C. common emitter D. common collector

Last Answer : Answer: C

In the illustrated circuit, the amplifier is connected in what basic configuration? EL-0045 A. common emitter B. common collector C. darlington paired, capacitor coupled D. common base

Description : In the illustrated circuit, the amplifier is connected in what basic configuration? EL-0045 A. common emitter B. common collector C. darlington paired, capacitor coupled D. common base

Last Answer : Answer: D

As shown in the illustration, which of the elements listed does the line 'B' represent in the basic schematic symbol of a PNP transistor? EL-0068 A. Base B. Emitter C. Cathode D. Collector

Description : As shown in the illustration, which of the elements listed does the line 'B' represent in the basic schematic symbol of a PNP transistor? EL-0068 A. Base B. Emitter C. Cathode D. Collector

Last Answer : Answer: D

Which of the following actions can be carried out in order to prevent thermal runaway in a transistor? A. Increase the current through the collector-base junction. B. Install a heat sink. C. Shift the 'Q' point to increase collector current. D. Increase the potential difference between the emitter and the base.

Description : Which of the following actions can be carried out in order to prevent thermal runaway in a transistor? A. Increase the current through the collector-base junction. B. Install a heat sink. ... point to increase collector current. D. Increase the potential difference between the emitter and the base.

Last Answer : Answer: B

The device in figure 'B' shown in the illustration will conduct when the ____________. EL-0067 A. base-emitter is forward biased and the collector-base is reverse biased B. anode-cathode is forward biased and the cathode-gate is forward biased C. source-gate is forward biased and the gate-drain is reversed biased D. terminal 1-2 is forward biased and the emitter-terminal 1 is reverse biased

Description : The device in figure 'B' shown in the illustration will conduct when the ____________. EL-0067 A. base-emitter is forward biased and the collector-base is reverse biased B. anode-cathode is forward ... is reversed biased D. terminal 1-2 is forward biased and the emitter-terminal 1 is reverse biased

Last Answer : Answer: B

The leads of the device in figure 'B' shown in the illustration are named _________. EL-0065 A. source, gate and drain B. emitter, base and collector C. emitter, base 1 and base 2 D. anode, cathode and gate

Description : The leads of the device in figure 'B' shown in the illustration are named _________. EL-0065 A. source, gate and drain B. emitter, base and collector C. emitter, base 1 and base 2 D. anode, cathode and gate

Last Answer : Answer: A

Leads on the device in figure 'B' shown in the illustration are named ____________. EL-0067 A. source, gate and drain B. emitter, base and collector C. emitter, base 1 and base 2 D. anode, cathode and gate

Description : Leads on the device in figure 'B' shown in the illustration are named ____________. EL-0067 A. source, gate and drain B. emitter, base and collector C. emitter, base 1 and base 2 D. anode, cathode and gate

Last Answer : Answer: D

Which of the following statements correctly applies to transistors? A. NDN and PNP are the two basic types of transistors. B. The three terminals are called the emitter, base, and collector. C. The emitter separates the base and collector. D. The collector separates the emitter and base.

Description : Which of the following statements correctly applies to transistors? A. NDN and PNP are the two basic types of transistors. B. The three terminals are called the emitter, base, and collector. C. The emitter separates the base and collector. D. The collector separates the emitter and base.

Last Answer : Answer: B

The leads of the device in figure 'A' shown in the illustration are named the _______________. EL-0065 A. source, gate and drain B. emitter, base and collector C. emitter, base 1 and base 2 D. anode, cathode and gate

Description : The leads of the device in figure 'A' shown in the illustration are named the _______________. EL-0065 A. source, gate and drain B. emitter, base and collector C. emitter, base 1 and base 2 D. anode, cathode and gate

Last Answer : Answer: C

Under ideal conditions, the collector current is (a) Equal to base current (b) Nearly equal to emitter current (c) Less than base current (d) always zero

Description : Under ideal conditions, the collector current is (a) Equal to base current (b) Nearly equal to emitter current (c) Less than base current (d) always zero

Last Answer : (b) Nearly equal to emitter current

In a transistor, the conventional current flows from base to emitter. The transistor is (a) NPN (b) PNP (c) FET (d) None of these

Description : In a transistor, the conventional current flows from base to emitter. The transistor is (a) NPN (b) PNP (c) FET (d) None of these

Last Answer : (a) NPN

A part of transistor which is heavily doped to produce large number of majority carriers is (a) Emitter (b) Base (c) Collector (d) any of above

Description : A part of transistor which is heavily doped to produce large number of majority carriers is (a) Emitter (b) Base (c) Collector (d) any of above

Last Answer : (a) Emitter

In the transistor schematic symbol, the arrow ________ (a) located on emitter (b) located on base (c) located on collector (d) points from north to south

Description : In the transistor schematic symbol, the arrow ________ (a) located on emitter (b) located on base (c) located on collector (d) points from north to south

Last Answer : a) located on emitter

The operation of a transistor requires ______ (a) Emitter is heated (b) base is heated (c) collector be heated (d) none of above

Description : The operation of a transistor requires ______ (a) Emitter is heated (b) base is heated (c) collector be heated (d) none of above

Last Answer : (d) none of above

In n-p-n transistor, p works as ________ (a) Collector (b) emitter (c) base (d) any of above

Description : In n-p-n transistor, p works as ________ (a) Collector (b) emitter (c) base (d) any of above

Last Answer : c) base

The central region of transistor is called (a) Base (b) emitter (c) collector (d) neutral

Description : The central region of transistor is called (a) Base (b) emitter (c) collector (d) neutral

Last Answer : (b) emitter

The common-emitter transistor circuit can amplify a small current signal because a small change in the signal current produces one of the following. Does the change in signal produce a large change in the: w) emitter-base voltage x) base current y) collector current z) collector voltage

Description : The common-emitter transistor circuit can amplify a small current signal because a small change in the signal current produces one of the following. Does the change in signal produce a large change in the: w) emitter-base voltage x) base current y) collector current z) collector voltage

Last Answer : ANSWER: Y -- COLLECTOR CURRENT

What are the three elements of a bipolar transistor? Are they the: w) grid, plate, cathode x) suppressor, deflector, target y) energizer, controller, terminus z) emitter, base, collector

Description : What are the three elements of a bipolar transistor? Are they the: w) grid, plate, cathode x) suppressor, deflector, target y) energizer, controller, terminus z) emitter, base, collector

Last Answer : ANSWER: Z -- EMITTER, BASE, COLLECTOR

If the base current of a BJT is 250 µA and emitter current is 15 mA, then the common base current gain will be

Description :  If the base current of a BJT is 250 µA and emitter current is 15 mA, then the common base current gain will be A) 0.98 B) 0.41 C) 59 D) 55  

Last Answer :  If the base current of a BJT is 250 µA and emitter current is 15 mA, then the common base current gain will be 0.98 

For the active mode BJT operation (A) Emitter Base Junction is Forward Biased and Collector

Description : For the active mode BJT operation (A) Emitter Base Junction is Forward Biased and Collector Base Junction is Forward Biased (B) Emitter Base Junction is Reverse Biased and Collector Base Junction ... Biased (D) Emitter Base Junction is Reverse Biased and Collector Base Junction is Forward Biased

Last Answer : For the active mode BJT operation Emitter Base Junction is Forward Biased and Collector Base Junction is Reverse Biased.

Besides presenting a neat appearance and supporting each other, what is the other purpose for lacing conductors?

Description : Besides presenting a neat appearance and supporting each other, what is the other purpose for lacing conductors?

Last Answer : To aid in tracing the conductors when alterations or repairs are required.

Besides tungsten, what other materials are used for cathodes in vacu

Description : Besides tungsten, what other materials are used for cathodes in vacu

Last Answer : Thoriated-tungsten and oxide-coated metals.

Is there really other methods to kill cancer besides the dreaded chemo?

Description : Is there really other methods to kill cancer besides the dreaded chemo?

Last Answer : I have heard of pinpoint radiation treatments for hard to reach areas of the body. Like the brain. Sorry that I don’t have a link.

Besides grinding what are some other methods used to thread ball screws?

Description : Besides grinding what are some other methods used to thread ball screws?

Last Answer : Besides grinding, another method is recirculating ball nut and shaft assembly. This method rolled thread ball screws cost less than ground ball screws but deliver virtually the same accuracy and performance You used ... to have a die with the correct width and pitch (the angle of the threading).

How could I have asked this question without biasing the answers?

Description : How could I have asked this question without biasing the answers?

Last Answer : There are closed (yes/no) questions, open questions and leading questions. Closed and leading questions are safe because you can control and predict the reactions and outcomes. Open questions are risky ... to run that risk. Unfortunately that means you didn't get the honest reactions you wanted.

What is Biasing ?

Description : What is Biasing ?

Last Answer : : Biasing is the external DC supply that is given to activate a transistor.

How many types of biasing ?

Description : How many types of biasing ?

Last Answer : : There are two types of biasing: 1) forward biasing 2) reverse biasing.

In the illustrated circuit, one advantage of the capacitor coupling over direct coupling is ____________. EL-0048 A. as the frequency decreased the capacitive reactance (Xc) increases B. the amplifier becomes more efficient at lower capacitance. C. the arrangement allows the coupling of the signal while it isolates the biasing of each stage. D. good frequency response.

Description : In the illustrated circuit, one advantage of the capacitor coupling over direct coupling is ____________. EL-0048 A. as the frequency decreased the capacitive reactance (Xc) increases B. the amplifier becomes ... of the signal while it isolates the biasing of each stage. D. good frequency response.

Last Answer : Answer: C

RC time constant characteristics, as shown in the illustration, are important in _____________. EL-0086 A. bridge rectifiers for alternator excitation B. timing and pulse shaping circuits C. transistor power amplifier biasing D. motor controller overload protection

Description : RC time constant characteristics, as shown in the illustration, are important in _____________. EL-0086 A. bridge rectifiers for alternator excitation B. timing and pulse shaping circuits C. transistor power amplifier biasing D. motor controller overload protection

Last Answer : Answer: B

What is biasing?

Description : What is biasing?

Last Answer : To use the transistor in any application it is necessary to provide sufficient voltage and current to operate the transistor. This is called biasing.