Description : Which of the following materials is not used for transmission and distribution of electrical power ? (a) Copper (b) Aluminium (c) Steel (d) Tungsten
Last Answer : (d) Tungsten
Description : Overhead lines generally use (a) copper conductors (b) all aluminium conductors (c) A.C.S.R. conductors (d) none of these
Last Answer : (c) A.C.S.R. conductors
Description : Distribution lines in India generally use (a) wooden poles (b) R.C.C. poles (c) steel towers (d) none of the above
Last Answer : (b) R.C.C. poles
Description : High voltage transmission lines use (a) suspension insulators (b) pin insulators (c) both (a) and (b) (d) none of the above
Last Answer : (a) suspension insulators
Description : Most of the high voltage transmission lines in India are (a) underground (b) overhead (c) either of the above (d) none of the above
Last Answer : (b) overhead
Description : Which of the following are the constants of the transmission lines ? (a) Resistance (b) Inductance (c) Capacitance (d) All of the above
Last Answer : (d) All of the above
Description : The material generally used for armour of high voltage cables is (a) aluminium (b) steel (c) brass (d) copper
Last Answer : (b) steel
Description : In transmission lines the cross-arms are made of (a) copper (b) wood (c) R.C.C. (d) steel
Last Answer : (d) steel
Description : Which of the following is the demerit of a 'constant voltage transmission system' ? (a) Increase of short-circuit current of the system (b) Availability of steady voltage at all loads at ... of carrying increased power for a given conductor size in case of long-distance heavy power transmission
Last Answer : (a) Increase of short-circuit current of the system
Description : The material commonly used for sheaths of underground cables is (a) lead (b) rubber (c) copper (d) iron
Last Answer : (a) lead
Description : Galvanised steel wire is generally used as (a) stay wire (b) earth wire (c) structural components (d) all of the above
Last Answer : (d) all of the above
Description : The usual spans with R.C.C. poles are (a) 40—50 meters (b) 60—100 meters (c) 80—100 meters (d) 300—500 meters
Last Answer : (c) 80—100 meters
Description : The minimum clearance between the ground and a 220 kV line is about (a) 4.3 m (b) 5.5 m (c) 7.0 m (d) 10.5 m
Last Answer : (c) 7.0 m
Description : The material commonly used for insulation in high voltage cables is (a) lead (b) paper (c) rubber (d) none of the above
Last Answer : (b) paper
Description : Multicore cables generally use (a) square conductors (b) circular conductors (c) rectangular conductors (d) sector-shaped conductors (e) none of the above
Last Answer : (d) sector-shaped conductors
Description : The distributors for residential areas are (a) single phase (b) three-phase three wire (c) three-phase four wire (d) none of the above
Last Answer : (c) three-phase four wire
Description : The voltage of the single phase supply to residential consumers is (a) 110 V (b) 210 V (c) 230 V (d) 400 V
Last Answer : (c) 230 V
Description : Besides a method of trial and error, which of the following methods is employed for solution of network problems in interconnected system ? (a) Circulating current method (b) Thevenin's theorem (c) Superposition of currents (d) Direct application of Kirehhoffs laws (e) All of the above
Last Answer : (e) All of the above
Description : A booster is a (a) series wound generator (b) shunt wound generator (c) synchronous generator (d) none of the above
Last Answer : (a) series wound generator
Description : Which of the following D.C. distribution system is the simplest and lowest in first cost ? (a) Radial system (b) Ring system (c) Inter-connected system (d) None of the above
Last Answer : (a) Radial system
Description : Due to which of the following reasons the cables should not be operated too hot ? (a) The oil may loose its viscosity and it may start drawing off from higher levels (b) Expansion of the ... instability may rise due to the rapid increase of dielectric losses with temperature (e) All of the above
Description : Which of the following methods is used for laying of underground cables ? (a) Direct laying (b) Draw-in-system (c) Solid system (d) All of the above
Description : The operating voltage of extra high tension cables is upto (a) 6.6 kV (b) 11 kV (c) 33 kV (d) 66 kV (e) 132 kV
Last Answer : (d) 66 kV
Description : The operating voltage of supertension cables is up to (a) 3.3 kV (b) 6.6 kV (c) 11 kV (d) 33 kV
Last Answer : (d) 33 kV
Description : The operating voltage of high voltage cables is up to (a)l.lkV (b)3.3kV (c)6.6kV (d)llkV
Last Answer : (d)llkV
Description : The square root of the ratio of line impedance and shunt admittance is called the (a) surge impedance of the line (b) conductance of the line (c) regulation of the line (d) none of the above
Last Answer : (a) surge impedance of the line
Description : The phenomenon qf rise in voltage at the receiving end of the open-circuited or lightly loaded line is called the (a) Seeback effect (b) Ferranti effect (c) Raman effect (d) none of the above
Last Answer : (b) Ferranti effect
Description : 310 km line is considered as (a) a long line (b) a medium line (c) a short line (d) any of the above
Last Answer : (a) a long line
Description : The corona is considerably affected by which of the following ? (a) Size of the conductor (b) Shape of the conductor (c) Surface condition of the conductor (d) All of the above
Description : The wooden poles well impregnated with creosite oil or any preservative compound have life (a) from 2 to 5 years (b) 10 to 15 years (c) 25 to 30 years (d) 60 to 70 years
Last Answer : (c) 25 to 30 years
Description : If variable part of annual cost on account of interest and depreciation on the capital outlay is equal to the annual cost of electrical energy wasted in the conductors, the total annual cost will be minimum and the ... (b) Ohm's law (c) Kirchhoffs law (d) Faraday's law (e) none of the above
Last Answer : (a) Kelvin's law
Description : Overhead system can be designed for operation up to (a) 11 kV (b) 33 kV (c) 66 kV (d) 400 kV
Last Answer : (c) 66 kV
Description : The underground system cannot be operated above (a) 440 V (b) 11 kV (c) 33 kV (d) 66 kV
Description : are the conductors, which connect the consumer's terminals to the distribution (a) Distributors (b) Service mains (c) Feeders (d) None of the above
Last Answer : (b) Service mains
Description : By which of the following systems electric power may be transmitted ? (a) Overhead system (b) Underground system (c) Both (a) and (b) (d) None of the above
Last Answer : (c) Both (a) and (b)
Description : Which of the following materials is used for overhead transmission lines ? (a) Steel cored aluminium (b) Galvanised steel (c) Cadmium copper (d) Any of the above
Last Answer : (d) Any of the above
Description : The fermenter used for the production of ethyl alcohol from molasses is made of (A) Wood (B) Concrete (C) Copper bearing steel (D) Porcelain
Last Answer : (C) Copper bearing steel
Description : Copper is dissolved from its ore by H2SO4 in a percolation tank made of (A) Wood (B) Stainless steel (C) Reinforced concrete lined with lead (D) High silicon iron (14% Si)
Last Answer : (C) Reinforced concrete lined with lead
Description : The coefficient of static friction will have the highest value in case of a.Mild steel and mild steel b.Mild steel and copper c.Cast iron and steel d.Rope and wood e.Any of the above loctions
Last Answer : d. Rope and wood
Description : Which of the following materials may prove unsuitable for handling acetic acid (glacial & anhydrous) at 40°C? (A) Silicone rubber, teflon, porcelain and wood (B) Nickel, monel, stainless steel and graphite (C) Aluminium, copper, high silicon iron (D) Brass, cast iron, mild steel and tin
Last Answer : (D) Brass, cast iron, mild steel and tin
Description : Out of the following, maximum temperature drop for a given heat flow & for the same thickness will be in the case of (A) Steel (B) Glass wood (C) Copper (D) Fireclay bricks
Last Answer : B) Glass wood
Description : State Magneto-striction. Draw Hysteresis loop for : (i) High silicon steel (ii) Copper (iii) Soft iron (iv) Wood
Last Answer : Magneto-striction: It is the change in dimensions of ferro magnetic material when it is magnetized for eg. Silicon steel, iron or any ferromagnetic material. i) Hysteresis loop for High silicon steel : ... loop for Soft iron : iv) Hysteresis loop for Copper and Wood :
Last Answer : Copper conductors are generally used for transmission lines because it has longer life and high conductivity.
Description : why we use aluminium conductor and not copper in transmission lines ?
Last Answer : Because copper conductor are costlier than aluminium conductor
Description : ACSR (Aluminium Conductor Steel Reinforced) are used as (A) over head transmission lines. (B) super conductors. (C) fuse (D) underground cables.
Last Answer : (A) over head transmission lines.
Description : Sulphur melting pit in the sulphuric acid plant is made of (A) Lead lined stainless steel (B) Cast iron (C) Steel or cement-brick lined (D) Hard wood
Last Answer : (C) Steel or cement-brick lined
Description : In the Kraft process of sulphate paper pulp manufacture, the black liquor and the white liquor storage tank is made of (A) Concrete (B) Wood (C) Steel (D) Porcelain
Last Answer : (C) Steel
Description : Man-made noise is usually from _______. A. transmission over power lines and by ground wave B. sky-wave C. space-wave D. troposphere
Last Answer : A. transmission over power lines and by ground wave