In a stepper motor, the detent torque means

In a stepper motor, the detent torque means 

(A) minimum of the static torque with the phase winding excited (B) maximum of the static torque with the phase winding excited (C) minimum of the static torque with the phase winding unexcited (D) maximum of the static torque with the phase winding unexcited
by

1 Answer

Answer :

In a stepper motor, the detent torque means maximum of the static torque with the phase winding unexcited

by

Related questions

For a 1.8, 2-phase bipolar stepper motor, the stepping rate is 100 steps/second. The rotational speed of the

Description : For a 1.8o, 2-phase bipolar stepper motor, the stepping rate is 100 steps/second. The rotational speed of the motor in rpm is  (A) 15 (B) 30 (C) 60 (D) 90

Last Answer : For a 1.8o, 2-phase bipolar stepper motor, the stepping rate is 100 steps/second. The rotational speed of the motor in rpm is 30 

The number of poles of 8/6 stepper motor can be :

Description : The number of poles of 8/6 stepper motor can be :

Last Answer : The number of poles of 8/6 stepper motor can be : 4

The speed of a 2-pole, 3-phase stepper motor operated by 1200 pulses/min

Description : The speed of a 2-pole, 3-phase stepper motor operated by 1200 pulses/min (A) 100 rpm (B) 200 rpm (C) 400 rpm (D) 800 rpm

Last Answer : The speed of a 2-pole, 3-phase stepper motor operated by 1200 pulses/min 200 rpm

The torque, in a _____________is proportional to the square of the armature current (A) DC shunt motor (B) stepper motor (C) 2-phase servomotor (D) DC series motor

Description : The torque, in a _____________is proportional to the square of the armature current (A) DC shunt motor (B) stepper motor (C) 2-phase servomotor (D) DC series motor

Last Answer : (D) DC series motor

Stepper motors are used in

Description : Stepper motors are used in  (1) printers (2) lifts (3) amplifiers (4) oscillators

Last Answer : Stepper motors are used in printers 

If the current in the armature of do series motor is reduced to 5%, the torque of the motor will become:

Description : If the current in the armature of do series motor is reduced to 5%, the torque of the motor will become: (1) 50% of the previous value (2) 25% of the previous value (3) 150% of the previous value (4) 125% of the previous value

Last Answer : If the current in the armature of do series motor is reduced to 5%, the torque of the motor will become: 25% of the previous value

The torque speed characteristic of a repulsion motor resembles which of the following d.c. motor

Description : The torque speed characteristic of a repulsion motor resembles which of the following d.c. motor characteristics  A) Separately excited B) Shunt C) Series D) Compound

Last Answer : The torque speed characteristic of a repulsion motor resembles which of the following d.c. motor characteristics Series 

In a double squirrel cage induction motor, good starting torque is produced as

Description : In a double squirrel cage induction motor, good starting torque is produced as (A) Large current flows through the outer high resistance winding. (B) Large current flows through the inner high ... the outer high resistance winding. (D) Large current flows through the inner low resistance winding.

Last Answer : In a double squirrel cage induction motor, good starting torque is produced as Large current flows through the outer high resistance winding.

In an induction motor if the flux density is reduced to one-half, of its normal value then the torque will

Description : In an induction motor if the flux density is reduced to one-half, of its normal value then the torque will  (1) reduce to one-half (2) reduce to one-fourth (3) remain unchanged (4) increase four times

Last Answer : In an induction motor if the flux density is reduced.to one-half, of its normal value then the torque will reduce to one-fourth

In a 2 kW, 200 V, 1000 rpm. DC series motor the torque at full load was found to be 0.3 N -m. The torque at

Description : In a 2 kW, 200 V, 1000 rpm. DC series motor the torque at full load was found to be 0.3 N -m. The torque at half full load in N -m is :

Last Answer : In a 2 kW, 200 V, 1000 rpm. DC series motor the torque at full load was found to be 0.3 N -m. The torque at half full load in N -m is : 0.075

Torque developed by a three-phase, 400V, induction motor is 100 N -m. If the applied voltage is reduced to

Description : Torque developed by a three-phase, 400V, induction motor is 100 N -m. If the applied voltage is reduced to 200-V, the d'veloped torque will be

Last Answer : Torque developed by a three-phase, 400V, induction motor is 100 N -m. If the applied voltage is reduced to 200-V, the d'veloped torque will be 25 N -m

The torque developed by any 3-phase induction motor at 0.8 p.u. slip is

Description : The torque developed by any 3-phase induction motor at 0.8 p.u. slip is (A) Full-load torque (B) unstable torque (C) starting torque (D) break down

Last Answer : The torque developed by any 3-phase induction motor at 0.8 p.u. slip is unstable torque

In case the back e.m.f. and the speed of a D.C. motor are doubled, the torque developed by the motor will?

Last Answer : In case the back e.m.f. and the speed of a D.C. motor are doubled, the torque developed by the motor will remain unchanged.

The armature torque of the D.C. shunt motor is proportional to?

Last Answer : The armature torque of the D.C. shunt motor is proportional to armature current.

For the same H.P. rating and full load speed, following motor has poor starting torque?

Last Answer : For the same H.P. rating and full load speed, following motor has poor starting torque differentially compounded.

In a D.C. series motor, if the armature current is reduced by 50%, the torque of the motor will be equal to?

Last Answer : In a D.C. series motor, if the armature current is reduced by 50%, the torque of the motor will be equal to 25% of the previous value.

In repulsion motor, zero torque is developed when?

Last Answer : In repulsion motor, zero torque is developed when brush axis coincides with the field axis and brush axis is 90° electrical to field axis.

Speed torque characteristic of a repulsion induction motor is similar to that of a D.C.?

Last Answer : Speed torque characteristic of a repulsion induction motor is similar to that of a D.C. compound motor.

In repulsion motor, maximum torque is developed when?

Last Answer : In repulsion motor, maximum torque is developed when brush axis is at 45° electrical to the field axis.

which single phase induction motor has highest starting torque?

Last Answer : Capacitor start motor has high torque in starting

What is a stepper motor in Arduino?

Description : What is a stepper motor in Arduino?

Last Answer : A stepper motor in Arduino is a type of motor that can be used for precise control of position, speed, and acceleration.

What is a stepper motor in Arduino?

Description : What is a stepper motor in Arduino?

Last Answer : A stepper motor is a type of motor used in Arduino projects that can rotate to a specific position based on a signal sent by an Arduino board.

Programming a NEMA 17 stepper motor to microstep with an Arduino?

Description : Programming a NEMA 17 stepper motor to microstep with an Arduino?

Last Answer : There are literally thousands of arduino code examples out there. This is something you should figure out on your own because the act of doing so will make you a better tinkerer. A typical stepper will have like ... digital I/o pins to output the step sequence. Even an uno or mini pro will do that.

Selecting a correct DC stepper motor for a project?

Description : Selecting a correct DC stepper motor for a project?

Last Answer : You will need to calculate the moment of inertia of the shaft you are turning so you can determine the required torque. You will get that after you determine the peak acceleration from the velocity ... Once you have acceleration, displacement, and moment of inertia you can size the motor for power.

Stepper Motor What ?

Last Answer : Stepper Motor Such One Kind of Motor Which Equal In the corner Rotation Generated By To whom Step To say Is Since Step by step Step by step Equal In the corner Rotation Creation By So This one Stepper Motor Says.

Where is the stepper motor located in peugeot?

Description : Where is the stepper motor located in peugeot?

Last Answer : Need answer

How do I clean a stepper motor Peugeot 206?

Description : How do I clean a stepper motor Peugeot 206?

Last Answer : Need answer

How much does it cost to get a replacement stepper motor?

Description : How much does it cost to get a replacement stepper motor?

Last Answer : The cost for a replacement stepper motor wil depend greatly on the exact type of motor to be relced. Stpper motors are availbl in 100's of varieties at the low end th cost is $25,but can reach into the thousands.

What's the purpose of a stepper motor?

Description : What's the purpose of a stepper motor?

Last Answer : Industrial applications of a stepper motor are in multi-axis machine CNC machines.They are also commonly usd in are used in floppy disk drives, flatbed scanners,and computer printers.

What is a stepper motor driver used for?

Description : What is a stepper motor driver used for?

Last Answer : You can find good cheap stepper motor drivers rebuilt online at a hobby electronics website. the driver tell the stepper motor how many steps to take at a time.

What Is Stepper Motor. what Is Its Uses?

Description : What Is Stepper Motor. what Is Its Uses?

Last Answer : Stepper motor is the electrical machine which act upon input pulse applied to it. it is one type of synchronous motor which runs in steps in either direction instead of running in complete cycle.so, in automation parts it is used.

In the actuator arm assembly of a hard disk drive transport, what device can position the magnetic heads to the correct track of a hard disk more accurately than a dc stepper motor?

Description : In the actuator arm assembly of a hard disk drive transport, what device can position the magnetic heads to the correct track of a hard disk more accurately than a dc stepper motor?

Last Answer : Voice coil servo.

What part of a floppy disk drive transport uses a dc stepper motor to position the magnetic heads over the recording surface of a floppy disk?

Description : What part of a floppy disk drive transport uses a dc stepper motor to position the magnetic heads over the recording surface of a floppy disk?

Last Answer : Actuator arm assembly.

A 1.8°step, 4-phase stepper motor has a total of 40 teeth on 8 pole of stator. The number of rotor teeth for their rotor will be (A) 40 (B) 50 (C) 100 (D) 80

Description : A 1.8°step, 4-phase stepper motor has a total of 40 teeth on 8 pole of stator. The number of rotor teeth for their rotor will be (A) 40 (B) 50 (C) 100 (D) 80

Last Answer : (B) 50

An a.c. tachometer is just a ________with one phase excited from the carrier frequency. (A) two-phase A.C. servomotor (B) two-phase induction motor (C) A.C. operated universal motor (D) hybrid stepper motor.

Description : An a.c. tachometer is just a ________with one phase excited from the carrier frequency. (A) two-phase A.C. servomotor (B) two-phase induction motor (C) A.C. operated universal motor (D) hybrid stepper motor.

Last Answer : Ans: D This is a special purpose machine whose stator coil can be energized by electronically switched current.

A 3 stack stepper motor with 12 numbers of rotor teeth has a step angle of ____________. (A) 12° (B) 8° (C) 24° (D) 10°

Description : A 3 stack stepper motor with 12 numbers of rotor teeth has a step angle of ____________. (A) 12° (B) 8° (C) 24° (D) 10°

Last Answer : Ans. D Given m = 3, Nr = 12 Step angle = 360 / m x Nr = 360 /3 x 12 = 10°

A stepper motor is (A) a dc motor. (B) a single-phase ac motor. (C) a multi-phase motor. (D) a two phase motor.

Description : A stepper motor is (A) a dc motor. (B) a single-phase ac motor. (C) a multi-phase motor. (D) a two phase motor.

Last Answer : Ans: D Stepper motor works on 1-phase-ON or 2-phase –ON modes of operation

In a stepper motor the angular displacement (A) can be precisely controlled. (B) it cannot be readily interfaced with micro computer based controller. (C) the angular displacement cannot be precisely controlled. (D) it cannot be used for positioning of work tables and tools in NC machines.

Description : In a stepper motor the angular displacement (A) can be precisely controlled. (B) it cannot be readily interfaced with micro computer based controller. (C) the angular displacement cannot be precisely controlled. (D) it cannot be used for positioning of work tables and tools in NC machines.

Last Answer : (A) can be precisely controlled.

List applications of stepper motor.

Description : List applications of stepper motor.

Last Answer : Applications of Stepper Motor: 1) Computer controlled systems 2) Numerical control of machine tools 3) Tape drives 4) Floppy disc drives 5) Computer printers 6) X-Y plotters 7) ... ) Extruders 21) Engravers 22) Analytical and Medical instruments 23) Embroidery Machines 24) Packaging Machines

List different types of stepper motor. State one application of stepper motor.

Description : List different types of stepper motor. State one application of stepper motor.

Last Answer : Types of stepper motor : (i)Variable - reluctance motor (ii) Permanent- magnet motors (iii) Hybrid motors. Applications of stepper motor : In robotics, In CNC machines, In computers, printers, ... In Watches, In biomedical applications such as X-ray machines, CT scan, In Process control systems. 

applications of each: i) Universal motor ii) Stepper motor.

Description : applications of each: i) Universal motor ii) Stepper motor.

Last Answer : i) Applications of Universal motor: 1) portable drills 2) hair dryers 3) grinders 4) mixers 5) table-fans 6) blowers 7) polishers 8) Kitchen appliances  ii) Applications of Stepper motor ... 7) robotics 8) CNC machine 9) Control systems 10) Biomedical applications 10) XY recorder 11) plotters

Write two application of the following motor (i) AC servo motor (ii) Stepper motor

Description : Write two application of the following motor (i) AC servo motor (ii) Stepper motor

Last Answer : (i)Applications of AC Servo Motor: 1. Computers 2. Robotics and toys 3. CD/DVD players 4. Textile industries 5. Instrument servos 6. Tracking and guidance system 7. Self- ... Laser cutters 20.Extruders 21.Engravers 22.Analytical and Medical instruments 23.Embroidery Machines 24.Packeging Machines

A permanent magnet stepper motor with 8 poles in stator and 6 poles in rotor will have a step angle of

Description : A permanent magnet stepper motor with 8 poles in stator and 6 poles in rotor will have a step angle of (a) 7.5° (b) 15° (c) 30° (d) 60°

Last Answer : d

A 3 stack stepper motor with 12 number of rotor teeth has a step angle of:

Description : A 3 stack stepper motor with 12 number of rotor teeth has a step angle of: (A) 12° (B) 8° (C) 24° (D) 10°

Last Answer : A 3 stack stepper motor with 12 number of rotor teeth has a step angle of: 10°

An 1.8° step, 4 -phase stepper motor has 40 teeth on 8 poles of the stator. The number of rotor teeth for...

Description : An 1.8° step, 4 -phase stepper motor has 40 teeth on 8 poles of the stator. The number of rotor teeth for their rotor will be: (A) 40 (B) 50 (C) 100 (D) 80

Last Answer : An 1.8° step, 4 -phase stepper motor has 40 teeth on 8 poles of the stator. The number of rotor teeth for their rotor will be: 50

In a stepper motor the angular displacement:...

Description : In a stepper motor the angular displacement:  (A) can be precisely controlled (B) cannot be readily interfaced with micro computer based controller (C) cannot be precisely controlled. (D) cannot be used for positioning of work tables and tools in NC machines

Last Answer : In a stepper motor the angular displacement:  can be precisely controlled. 

stepper motor controller

Description : explain how a stepper motor is controlled using driver. give relevant hardware and software details.

Last Answer : A stepper motor is an electric motor that rotates fix number of degrees whenever we apply a step signal. the stepper motor can rotate 1.8-degree full step or ... driver 2. controlling a stepper motor directly Application of stepper motor: disk driversprintersphotocopyfax machinerobotscamcorder

Starting winding of a single phase motor of a refrigerator is disconnected from the circuit by means of a?

Last Answer : Starting winding of a single phase motor of a refrigerator is disconnected from the circuit by means of a magnetic relay.

Autotransformer starters or compensators are sometimes used with polyphase induction motors to _____________. A. reduce the voltage applied to the motor during the starting period B. increase the voltage for 'across-the-line starting' C. provide a backup means of voltage regulation for emergency starting D. allow the voltage to be either stepped up or down, depending on the application, to ensure full torque

Description : Autotransformer starters or compensators are sometimes used with polyphase induction motors to _____________. A. reduce the voltage applied to the motor during the starting period B. increase the voltage for ' ... to be either stepped up or down, depending on the application, to ensure full torque

Last Answer : Answer: A

The power factor angle and torque angle of a salient pole synchronous generator drawing a current of 1.0 pu

Description : The power factor angle and torque angle of a salient pole synchronous generator drawing a current of 1.0 pu from a lagging load are 45o and 15o, respectively. The direct axis and quadrature axis currents, respectively, are (A) 0.5 pu ... pu, 0.5 pu (C) 0.707 pu, 0.707 pu (D) 0.5 pu, 0.5 pu

Last Answer : The power factor angle and torque angle of a salient pole synchronous generator drawing a current of 1.0 pu from a lagging load are 45o and 15o, respectively. The direct axis and quadrature axis currents, respectively, are 0.866 pu, 0.5 pu