In a weighted-resistor digital-to-analog converter with 8-bit input, if the resistance corresponding to the MSB is 2K, what will be the resistance corresponding to the LSB? 

(a) 250 Ω (d) 512 KΩ (c) 256 KΩ (d) 25.5 Ω

1 Answer

Answer :

In a weighted-resistor digital-to-analog converter with 8-bit input, if the resistance corresponding to the MSB is 2K, what will be the resistance corresponding to the LSB? 

(a) 250 Ω (d) 512 KΩ (c) 256 KΩ (d) 25.5 Ω

Related questions

Description : A weighted resistor digital to analog converter using N bits requires a total of (A) N precision resistors. (B) 2N precision resistors. (C) N + 1 precision resistors. (D) N – 1 precision resistors.

Last Answer : (A) N precision resistors.

Description : In a 5 bit weighted resistor D/A converters, the resistor value corresponding to LSB is 40 kΩ, and the resistor value corresponding to MSB will be (A) 0.4 kΩ (B) 3 kΩ (C) 2.8 kΩ (D) 2.5 kΩ

Last Answer : In a 5 bit weighted resistor D/A converters, the resistor value corresponding to LSB is 40 kΩ, and the resistor value corresponding to MSB will be 2.5 kΩ 

Description : The number of comparators required in a 3-bit comparator type analog to digital converter is  A) 2 B) 3 C) 7 D) 8 

Last Answer : Number of comparators =2^n -1= 2^3 -1=7

Description : A 4-bit R/2R digital-to-analog (DAC) converter has a reference of 5 volts. What is the analog output for the input code 1010:  (1) 0.3125 V (2) 3.125 V (3) 0.78125 V (4) –3.125 V

Last Answer : 3.125V

Description : In D/A converter, the resolution required is 50mv and the total maximum input is 10v. The number of bits required is   (A) 7 (B) 8 (C) 9 (D) 200

Last Answer : In D/A converter, the resolution required is 50mv and the total maximum input is 10v. The number of  bits required is 8 

Description : Choose the correct statement  (a) Digital multimeters are built using current measuring elements, while analog multimeters are built using voltage measuring units (b) Digital multimeters are built ... measuring units (d) Both digital and analog multimeters are built using current measuring units

Last Answer : Choose the correct statement  (a) Digital multimeters are built using current measuring elements, while analog multimeters are built using voltage measuring units (b) Digital multimeters are built ... measuring units (d) Both digital and analog multimeters are built using current measuring units

Description : Which is the fastest type of analogue to digital converter?

Last Answer : Flash converter is the fastest type of analogue to digital converter (ADC).

Description : Which are the types of important ideas to notice about these odometer readings: a. The MSB is the sign bit .O for a +sign and 1 for a— sign b. The negative number represent the 2’s complement of the positive number c. Both d. __ Allof these

Last Answer : c. Both

Description : What is a Digital-to-Analog Converter (DAC) in Arduino?

Last Answer : A Digital-to-Analog Converter (DAC) in Arduino is a component that converts digital signals into analog signals, such as to control the output voltage to a motor or a speaker.

Description : What is an Analog-to-Digital Converter (ADC) in Arduino?

Last Answer : An Analog-to-Digital Converter (ADC) in Arduino is a component that converts analog signals, such as temperature or light, into digital signals that can be processed by the microcontroller.

Description : In a synchronous modem, the digital-to-analog converter transmits signal to the a. equilizer b. modulator c. demodulator d. terminal e. none of aobve

Last Answer : equilizer

Description : It is the ratio of the largest possible magnitude to the smallest possible magnitude that can be decoded by the digital-to-analog converter in the receiver.

Last Answer : Dynamic range

Description : The conversation speed of an analog to digital converter is maximum with the following technique. (A) Dual slope AD converter. (B) Serial comparator AD converter. (C) Successive approximation AD converter. (D) Parallel comparator AD converter.

Last Answer : (D) Parallel comparator AD converter.

Description : A digital voltmeter uses an A/D converter which needs a start pulse, uses an analog comparator and has a relatively fixed conversion time independent of the applied voltage. The A/D ... Successive Approximation Converter .b) Digital Ramp Converter c) Digital Slope Converter d) All the above

Last Answer : A digital voltmeter uses an A/D converter which needs a start pulse, uses an analog comparator and has a relatively fixed conversion time independent of the applied voltage. The A/D converter is : -  Successive Approximation Converter 

Description : What is Analog to Digital Converter (ADC) ?

Last Answer : Analog to Digital Converter (ADC)  Analog quantity may be voltage, temperature, sound, speed, audio etc. it is information or signal. ... digital form), digital speedometer (converts analog speed into digital form) etc.

Description : Digital to Analog Converter (DAC)

Last Answer : Digital to Analog Converter (DAC) Digital means binary (1 0) and 1 and 0 may be true and false or on and off or high and low. Analog means continuous signal or information ... wave. Phase Shift Keying (PSK) is transmit digital data by changing the phase of carrier wave.

Description : An analog voltmeter has a sensitivity of 10kΩ/volt. The galvanometer used in constructing the instrument will produce a full scale deflection when the current passed through it is  (a) 10 mA (b) 20 mA (c) 50 mA (d) 100 μA

Last Answer : An analog voltmeter has a sensitivity of 10kΩ/volt. The galvanometer used in constructing the instrument will produce a full scale deflection when the current passed through it is 100 μA

Description : The first stage of a two-stage amplifier has a voltage gain of 10, a 600 Ω input resistor, a 1600Ω equivalent noise resistance and 27kΩ output resistor. For the second stage, these values are 25, 81kΩ, 19kΩ, and 1MΩ, ... this two stage amplifier. A. 2,518 kΩ B. 2,518 Ω C. 251.8 Ω D. 12,518 Ω

Last Answer : B. 2,518 Ω

Description : Number of comparators required for an 8 bit flash ADC is: (1) 8 (2) 16 (3) 255 (4) 256

Last Answer : Number of comparators required for an 8 bit flash ADC is: 255

Description : Write down the drawback of weighted D/A converter.

Last Answer : The main disadvantage of binary weighted D/A converter is the requirement of wide range of resister values.As the length of the binary word is increased .the range of resister values needed also increases.

Description : A technique used by codes to convert an analog signal into a digital bit stream is known as A) Pulse code modulation B) Pulse stretcher C) Query processing D) Queue management

Last Answer : Answer : A

Description : Which performance parameter is the minimum amount of optical power required to achieve a specific bit-error rate (BER) in digital systems or a given signal-to-noise ratio (SNR) in analog systems?

Last Answer : Receiver sensitivity.

Description : A technique used by codes to convert an analog signal into a digital bit stream is known as a. Pulse code modulation b. Pulse stretcher c. Query processing d. Queue management

Last Answer : a. Pulse code modulation

Description : A technique used by codes to convert an analog signal into a digital bit stream is known as a. Pulse code modulation b. Pulse stretcher c. Query processing d. Queue management

Last Answer : a. Pulse code modulation

Description : A technique used by codes to convert an analog signal into a digital bit stream is known as a. Pulse code modulation b. Pulse stretcher c. Query processing d. Queue management

Last Answer : a. Pulse code modulation

Description : An eight bit digital data 10101100 is fed to an ADC. The reference voltage is +10V. The analog output voltage will be:  (1) 1.05V (2) 6.74V (3) 10.10V (4) 5.15V

Last Answer : An eight bit digital data 10101100 is fed to an ADC. The reference voltage is +10V. The analog output voltage will be: 6.74V.

Description : The computer that can input analog signals and return result in digital form A) Analog Computers B) Digital Computers C) Hybrid Computers D) Mainframe Computers

Last Answer : Answer : C

Description : In analog computer A) Input is first converted to digital form B) Input is never converted to digital form C) Output is displayed in digital form D) All of the above

Last Answer : Answer : B

Description : _______ is an input device that converts analog information into digital form. A. Plotter B. Track Ball C. Light Pen D. Digitizer

Last Answer : D. Digitizer

Description : In analog computer a. Input is first converted to digital form b. Input is never converted to digital form c. Output is displayed in digital form d. All of above

Last Answer : All of above

Description : In analog computer a. Input is first converted to digital form b. Input is never converted to digital form c. Output is displayed in digital form d. All of above

Last Answer : b. Input is never converted to digital form

Description : In analog computer a. Input is first converted to digital form b. Input is never converted to digital form c. Output is displayed in digital form d. All of above

Last Answer : b. Input is never converted to digital form

Description : In an R-2R ladder D/A converter, the input resistance is  1. Not same for all digital inputs 2. R for each input 3. 2R for each input 4. 3R for each input 

Last Answer : In an R-2R ladder D/A converter, the input resistance is 3R for each input 

Description : The 'E/P converter' shown in the illustration receives a _____________. EL-0096 A. steady pressure signal and produces a programmed electrical output B. variable electrical signal ... an inverse temperature correction D. variable pressure signal and produces a corresponding electrical output

Last Answer : Answer: B

Description : The Excess-3 decimal code is a self-complementing code because (A) The binary sum of a code and its 9’s complement is equal to 9. (B) It is a weighted code. (C) Complement can be generated by inverting each bit pattern. (D) The binary sum of a code and its 10’s complement is equal to 9.

Last Answer : Answer: A, C

Description : How do I hook up my television analog converter?

Last Answer : The 3 cords you hooked up, I assume are your A/V cords (red, white, yellow). Make sure your TV is turned to your A/V input.

Description : When the pointer of an analog ohmmeter reads close to zero, the resistor being measured is? A.overheated B.shorted C.open D.reversed

Last Answer : When the pointer of an analog ohmmeter reads close to zero, the resistor being measured is? A.overheated B.shorted C.open D.reversed

Description : Pointer of an analog ohmmeter reading close to zero, indicates the resistor being measured is: A. overheated B. shorted C. open D. reversed

Last Answer : Pointer of an analog ohmmeter reading close to zero, indicates the resistor being measured is: shorted

Description : Which is true for neural networks? a) It has set of nodes and connections b) Each node computes it’s weighted input c) Node could be in excited state or non-excited state d) All of the mentioned

Last Answer : d) All of the mentioned

Description : Which is true for neural networks? a) It has set of nodes and connections b) Each node computes it’s weighted input c) Node could be in excited state or non-excited state d) All of the mentioned

Last Answer : d) All of the mentioned

Description : An artificial neurons receives n inputs x1, x2,...,xn with weights w1,w2,...,wn attached to the input links. The weighted sum ............... is computed to be passed on to a non-linear filter ϕ called activation function to release the output. (A) Σ wi (B) Σ xi (C) Σ wi + Σ xi (D) Σ wi . Σ xi

Last Answer : (D) Σ wi . Σ xi

Description : Suppose a digitized voice channel is made by digitizing 8 kHz bandwidth analog voice signal. It is required to sample the signal at twice the highest frequency (two samples per hertz). What is the bit rate required, if it ... sample requires 8 bits? (A) 32 kbps (B) 64 kbps (C) 128 kbps (D) 256 kbps

Last Answer : (C) 128 kbps

Description : of LSB and MSB In full What ?

Last Answer : LSB = Least Significant Bit MSB = Most Significant Bit

Description : Find the transmitted code if the frame is (MSB) 1101011011 (LSB) and generator polynomial is x4 + x + 1. A. 1101011011 1110 B. 1101011111 1110 C. 1101011011 1111 D. 1101011011

Last Answer : A. 1101011011 1110

Description : What is the output of the following code AL= -28 decimal, BL=59 decimal IMUL BL AX=? , MSB=? a) AX= F98CH, MSB=1. b) AX= 1652, MSB=1. c) BX F9C8H, MSB=1. d) BX= 1652, MSB=1.

Last Answer : a) AX= F98CH, MSB=1.

Description : What are the safeties on MSB?

Last Answer : Circuit breakers, fuses and over current relays are used. The panels are dead front panel, that is, we cannot open the panel for maintenance until we switch off the power to the panel by circuit breaker.

Description : What is MSB and LSB?

Last Answer : LSB is least significant bit and MSB is most significant bit.  Suppose this binary number 1000 here rightmost 0 is the LSB and left most 1 is the MSB.

Description : The percent resolution of an 8 -bit D/A converter is

Last Answer : The percent resolution of an 8 -bit D/A converter is 0.392

Last Answer : An 8 bit converter type A/D converter makes at least 8000conversions/sec. The clock frequency used is 2MHz.