In a Computer_________ is capable to store single binary bit.
1 Capacitor
2 Flip Flop
3 Register
4 Inductor

1 Answer

Answer :

2 Flip Flop

Related questions

Description : In a Computer_________ is capable to store single binary bit. 1) Capacitor 2) Flip Flop 3) Register 4) Inductor

Last Answer : 2) Flip Flop

Description : In a computer is capable to store single binary bit. A) Capacitor B) Flip flop C) Register D) Inductor

Last Answer : Answer : B

Description : Which circuit is used to store one bit of data ? (1) Register (2) Flip Flop (3) Vector (4) Encoder

Last Answer : Flip Flop

Description : The circuit used to store one bit of data is known as_____ A. Encoder B. OR C. Flip Flop D. None of the Above

Last Answer : C. Flip Flop

Description : How many flip flop are required to store the binary value of 1101?

Last Answer : What is the answer ?

Description : Register are assumed to use positive-edge-triggered _ a. Flip-flop b. Logics Cc. Circuit d. Operation

Last Answer : a. Flip-flop

Description : Which of the following memory device stores information such as subscriber’s identification number in GSM? a) Register b) Flip flop c) SIM d) SMS

Last Answer : c) SIM

Description : Which Flip Flop is used to store data in registers? (A) D Flip Flop (B) JK Flip Flop (C) RS Flip Flop (D) None of the Above

Last Answer : (A) D Flip Flop

Description : In which computers, the binary number are represented by a set of binary storage device such as flip flop: a. Microcomputer b. Personal computer c. Digital computer

Last Answer : c. Digital computer

Description : The bits are shifted and the first flip-flop receives its binary information from the____ a. Serial output b. Serial input c. Both d. None

Last Answer : b. Serial input

Description : A register capable of shifting its binary information either to the right or the left is called a_________ A. parallel register. B. serial register. C. shift register. D. storage register.

Last Answer : C. shift register.

Description : Each flip-flop in a 4-bit ripple counter introduces a maximum delay of 40 n sec. The maximum clock frequency is (a) 2.65 MHz (b) 6.25 MHz (c) 5.26 MHz (d) 6.52 MHz 

Last Answer : Each flip-flop in a 4-bit ripple counter introduces a maximum delay of 40 ns. The maximum clock frequency is 6.25MHz. nff  * Tdelay = 4*40 =160ns so, max. frequency = 1/ (200*10-9 ) = 6.25MHz          

Description : What is SR flip-flop ?

Last Answer : SR Flip-flop is the simplest flip flop. The full form of SR is - Set Reset . In SR flip-flop, setting the output state to 1 or HIGH is called SET and 0 or LOW is called RESET . SR flip- ... formed by connecting two NAND gates or NOR gates and connecting the input of one to the output of the other .

Description : Which of the following circuit is used as a 'Memory device' in computers? 1) Rectifier 2) Flip-Flop 3) Comparator 4) Attenuator

Last Answer : 2) Flip-Flop

Description : Which of the following circuit is used as 'Memory device' in computers ? (1) Rectifier (2) Flip-Flop (3) Comparator (4) Attenuator

Last Answer : Flip-Flop

Description : Device used to store energy in electrical circuits is A. resistor B. inductor C. capacitor D. diode

Last Answer : capacitor

Description : A ____is a group of devices that store digital data: a) circuits b) register c) bit d) None of The Above

Last Answer : b) register

Description : _______is not as fast as SRAM but is cheaper and is used for main memory. Each bit uses a single capacitor and single transistor circuit.: a) DRAM b) SDRAM c) Both of Above d) None of These

Last Answer : a) DRAM

Description : I had a great uncle who said a 'flip-flop' was an old slang word for a radio. Has anyone else ever heard this?

Last Answer : I never heard of that. I’m 67.

Description : When I look at her, my heart does a flip-flop. Why?

Last Answer : JP Must be a case of puppy love. You made me stop and look at the picture of my two goldens that I keep on my desk. I lost them a few years ago. Enjoy every minute of your time with her.

Description : Is the flip flop sandals on guys a fad or is it here to stay?

Last Answer : They are here to stay. I don't wear them because I'm desperate to fit in. I wear them because I like air on my feet. I'm also used to colder temperatures, so it's not a big deal to wear them ... better because there is colder air on my feet and they are easy to slip on if I have to run out quickly.

Description : 15 things you never knew about tarek and christina from flip or flop?

Last Answer : Answer written by Urbo.com in March 21 2016It all started as an office romance.Tarek and Christina met at a real estate office. "We started our relationship working together," Christina said. Was it ... Scott's "Brother vs. Brother." What impromptu HGTV appearances are in store for them this year?

Description : What's That Flip Flop Feeling My Heart Is Making?

Last Answer : A heart arrhythmia can be a life-threatening situation and requires medical attention. If you suffer with this heart condition chances are that you have already been counseled on avoiding stimulants. ... this activity will bring the heart back under control until medical attention can be consulted.

Description : Which of the following features is predicted by the Nicolson–Singer fluid mosaic model of biological membranes? (A) Membrane lipids do not diffuse laterally (B) Membrane lipid is primarily in a monolayer form (C) Membrane lipids freely flip-flop (D) Membrane proteins may diffuse laterally

Last Answer : Answer : D

Description : Which of the following is not a magnetic memory: a) Flip-flop b) Tape c) Drum d) Disk

Last Answer : Ans: A

Description : The schematic diagram shown in the illustration represents which of the listed solid-state circuits? EL-0069 A. Bridge rectifier B. Magnetic amplifier C. Flip-flop generator D. Cathodic amplifier

Last Answer : Answer: A

Description : What is a master-slave flip-flop?

Last Answer : A master-slave flip-flop consists of two flip-flops where one circuit serves as a master and the other as a slave.

Description : What is edge-triggered flip-flop?

Last Answer : The problem of race around condition can solved by edge triggering flip flop. The term edge triggering means that the flip-flop changes state either at the positive ... negative edge of the clock pulse and it is sensitive to its inputs only at this transition of the clock.

Description : What is the operation of T flip-flop?

Last Answer : T flip-flop is also known as Toggle flip-flop. • When T=0 there is no change in the output. • When T=1 the output switch to the complement state (ie) the output toggles.

Description : What is the operation of JK flip-flop?

Last Answer : When K input is low and J input is high the Q output of flip-flop is set. When K input is high and J input is low the Q output of flip-flop is reset. When both the inputs ... are high it is possible to set or reset the flip-flop (ie) the output toggle on the next positive clock edge.

Description : What is the operation of D flip-flop?

Last Answer : In D flip-flop during the occurrence of clock pulse if D=1, the output Q is set and if D=0, the output is reset.

Description : What are the different types of flip-flop?

Last Answer : There are various types of flip flops. Some of them are mentioned below they are, RS flip-flop SR flip-flop D flip-flop JK flip-flop T flip-flop

Description : Define Flip flop.

Last Answer : The basic unit for storage is flip flop. A flip-flop maintains its output state either at 1 or 0 until directed by an input signal to change its state.

Description : According to widely accepted fluid mosaic model cell membranes are semi-fluid, where lipids and integral proteins can diffuse randomly. In recent years, this model has been modified in several ... domains of the membrane. (d) Many proteins remain completely embedded within the lipid bilayer.

Last Answer : (b) Proteins can also undergo flip-flop movements in the lipid bilayer.

Description : Keeping in view the fluid mosaic model' for the structure of cell membrane, which one of the following statement is correct with respect to the movements of lipids and proteins from one lipid ... ) Both lipids and proteins can flip-flop (d) While lipids can rarely flip-flop, proteins cannot.

Last Answer : (d) While lipids can rarely flip-flop, proteins cannot.

Description : What are digital elctronic flip flops, State the different types of flip flop and their uses.

Last Answer : Ans-digital electronic flip flops are temporary single bit storage devices.different types of flip flops are JK f/f RS f/f T F/F D f/f this flip flops are using as storage device delay purpose as counter for toggled as shift register etc

Description : What is the difference between latches and flip flop ?

Last Answer : Ans-Latche is a bistable circuit which responds to change of logic level as they occur. It has no external inputs. Flip flop is a basic element of memory. It stores a single bit. It has a ... are edge sensitive device so it is said that latches are level triggered and flip flop is edge triggered.

Description : What are digital elctronic flip flops, State the different types of flip flop and their uses.

Last Answer : Ans-Digital electronic flip flops are temporary single bit storage devices. Different types of flip flops are JK f/f RS f/f T F/F D f/f this flip flops are using as storage device delay purpose as counter for toggled as shift register etc

Description : If a voltage (positive or negative) is measured on the "1" output of a flip-flop, what state is it in?

Last Answer : SET state.

Description : How many stable states are there for a flip-flop?

Last Answer : Two.

Description : SOD pin can drive a D flip-flop? a) SOD cannot drive any flip-flops. b) SOD cannot drive D flip-flop, but can drive any other flop-flops. c) Yes, SOD can drive D flop-flop. d) No, SOD cannot drive any other flop-flops except D flop-flop

Last Answer : b) SOD cannot drive D flip-flop, but can drive any other flop-flops

Description : Explain the flip-flop excitation tables for RS FF.

Last Answer : • RS flip-flop • In RS flip-flop there are four possible transitions from the present state to the next state. They are, • 0 0 transition: This can happen either when R=S=0 or when R=1 and S=0. • 0 1 transition: This can happen only when S=1 and R=0. • 1 0 transition: This

Description : What is a master-slave flip-flop?

Last Answer : A master-slave flip-flop consists of two flip-flops where one circuit serves as a master and the other as a slave.

Description : What is edge-triggered flip-flop?

Last Answer : The problem of race around condition can solved by edge triggering flip flop. The term edge triggering means that the flip-flop changes state either at the positive edge or negative edge of the clock pulse and it is sensitive to its inputs only at this transition of the clock.

Description : What is the operation of T flip-flop?

Last Answer : T flip-flop is also known as Toggle flip-flop. • When T=0 there is no change in the output. • When T=1 t

Description : What is the operation of JK flip-flop?

Last Answer : When K input is low and J input is high the Q output of flip-flop is set. When K input is high and J input is low the Q output of flip-flop is reset. When both the inputs K and ... are high it is possible to set or reset the flip-flop (ie) the output toggle on the next positive clock edge.

Description : What is the operation of D flip-flop?

Last Answer : In D flip-flop during the occurrence of clock pulse if D=1, the output Q is set and if D=0, the output is reset.

Description : What are the different types of flip-flop?

Last Answer : There are various types of flip flops. Some of them are mentioned below they are, 1. RS flip-flop 2. SR flip-flop 3. D flip-flop 4. JK flip-flop 5. T flip-flop

Description : Define Flip flop.

Last Answer : The basic unit for storage is flip flop. A flip-flop maintains its output state either at 1 or 0 until directed by an input signal to change its state.

Description : An eight stage ripple counter uses a flip-flop with propagation delay of 75 nanoseconds. The pulse width of the strobe is 50ns. The frequency of the input signal which can be used for proper operation of the counter is approximately (A) 1 MHz. (B) 500 MHz. (C) 2 MHz. (D) 4 MHz.

Last Answer : Maximum time taken for all flip-flops to stabilize is 75ns x 8 + 50 = 650ns. Frequency of operation must be less than 1/650ns = 1.5 MHz.