The gypsum is added to the cement for (a) Providing high strength to the cement (b) Controlling the initial setting time of cement. (c) Lowering the clinkering temp of cement (d) All the above.

The gypsum is added to the cement for
(a) Providing high strength to the cement
(b) Controlling the initial setting time of cement.
(c) Lowering the clinkering temp of cement
(d) All the above.
by

1 Answer

Answer :

(b) Controlling the initial setting time of cement.
by

Related questions

Excess lime when added (a) Makes the cement unsound (b) Causes the cement to expand and disintegrate (c) Lowering the clinkering temp of cement (d) Both ‘a’ and ‘b’

Description : Excess lime when added (a) Makes the cement unsound (b) Causes the cement to expand and disintegrate (c) Lowering the clinkering temp of cement (d) Both ‘a’ and ‘b’

Last Answer : (d) Both ‘a’ and ‘b’

Gypsum is added for (A) Colour (B) Strength (C) Controlling setting time (D) None of these

Description : Gypsum is added for (A) Colour (B) Strength (C) Controlling setting time (D) None of these

Last Answer : Answer: Option C

Pick out the wrong statement. (A) High early strength cement are made from materials having high silica to lime ratio (B) The function of gypsum in cement is to enhance its initial setting rate (C) Acid resistant cements are known as silicate cement (D) Major component of greyish Portland cement is tricalcium silicate

Description : Pick out the wrong statement. (A) High early strength cement are made from materials having high silica to lime ratio (B) The function of gypsum in cement is to enhance its initial ... cements are known as silicate cement (D) Major component of greyish Portland cement is tricalcium silicate

Last Answer : (A) High early strength cement are made from materials having high silica to lime ratio

To retard the initial setting time of cement, the compound responsible, is (A) Tri-calcium silicate (B) Gypsum (C) Di-calcium silicate (D) Tri-calcium aluminate

Description : To retard the initial setting time of cement, the compound responsible, is (A) Tri-calcium silicate (B) Gypsum (C) Di-calcium silicate (D) Tri-calcium aluminate

Last Answer : Answer: Option B

Pick out the wrong statement. (A) Dry process is used for the manufacture of cement, when the raw material is blast furnace slag (B) Portland cement is made employing wet process (C) Gypsum is added to Portland cement to lengthen its setting time (D) None of these

Description : Pick out the wrong statement. (A) Dry process is used for the manufacture of cement, when the raw material is blast furnace slag (B) Portland cement is made employing wet process (C) Gypsum is added to Portland cement to lengthen its setting time (D) None of these

Last Answer : (D) None of these

If ‘W’ is the percentage of water required for normal consistency of cement, water to be added for determination of initial setting time is (a) 0.50 W (b) 0.62 W (c) 0.75 W (d) 0.85 W

Description : If ‘W’ is the percentage of water required for normal consistency of cement, water to be added for determination of initial setting time is (a) 0.50 W (b) 0.62 W (c) 0.75 W (d) 0.85 W

Last Answer : (d) 0.85 W

Pick up the correct statement regarding low heat cement from the following: (A) It possesses less compressive strength (B) Its initial setting time is about one hour (C) Its final setting time is about 10 hours (D) All the above

Description : Pick up the correct statement regarding low heat cement from the following: (A) It possesses less compressive strength (B) Its initial setting time is about one hour (C) Its final setting time is about 10 hours (D) All the above

Last Answer : Answer: Option D

The addition of gypsum to portland cement helps in : (1) increasing the strength of cement (2) rapid setting of cement (3) preventing rapid setting of cement (4) reduction in the cost of cement

Description : The addition of gypsum to portland cement helps in : (1) increasing the strength of cement (2) rapid setting of cement (3) preventing rapid setting of cement (4) reduction in the cost of cement

Last Answer : preventing rapid setting of cement

Tricalcium aluminate (C3A) (A) Reacts fast with water (B) Generates less heat of hydration (C) Causes initial setting and early strength of cement (D) Does not contribute to develop ultimate strength

Description : Tricalcium aluminate (C3A) (A) Reacts fast with water (B) Generates less heat of hydration (C) Causes initial setting and early strength of cement (D) Does not contribute to develop ultimate strength

Last Answer : Answer: Option B

Soundness test of cement determines (A) Quality of free lime (B) Ultimate strength (C) Durability (D) Initial setting

Description : Soundness test of cement determines (A) Quality of free lime (B) Ultimate strength (C) Durability (D) Initial setting

Last Answer : Answer: Option A

Setting time of cement increases by adding (A) Gypsum (B) Hydrogen peroxide (C) Calcium chloride (D) Sodium oxide

Description : Setting time of cement increases by adding (A) Gypsum (B) Hydrogen peroxide (C) Calcium chloride (D) Sodium oxide

Last Answer : Answer: Option A

Setting time of cement increases by adding (i)gypsum (ii)sodium oxide (iii)calcium chloride [ A ] i [ B ] i and ii [ C ] i and iii [ D ] i, ii and iii

Description : Setting time of cement increases by adding (i)gypsum (ii)sodium oxide (iii)calcium chloride [ A ] i [ B ] i and ii [ C ] i and iii [ D ] i, ii and iii

Last Answer : [ A ] i

Quick setting cement is produced by adding (A) Less amount of gypsum in very fine powdered form (B) More amount of gypsum in very fine powdered form (C) Aluminium sulphate in very fine powdered form (D) Pozzolana in very fine powdered form

Description : Quick setting cement is produced by adding (A) Less amount of gypsum in very fine powdered form (B) More amount of gypsum in very fine powdered form (C) Aluminium sulphate in very fine powdered form (D) Pozzolana in very fine powdered form

Last Answer : Answer: Option C

Le Chatelier apparatus is used to determine which of the following properties for cement A) Soundness* b) Initial setting time c) Compressive strength d) Tensile strength

Description : Le Chatelier apparatus is used to determine which of the following properties for cement A) Soundness* b) Initial setting time c) Compressive strength d) Tensile strength

Last Answer : A) Soundness*

As compared to ordinary Portland cement, high alumina cement has (A) Higher initial setting time but lower final setting time (B) Lower initial setting time but higher final setting time (C) Higher initial and final setting times (D) Lower initial and final setting times

Description : As compared to ordinary Portland cement, high alumina cement has (A) Higher initial setting time but lower final setting time (B) Lower initial setting time but higher final setting time (C) Higher initial and final setting times (D) Lower initial and final setting times

Last Answer : Answer: Option A

Rapid hardening cement attains early strength due to (A) Larger proportion of lime grounded finer than normal cement (B) Lesser proportion of lime grounded coarser than normal cement (C) Lesser proportion of lime grounded finer than normal cement (D) Excess percentage of gypsum

Description : Rapid hardening cement attains early strength due to (A) Larger proportion of lime grounded finer than normal cement (B) Lesser proportion of lime grounded coarser than normal cement (C) Lesser proportion of lime grounded finer than normal cement (D) Excess percentage of gypsum

Last Answer : Answer: Option A

Early attainment of strength in rapid hardening cement is mainly due to (A) Gypsum (B) Finer grinding (C) Tri-calcium silicate (D) Tri-calcium aluminate

Description : Early attainment of strength in rapid hardening cement is mainly due to (A) Gypsum (B) Finer grinding (C) Tri-calcium silicate (D) Tri-calcium aluminate

Last Answer : Answer: Option B

The Most common admixture used to accelerate the initial setting of concrete is a) Gypsum b) Calcium chloride* c) Calcium carbonate d) Calcium bicarbonate

Description : The Most common admixture used to accelerate the initial setting of concrete is a) Gypsum b) Calcium chloride* c) Calcium carbonate d) Calcium bicarbonate

Last Answer : b) Calcium chloride*

A perfect gas has a value of R= 319.2 J/ kf.K and k= 1.26. If 120 kJ are added to 2.27 kf\g of this gas at constant pressure when the initial temp is 32.2°C? Find T2.  a. 339.4 K  b. 449.4 K  c. 559.4K  d. 669.4K formula: cp = kR/ k-1 Q= mcp(T2-T1)

Description : A perfect gas has a value of R= 319.2 J/ kf.K and k= 1.26. If 120 kJ are added to 2.27 kf\g of this gas at constant pressure when the initial temp is 32.2°C? Find T2.  a. 339.4 K  b. 449.4 K  c. 559.4K  d. 669.4K formula: cp = kR/ k-1 Q= mcp(T2-T1)

Last Answer : 339.4 K

For an ordinary Portland cement (A) Residual does not exceed 10% when sieved through IS Sieve No. 9 (B) Soundness varies from 5 to 10 mm (C) Initial setting time is not less than 30 minutes (D) Compressive stress after 7 days, is not less than 175 kg/cm2

Description : For an ordinary Portland cement (A) Residual does not exceed 10% when sieved through IS Sieve No. 9 (B) Soundness varies from 5 to 10 mm (C) Initial setting time is not less than 30 minutes (D) Compressive stress after 7 days, is not less than 175 kg/cm2

Last Answer : (C) Initial setting time is not less than 30 minutes

Initial setting time of cement for asbestos cement products should be not less than (A) 30 minutes (B) 50 minutes (C) 75 minutes (D) 90 minutes

Description : Initial setting time of cement for asbestos cement products should be not less than (A) 30 minutes (B) 50 minutes (C) 75 minutes (D) 90 minutes

Last Answer : Answer: Option D

The initial setting time for ordinary Portland cement as per IS specifications should not be less than (A) 10 minutes (B) 30 minutes (C) 60 minutes (D) 600 minutes

Description : The initial setting time for ordinary Portland cement as per IS specifications should not be less than (A) 10 minutes (B) 30 minutes (C) 60 minutes (D) 600 minutes

Last Answer : Answer: Option B

The basic purpose of a retarder in concrete is (A) To increase the initial setting time of cement paste in concrete (B) To decrease the initial setting time of cement paste in concrete (C) To render the concrete more water tight (D) To improve the workability of concrete mix

Description : The basic purpose of a retarder in concrete is (A) To increase the initial setting time of cement paste in concrete (B) To decrease the initial setting time of cement paste in concrete (C) To render the concrete more water tight (D) To improve the workability of concrete mix

Last Answer : Answer: Option A

According to IS Code , the requirement of an ordinary Portland cement is (a) The residue does not exceed 10% when sieved through is sieve no .9 (b) Its initial setting time is not less than 30 minutes. (c) its expansion is not morethan 10mm for unaerated cement (d) All the above.

Description : According to IS Code , the requirement of an ordinary Portland cement is (a) The residue does not exceed 10% when sieved through is sieve no .9 (b) Its initial setting time is not less than 30 minutes. (c) its expansion is not morethan 10mm for unaerated cement (d) All the above.

Last Answer : (d) All the above.

How does the setting of cement takes place & what is the role of gypsum in setting of cement ?

Description : How does the setting of cement takes place & what is the role of gypsum in setting of cement ?

Last Answer : Ans When mixed with water, the setting of cement takes place to give a hard mass. This is due to the hydration of the molecules of the constituents and their Rearrangement. The purpose of adding gypsum is only to slow down the process of setting of the cement so that it gets sufficiently hardened.

The function of gypsum addition during cement making is to (A) Increase the density of cement (B) Decrease the cement setting rate (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : The function of gypsum addition during cement making is to (A) Increase the density of cement (B) Decrease the cement setting rate (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (B) Decrease the cement setting rate

A slow setting cement will have higher percentage of a) tricalcium aluminate b) tricalcium silicate c) Gypsum d) Dicalcium silicate*

Description : A slow setting cement will have higher percentage of a) tricalcium aluminate b) tricalcium silicate c) Gypsum d) Dicalcium silicate*

Last Answer : C2s

How does the setting of cement takes place & what is the role of gypsum in setting of cement ?

Description : How does the setting of cement takes place & what is the role of gypsum in setting of cement ?

Last Answer : When mixed with water, the setting of cement takes place to give a hard mass. This is due to the hydration of the molecules of the constituents and their rearrangement. The purpose of adding gypsum is only to slow down the process of setting of the cement so that it gets sufficiently hardened. 

Initial setting of cement is caused due to (A) Tri-calcium silicate (B) Di-calcium silicate (C) Tri-calcium aluminate (D) Tetra calcium alumino ferrite

Description : Initial setting of cement is caused due to (A) Tri-calcium silicate (B) Di-calcium silicate (C) Tri-calcium aluminate (D) Tetra calcium alumino ferrite

Last Answer : Answer: Option C

The main constituent of cement which is responsible for initial setting of cement is (A) Di-calcium silicate (B) Tri-calcium silicate (C) Tri-calcium aluminate (D) All of the above

Description : The main constituent of cement which is responsible for initial setting of cement is (A) Di-calcium silicate (B) Tri-calcium silicate (C) Tri-calcium aluminate (D) All of the above

Last Answer : Answer: Option C

If is the percentage of water required for normal consistency, water to be added for determination of initial setting time, is (A) 0.70 P (B) 0.75 P (C) 0.80 P (D) 0.85 p

Description : If is the percentage of water required for normal consistency, water to be added for determination of initial setting time, is (A) 0.70 P (B) 0.75 P (C) 0.80 P (D) 0.85 p

Last Answer : Answer: Option D

What is the function of gypsum-binder in the investment:** A. Setting and hydroscopic B. Strength and rigidity

Description : What is the function of gypsum-binder in the investment:** A. Setting and hydroscopic B. Strength and rigidity

Last Answer : B. Strength and rigidity

For quality control of Portland cement, the test essentially done is (A) Setting time (B) Tensile strength (C) Consistency (D) All the above

Description : For quality control of Portland cement, the test essentially done is (A) Setting time (B) Tensile strength (C) Consistency (D) All the above

Last Answer : D

Le-Chatelier's device is used for determining the (A) Setting time of cement (B) Soundness of cement (C) Tensile strength of cement (D) Compressive strength of cement

Description : Le-Chatelier's device is used for determining the (A) Setting time of cement (B) Soundness of cement (C) Tensile strength of cement (D) Compressive strength of cement

Last Answer : Answer: Option B

The presence of lime in cement (a) Make s the cement sound and provides strength to the cement. (b) Prolong the setting time (c) Causes unsoundness in cement (d) All the above

Description : The presence of lime in cement (a) Make s the cement sound and provides strength to the cement. (b) Prolong the setting time (c) Causes unsoundness in cement (d) All the above

Last Answer : (a) Make s the cement sound and provides strength to the cement.

The deleterious materials present in the aggregate (a) Prevent normal hydration of cement (b) Reduce the strength and durability of concrete. (c) Modify the setting action and cause efloresecence. (d) All of the above

Description : The deleterious materials present in the aggregate (a) Prevent normal hydration of cement (b) Reduce the strength and durability of concrete. (c) Modify the setting action and cause efloresecence. (d) All of the above

Last Answer : (d) All of the above

Pick up the incorrect statement from the following. For performing compressive strength test of cement (A) Cement and standard sand mortar are used in the ratio of 1 : 3 (B) Water is added at the rate of (P/4) + 3.0 percentage of water where P is the percentage of water for standard consistency (C) A cube mould of 10 cm × 10 cm × 10 cm is used (D) The prepared moulds are kept in a atmosphere of 50% relative humidity

Description : Pick up the incorrect statement from the following. For performing compressive strength test of cement (A) Cement and standard sand mortar are used in the ratio of 1 : 3 (B) Water is added at the ... cm 10 cm is used (D) The prepared moulds are kept in a atmosphere of 50% relative humidity

Last Answer : Answer: Option A

For determining the compressive strength test on cement is, the percentage amount of water to be added as (Pa = Percentage of water for required consistency) [ A ] 0.25 Pa + 2.5 [ B ] 0.25 Pa + 3.5 [ C ] 0.35 Pa + 2.5 [ D ] 0.35 Pa + 3.5

Description : For determining the compressive strength test on cement is, the percentage amount of water to be added as (Pa = Percentage of water for required consistency) [ A ] 0.25 Pa + 2.5 [ B ] 0.25 Pa + 3.5 [ C ] 0.35 Pa + 2.5 [ D ] 0.35 Pa + 3.5

Last Answer : [ B ] 0.25 Pa + 3.5

My temp. is at 98.1, and i have chills. yesterday i had a fever of 100.4. then today after lowering it shot back up to 101 degrees. what does that mean?

Description : My temp. is at 98.1, and i have chills. yesterday i had a fever of 100.4. then today after lowering it shot back up to 101 degrees. what does that mean?

Last Answer : Are you taking medicine like ibuprofen or tylenol for the fever? Also, are you sick? Or you just have a fever?

Adiabatic heating and Adiabatic cooling really means _________ and _________ respectively.  a. raising the temp and lowering the temp  b. maintaining the pressure and changing the temperature  c. decreasing the volume and increasing the pressure  d. lowering the temp and raising the temp

Description : Adiabatic heating and Adiabatic cooling really means _________ and _________ respectively.  a. raising the temp and lowering the temp  b. maintaining the pressure and changing the temperature  c. decreasing the volume and increasing the pressure  d. lowering the temp and raising the temp

Last Answer : raising the temp and lowering the temp

Explain the method to determine initial and final setting time of cement.

Description : Explain the method to determine initial and final setting time of cement.

Last Answer : Procedure: i. Take 400 gm. of cement sample and add 0.85 times water required for its standard consistency to prepare homogenous cement paste. Note down the time at which water is added to cement as T1 min. ... a cement surface as T3 min. viii. Calculate final setting time i.e. FST = T3-T1 min.

The most commonly used admixture which prolongs the setting and hardening time is (A) Gypsum (B) Calcium chloride (C) Sodium silicate (D) All of the above

Description : The most commonly used admixture which prolongs the setting and hardening time is (A) Gypsum (B) Calcium chloride (C) Sodium silicate (D) All of the above

Last Answer : (A) Gypsum

Before constructing a dam, the factor to be considered for controlling sedimentation, is (A) Selection of dam site (B) Construction of check dams (C) Providing vegetation screens (D) All the above

Description : Before constructing a dam, the factor to be considered for controlling sedimentation, is (A) Selection of dam site (B) Construction of check dams (C) Providing vegetation screens (D) All the above

Last Answer : (D) All the above

The most common admixture which is used to accelerate the initial set of concrete is (A) Gypsum (B) Calcium chloride (C) Calcium carbonate (D) None of the above

Description : The most common admixture which is used to accelerate the initial set of concrete is (A) Gypsum (B) Calcium chloride (C) Calcium carbonate (D) None of the above

Last Answer : Answer: Option B

Ordinary Portland cement is manufactured from (A) Lime stone and clay (B) Gypsum and lime (C) Pozzolana (D) Lime, pozzolana and clay

Description : Ordinary Portland cement is manufactured from (A) Lime stone and clay (B) Gypsum and lime (C) Pozzolana (D) Lime, pozzolana and clay

Last Answer : Answer: Option B

Which one of the following is an air binding material? (A) Gypsum (B) Acid-resistant cement (C) Quick lime (D) All of these

Description : Which one of the following is an air binding material? (A) Gypsum (B) Acid-resistant cement (C) Quick lime (D) All of these

Last Answer : Answer: Option D

The most commonly used retarder in cement is (A) Gypsum (B) Calcium chloride (C) Calcium carbonate (D) None of the above

Description : The most commonly used retarder in cement is (A) Gypsum (B) Calcium chloride (C) Calcium carbonate (D) None of the above

Last Answer : Answer: Option A

The setting and hardening of cement after addition of water is due to a) Binding action of water b) Evaporation of water c) Hydration and hydrolysis of some constituent compounds of cement* d) Additional hardening compounds added to cement

Description : The setting and hardening of cement after addition of water is due to a) Binding action of water b) Evaporation of water c) Hydration and hydrolysis of some constituent compounds of cement* d) Additional hardening compounds added to cement

Last Answer : c) Hydration and hydrolysis of some constituent compounds of cement*

Which of the following accentuates clinkering troubles on furnace grate burning coal? (A) Low reactivity of carbonised residue containing high proportion of iron & sulphur (B) Low forced draft & fuel bed temperature (C) Thick firebed and preheated primary air (D) All (A), (B) and (C)

Description : Which of the following accentuates clinkering troubles on furnace grate burning coal? (A) Low reactivity of carbonised residue containing high proportion of iron & sulphur (B) Low forced draft & fuel bed temperature (C) Thick firebed and preheated primary air (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Which of the following accentuates clinkering trouble on furnace grate burning coal? (A) Low reactivity of carbonised residue containing high proportions of iron & sulphur (B) Low forced draught and fuel bed temperature (C) Thick fire bed and preheated primary air (D) All (A), (B) and (C)

Description : Which of the following accentuates clinkering trouble on furnace grate burning coal? (A) Low reactivity of carbonised residue containing high proportions of iron & sulphur (B) Low forced draught and fuel bed temperature (C) Thick fire bed and preheated primary air (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)