The X/R ratio for distribution lines is:

The X/R ratio for distribution lines is:
by

2 Answers

Answer :

The X/R ratio for distribution lines is: more than unity

by

Answer :

Inductance and resistance
by

Related questions

____are the conductors, which connect the consumer's terminals to the distribution.

Last Answer : Service mains are the conductors, which connect the consumer's terminals to the distribution.

What is electric power generation transmission and distribution?

Description : What is electric power generation transmission and distribution?

Last Answer : Generation: it wrong word at here.because it is no generation it is conversion of one form of energy into electrical form.it may by using any type of energy. Transmission is just to ... place to other by providing some modifications And distribution means use of this energy for any purpose.

What is the standard length of medium and long Transmission lines?

Last Answer : • Short line approximation for lines that are less than 80 km long.  • Medium line approximation for lines whose lengths are between 80 km to 250 km.  • Long line model for lines that are longer than 250 km.  

Series capacitors on transmission lines are of little use when the load VAR requirement is?

Last Answer : Series capacitors on transmission lines are of little use when the load VAR requirement is small.

Why ACSR conductor is used for overhead lines?

Description : Why ACSR conductor is used for overhead lines?

Last Answer : It has high tensile strength 

Distribution lines in India generally use (a) wooden poles (b) R.C.C. poles (c) steel towers (d) none of the above

Description : Distribution lines in India generally use (a) wooden poles (b) R.C.C. poles (c) steel towers (d) none of the above

Last Answer : (b) R.C.C. poles

Distribution lines in India generally use (a) wooden poles (b) R.C.C. poles (c) steel towers (d) none of the above

Description : Distribution lines in India generally use (a) wooden poles (b) R.C.C. poles (c) steel towers (d) none of the above

Last Answer : (b) R.C.C. poles

For a 66 kV line having span of 200 meters between towers the approximate sag will be 2 m. If the span is

Description : For a 66 kV line having span of 200 meters between towers the approximate sag will be 2 m. If the span is double the sag will be:  (A) 1 m (B) 2 m (C) 4m (D) 8m

Last Answer : For a 66 kV line having span of 200 meters between towers the approximate sag will be 2 m. If the span is double the sag will be: 8m

The voltage regulation in magnetic amplifier type voltage regulator is effected by?

Last Answer : The voltage regulation in magnetic amplifier type voltage regulator is effected by varying the reactance.

When a conductor carries more current on the surface as compared to core, it is due to?

Last Answer : When a conductor carries more current on the surface as compared to core, it is due to skin effect.

Overhead system can be designed for operation up to?

Last Answer : Overhead system can be designed for operation up to 400 kV.

The underground system cannot be operated above?

Last Answer : The underground system cannot be operated above 66 kV.

Is Aluminium a good conductor of electricity?

Description : Is Aluminium a good conductor of electricity?

Last Answer : Yes aluminium is a conductor and it is a good conductor of electricity. But copper have better conductivity as compare to aluminium.

What is ACCC wire?

Description : What is ACCC wire?

Last Answer : Aluminum Conductor Composite Core

What is the full form of ACSR?

Description : What is the full form of ACSR?

Last Answer : Aluminum conductor steel rainforce

according to ohms law voltage directly proportional to current but it is reverse in transformer why?

Description : About trnsformer

Last Answer : Acc to Ohms law V=IR but it is only applicable when our resistance R is constant, as in case of transformer we take impedence which is equivalent to resistance is not constant it varies with system parameters that why Ohms law not applicable in case of transformer

Where should the lighting arrestor is placed in distribution lines?

Description : Where should the lighting arrestor is placed in distribution lines?

Last Answer : Near distribution transformers and out going feeders of 11kv and incoming feeder of 33kv and near power transformers in sub-stations.

Where should the lighting arrestor be placed in distribution lines?

Description : Where should the lighting arrestor be placed in distribution lines?

Last Answer : A:Near distribution transformers and out going feeders of 11kv and incomming feeder of 33kv and near power transformers in sub-stations.

Where are the lighting arrestors placed in distribution lines?

Description : Where are the lighting arrestors placed in distribution lines?

Last Answer : Near distribution transformers and outgoing feeders of 11kv and incoming feeder of 33kv and near power transformers in sub-stations.

Wrought iron is not (A) Ductile & resistant to corrosion/rusting (B) Weldable easily (C) Having uniform strength in all directions (D) Having maximum tensile strength along the lines of slag distribution

Description : Wrought iron is not (A) Ductile & resistant to corrosion/rusting (B) Weldable easily (C) Having uniform strength in all directions (D) Having maximum tensile strength along the lines of slag distribution

Last Answer : Option C

The ________ of the product mix refers to how closely related the various product lines are in end use, production requirements, distribution channels, or some other way. A. Consistency B. Depth C. Width D. Length

Description : The ________ of the product mix refers to how closely related the various product lines are in end use, production requirements, distribution channels, or some other way. A. Consistency B. Depth C. Width D. Length

Last Answer : A. Consistency

Anderson Distribution Company management has purchased fifteen fork-lifts in three orders over the past two years. As it plans to place its next order for another five machines, management wonders if additional features may be needed due to expansion in the product lines it carries. For Anderson, this represents a ________ purchase. A)new-task B)modified rebuy C)straight rebuy D)repetitive purchase

Description : Anderson Distribution Company management has purchased fifteen fork-lifts in three orders over the past two years. As it plans to place its next order for another five machines, management wonders if ... a ________ purchase. A)new-task B)modified rebuy C)straight rebuy D)repetitive purchase

Last Answer : B)modified rebuy

Let S be the set of circles `x^(2)+y^(2)=r^(2)" for "r=1,` 2 and 3 and T be the set of lines `y= x+ksqrt(2)" for "k=0, ne 1 and pm 2`. Find the number

Description : Let S be the set of circles `x^(2)+y^(2)=r^(2)" for "r=1,` 2 and 3 and T be the set of lines `y= x+ksqrt(2)" for "k=0, ne 1 and pm 2`. Find the number

Last Answer : Let S be the set of circles `x^(2)+y^(2)=r^(2)" for "r=1,` 2 and 3 and T be ... of distinct points of intersection of the graphs of set S and T.

For an infinite sheet of positive charge, the electric field lines: w) run parallel to the sheet of charge x) are perpendicular to the sheet of charge and point in toward the sheet y) are perpendicular to the sheet of charge and point away from the sheet z) fall off as one over r squared

Description : For an infinite sheet of positive charge, the electric field lines: w) run parallel to the sheet of charge x) are perpendicular to the sheet of charge and point in toward the sheet y) are perpendicular to the sheet of charge and point away from the sheet z) fall off as one over r squared

Last Answer : ANSWER: Y -- ARE PERPENDICULAR TO THE SHEET OF CHARGE AND POINT AWAY  

The ratio of the areas of the two triangles formed by the lines representing the equations and 2x – y + 2 = 0 with X axis and the lines with the Y axis is (a) 1 : 2 (b) 2 : 1 (c) 4 : 1 (d) 1 : 4

Description : The ratio of the areas of the two triangles formed by the lines representing the equations and 2x – y + 2 = 0 with X axis and the lines with the Y axis is (a) 1 : 2 (b) 2 : 1 (c) 4 : 1 (d) 1 : 4

Last Answer : (c) 4 : 1

. The ratio of the areas of the two triangles formed by the lines representing the equations and 2x – y + 2 = 0 with X axis and the lines with the Y axis is (a) 1 : 2 (b) 2 : 1 (c) 4 : 1 (d) 1 : 4

Description : . The ratio of the areas of the two triangles formed by the lines representing the equations and 2x – y + 2 = 0 with X axis and the lines with the Y axis is (a) 1 : 2 (b) 2 : 1 (c) 4 : 1 (d) 1 : 4

Last Answer : (c) 4 : 1

In case of laminar flow of fluid through a circular pipe, the (A) Shear stress over the cross-section is proportional to the distance from the surface of the pipe (B) Surface of velocity distribution is a paraboloid of revolution, whose volume equals half the volume of circumscribing cylinder (C) Velocity profile varies hyperbolically and the shear stress remains constant over the cross-section (D) Average flow occurs at a radial distance of 0.5 r from the centre of the pipe (r = pipe radius)

Description : In case of laminar flow of fluid through a circular pipe, the (A) Shear stress over the cross-section is proportional to the distance from the surface of the pipe (B) Surface of velocity distribution is a ... occurs at a radial distance of 0.5 r from the centre of the pipe (r = pipe radius)

Last Answer : (B) Surface of velocity distribution is a paraboloid of revolution, whose volume equals half the volume of circumscribing cylinder

The type of pipe commonly used in water supply distribution schemes, is (A) R.C.C. pipes (B) Hume pipes (C) Cast iron pipes (D) G.I. pipes

Description : The type of pipe commonly used in water supply distribution schemes, is  (A) R.C.C. pipes  (B) Hume pipes  (C) Cast iron pipes  (D) G.I. pipes

Last Answer : (C) Cast iron pipes

In a R.C section under flexure, the assumption that “a plane section before bending remains plane after bending” leads to (a) Strain distribution being linear across the depth (b) Stress distribution being linear across the depth (c) Both stress and strain distribution being linear across the depth (d) Shear stress distribution being uniform along the depth

Description : In a R.C section under flexure, the assumption that a plane section before bending remains plane after bending leads to (a) Strain distribution being linear across the depth (b) ... strain distribution being linear across the depth (d) Shear stress distribution being uniform along the depth

Last Answer : (a) Strain distribution being linear across the depth

when the biconditional statement is separated into a conditional and its converse which of these cannot be the converse Biconditional: Lines r coplanar if and only if they lie in the same plane.?

Description : when the biconditional statement is separated into a conditional and its converse which of these cannot be the converse Biconditional: Lines r coplanar if and only if they lie in the same plane.?

Last Answer : Biconditional: Lines r coplanar if and only if they lie in the same plane. Conditional: If lines are coplanar then they lie in the same plane.

Hydrogen atom electron is excited to n = 4 state , in the spectrum of emitted radiation , number of lines in the ultravoilet and visible regions are r

Description : Hydrogen atom electron is excited to n = 4 state , in the spectrum of emitted radiation , number of lines in the ultravoilet and visible regions are r

Last Answer : Hydrogen atom electron is excited to n = 4 state , in the spectrum of emitted radiation , number of lines in the ... 1 , 3 C. 2 , 3 D. 3 , 2

4. A three-phase, four-wire system having \( 250 V \) line-to-neutral has the following loads connected between the respective lines and the neutral. Calculate the current in the neutral wire?\[Z_{R}=20 \angle 0^{\circ} \Omega ; Z_{Y}=20 \angle 35^{\circ} \Omega, Z_{B}=20 \angle-55^{\circ} \Omega\](10M)

Description : 4. A three-phase, four-wire system having \( 250 V \) line-to-neutral has the following loads connected between the respective lines and the neutral. Calculate the current in the neutral wire?\[Z_{R}=20 \angle 0^{\circ} ... Z_{Y}=20 \angle 35^{\circ} \Omega, Z_{B}=20 \angle-55^{\circ} \Omega\](10M)

Last Answer : 4. A three-phase, four-wire system having \( 250 V \) line-to-neutral has the following loads connected ... =20 \angle-55^{\circ} \Omega \] (10M)

4. A three-phase, four-wire system having \( 250 V \) line-to-neutral has the following loads connected between the respective lines and the neutral. Calculate the current in the neutral wire?\[Z_{R}=20 \angle 0^{\circ} \Omega ; Z_{Y}=20 \angle 35^{\circ} \Omega, Z_{B}=20 \angle-55^{\circ} \Omega\](10M)

Description : 4. A three-phase, four-wire system having \( 250 V \) line-to-neutral has the following loads connected between the respective lines and the neutral. Calculate the current in the neutral wire?\[Z_{R}=20 \angle 0^{\circ} ... Z_{Y}=20 \angle 35^{\circ} \Omega, Z_{B}=20 \angle-55^{\circ} \Omega\](10M)

Last Answer : 4. A three-phase, four-wire system having \( 250 V \) line-to-neutral has the following loads connected ... =20 \angle-55^{\circ} \Omega \] (10M)

4. A three-phase, four-wire system having \( 250 V \) line-to-neutral has the following loads connected between the respective lines and the neutral. Calculate the current in the neutral wire?\[Z_{R}=20 \angle 0^{\circ} \Omega ; Z_{Y}=20 \angle 35^{\circ} \Omega, Z_{B}=20 \angle-55^{\circ} \Omega\](10M)

Description : 4. A three-phase, four-wire system having \( 250 V \) line-to-neutral has the following loads connected between the respective lines and the neutral. Calculate the current in the neutral wire?\[Z_{R}=20 \angle 0^{\circ} ... Z_{Y}=20 \angle 35^{\circ} \Omega, Z_{B}=20 \angle-55^{\circ} \Omega\](10M)

Last Answer : 4. A three-phase, four-wire system having \( 250 V \) line-to-neutral has the following loads connected ... =20 \angle-55^{\circ} \Omega \] (10M)

Calculate the Rydberg constant `R` if `He^(+)` ions are known to have the wavelength difference between the first (of the longest wavelength) lines of

Description : Calculate the Rydberg constant `R` if `He^(+)` ions are known to have the wavelength difference between the first (of the longest wavelength) lines of

Last Answer : Calculate the Rydberg constant `R` if `He^(+)` ions are known to have the wavelength difference between ... series equal to `Delta lambda = 133.7nm`.

The lines having R, L, C distributed along the circuit are called a) Lumped b) Distributed c) Parallel d) Paired

Description : The lines having R, L, C distributed along the circuit are called a) Lumped b) Distributed c) Parallel d) Paired

Last Answer : Ans: B

Assertion (A):A pair of linear equations has no solution (s) if it represented by intersecting lines graphically. Reason (R) : If the pair of lines are intersecting, then the pair has unique solution and is called consistent pair of equations. (a) Both A and R are correct; R is the correct explanation of A. (b) Both A and R are correct; R is not the correct explanation of A. (c) A is correct; R is incorrect. (d) R is correct; A is incorrect.

Description : Assertion (A):A pair of linear equations has no solution (s) if it represented by intersecting lines graphically. Reason (R) : If the pair of lines are intersecting, then the pair has unique solution and is called ... of A. (c) A is correct; R is incorrect. (d) R is correct; A is incorrect.

Last Answer : (d) R is correct; A is incorrect.

In transmission lines the crossarms are made of (a) copper (b) wood (c) R.C.C. (d) steel

Description : In transmission lines the crossarms are made of (a) copper (b) wood (c) R.C.C. (d) steel

Last Answer : (d) steel

Overhead lines generally use (a) copper conductors (b) all aluminium conductors (c) A.C.S.R. conductors (d) none of these

Description : Overhead lines generally use (a) copper conductors (b) all aluminium conductors (c) A.C.S.R. conductors (d) none of these

Last Answer : (c) A.C.S.R. conductors

Which command is used to sort the lines of data in a file in reverse order A. sort B. sh C. st D. sort -r E. None of the above

Description : Which command is used to sort the lines of data in a file in reverse order A. sort B. sh C. st D. sort -r E. None of the above

Last Answer : D. sort -r

In transmission lines the cross-arms are made of (a) copper (b) wood (c) R.C.C. (d) steel

Description : In transmission lines the cross-arms are made of (a) copper (b) wood (c) R.C.C. (d) steel

Last Answer : (d) steel

Let R be the rectangular window against which the lines are to be clipped using 2D Sutherland-Cohen line clipping algorithm. The rectangular window has lower left-hand corner at (-5,1) and upper righthand corner at (3,7). Consider the following three lines for clipping with the given end point co-ordinates: Line AB: A(-6,2) and B(-1,8) Line CD: C(-1,5) and D(4,8) Line EF: E(-2,3) and F(1,2) Which of the following line(s) is/are candidate for clipping? (A) AB (B) CD (C) EF (D) AB and CD

Description : Let R be the rectangular window against which the lines are to be clipped using 2D Sutherland-Cohen line clipping algorithm. The rectangular window has lower left-hand corner at (-5,1) and upper righthand corner at (3,7). ... s) is/are candidate for clipping? (A) AB (B) CD (C) EF (D) AB and CD

Last Answer : (D) AB and CD

What is the ratio of displacement thickness to nominal thickness for a linear distribution of velocity in the boundary layer on a flat plate? (A) 0.5 (B) 1 (C) 1.5 (D) 2

Description : What is the ratio of displacement thickness to nominal thickness for a linear distribution of velocity in the boundary layer on a flat plate? (A) 0.5 (B) 1 (C) 1.5 (D) 2

Last Answer : (A) 0.5

A solute distributes itself between two non-miscible solvents in contact with each other in such a way that, at a constant temperature, the ratio of its concentrations in two layers is constant, irrespective of its total amount". This is (A) The distribution law (B) Followed from Margules equation (C) A corollary of Henry's law (D) None of these

Description : A solute distributes itself between two non-miscible solvents in contact with each other in such a way that, at a constant temperature, the ratio of its concentrations in two layers is constant, irrespective of ... B) Followed from Margules equation (C) A corollary of Henry's law (D) None of these

Last Answer : (A) The distribution law

Which of the following is expenses ratio? (a) Administrative expenses ratio (b) Selling and Distribution expenses ratio (c) Factory expenses ratio (d) Finance Expenses ratio A. A, B and D B. A, C and D C. A, B and C D. A, B , C, D

Description : Which of the following is expenses ratio? (a) Administrative expenses ratio (b) Selling and Distribution expenses ratio (c) Factory expenses ratio (d) Finance Expenses ratio A. A, B and D B. A, C and D C. A, B and C D. A, B , C, D

Last Answer : D. A, B , C, D

Enlist drawbacks of carbureted (SI) Engine on the basis of emission fuel Consumption, Air fuel ratio and fuel distribution.

Description : Enlist drawbacks of carbureted (SI) Engine on the basis of emission fuel Consumption, Air fuel ratio and fuel distribution.

Last Answer : Drawbacks of carbureted (SI) Engine. Parameter Drawbacks Emission Does not meet emission Norms Fuel consumption Due to absence of throttling specific fuel consumption is ... distribution of charge. Fuel distribution for each cylinder is not equal for multi cylinder engine.

In a large random data set following normal distribution, the ratio (%) of number of data points which are in the range of (mean ± standard deviation) to the total number of data points, is (A) ~ 50% (B) ~ 67% (C) ~ 97% (D) ~ 47%

Description : In a large random data set following normal distribution, the ratio (%) of number of data points which are in the range of (mean ± standard deviation) to the total number of data points, is (A) ~ 50% (B) ~ 67% (C) ~ 97% (D) ~ 47%

Last Answer : Answer: B

In a 3-insulator string voltage distribution system the ratio of capacitance between pin and earth to the self...

Description : In a 3-insulator string voltage distribution system the ratio of capacitance between pin and earth to the self capacitance of each unit is 1/4. If the potential across the top unit is 8 kV, then the string voltage is (A) 22.5 kV (B) 24 kV (C) 26 kV (D) 32.5 kV

Last Answer : In a 3-insulator string voltage distribution system the ratio of capacitance between pin and earth to the self capacitance of each unit is 1/4. If the potential across the top unit is 8 kV, then the string voltage is 32.5 kV