Consider the following statements with respect to a high Q, series RLC circuit under resonance

Consider the following statements with respect to a high Q, series RLC circuit under resonance

1. The voltage across R is equal to the applied voltage

2. The voltage across L and C are zero

3. The voltage across L and C are equal in magnitude

4. The voltage accross L and C are maximum

Which of these statements are correct?
by

1 Answer

Answer :

Consider the following statements with respect to a high Q, series RLC circuit under resonance

1. The voltage across R is equal to the applied voltage

2. The voltage across L and C are zero

3. The voltage across L and C are equal in magnitude

4. The voltage accross L and C are maximum

Which of these statements are correct?

1,3 and 4

by

Related questions

In a series RLC circuit at resonance, the magnitude of the voltage developed across the capacitor

Description : In a series RLC circuit at resonance, the magnitude of the voltage developed across the capacitor  A) Is always zero B) Can never be greater than the input voltage C) Can be greater than the input ... input voltage D) Can be greater than the input voltage, and is in phase with the input voltage

Last Answer : In a series RLC circuit at resonance, the magnitude of the voltage developed across the capacitor Can be greater than the input voltage, however, it is 90° out of phase with the input voltage 

What does it mean when an RLC circuit is at resonance?

Last Answer : When the total impendance equals  supply frequency.

In a series RLC high Q circuit, the current peaks at a frequency

Description : In a series RLC high Q circuit, the current peaks at a frequency  (1) equal to the resonant frequency (2) greater than the resonant frequency (3) less than the resonant frequency (4) equal to half the resonant frequency

Last Answer : In a series RLC high Q circuit, the current peaks at a frequency equal to the resonant frequency

The Q factor of a coil at resonant frequency 1.5 MHz of an RLC series circuit is 150. The Bandwidth is : -

Description : The Q factor of a coil at resonant frequency 1.5 MHz of an RLC series circuit is 150. The Bandwidth is : - a) 225 MHz b) 1.06 MHz c) 10 KHz d) 10 MHz

Last Answer : The Q factor of a coil at resonant frequency 1.5 MHz of an RLC series circuit is 150. The Bandwidth is : - 10 KHz

A series RLC circuit has a resonant frequency of 1 KHz and a quality factor Q = 100. If each of the R,L and C...

Description : A series RLC circuit has a resonant frequency of 1 KHz and a quality factor Q = 100. If each of the R,L and C is doubled from its original value, the new Q of the circuit is:  (1) 25 (2) 50 (3) 100 (4) 200

Last Answer : A series RLC circuit has a resonant frequency of 1 KHz and a quality factor Q = 100. If each of the R,L and C is doubled from its original value, the new Q of the circuit is: 200.

In parallel RLC resonance circuit at resonance the current will be

Description : In parallel RLC resonance circuit at resonance the current will be  (1) Minimum (2) Maximum (3) Zero (4) Infinite

Last Answer : In parallel RLC resonance circuit at resonance the current will be Minimum 

In an RLC parallel circuit, the impedance at resonance is

Last Answer : In an RLC parallel circuit, the impedance at resonance is Maximum.

A DC voltage source is connected across a series RLC circuit. Under steady-state conditions, the applied DC

Description : A DC voltage source is connected across a series RLC circuit. Under steady-state conditions, the applied DC voltage drops entirely across the

Last Answer : A DC voltage source is connected across a series RLC circuit. Under steady-state conditions, the applied DC voltage drops entirely across the C only

Define active power and reactive power for RLC series circuit.

Description : Define active power and reactive power for RLC series circuit.

Last Answer : Active Power (P): Active power (P) is given by the product of voltage, current and the cosine of the phase angle between voltage and current.  Unit: watt (W) or kilo-watt (kW) or Mega-watt ... volt-ampere-reactive (VAr), or kilo-volt-ampere-reactive (kVAr) or Mega-voltampere-reactive (MVAr) 

In a series RLC circuit that is operating above the resonant frequency, the current : -

Description : In a series RLC circuit that is operating above the resonant frequency, the current : -  a) lags the applied voltage b) leads the applied voltage c) is in phase with the applied voltage d) is zero

Last Answer : In a series RLC circuit that is operating above the resonant frequency, the current : - lags the applied voltage

A series RLC circuit has a resistance of 50 , inductance of 0.4H and a...

Description : A series RLC circuit has a resistance of 50 , inductance of 0.4H and a capacitor of 10µF. The circuit is connected across a 100V supply. The resonance frequency and the current through the resistance are 

Last Answer : A series RLC circuit has a resistance of 50 , inductance of 0.4H and a capacitor of 10µF. The circuit is connected across a 100V supply. The resonance frequency and the current through the resistance are 500 rad/s and 2A.

In a series-RLC circuit, what is the condition of the circuit if there is high impedance, low current, and low reactance voltages

Description : In a series-RLC circuit, what is the condition of the circuit if there is high impedance, low current, and low reactance voltages

Last Answer : Nonresonant (circuit is either above or below resonance)

Why is the RLC series circuit called an acceptor circuit?

Description : Why is the RLC series circuit called an acceptor circuit?

Last Answer : The series RLC circuit exhibits minimum resistance at resonance.This means an input at the resonant frequency will see maximumcurrent in that RLC circuit. Put another way, the RLC circuit issaid to ... the current of an input signal when that signalequals the resonant frequency of the RLC circuit.

In series RLC circuit at resonant a) Voltage is in phase with current b) Current is maximum c) Inductive reactance = Capacitive reactance d) All of the above

Description : In series RLC circuit at resonant a) Voltage is in phase with current b) Current is maximum c) Inductive reactance = Capacitive reactance d) All of the above

Last Answer : Ans: All of the above

Derive an expression for resonant frequency of series RLC circuit.

Description : Derive an expression for resonant frequency of series RLC circuit.

Last Answer : At resonance frequency in RLC series circuit, we have inductive reactance is equal to capacitive reactance i.e.  Where fr is the resonant frequency in RLC series circuit. 

The loop equation for a series RLC circuit gives

Description : The loop equation for a series RLC circuit gives

Last Answer : The loop equation for a series RLC circuit gives

In a series RLC circuit operating below the resonant frequency the current

Description : In a series RLC circuit operating below the resonant frequency the current  (a) I leads Vs (b) I lags Vs (c) I is in Phase with Vs (d) None of these

Last Answer : In a series RLC circuit operating below the resonant frequency the current  I leads Vs 

In an ac series RLC circuit, the voltage across R and L is 20 V; voltage across L and C is 9 V and voltage

Description : In an ac series RLC circuit, the voltage across R and L is 20 V; voltage across L and C is 9 V and voltage across RLC is 15 V. What is the voltage across C?

Last Answer : In an ac series RLC circuit, the voltage across R and L is 20 V; voltage across L and C is 9 V and voltage across RLC is 15 V. What is the voltage across C? 7 V

An RLC series. circuit remains predominantly inductive

Description : An RLC series. circuit remains predominantly inductive

Last Answer : Above resonance frequency

Consider the following statements : If a high Q parallel resonant circuit is loaded with a resistance ...

Description : Consider the following statements : If a high Q parallel resonant circuit is loaded with a resistance  1. The circuit impedance reduces.  2. The resonant frequency remains the same.  3. The bandwidth reduces.  Which of the above statements is/are correct ?

Last Answer : 1

Draw series R-L-C circuit and describe resonance.

Description : Draw series R-L-C circuit and describe resonance. 

Last Answer : Series R-L-C circuit:  Explanation of Series R-L-C Resonance circuit: A series circuit containing resistance, inductance and capacitance, is said to be resonant when the circuit power ... , and as we are analyzing a series RLC circuit this resonance frequency produces a Series Resonance.

in Series LCR circuit, at resonance:

Description : in Series LCR circuit, at resonance:  (1) Current is maximum and power factor is zero (2) Current is maximum and power factor is unity (3) Current is minimum and power factor is unity (4) None of these

Last Answer : in Series LCR circuit, at resonance: Current is maximum and power factor is unity.

In an R-C-L series circuit, during resonance, the impedance will be _____.

Last Answer : In an R-C-L series circuit, during resonance, the impedance will be minimum.

The series and parallel resonance on L-C circuit differs in that?

Description : The series and parallel resonance on L-C circuit differs in that?

Last Answer : The series and parallel resonance on L-C circuit differs in that series resistance needs a low-resistance source for sharp rise in current.

In R-L-C series resonant circuit magnitude of resonance frequency can be changed by changing the value of?

Description : In R-L-C series resonant circuit magnitude of resonance frequency can be changed by changing the value of?

Last Answer : In R-L-C series resonant circuit magnitude of resonance frequency can be changed by changing the value of L or C.

In L-C-R series circuit suppose `omega_(r)` is resonance frequency, then match the following table, `{:(,,"Table-1",,"Table-2"),(,(A),"If " omegagtome

Description : In L-C-R series circuit suppose `omega_(r)` is resonance frequency, then match the following table, `{:(,,"Table-1",,"Table-2"),(,(A),"If " omegagtome

Last Answer : In L-C-R series circuit suppose `omega_(r)` is resonance frequency, then match the following table, `{:(,,"Table ... are in phase"),(,,,(T),"None"):}`

The combined effect of inductive reactance, capacitive reactance, and resistance in an AC series circuit is known as _____________. A. reactance B. total reactance C. impedance D. resonance

Description : The combined effect of inductive reactance, capacitive reactance, and resistance in an AC series circuit is known as _____________. A. reactance B. total reactance C. impedance D. resonance

Last Answer : Answer: C

What is resonance in series circuit?

Description : What is resonance in series circuit?

Last Answer : If in an AC circuit inductive reactance XL and capacitive reactance XC is equal the voltage across both will be equal and are 180° out of phase. So that each will cancel each other and the current ... resonant frequency and the resonant frequency (FR) is equal to (FR) = 1/2π√LC cycles per second.

An a.c series circuit has resistance of 10ohm, inductance of 0.1H and capacitance of 10µf, voltage applied to circuit is 200V. find (i) Resonant frequency (ii) Current at resonance (iii) Power at resonance

Description : An a.c series circuit has resistance of 10ohm, inductance of 0.1H and capacitance of 10µf, voltage applied to circuit is 200V. find (i) Resonant frequency (ii) Current at resonance (iii) Power at resonance 

Last Answer : Solution: For RLC series circuit

State condition for resonance in R-L-C series circuit.

Description : State condition for resonance in R-L-C series circuit.

Last Answer : The condition for resonance in R-L-C series circuit. i) Inductive Reactance should be equal to capacitive reactance. That is XL = XC ii) The power factor of the circuit is Cos ɸ = 1 iii)The voltage and ... and given by I =V/R. v)Impedance of the circuit is minimum and given by Z =R.

Why is the current behind the voltage in the RLC circuit ?

Description : Why is the current behind the voltage in the RLC circuit ?

Last Answer : Inductance prevents any change in current or flux. So the current stays behind the voltage.

In what ways can RLC be solved in parallel circuit ?

Description : In what ways can RLC be solved in parallel circuit ?

Last Answer : Answer : vector or phaser method , admixture method , vector algebra method , equivalent impedance method.

A parallel RLC circuit has the node equation Determine v(t) using the phasor method.

Description : A parallel RLC circuit has the node equation Determine v(t) using the phasor method.

Last Answer : A parallel RLC circuit has the node equation Determine v(t) using the phasor method.

Consider the following statements with respect to Discrete Fourier Transform (DFT) :

Description : Consider the following statements with respect to Discrete Fourier Transform (DFT) : 1. It is obtained by performing a sampling operation in the time domain. 2. It transforms a finite duration sequence into a discrete frequency spectrum. 3 ... (a) 1 and 2 only (b) 2 and 3 only (c) 1 only (d) 3 only

Last Answer : Consider the following statements with respect to Discrete Fourier Transform (DFT) : 1. It is obtained by performing a sampling operation in the time domain. 2. It transforms a finite duration sequence into a discrete frequency spectrum. ... (a) 1 and 2 only (b) 2 and 3 only (c) 1 only (d) 3 only

At series resonance,

Description : At series resonance, (A) Circuit impedance is maximum (B) Circuit current is minimum (C) Voltage across L or C is zero (D) Power factor is unity

Last Answer : At series resonance, Power factor is unity

A tunable RF instrument, which, by means of a sharp dip of an indicating meter, indicates resonance with an external circuit under test

Description : A tunable RF instrument, which, by means of a sharp dip of an indicating meter, indicates resonance with an external circuit under test

Last Answer : dip meter

If resistance is 20 Q. and inductance is 27 in a R-L series circuit, then time constant of this circuit will be?

Description : If resistance is 20 Q. and inductance is 27 in a R-L series circuit, then time constant of this circuit will be?

Last Answer : 0.1s

A parallel AC. circuit in resonance will?

Description : A parallel AC. circuit in resonance will?

Last Answer : A parallel AC. circuit in resonance will have a high impedance.

The purpose of a parallel circuit resonance is to magnify?

Description : The purpose of a parallel circuit resonance is to magnify?

Last Answer : The purpose of a parallel circuit resonance is to magnify voltage.

Magnitude of current at resonance in R-L-C circuit?

Description : Magnitude of current at resonance in R-L-C circuit?

Last Answer : The current will be maximum if it is a series rlc circuit.

The power factor at resonance in R-L- C parallel circuit is?

Description : The power factor at resonance in R-L- C parallel circuit is?

Last Answer : since a rlc circuit at resonance behaves like a pure resistive circuit, i.e there is no phase difference between current and voltage, hence the power factor is unity.

Which of the following statements is incorrect? A) During parallel resonance impedance at resonance is

Description : Which of the following statements is incorrect? A) During parallel resonance impedance at resonance is minimum B) During parallel resonance current is magnified C) During series resonance current at resonance is maximum D) During series as well as parallel resonance, the power factor is unity

Last Answer : Which of the following statements is incorrect? A) During parallel resonance impedance at resonance is minimum B) During parallel resonance current is magnified C) During series resonance current at resonance is maximum D) During series as well as parallel resonance, the power factor is unity

Consider a circuit with four resistors in series connected to a voltage source. What happens to the voltage

Description : Consider a circuit with four resistors in series connected to a voltage source. What happens to the voltage across each resistor, if the value of each of the resistors is doubled? A) It will double B) It will remain the same C) It will be halved D) It will become zero

Last Answer : Consider a circuit with four resistors in series connected to a voltage source. What happens to the voltage across each resistor, if the value of each of the resistors is doubled? A) It will double B) It will remain the same C) It will be halved D) It will become zero

Consider the following statements : Any element connected in 1. Series with an ideal current source is...

Description : Consider the following statements : Any element connected in  1. Series with an ideal current source is redundant. 2. Parallel with an ideal current source is redundant. 3. Series with an ideal voltage ... with an ideal voltage source is redundant.  Which of the above statements is/are correct ?

Last Answer : Series with an ideal current source is redundant. and Parallel with an ideal voltage source is redundant. 

Consider the following statements with respect to pollution. A. To control air pollution problems, by the end of 2002 all the buses of Delhi were conv

Description : Consider the following statements with respect to pollution. A. To control air pollution problems, by the end of 2002 all the buses of Delhi were conv

Last Answer : Consider the following statements with respect to pollution. A. To control air pollution problems, by the ... C. b alone correct D. c alone correct

Consider the following statements in respect of the “Duty Free Import Authorization Scheme”.

Description : Consider the following statements in respect of the “Duty Free Import Authorization Scheme”.

Last Answer : The scheme offers the facility to import the required inputs before exports.

Consider the following statements in respect of critical flow in a wide rectangular channel: 1. The specific energy is minimum for a given discharge. 2. The discharge is maximum for a given specific energy 3. The specific force is minimum for a given discharge. 4. The Froude number is equal to unity. Which of these statements are correct? (a) 1 , 2 & 3 only (b) 1, 2, 3 & 4 (c) 1, 2 & 4 only (d) 2, 3 & 4 only

Description : Consider the following statements in respect of critical flow in a wide rectangular channel: 1. The specific energy is minimum for a given discharge. 2. The discharge is maximum for a given specific energy 3. The specific force is minimum for a ... b) 1, 2, 3 & 4 (c) 1, 2 & 4 only (d) 2, 3 & 4 only

Last Answer : (b) 1, 2, 3 & 4

Consider the following statements in respect of steady laminar flow through a circular pipe: 1. Shear stress is zero on the central axis of the pipe 2. Discharge varies directly with the viscosity of the fluid 3. Velocity is maximum at the centre of the pipe. 4. Hydraulic gradient varies as the square of the mean velocity of flow. Which of these statements are correct? (a) 1, 2 , 3 & 4 (b) 1 & 3 only (c) 2 & 4 only (d)3 & 4 only

Description : Consider the following statements in respect of steady laminar flow through a circular pipe: 1. Shear stress is zero on the central axis of the pipe 2. Discharge varies directly with the viscosity of the fluid 3. Velocity is maximum at the ... 2 , 3 & 4 (b) 1 & 3 only (c) 2 & 4 only (d)3 & 4 only

Last Answer : (b) 1 & 3 only

Consider the following statements: 1. Standard penetration test is commonly used for cohesionless soils. 2. Standard penetration test results in respect of a cohesionless soil are correlated to its density index and friction angle. 3. Use of H-value not corrected for overburden pressure leads to highly conservative design of footings at shallow depths. Which of these statements are correct? (a) 1, 2 & 3 (b) 1 & 2 only (c) 2 & 3 only (d) 1 & 3 only

Description : Consider the following statements: 1. Standard penetration test is commonly used for cohesionless soils. 2. Standard penetration test results in respect of a cohesionless soil are correlated to its density index and friction angle. 3. Use of H- ... 2 & 3 (b) 1 & 2 only (c) 2 & 3 only (d) 1 & 3 only

Last Answer : (a) 1, 2 & 3

Consider the following statements : 1. There is no flow across a streamline 2. Streamline spacing varies directly with velocity at the section 3. Streamlines do not cross 4. In steady flow, streamline pattern does not change with time Which of these statements in respect of stream flow pattern are correct? (a) 1, 2, 3 and 4 (b) 1 and 2 only (c) 1, 3 and 4 only (d) 2, 3 and 4 only

Description : Consider the following statements : 1. There is no flow across a streamline 2. Streamline spacing varies directly with velocity at the section 3. Streamlines do not cross 4. In steady flow, streamline pattern does not change with ... 4 (b) 1 and 2 only (c) 1, 3 and 4 only (d) 2, 3 and 4 only

Last Answer : (c) 1, 3 and 4 only