Trickle charger of a storage battery helps to A. Maintain proper electrolyte level B. Increase its reverse capacity C. Prevent sulphation D. Keep it fresh and fully charged

Trickle charger of a storage battery helps to
A. Maintain proper electrolyte level
B. Increase its reverse capacity
C. Prevent sulphation
D. Keep it fresh and fully charged
by

1 Answer

Answer :

D. Keep it fresh and fully charged
by

Related questions

On over charging a battery A. It will bring about chemical change in active materials B. It will increase the capacity of the battery C. It will raise the specific gravity of the electrolyte D. None of the above

Description : On over charging a battery A. It will bring about chemical change in active materials B. It will increase the capacity of the battery C. It will raise the specific gravity of the electrolyte D. None of the above

Last Answer : D. None of the above

Which of the listed battery charging circuits is used to maintain a wet-cell, lead-acid, storage battery in a fully charged state during long periods of disuse? A. Normal charging circuit B. Quick charging circuit C. Trickle charging circuit D. High ampere charging circuit

Description : Which of the listed battery charging circuits is used to maintain a wet-cell, lead-acid, storage battery in a fully charged state during long periods of disuse? A. Normal charging circuit B. Quick charging circuit C. Trickle charging circuit D. High ampere charging circuit

Last Answer : Answer: C

In accordance with Coast Guard Regulations (46 CFR), each battery operated relay-controlled lantern must _____________. A. be readily portable B. contain a dry cell battery having a minimum capacity of 10 amp hours C. have an automatic battery charger to maintain the battery in a fully charged state D. all of the above

Description : In accordance with Coast Guard Regulations (46 CFR), each battery operated relay-controlled lantern must _____________. A. be readily portable B. contain a dry cell battery having a minimum capacity of ... automatic battery charger to maintain the battery in a fully charged state D. all of the above

Last Answer : Answer: C

A lead-acid battery is considered fully charged when the ______________. A. electrolyte gasses freely B. battery charger ammeter indicates a positive reading C. terminal voltage reaches a constant value at a given temperature D. specific gravity of all cells reaches the correct value and no longer increases over a period of 1 to 4 hours

Description : A lead-acid battery is considered fully charged when the ______________. A. electrolyte gasses freely B. battery charger ammeter indicates a positive reading C. terminal voltage reaches a constant value at a ... cells reaches the correct value and no longer increases over a period of 1 to 4 hours

Last Answer : Answer: D

The open circuit voltage of any storage cell depends wholly upon A. Its chemical constituents B. On the strength of its electrolyte C. Its temperature D. All of the above

Description : The open circuit voltage of any storage cell depends wholly upon A. Its chemical constituents B. On the strength of its electrolyte C. Its temperature D. All of the above

Last Answer : D. All of the above

The output voltage of a charger is A] less than the battery voltage B] Higher than the battery voltage C] The same as the battery voltage D] None of the above

Description : The output voltage of a charger is A] less than the battery voltage B] Higher than the battery voltage C] The same as the battery voltage D] None of the above

Last Answer : B] Higher than the battery voltage

How to increase the range on electric vehicles? a. By increasing the battery capacity. b. By reducing battery capacity. c. By installing a turbocharger. d. By installing another DC motor.

Description : How to increase the range on electric vehicles? a. By increasing the battery capacity. b. By reducing battery capacity. c. By installing a turbocharger. d. By installing another DC motor.

Last Answer : a. By increasing the battery capacity.

In the illustration, the chemical reaction depicted indicates that the _________. EL-0061 A. battery is being charged at a high rate B. cell is short circuited C. cell is discharging D. battery is attached to a trickle charger

Description : In the illustration, the chemical reaction depicted indicates that the _________. EL-0061 A. battery is being charged at a high rate B. cell is short circuited C. cell is discharging D. battery is attached to a trickle charger

Last Answer : Answer: C

Each cell has a vent cap A. To allow gases out when the cell is on charge B. To add water to the cell if needed C. To check the level of electrolyte D. To do all above functions

Description : Each cell has a vent cap A. To allow gases out when the cell is on charge B. To add water to the cell if needed C. To check the level of electrolyte D. To do all above functions

Last Answer : D. To do all above functions

Ampere hour capacity of an industrial battery is based on ……….hours discharge rate A. 8 B. 12 C. 16 D. 24

Description : Ampere hour capacity of an industrial battery is based on ……….hours discharge rate A. 8 B. 12 C. 16 D. 24

Last Answer : A. 8

The capacity of a battery is expressed in terms of A. Current rating B. Voltage rating C. Ampere hour rating D. None of the above

Description : The capacity of a battery is expressed in terms of A. Current rating B. Voltage rating C. Ampere hour rating D. None of the above

Last Answer : C. Ampere hour rating

The charging time depends on which of the following factor? • Battery size • Battery capacity Size of vehicle • Voltage of batery

Description : The charging time depends on which of the following factor? • Battery size • Battery capacity Size of vehicle • Voltage of batery

Last Answer : • Battery capacity

The capacity of a battery is expressed in terms of A ampere per hour B current C volt D ampere

Description : The capacity of a battery is expressed in terms of A ampere per hour B current C volt D ampere

Last Answer : A ampere per hour

To prevent local action in battery, only …………is used in electrolytes A. Pump water B. Distilled water C. Tap water D. Both A and C

Description : To prevent local action in battery, only …………is used in electrolytes A. Pump water B. Distilled water C. Tap water D. Both A and C

Last Answer : B. Distilled water

Under normal conditions, storage batteries used for starting the emergency diesel generator are maintained in a charged state by which of the following methods? A. Trickle charging B. Fast charging C. Equalizing charge D. Reverse charging

Description : Under normal conditions, storage batteries used for starting the emergency diesel generator are maintained in a charged state by which of the following methods? A. Trickle charging B. Fast charging C. Equalizing charge D. Reverse charging

Last Answer : Answer: A

A dead storage battery can be revived by A. Adding distilled water B. Adding so-called battery restorer C. A dose of H2SO4 D. None of the above

Description : A dead storage battery can be revived by A. Adding distilled water B. Adding so-called battery restorer C. A dose of H2SO4 D. None of the above

Last Answer : D. None of the above

The storage battery generally used in electric power station is A. Nickel-cadmium battery B. Zinc carbon battery C. Lead-acid battery D. None of the above

Description : The storage battery generally used in electric power station is A. Nickel-cadmium battery B. Zinc carbon battery C. Lead-acid battery D. None of the above

Last Answer : C. Lead-acid battery

The storage battery generally used in electric power station is A] nickel-cadmium battery B] zinc-carbon battery C] lead-acid battery D] None of the above

Description : The storage battery generally used in electric power station is A] nickel-cadmium battery B] zinc-carbon battery C] lead-acid battery D] None of the above

Last Answer : C] lead-acid battery

A stable interface between solid _________ liquid ____________ and gaseous ___________ promotes high rate of electrode processes. a) Fuel, electrolyte, electrode b) Electrode, fuel, electrolyte c) Electrode, electrolyte, fuel d) Fuel, electrode, electrolyte

Description : A stable interface between solid _________ liquid ____________ and gaseous ___________ promotes high rate of electrode processes. a) Fuel, electrolyte, electrode b) Electrode, fuel, electrolyte c) Electrode, electrolyte, fuel d) Fuel, electrode, electrolyte

Last Answer : c) Electrode, electrolyte, fuel

Full form of BASE is _____. • Basic Analysis and Security Engine. • Biefield Academic Search Engine. • Basel Agency for Sustainable Energy. • Beta-Aluminium Solid Electrolyte.

Description : Full form of BASE is _____. • Basic Analysis and Security Engine. • Biefield Academic Search Engine. • Basel Agency for Sustainable Energy. • Beta-Aluminium Solid Electrolyte.

Last Answer : • Beta-Aluminium Solid Electrolyte.

Average temperature of electrolyte in sodium nickel chloride batteries • 100 to 200 degree Celsius • 270 to 350 degree Celsius • 380 to 410 degree Celsius • None of the above

Description : Average temperature of electrolyte in sodium nickel chloride batteries • 100 to 200 degree Celsius • 270 to 350 degree Celsius • 380 to 410 degree Celsius • None of the above

Last Answer : • 270 to 350 degree Celsius

The electrolyte used in sodium nickel chloride batteries is • Sodium chloride • Tetra chloraluminate • Sodium bicarbonate • Sodium glutamate

Description : The electrolyte used in sodium nickel chloride batteries is • Sodium chloride • Tetra chloraluminate • Sodium bicarbonate • Sodium glutamate

Last Answer : • Tetra chloraluminate

Which of the following statements concerning nickel-cadmium batteries is true? A. When mixing electrolyte always add acid to the water. B. Nickel-cadmium batteries can be charged and discharged only a limited number of times without damage to the cells. C. Nickel-cadmium batteries can be stored for a long time and still keep a full charge without additional charging. D. The electrolyte of an idle nickel-cadmium battery must be replaced monthly to maintain battery condition.

Description : Which of the following statements concerning nickel-cadmium batteries is true? A. When mixing electrolyte always add acid to the water. B. Nickel-cadmium batteries can be charged and ... The electrolyte of an idle nickel-cadmium battery must be replaced monthly to maintain battery condition.

Last Answer : Answer: C

Which of the listed ranges represents specific gravity corrected for temperature for the electrolyte of a fully charged portable lead-acid battery? A. 1.100 to 1.150 B. 1.180 to 1.200 C. 1.280 to 1.300 D. 1.750 to 2.000

Description : Which of the listed ranges represents specific gravity corrected for temperature for the electrolyte of a fully charged portable lead-acid battery? A. 1.100 to 1.150 B. 1.180 to 1.200 C. 1.280 to 1.300 D. 1.750 to 2.000

Last Answer : Answer: C

When you check the specific gravity of the battery electrolyte with a hydrometer, it should be kept in mind that ____________. A. the battery is fully charged when the indicator floats low in the electrolyte B. any water that has been previously added to the cells will dilute the solution and give a false reading C. a hydrometer reading is inaccurate if taken immediately after water is added to the cell D. temperature has no effect on hydrometer readings

Description : When you check the specific gravity of the battery electrolyte with a hydrometer, it should be kept in mind that ____________. A. the battery is fully charged when the indicator floats low in ... taken immediately after water is added to the cell D. temperature has no effect on hydrometer readings

Last Answer : Answer: C

When checking the specific gravity of the battery electrolyte with a hydrometer, you should be aware that ________________. A. the battery is fully charged when the float sinks deepest into the electrolyte B. the battery is discharged when the float is highest in the electrolyte C. a hydrometer reading is accurate if taken immediately after water is added to the cell D. warm temperatures will lower the specific gravity of the electrolyte

Description : When checking the specific gravity of the battery electrolyte with a hydrometer, you should be aware that ________________. A. the battery is fully charged when the float sinks deepest into the ... is added to the cell D. warm temperatures will lower the specific gravity of the electrolyte

Last Answer : Answer: D

The freezing point of the electrolyte in a fully charged lead-acid battery will be _____________. A. higher than in a discharged battery B. lower than in a discharged battery C. the same as in a discharged battery D. higher than in a discharged battery, but the specific gravity will be less

Description : The freezing point of the electrolyte in a fully charged lead-acid battery will be _____________. A. higher than in a discharged battery B. lower than in a discharged battery C. the same as in a discharged battery D. higher than in a discharged battery, but the specific gravity will be less

Last Answer : Answer: B

Proper storage battery maintenance includes ____________. A. keeping connections tight and casing surfaces clean B. making sure electrolyte level is below the separator plates C. insulating the terminals with naval jelly D. maintaining a high charging rate at all times

Description : Proper storage battery maintenance includes ____________. A. keeping connections tight and casing surfaces clean B. making sure electrolyte level is below the separator plates C. insulating the terminals with naval jelly D. maintaining a high charging rate at all times

Last Answer : Answer: A

The standard procedure for maintaining the charge in an emergency diesel starting battery is to trickle charge the battery _____________. A. continuously B. at least once each week C. whenever the charge falls to 75% of full charge D. whenever the electrolyte specific gravity falls to 1.250 or lower

Description : The standard procedure for maintaining the charge in an emergency diesel starting battery is to trickle charge the battery _____________. A. continuously B. at least once each week C. whenever the charge falls to 75% of full charge D. whenever the electrolyte specific gravity falls to 1.250 or lower

Last Answer : Answer: A

Local action in a nickel-cadmium battery is offset by _____________. A. separating the positive and negative plates with plastic spacers B. separating the positive and negative plates with resin impregnated spacers C. adding a small amount of lithium hydroxide to the electrolyte D. trickle charging

Description : Local action in a nickel-cadmium battery is offset by _____________. A. separating the positive and negative plates with plastic spacers B. separating the positive and negative plates with resin impregnated spacers C. adding a small amount of lithium hydroxide to the electrolyte D. trickle charging

Last Answer : Answer: D

Loss of or weak residual magnetism in an alternator or generator can be corrected for by _________________. A. running the rotor in the opposite direction for 5 minutes B. allowing the generator to run at 10% of normal speed for 5 minutes C. running the generator at normal speed with the field rheostat fully counterclockwise D. using a storage battery or battery charger to 'flash' the field

Description : Loss of or weak residual magnetism in an alternator or generator can be corrected for by _________________. A. running the rotor in the opposite direction for 5 minutes B. allowing the generator ... rheostat fully counterclockwise D. using a storage battery or battery charger to 'flash' the field

Last Answer : Answer: D

When two batteries are connected in parallel, it should be ensured that A. They have same emf B. They have same make C. They have same ampere hour capacity D. They have identical internal resistance

Description : When two batteries are connected in parallel, it should be ensured that A. They have same emf B. They have same make C. They have same ampere hour capacity D. They have identical internal resistance

Last Answer : A. They have same emf

How long does an electric car battery lasts per charge? A. 20 min.-10hr. B. 30min.-12hr. C. 40min.-9hr. D. 60min.-8hr.

Description : How long does an electric car battery lasts per charge? A. 20 min.-10hr. B. 30min.-12hr. C. 40min.-9hr. D. 60min.-8hr.

Last Answer : B. 30min.-12hr.

The electrode for a battery must be A. A semi conductor B. An insulator C. A good conductor of electricity D. A bad conductor of electricity

Description : The electrode for a battery must be A. A semi conductor B. An insulator C. A good conductor of electricity D. A bad conductor of electricity

Last Answer : C. A good conductor of electricity

Which of the following battery is used for aircraft? A. Lead acid battery B. Nickel-iron battery C. Dry cell battery D. Silver oxide battery

Description : Which of the following battery is used for aircraft? A. Lead acid battery B. Nickel-iron battery C. Dry cell battery D. Silver oxide battery

Last Answer : B. Nickel-iron battery

Following will happen if battery charging rate is too high A. Excessive gassing will occur B. Temperature rise will occur C. Bulging and buckling of plates we occur D. All of the above

Description : Following will happen if battery charging rate is too high A. Excessive gassing will occur B. Temperature rise will occur C. Bulging and buckling of plates we occur D. All of the above

Last Answer : D. All of the above

Battery container should be acid resistance therefore it is made up of A. Glass B. Plastic C. Wood D. All of the above

Description : Battery container should be acid resistance therefore it is made up of A. Glass B. Plastic C. Wood D. All of the above

Last Answer : D. All of the above

The sulphur in sulphur sodium battery is absorbed by___ sponge. • Sodium • Carbon • Wire • Cellulose

Description : The sulphur in sulphur sodium battery is absorbed by___ sponge. • Sodium • Carbon • Wire • Cellulose

Last Answer : • Carbon

The following is the operating temperatures of the sodium –sulphur battery. • 400 to 600°C • 1000 to 1500°C • 300 to 350°C • 100 to 200°C

Description : The following is the operating temperatures of the sodium –sulphur battery. • 400 to 600°C • 1000 to 1500°C • 300 to 350°C • 100 to 200°C

Last Answer : • 300 to 350°C

Sodium sulphur battery is a type of molten-salt battery constructed from _____ sodium and sulphur. • Solid • Liquid • Plasma • Gases

Description : Sodium sulphur battery is a type of molten-salt battery constructed from _____ sodium and sulphur. • Solid • Liquid • Plasma • Gases

Last Answer : • Liquid

How much time it takes for a electric car of 60kWh battery to charge 1. 5 hours 2. 8 hours 3. 6-7 hours 4. None of above

Description : How much time it takes for a electric car of 60kWh battery to charge 1. 5 hours 2. 8 hours 3. 6-7 hours 4. None of above

Last Answer : 2. 8 hours

Life of a battery in the electric vehicle is about A 8 years B 5 years C 10 years D 20 years

Description : Life of a battery in the electric vehicle is about A 8 years B 5 years C 10 years D 20 years

Last Answer : A 8 years

What type of battery is used in an electric car? A] Lithium ion B] Nickel -metal hydride C] Both A and B D] None of the above

Description : What type of battery is used in an electric car? A] Lithium ion B] Nickel -metal hydride C] Both A and B D] None of the above

Last Answer : C] Both A and B

What is the life of battery in an electric car ? A] 8 year B] 10 year C] 4 year D] 20 year

Description : What is the life of battery in an electric car ? A] 8 year B] 10 year C] 4 year D] 20 year

Last Answer : A] 8 year

Which of the following procedures represents the best method to prevent the freezing of batteries continuously exposed to low temperatures? A. The battery caps should be removed. B. The battery cap vents should be sealed. C. The battery should be kept in a fully charged condition. D. The battery should be disconnected from its charging source.

Description : Which of the following procedures represents the best method to prevent the freezing of batteries continuously exposed to low temperatures? A. The battery caps should be removed. B. The battery cap ... in a fully charged condition. D. The battery should be disconnected from its charging source.

Last Answer : Answer: C

The state of charge of a lead acid storage battery is best indicated by the _____________. A. testing of the individual cell voltages B. ampere hour capacity of the battery C. specific gravity of the electrolyte D. total cell voltages

Description : The state of charge of a lead acid storage battery is best indicated by the _____________. A. testing of the individual cell voltages B. ampere hour capacity of the battery C. specific gravity of the electrolyte D. total cell voltages

Last Answer : Answer: C

pecific gravity of fully charged storage battery is ∙ 1.15 ∙ 1.50 ∙ 1.28 ∙ 2.15

Description : pecific gravity of fully charged storage battery is ∙ 1.15 ∙ 1.50 ∙ 1.28 ∙ 2.15

Last Answer : ∙ 1.28

Maintenance of alkaline batteries should include _________. A. checking the electrolyte weekly using a hydrometer B. replacing the electrolyte every 5 years C. trickle charging D. replacment when the volts per cell drops below 1.8 VDC

Description : Maintenance of alkaline batteries should include _________. A. checking the electrolyte weekly using a hydrometer B. replacing the electrolyte every 5 years C. trickle charging D. replacment when the volts per cell drops below 1.8 VDC

Last Answer : Answer: C

When a battery is continuously exposed to low temperatures, the best procedure to keep it from freezing is to _________. A. remove the battery caps B. securely cover the battery C. keep the battery fully charged D. disconnect the battery

Description : When a battery is continuously exposed to low temperatures, the best procedure to keep it from freezing is to _________. A. remove the battery caps B. securely cover the battery C. keep the battery fully charged D. disconnect the battery

Last Answer : Answer: C