4-Quadrent operation of chopper I is positive but V is may be
positive are negative operates in which quadrant
a) 1 and 2
b) 2 and 3
c) 1 and 3
d) 1 and 4

1 Answer

Answer :

Ans: 1 and 4

Related questions

Description : Explain two-quadrant chopper.........

Last Answer : Two quadrant chopper:  There are two semiconductor controllable switches in the two-quadrant chopper. Two quadrant type A chopper: The figure shows the type A chopper. Both the switch never turn on at ... 2 are turned on then Vo=Vs. When chopper 1 and chopper 2 are off then Vo=-Vs.

Description : A step-down chopper, fed from a 120 volt DC source, operates a DC motor whose armature e.m.f. and armature resistance are 100 volt and 0.5Ω respectively. With the magnitude control ratio 0.6, the quadrant of operation DC motor is  (a) First (b) Second (c) Third (d) Fourth

Last Answer : A step-down chopper, fed from a 120 volt DC source, operates a DC motor whose armature e.m.f. and armature resistance are 100 volt and 0.5Ω respectively. With the magnitude control ratio 0.6, the quadrant of operation DC motor is First

Description : What is meant by four quadrant operation?

Last Answer : A motor operate in two modes-motoring and braking. In motoring, it converts electrical energy into mechanical energy, which supports its motion. In braking, it works as a generator converting ... the motion. Motor can provide motoring and braking operations for both forward and reverse directions.

Description : A 220/440 V, 50 Hz, 5 KVA, single phase transformer operates on 220V, 40Hz supply with secondary winding open circuited. Then (A) Both eddy current and hysteresis losses decreases. (B) Both ... same but hysteresis loss increases. (D) Eddy current loss increases but hysteresis loss remains the same.

Last Answer : (A) Both eddy current and hysteresis losses decreases.

Description : The winch shown in the illustration operates in any of the positions with the master switch in the 'lower' direction, but will not 'hoist' in any of the master switch hoist positions. Which of the listed faults ... '2M' in the power circuit may be badly corroded. D. Series relay 'FR' may be open.

Last Answer : Answer: A

Description : What are the disadvantages of load commutated chopper?

Last Answer : a. For high power applications, efficiency becomes very low because of high switching losses at high operating frequencies. b. Freewheeling diode is subjected to twice the supply voltage. c ... other pair is commutated. This can be realized by sensing the capacitor current that is alternating.

Description : What are the advantages of load commutated chopper?

Last Answer : a. Commutating inductor is not required. b. It is capable of commutating any amount of load current. c. It can work at high frequencies in the order of kHz. d. Filtering requirements are minimal.

Description : What are the advantages of current commutated chopper?

Last Answer : a. The capacitor always remains charged with the correct polarity. b. Commutation is reliable as load current is less than the peak commutation current ICP. c. The auxiliary thyristor TA is naturally commutated as its current passes through zero value.

Description : What are the different types of chopper with respect to commutation process?

Last Answer : a. Voltage commutated chopper. b. Current commutated chopper. c. Load commutated chopper.

Description : Write down the expression for the average output voltage for step down and step up chopper.

Last Answer : Average output voltage for step down chopper is VO= αVS. Average output voltage for step up chopper is VO= αVSx [1/ ( 1- α)].

Description : What is meant by PWM control in dc chopper?

Last Answer : In this control method, the on time Ton is varied but chopping frequency is kept constant. The width of the pulse is varied and hence this type of control is known as PulseWidth Modulation (PWM).

Description : What is meant by FM control in a dc chopper?

Last Answer : In frequency modulation control, the chopping frequency f (or the chopping period T) is varied. Here two controls are possible. a. On-time T onis kept constant b. Off period T offis kept constant.

Description : Write down the expression for average output voltage for step up chopper.

Last Answer : Average output voltage for step down chopper V0= Vs, αis the duty cycle 1- α

Description : Write down the expression for average output voltage for step down chopper.

Last Answer : Average output voltage for step down chopper V0 = αVs, αis the duty cycle

Description : What is meant by step-up and step-down chopper?

Last Answer : In a step- down chopper or Buck converter, the average output voltage is less than the input voltage. In a step- up chopper or Boost converter, the average output voltage is more than the input voltage.

Description : What are the applications of dc chopper?

Last Answer : Chopper provides a. High efficiency b. Smooth acceleration c. Fast dynamic response d. Regeneration

Description : What are the applications of dc chopper?

Last Answer : a. Battery operated vehicles b. Traction motor control in electric traction c. Trolly cars d. Marine hoists e. Mine haulers f. Electric braking.

Description : What is meant by dc chopper?

Last Answer : A dc chopper is a high speed static switch used to obtain variable dc voltage from a constant dc voltage.

Description : What is meant by chopper?

Last Answer : Chopper converts fixed dc voltage into variable dc voltage

Description : What are the control strategies of chopper?

Last Answer : The control strategies of chopper are 1. Pulse width modulation PWM (Variable TON, Constant frequency) 2. Frequency modulation (Constant TON or TOFF, Variable frequency) 3. Current Limit Control (CLC)

Description : The four-quadrant dual operation requires  (a) Two full converters in series  (b) Two full converters connected back to back  (c) Two full converters connected in parallel.  (d) Two semiconverters connected back to back

Last Answer : The four-quadrant dual operation requires Two full converters connected back to back 

Description : A four -quadrant operation requires two full converters connected in  (1) Series (3) Back to back (2) Parallel (4) Series Cascade

Last Answer : A four-quadrant operation requires two full converters connected in Parallel 

Description : In which quadrant(s), the abscissa of a point is negative? -Maths 9th

Last Answer : Solution:- II and III quadrants

Description : If both coordinates of a point are negative in which quadrant is the point located?

Last Answer : Feel Free to Answer

Description : What quadrant is 5 and negative 8?

Last Answer : It is in quadrant IV.

Description : What quadrant is 5 and negative 8?

Last Answer : It is in quadrant IV.

Description : In which quadrant does a point both of whose coordinates are positive lie? -Maths 9th

Last Answer : Solution :- I quadrant.

Description : If two functions A and B are discrete, their Green’s value for a region of circle of radius a in the positive quadrant is a) ∞ b) -∞ c) 0 d) Does not exist

Last Answer : d) Does not exist

Description : 55. If two constraints do not intersect in the positive quadrant of the graph, then a. The problem is infeasible b. The solution is unbounded c. One of the constraints is redundant d. None of the above

Last Answer : a. The problem is infeasible

Description : 32. A positive sign of appendicitis is localized and rebound tenderness on palpation at which quadrant of the abdomen?

Last Answer : D. Right lower quadrant

Description : An open occurring within the field rheostat of an AC generator can be detected by short circuiting its terminals and observing a ____________. A. negative deflection of the wattmeter pointer B. ... of the wattmeter pointer C. buildup of alternator voltage D. low, but constant alternator voltage

Last Answer : Answer: C

Description : A particle of mass m is moving along a straight path through the origin of coordinates with a velocity v. The angular momentum of the particle about the origin (a) mv (b) Depends on its distance from origin (c) Is zero (d) Changes from positive to negative as it passes through the origin

Last Answer : Ans:(c)

Description : In a furnace employing forced draught as compared to induced draught, (A) Air is sucked in, so air leaks are more and hence the furnace efficiency is reduced (B) The fan operates hot and hence blades are liable to corrosion and erosion (C) Positive pressure exists in the furnace (D) None of these

Last Answer : (C) Positive pressure exists in the furnace

Description : Explain the operation of 48 V battery charger. 

Last Answer : The supply for the charger is from MCC. The supply is tapped for power supply to control card, PF correction capacitor. LC filter is used for suppressing surge voltage. The main supply is ... works on principle of magnetic amplifier. There is also provision for smooth rising of output voltage. 

Description : What is the power of a portable radio that operates on 24 v two 12 v batteries in series and draws 2.2 a current?

Last Answer : The power in this case is equal to the voltage, times thecurrent. Because of the units used, the answer will be inwatts.

Description : If a 220/440 V, 50 Hz, 5 KVA, single-phase transformer operates on 220V, 40Hz supply with secondary winding open circuited: (A) both the eddy current and the hysteresis losses will decrease ... losses will increase (D) eddy current losses will increase but the hysteresis losses will remain the same

Last Answer : If a 220/440 V, 50 Hz, 5 KVA, single-phase transformer operates on 220V, 40Hz supply with secondary winding open circuited: both the eddy current and the hysteresis losses will decrease

Description : In the schematic diagram of the DC compound generator shown in the illustration, the positive ammeter reading is 500 amps and the negative ammeter reading is 475 amps. What is the current flow through the neutral bus? EL-0037 A. 0 amp B. 12.5 amp C. 25 amp D. 975 amp

Last Answer : Answer: C

Description : What is the calculated voltage at the positive and negative terminals of the battery shown in the illustration if each cell has a voltage of 1.5 volts? EL-0034 A. 1.5 volts B. 3.0 volts C. 6.0 volts D. 12.0 volts

Last Answer : Answer: A

Description : Batteries 'A' and 'B' shown in the illustration are 6 volts each and batteries 'C' and 'D' are 24 volts each. If 'A' were connected in series-opposing to 'C' and 'B' was similarly ... the top terminal C. 30 volts, negative at the bottom terminal D. 30 volts, positive at the bottom terminal

Last Answer : Answer: A

Description : If the electricity represented by the wave form in 'B' were applied to the left side of the illustrated circuit, the output on the right side would be ____________. EL-0064 A. direct current with the ... lower lead D. clipped to a value equal to the square root of 3 times the input voltage value

Last Answer : Answer: C

Description : As the ahead valve opens as shown in the illustration, pin #5 of the Sensor ______________. EL-0099 A. becomes more negative B. becomes more positive C. approaches neutral point D. approaches ground potential

Last Answer : Answer: B

Description : A voltmeter located on a control panel has been operating correctly for six months, suddenly burns out. After removing it, it is found that neither side of the meter has been grounded. When ... side and the ground C. installed exactly as the old installation D. grounded to the positive side

Last Answer : Answer: C

Description : If a 6 volt battery were connected in series with a 24 volt battery by putting their negative terminals together, what would be the result? A. 'Zero' volts B. 12 volts of the opposite polarity C. 18 volts, positive on the 24 volt battery D. 30 volts, negative on the 24 volt battery

Last Answer : Answer: C

Description : Which of the processes listed occurs during the charging of a lead-acid storage battery? A. Negative plates change to lead peroxide. B. Positive plates change to lead peroxide. C. Both plates change to lead peroxide. D. Both plates change to lead sulfate.

Last Answer : Answer: B

Description : Batteries 'A' and 'B' shown in the illustration are 6 volts each and batteries 'C' and 'D' are 24 volts each. If 'A' and 'B' were reconnected to be in series-opposing to 'C' and 'D' ... at the top terminal C. 30 volts, negative at the bottom terminal D. 30 volts, positive at the bottom terminal

Last Answer : Answer: A

Description : A bus disconnect link is used to isolate _____________. A. one bus bar from another B. the generator circuit breaker from the bus C. different phases from the equalizer connection D. positive and negative buses from the neutral

Last Answer : Answer: B

Description : In a simple series circuit, the entire source voltage will drop across ______________. A. the resistor next to the negative terminal B. a short circuit C. the resistor next to the positive terminal D. an open circuit

Last Answer : Answer: D