A passive two port network is in a steady state. Compared to its input, the steady state output can never offer

A passive two port network is in a steady state. Compared to its input, the steady state output can never offer 

A) Higher voltage B) Lower impedance C) Greater power D) Better regulation
by

1 Answer

Answer :

A passive two port network is in a steady state. Compared to its input, the steady state output can never offer Greater power

by

Related questions

A passive 2-port network is in a steady state, compared to its input, the steady state output can

Description : A passive 2-port network is in a steady state, compared to its input, the steady state output can never offer   (a) Higher voltage (b) Lower impedance (c) Greater power (d) Better regulation

Last Answer : A passive 2-port network is in a steady state, compared to its input, the steady state output can never offer Greater power

What is active and passive network?

Description : What is active and passive network?

Last Answer : Active network is a network which contain one or more than one EMF source. An active network consists of an active element like battery or transistor. Passive network is a ... contain any source of energy. Passive network consists of passive element like resistance, inductance and capacitance.

A passive network is one which contains?

Description : A passive network is one which contains?

Last Answer : A passive network is one which contains no source of e.m.f. in it.

Two port networks are connected in cascade. The parameters of the network are obtained by multiplying in individual

Description : Two port networks are connected in cascade. The parameters of the network are obtained by multiplying in individual

Last Answer : Two port networks are connected in cascade. The parameters of the network are obtained by multiplying in individual ABCD parameter matrix

Consider the following statement for a 2-port network

Description : Consider the following statement for a 2-port network  1. Z11 =Z22  2. h12 = h21  3.Y12 = -Y21 4.BC - AD = -1   then the network is reciprocal if and only if   (A) 1 and 2 are correct (B) 2 and 3 are correct (C) 3 and 4 are correct (D) 4 alone is correct.

Last Answer : Consider the following statement for a 2-port network  1. Z11 =Z22  2. h12 = h21  3.Y12 = -Y21 4.BC - AD = -1   then the network is reciprocal if and only if   (A) 1 and 2 are correct (B) 2 and 3 are correct (C) 3 and 4 are correct (D) 4 alone is correct.

Which of the following are known as the short circuit parameters of a 2- port network?

Description : Which of the following are known as the short circuit parameters of a 2- port network? (A) Z- parameters. (B) H- parameters. (C) Y- parameters. (D) A,B,C,D, parameters.

Last Answer : Which of the following are known as the short circuit parameters of a 2- port network? (A) Z- parameters. (B) H- parameters. (C) Y- parameters. (D) A,B,C,D, parameters.

A network is said to be under resonance when the voltage and the current at the network input terminals are

Description : A network is said to be under resonance when the voltage and the current at the network input terminals are (A) in phase (B) out of phase (C) in phase quadrature (D) in phase, and have equal magnitudes

Last Answer : A network is said to be under resonance when the voltage and the current at the network input terminals are in phase

A DC voltage source is connected across a series RLC circuit. Under steady-state conditions, the applied DC

Description : A DC voltage source is connected across a series RLC circuit. Under steady-state conditions, the applied DC voltage drops entirely across the

Last Answer : A DC voltage source is connected across a series RLC circuit. Under steady-state conditions, the applied DC voltage drops entirely across the C only

"Maximum power output is obtained from a network when the load resistance...

Description : "Maximum power output is obtained from a network when the load resistance is equal to the output resistance of the network as seen from the terminals of the load". The above statement is associated with?

Last Answer : "Maximum power output is obtained from a network when the load resistance is equal to the output resistance of the network as seen from the terminals of the load". The above statement is associated with Maximum power transfer theorem.

Two two-port networks are connected in cascade. The combination is to be represented as a single two-port

Description : Two two-port networks are connected in cascade. The combination is to be represented as a single two-port network. The parameters of the network are obtained by multiplying the individual a. z-parameter matrix b. h-parameter matrix c. y-parameter matrix d. ABCD-parameter matrix

Last Answer : A

8096 has ___ general purpose I/O ports, Port 2 includes ______ of the following i) two quasi-bidirectional I/O lines ii) two output lines iii) four input lines iv) open drain outputs a) 4, i, iv b) 6, ii, iii c) 4, i,ii,iii d) 6, i, ii, iv

Description : 8096 has ___ general purpose I/O ports, Port 2 includes ______ of the following i) two quasi-bidirectional I/O lines ii) two output lines iii) four input lines iv) open drain outputs a) 4, i, iv b) 6, ii, iii c) 4, i,ii,iii d) 6, i, ii, iv

Last Answer : c) 4, i,ii,iii

8096 has ___ general purpose I/O ports, Port 2 includes ______ of the following i) two quasi-bidirectional I/O lines ii) two output lines iii) four input lines iv) open drain outputs a) 4, i, iv b) 6, ii, iii c) 4, i,ii,iii d) 6, i, ii, iv

Description : 8096 has ___ general purpose I/O ports, Port 2 includes ______ of the following i) two quasi-bidirectional I/O lines ii) two output lines iii) four input lines iv) open drain outputs a) 4, i, iv b) 6, ii, iii c) 4, i,ii,iii d) 6, i, ii, iv

Last Answer : c) 4, i,ii,iii

Write a C language program to operate port 0 and port 2 as output port and port 1 and port 3 as input port.

Description : Write a C language program to operate port 0 and port 2 as output port and port 1 and port 3 as input port.

Last Answer : #include void main (void ) { unsigned char X,Y P0=0X00; // P0 as output port P2=0X00;// P2 as output port P1=0XFF;//P1 as input port P3=0XFF;// P3 as input port while(1) { X= P1; Y=P3; P0=X; P2=Y; }//end of while }//end of main

In the illustrated circuit, what is the phase relationship of the amplifier output compared to the input? EL-0022 A. 0° in-phase B. 180° out of phase C. phase angle of the input divided by power factor D. unable to determine without the value of the bias voltage

Description : In the illustrated circuit, what is the phase relationship of the amplifier output compared to the input? EL-0022 A. 0° in-phase B. 180° out of phase C. phase angle of the input divided by power factor D. unable to determine without the value of the bias voltage

Last Answer : Answer: B

Pick out the wrong statement. (A) For a first order consecutive reaction, a tubular flow reactor as compared to a stirred tank reactor provides higher overall selectivity(B) For an ideal mixed reactor at steady state, the exit stream has the samecomposition as fluid within the reactor and the space time is equivalent toholding time for constant density system(C) Plug flow reactor (PFR) is always smaller than mixed reactor for allpositive reaction orders for a particular duty(D) Reaction rate does not decrease appreciably as the reaction proceeds incase of an autocatalytic reaction

Description : Pick out the wrong statement. (A) For a first order consecutive reaction, a tubular flow reactor as compared to a stirred tank reactor provides higher overall selectivity(B) For an ideal ... D) Reaction rate does not decrease appreciably as the reaction proceeds in case of an autocatalytic reaction

Last Answer : (A) For a first order consecutive reaction, a tubular flow reactor as compared to a stirred tank reactor provides higher overall selectivity

The steady state stability limit as compared to the transient state stability limit is always

Description : The steady state stability limit as compared to the transient state stability limit is always

Last Answer : The steady state stability limit as compared to the transient state stability limit is always Greater

The transfer function of a system is 10/(1+s) when operating as a unity feedback system, the steady state error to a step input will be a) 0 b) 1/11 c) 10 d) Infinity

Description : The transfer function of a system is 10/(1+s) when operating as a unity feedback system, the steady state error to a step input will be a) 0 b) 1/11 c) 10 d) Infinity

Last Answer : Ans: 1/11

What is the steady state error of type-0 system for ramp input?

Description : What is the steady state error of type-0 system for ramp input?  A) ∞ B) A/K C) A/(1+K) D) 0

Last Answer : What is the steady state error of type-0 system for ramp input?  A) ∞ B) A/K C) A/(1+K) D) 0

In analog computer A) Input is first converted to digital form B) Input is never converted to digital form C) Output is displayed in digital form D) All of the above

Description : In analog computer A) Input is first converted to digital form B) Input is never converted to digital form C) Output is displayed in digital form D) All of the above

Last Answer : Answer : B

In analog computer a. Input is first converted to digital form b. Input is never converted to digital form c. Output is displayed in digital form d. All of above

Description : In analog computer a. Input is first converted to digital form b. Input is never converted to digital form c. Output is displayed in digital form d. All of above

Last Answer : All of above

In analog computer a. Input is first converted to digital form b. Input is never converted to digital form c. Output is displayed in digital form d. All of above

Description : In analog computer a. Input is first converted to digital form b. Input is never converted to digital form c. Output is displayed in digital form d. All of above

Last Answer : b. Input is never converted to digital form

In analog computer a. Input is first converted to digital form b. Input is never converted to digital form c. Output is displayed in digital form d. All of above

Description : In analog computer a. Input is first converted to digital form b. Input is never converted to digital form c. Output is displayed in digital form d. All of above

Last Answer : b. Input is never converted to digital form

A tree of a network graph consists of

Description : A tree of a network graph consists of (A) (n-1) nodes (B) n branches (C) one or two nodes left in isolated position (D) no closed paths 

Last Answer : The dual of a tree is sometimes called a maze Itconsists of spaces connected by links in the same way that the tree consists of nodes connected by treebranches. Duals cannot be formed for every graph. ... Consequently, only planar graphs have duals.

To find current in a resistance connected in a network, Thevenin's theorem is used VTH = 20 V and RTH = 5 Ω.

Description : To find current in a resistance connected in a network, Thevenin's theorem is used VTH = 20 V and RTH = 5 Ω. The current through the resistance: (1) is 4 A (2) is 4 A or less (3) is less than 4 A (4) May be 4 A or less or more than 4 A

Last Answer : To find current in a resistance connected in a network, Thevenin's theorem is used VTH = 20 V and RTH = 5 Ω. The current through the resistance: is less than 4 A 

Consider the star network shown in figure. The resistance between terminals A and B with C open is 6 ohms,

Description : Consider the star network shown in figure. The resistance between terminals A and B with C open is 6 ohms, between terminals B and C withAopen is 11 ohms and between terminals C andAwith B open is 9 ohms. Then RA, RB, RC respectively is 

Last Answer : Consider the star network shown in figure. The resistance between terminals A and B with C open is 6 ohms, between terminals B and C withAopen is 11 ohms and between terminals C andAwith B open is 9 ohms. Then RA, RB, RC respectively is  2, 4,7

As a network contains only independent current sources and resistors then if the values of all resistors are

Description : As a network contains only independent current sources and resistors then if the values of all resistors are doubled then the values of the node voltages are   (A) will become half (B) will ... (D) cannot be determined unless the circuit configuration and the values of the resistors are known.

Last Answer : As a network contains only independent current sources and resistors then if the values of all resistors are doubled then the values of the node voltages are will become double 

When the graph of a network has six branches with three tree branches then the minimum number of

Description : When the graph of a network has six branches with three tree branches then the minimum number of equations required for the solution of the network is   (A) 2 (B) 3 (C) 4 (D) 5

Last Answer : When the graph of a network has six branches with three tree branches then the minimum number of equations required for the solution of the network is 3 

With n nodes and b branches a network will have

Description : With n nodes and b branches a network will have   (A) (b+n) links (B) b - n +1 links (C) b -n-1 links (D) b + n + 1 links 

Last Answer : With n nodes and b branches a network will have  b - n +1 links

Which of the following theorems can be applied to any network linear or non-linear, active or

Description : Which of the following theorems can be applied to any network linear or non-linear, active or passive, time variant or time invariant?   (a) Thevenin Theorem (b) Norton Theorem (c) Telligen Theorem (d) Superposition Theorem 

Last Answer : Which of the following theorems can be applied to any network linear or non-linear, active or passive, time variant or time invariant? (a) Thevenin Theorem (b) Norton Theorem (c) Telligen Theorem (d) Superposition Theorem 

If the number of branches in a network is 'B', the number of nodes is 'N' and the number of

Description :  If the number of branches in a network is 'B', the number of nodes is 'N' and the number of dependent loops is 'L', then the number of independent node equations will be  (a) N+L–1 (b) B–1 (c) B–N (d) N–1 

Last Answer : N+l-

The number of independent loops for a network with n nodes and b branches is

Description : The number of independent loops for a network with n nodes and b branches is

Last Answer : The number of independent loops for a network with n nodes and b branches is b-n+1

A network contains linear resistors and ideal voltage sources. If values of all the resistors are doubled then the

Description : A network contains linear resistors and ideal voltage sources. If values of all the resistors are doubled then the voltage across each resistor will

Last Answer : A network contains linear resistors and ideal voltage sources. If values of all the resistors are doubled then the voltage across each resistor will not change

The number of independent equations to solve a network is equal to?

Description : The number of independent equations to solve a network is equal to?

Last Answer : The number of independent equations to solve a network is equal to the number of chords.

A closed path made by several branches of the network is known as?

Description : A closed path made by several branches of the network is known as?

Last Answer : A closed path made by several branches of the network is known as loop.

A network which contains one or more than one source of e.m.f. is known as?

Description : A network which contains one or more than one source of e.m.f. is known as?

Last Answer : Active 

A non-linear network does not satisfy?

Description : A non-linear network does not satisfy?

Last Answer : A non-linear network does not satisfy both homogeneity as well as superposition condition.

"In any network containing more than one sources of e.m.f. the current in any branch is the algebraic ...

Description : "In any network containing more than one sources of e.m.f. the current in any branch is the algebraic sum of a number of individual fictitious currents (the number being equal ... are equal to the internal resistances of the respective sources". The above statement is associated with?

Last Answer : "In any network containing more than one sources of e.m.f. the current in any branch is the algebraic sum of a number of individual fictitious currents (the number ... to the internal resistances of the respective sources". The above statement is associated with Superposition theorem.

_________ is an artificial neural network with multiple hidden layers between the input and output layers? (A) Deep neural network (B) Shallow neural network (C) Both(A) & (B) (D) None of the Above

Description : _________ is an artificial neural network with multiple hidden layers between the input and output layers? (A) Deep neural network (B) Shallow neural network (C) Both(A) & (B) (D) None of the Above

Last Answer : (A) Deep neural network

The network that involves backward links from output to the input and hidden layers is called _________ a) Self organizing maps b) Perceptrons c) Recurrent neural network d) Multi layered perceptron

Description : The network that involves backward links from output to the input and hidden layers is called _________ a) Self organizing maps b) Perceptrons c) Recurrent neural network d) Multi layered perceptron

Last Answer : c) Recurrent neural network

Thermal efficiency is the ratio of:  A. Network input to total heat input  B. Network output to total heat output  C. Network output to total heat input  D. Network input to total heat output

Description : Thermal efficiency is the ratio of:  A. Network input to total heat input  B. Network output to total heat output  C. Network output to total heat input  D. Network input to total heat output

Last Answer : Network output to total heat input

The network that involves backward links from output to the input and hidden layers is called as ____. a) Self organizing maps b) Perceptrons c) Recurrent neural network d) Multi layered perceptron

Description : The network that involves backward links from output to the input and hidden layers is called as ____. a) Self organizing maps b) Perceptrons c) Recurrent neural network d) Multi layered perceptron

Last Answer : c) Recurrent neural network

A linear network has a current input 4cos(ω t + 20º)A and a voltage output 10 cos(ωt +110º) V. Determine the associated impedance.

Description : A linear network has a current input 4cos(ω t + 20º)A and a voltage output 10 cos(ωt +110º) V. Determine the associated impedance.

Last Answer : Solution

As shown in the illustration, the circuit which 'shapes' the linear output of the thrust lever so that the steady-state ship speed is linear with respect to that lever's setting is the _____________. EL-0095 A. 'pitch controller' B. 'error amplifier' C. 'function generator' D. 'servo amplifier'

Description : As shown in the illustration, the circuit which 'shapes' the linear output of the thrust lever so that the steady-state ship speed is linear with respect to that lever's setting is the _____________. EL-0095 A. 'pitch controller' B. 'error amplifier' C. 'function generator' D. 'servo amplifier'

Last Answer : Answer: C

Steady state output i-v characteristics of a MOSFET

Last Answer : Steady state output i-v characteristics of a MOSFET   The MOSFET, like the BJT is a three terminal device where the voltage on the gate terminal controls the flow of current between the ... Distributed under Creative Commons Attribution-ShareAlike - CC BY-SA. Version 2 EE IIT, Kharagpur

Gyratory crushers compared to the reciprocating jaw crushers (A) Have greater capacity per unit of discharge area (B) Crush intermittently (C) Are less suitable for coarse materials (D) Have less steady power consumption

Description : Gyratory crushers compared to the reciprocating jaw crushers (A) Have greater capacity per unit of discharge area (B) Crush intermittently (C) Are less suitable for coarse materials (D) Have less steady power consumption

Last Answer : (A) Have greater capacity per unit of discharge area

For a feedback control system of type 2, the steady error for a rap input is

Description : For a feedback control system of type 2, the steady error for a rap input is  A) Infinite B) Constant C) Zero D) Indeterminate

Last Answer : For a feedback control system of type 2, the steady error for a rap input is Zero 

The 'E/P converter' shown in the illustration receives a _____________. EL-0096 A. steady pressure signal and produces a programmed electrical output B. variable electrical signal and produces a corresponding pressure output C. steady electrical signal and produces an inverse temperature correction D. variable pressure signal and produces a corresponding electrical output

Description : The 'E/P converter' shown in the illustration receives a _____________. EL-0096 A. steady pressure signal and produces a programmed electrical output B. variable electrical signal ... an inverse temperature correction D. variable pressure signal and produces a corresponding electrical output

Last Answer : Answer: B

A security audit performed on the internal network of an organization by the network administration is also known as ___________. a. Grey-box testing b. Black-box testing c. White-box testing d. Active testing E. Passive testing

Description : A security audit performed on the internal network of an organization by the network administration is also known as ___________. a. Grey-box testing b. Black-box testing c. White-box testing d. Active testing E. Passive testing

Last Answer : c. White-box testing

A security audit performed on the internal network of an organization by the network administration is also known as ___________. A. Grey-box testing B. Black-box testing C. White-box testing D. Active testing E. Passive testing

Description : A security audit performed on the internal network of an organization by the network administration is also known as ___________. A. Grey-box testing B. Black-box testing C. White-box testing D. Active testing E. Passive testing

Last Answer : C. White-box testing

A security audit performed on the internal network of an organization by the network administration is also known as ___________. ∙ A. Grey-box testing ∙ B. Black-box testing ∙ C. White-box testing ∙ D. Active testing ∙ E. Passive testing

Description : A security audit performed on the internal network of an organization by the network administration is also known as ___________. ∙ A. Grey-box testing ∙ B. Black-box testing ∙ C. White-box testing ∙ D. Active testing ∙ E. Passive testing

Last Answer : C. White-box testing