Which transmission mode is used for data communication along telephone lines?
(A) Parallel (B) Serial
(C) Synchronous (D) Asynchronous

1 Answer

Answer :

(B) Serial

Related questions

Description : The situation when both transmitter and receiver have to work in tandem is referred to as (A) parallel (B) serial (C) synchronous (D) asynchronous

Last Answer : (C) synchronous

Description : How many 8-bit characters can be transmitted per second over a 9600 baud serial communication link using asynchronous mode of transmission with one start bit, eight data bits, two stop bits, and one parity bit ? a. 600 b. 800 c. 876 d. 1200

Last Answer : b. 800

Description : Which of the following statement is incorrect? a. The difference between synchronous and asynchronous transmission is the clocking derived from the data in synchronous transmission. b. Half ... in online activities d. Batch processing is the prefered processing mode for telecommunication operation.

Last Answer : Batch processing is the prefered processing mode for telecommunication operation.

Description : Determine from the following the basic mode of transmission system in the public data network in which data are transferred from the source to the network and from the network to the destination in the frame format. A. Voice mode B. Asynchronous mode C. Synchronous mode D. Packet mode

Last Answer : D. Packet mode

Description : Explain simple telephone communication system with circuit and equation of current flow in microphone?

Last Answer : Simple Telephone Communication: In the simplest form of a telephone circuit, there is one way communication involving two entities, one receiving (listening) and the other transmitting (talking).   ... carrier wave in AM system. The quantity m is equivalent to the modulation index in AM. 

Description : A certain amount of side tone is essential in telephone communication (A) TRUE (B) FALSE

Last Answer : Ans: (A)

Description : In_______transmission, astartbit and a stopbit frame a character byte. A) asynchronous serial B) synchronous serial C) parallel D) (a) and (b)

Last Answer : asynchronous serial

Description : In_______transmission, bits aretransmittedover asingle wire, one ata time. A) asynchronous serial B) synchronous serial C) parallel D) (a) and (b)

Last Answer : (a) and (b)

Description : In_______transmission, bits aretransmittedsimultaneously,each across its own wire. A) Asynchronous serial B) Synchronous serial C) Parallel D) (a) and (b)

Last Answer : Parallel

Description : Compare characteristics of asynchronous and synchronous transmission mode (four points). 

Last Answer : Synchronous transmission Asynchronous transmission 1. Synchronous transmission are synchronized by an external clock. 1. Asynchronous transmission are synchronized by special signals along the transmission ... for transferring a small amount of data as it is simple and economical.

Description : What are wired and wireless transmission systems? Explain the mechanisms of propagation of radio communication.

Last Answer :  Transmission Systems: Modern long distance transmission systems can be placed under three broad categories: 1. Radio Systems 2. Coaxial cable systems 3. Optical fibre systems  ... microwave communication limited by horizon. 3. Troposphere scatter communication 4. Satellite communication. 

Description : A large numbers of computers in a wide geographical area can be efficiently connected using (A) twisted pair lines (B) coaxial cables (C) Communication satellites (D) all of the above

Last Answer : (D) all of the above

Description : How many bytes of data can be sent in 15 seconds over a serial link with baud rate of 9600 in asynchronous mode with odd parity and two stop bits in the frame? a. 10,000 bytes b. 12,000 bytes c. 15,000 bytes d. 27,000 bytes

Last Answer : b. 12,000 bytes

Description : Choose the Protocols working in the Data Link Control Layer of OSI model below. a. ATM (Asynchronous Transfer Mode), Frame Relay b. HDLC (High Level Data Link Control), SDLC (Synchronous Data Link Control) c. ARP (Address Resolution Protocol), IEEE802.3 d. All the above

Last Answer : d. All the above

Description : In a LAN network every system is identified by (A) Name (B) MAC address (C) IP Address (D) Serial number given by manufacturer

Last Answer : (C) IP Address

Description : What is a Modem? What is the need of MODEM in data communication? Explain at least one modulation technique used for high speed modems.

Last Answer : Modems are essentially used to interface digital circuits to transmit information on analogue channels like telephone systems. Modem (from modulator-demodulator) is a device that modulates an analogue carrier ... caused by the lines makes the detection even harder than amplitude modulation.   

Description : How many synchronous and asynchronous modes are there in serial port of 8096? M. Krishna Kumar/IISc. Bangalore M5/V1/June 04/1 Microprocessors and Microcontrollers/ Multiple Choice Questions Architecture of Micro ... 2, 2 respectively b) 3,1 respectively c) 1, 3 respectively d) 1, 2 respectively

Last Answer : c) 1, 3 respectively

Description : Network Layer is used for (A) Breaking up the data in frames for transmission (B) Deal with Error correction (C) Automatic Recovery of Procedure (D) Physical Architecture

Last Answer : (D) Physical Architecture

Description : Common channel signalling______________ (A) Uses the speech or data path for signaling. (B) Does not use the speech or data path for signaling. (C) Needs no additional transmission facilities. (D) Finds it difficult to handle signaling during speech.

Last Answer : (C) Needs no additional transmission facilities.

Description : Discuss different Routing plan adopted in a Telephone network.

Last Answer : Hierarchical networks are capable of handing heavy traffic where required, and at the same time use minimal number of trunk groups. Three methods are used for deciding on the route for a ... selection methods can be implemented. Computer based routing is a standard feature in data networks.  

Description : Write short notes (i)Telephone hand set and it’s working. (ii) CPU based exchange

Last Answer : (i) A standard telephone set is comprised of a transmitter, a receiver, and electrical network for equalization, associated circuitry to control side tone levels and to regulate signal power, ... commands are designed to be of variable length necessitating the use of an end-of-command symbol  

Description : What is the need of a hybrid in telephone networks? How does it work?

Last Answer :  Digital exchanges require receive and transmit signals on separate two-wire circuits. This calls for two-wire to four-wire conversion. Such a conversion is normally required for trunk transmissions in ... from the subscriber end is completely nullified from coupling into the winding A.  

Description : What is store program control (SPC)? Give the organization of centralized SPC. Discuss the advantages of SPC automation in telephone switching.

Last Answer :  In stored program control systems, a program or set of instructions to the computer is stored in its memory and the instructions are executed automatically one by one by the processor. Carrying out ... of services can be provided to customers.  (v) Increase level of automotive in switching 

Description : Engaged tone is generated in the: (A) Telephone instrument of calling subscriber (B) Telephone instrument of called subscriber (C) Exchange (D) Repeater

Last Answer : (C) Exchange

Description : Telephone Traffic is measured in (A) Seconds. (B) Hours. (C) Erlang (D) Pulses per minute.

Last Answer : (C) Erlang

Description : Example of circuit switching and S&F (Stored and Forward) switching is (A) Telephone and Post of Telegraph (B) Video Signal Post or Telegraph (C) Digital Signal Post or Telegraph (D) None of above

Last Answer : (A) Telephone and Post of Telegraph

Description : Distortion caused on telephone line by an adjacent one is called (A) Cross Fire (B) Inductive Disturbance (C) Cross Talk (D) None of these

Last Answer : (C) Cross Talk

Description : The bandwidth requirement of a telephone channel is (A) 3 KHz (B) 15 KHz (C) 5 KHz (D) 25 KHz

Last Answer : (A) 3 KHz

Description : Telex is a (A) Telephone Service between various subscribers (B) Tele printer Service between various subscribers (C) Television Service between various subscribers (D) Telegraph Service between various subscribers

Last Answer : (B) Tele printer Service between various subscribers

Description : The ________is a circuit-switched network, while the ______is a packet-switched network. (A) Telephone, ATM (B) SONET and FDDI (C) Satellite, Telephone (D) FDDI and SONET

Last Answer : (A) Telephone, ATM

Description : A sample rate of ________is required for a good quality representation of telephone conversation. (A) 4500 times per second. (B) 700 integer sample points per minute. (C) 50 times per second per mile of distance travelled. (D) 8000 times per second.

Last Answer : (C) 50 times per second per mile of distance travelled.

Description : Telephone companies normally provide a voltage of __________to power telephones. (A) +24 volts DC (B) -24 volts DC (C) +48 volts DC (D) -48 volts DC.

Last Answer : (D) -48 volts DC.

Description : Modem is referred to as ______. A. Universal asynchronous Rx/Tx B. Data communication equipment C. Universal synchronous Rx/Tx D. Data terminal equipment

Last Answer : B. Data communication equipment

Description : Data is directly on the transmission cable. A. Asynchronous B. Synchronous C. Baseband D. Broadband

Last Answer : C. Baseband

Description : What is the principal difference between asynchronous and synchronous transmission? A. The clocking is mixed with the data in synchronous transmission B. The pulse height are difficult C. The clocking is derived from the data in synchronous D. The bandwidth required is difficult.

Last Answer : C. The clocking is derived from the data in synchronous

Description : ECE Board Exam March 1996 What is the one principal difference between synchronous and asynchronous transmission? A. the pulse height are different B. the clocking is derived from the data in ... C. the clocking is mixed with the data in asynchronous D. the bandwidth required is different

Last Answer : B. the clocking is derived from the data in synchronous transmission

Description : Which of the following transmission systems provide the highest data rate to in individual device? a. computer bus b. telephone lines c. voice and mode d. lease lines

Last Answer : computer bus

Description : In asynchronous serial communication the physical layer provides ___________ a. start and stop signalling b. flow control c. both start & stop signalling and flow control d. only start signalling

Last Answer : c. both start & stop signalling and flow control

Description : Sky wave Communication is prone to fading (A) TRUE (B) FALSE

Last Answer : Ans: (A)

Description : Computer to computer communication is: (A) Simplex (B) Duplex (C) Half Duplex (D) Both Duplex and Half Duplex

Last Answer : (B) Duplex

Description : What are transmission bridges? How do they help in satisfying the connectivity?

Last Answer : A typical transmission bridge is shown in Fig. The series capacitance and the shunt inductances of the two relays provide a high-pass filter to transmit the AC speech signals, while the relays respond independently to the DC loop/disconnect signals from the calling and called customer.  

Description : In a frame transmission, CRC stands for (A) Code Renewable Check (B) Cyclic Redundancy Check (C) Control and Refresh Code (D) Cyclic Refreshing of CPU

Last Answer : (B) Cyclic Redundancy Check

Description : Discuss briefly subscriber loop system. Give some technical specification for subscriber lines.

Last Answer : Subscriber Loop System: Every subscriber in a telephone network is connected generally to the nearest switching office by means of a dedicated pair of wires. Subscriber loop refers to this pair of wires. It is un ... 1. Diameter of wire 2. D.C. resistance per Km 3. Attenuation per Km 

Description : How does one arrive at the probability of availability of free lines during the busy hour? How can this be improved?

Last Answer :  One can arrive at the probability of free lines during busy hour by using the delay probability of the exchange. The delay probability indicates the delay that a caller may face before his call can be ... may well represent the fraction of the calls lost, which is what the GOS is all about. 

Description : Trunks are the lines that run between (A) Subscribers and exchange (B) Switching system and power plant (C) Local area network (D) Switching stations

Last Answer : (D) Switching stations

Description : Trunks are the lines that run between (A) subscribers and exchange (B) switching system and power plant (C) Local Area Network (D) switching systems

Last Answer : (B) switching system and power plant

Description : Trunks are the lines that run between (A) Subscribers and exchange (B) switching system and power plant (C) Local area network. (D) Switching stations.

Last Answer : (D) Switching stations.

Description : Compare synchronous and asynchronous communication.

Last Answer : Synchronous communication Asynchronous communication Single clock is used for both transmitter and receiver Two different clocks are used for both transmitter and receiver Data bits are transmitted ... Character is received at a any rate Less reliable More reliable

Description : In __________ transmission, a unique SYNC character is transmitted at the beginning of each message. A. asynchronous B. synchronous C. digital D. analogue

Last Answer : B. synchronous

Description : In_________ transmission, we send bits oneafter another without startor stop bits or gaps. It is the responsibilityof the receiver togroup the bits. A) synchronous B) asynchronous C) isochronous D) none of the abov

Last Answer : synchronous