A distributed network configuration in which all data/information pass through a central computer is
 (A) Bus network (B) Star network
 (C) Ring network (D) Point to point network

1 Answer

Answer :

(B) Star network

Related questions

Description : A distributed network configurationin which all data/information pass througha central computer is A. bus network B. star network C. ring network D. Point-to-point network E. None of the above

Last Answer : star network

Description : Ethernet 10 Base 2 is an example of ______network topology. (A) Bus (B) Ring (C) Star (D) Mesh

Last Answer : (A) Bus

Description : A central computer surrounded by one or more satellite computers is called a A. bus network B. ring network C. star network D. All of theabove E. None of the above

Last Answer : star network

Description : With neat diagrams explain the configuration of a step-by-step switching system.

Last Answer : The schematic diagram for such an exchange is given in Fig. Each subscriber is connected to a single rotary pre-selector switch at the exchange, the outputs from this switch being ... two further digits, connection is established, providing the called subscriber's to answer his telephone.

Description : Which network topology requires a central controller or hub? a) Star b) Mesh c) Ring d) Bus

Last Answer : a) Star

Description : Network Layer is used for (A) Breaking up the data in frames for transmission (B) Deal with Error correction (C) Automatic Recovery of Procedure (D) Physical Architecture

Last Answer : (D) Physical Architecture

Description : Signalling transfer point (STP) exist in (A) Strowger exchange (B) SS7 (C) Local area network (D) PABX

Last Answer : (B) SS7

Description : Network with point-to-point link is known as (A) Fully Connected Network (B) Half Connected Network (C) Duplex Connected Network (D) None of these

Last Answer : (A) Fully Connected Network

Description : The number of point to point links required in a fully connected network for 50 entities is (A) 1250 (B) 1225 (C) 2500 (D) 50

Last Answer : Ans: (C)

Description : A star connected intermediate exchange is known as a (A) Repeater exchange (B) Hub exchange (C) Private branch exchange (D) Tandem exchange

Last Answer : (B) Hub exchange

Description : ISDN handles data pertaining to (A) All digital services (B) Speech and Video (C) Computer data only (D) Speech only

Last Answer : (A) All digital services

Description : Discuss different Routing plan adopted in a Telephone network.

Last Answer : Hierarchical networks are capable of handing heavy traffic where required, and at the same time use minimal number of trunk groups. Three methods are used for deciding on the route for a ... selection methods can be implemented. Computer based routing is a standard feature in data networks.  

Description : Find the total number of link L having five entities? Explain differences between folded and non-folded network.

Last Answer : Folded network: When all the inlets/outlets are connected to the subscriber lines, the logical connection appears as shown in Fig. In this case, the output lines are folded back to the input ... non-folded network to be non-blocking, the network should support N simultaneous switching paths.  

Description : What are the major systems of a telecommunication network? Discuss in detail the subscriber loop systems.

Last Answer : The major systems of any telecommunication network may consist of the following major systems: 1. Subscriber end instruments or equipments 2. Subscriber loop systems 3. Switching ... exchange. The subscriber cable pairs emanating from the exchange are also terminated on the MDF.  

Description : A two stage non-blocking network requires twice the number of switching elements as the single stage non-blocking network. (A) TRUE (B) FALSE

Last Answer : Ans: (A)

Description : The Signalling connection control part (SCCP) and message transfer part (MTP) together are referred to as (A) Signal Switching Points (SSPs) (B) Signal Transfer Points (STPs) (C) Signal Control Points (SCPs) (D) Network service part (NSP)

Last Answer : (D) Network service part (NSP)

Description : Trunks are the lines that run between (A) Subscribers and exchange (B) Switching system and power plant (C) Local area network (D) Switching stations

Last Answer : (D) Switching stations

Description : An important terminal that is required between DTE and PSTN is (A) Server (B) MODEM (C) Relay (D) Network card

Last Answer : (B) MODEM

Description : In a single stage network: (A) There is no redundancy (B) There is redundancy (C) Alternative cross points are available (D) Alternative paths are available

Last Answer : (B) There is redundancy

Description : The function of ARQ in a network protocol is to: (A) Auto request (B) Acknowledge (C) Address request (D) Abort

Last Answer : (A) Auto request

Description : In step by step switching line finders are connected to the (A) Calling subscriber. (B) Switching network. (C) Called subscriber. (D) Between exchanges.

Last Answer : (A) Calling subscriber.

Description : Trunks are the lines that run between (A) subscribers and exchange (B) switching system and power plant (C) Local Area Network (D) switching systems

Last Answer : (B) switching system and power plant

Description : For two stage network the switching elements for M inlets with r blocks and N outlets with s blocks is given by (A) Ms + Nr (B) Mr + Ns (C) (M + N) (r + s) (D) (M + N)rs

Last Answer : (A) Ms + Nr

Description : The final selector is connected to the (A) calling subscriber. (B) switching network. (C) called subscriber. (D) line finder.

Last Answer : (C) called subscriber

Description : A/An ______network is typically a company network that connects multiple company locations into a single network. (A) local area (B) enterprise (C) campus wide (D) protocol.

Last Answer : (B) enterprise

Description : In a LAN network every system is identified by (A) Name (B) MAC address (C) IP Address (D) Serial number given by manufacturer

Last Answer : (C) IP Address

Description : Trunks are the lines that run between (A) Subscribers and exchange (B) switching system and power plant (C) Local area network. (D) Switching stations.

Last Answer : (D) Switching stations.

Description : The ________is a circuit-switched network, while the ______is a packet-switched network. (A) Telephone, ATM (B) SONET and FDDI (C) Satellite, Telephone (D) FDDI and SONET

Last Answer : (A) Telephone, ATM

Description : If all devices are connected to a central hub, then topology is called A) Bus Topology B) Ring Topology C) Star Topology D) Tree Topology

Last Answer : C) Star Topology

Description : If all devices are connected to a central hub, then topology is called A) Bus Topology B) Ring Topology C) Star Topology D) Tree Topology

Last Answer : C) Star Topology

Description : Network components are connected to the same cable in the _____ topology. 1) Star 2) Ring 3) Bus 4) Mesh 5) Mixed

Last Answer : Answer :2

Description : Which network topology is consideredpassive? A. Cross B. Ring C. Star D. Mesh E. Bus

Last Answer : Bus

Description : FDDI isa A. ring network B. star network C. mesh network D. bus based network E. None of the above

Last Answer : ring network

Description : was the first step in the evolution of Ethernet from a coaxial cable bus to hub managed, twisted pair network. a. Star LAN b. Ring LAN c. Mesh LAN d. All of the above

Last Answer : a. Star LAN

Description : In a topology, if there are n devices in a network, each device has n-1 ports for cables. A) Mesh B) Star C) Bus D) Ring

Last Answer : A) Mesh

Description : Which one is not a network topology? a. Star b. Ring c. Bus d. Peer to Peer

Last Answer : d. Peer to Peer

Description : In which topology, if a computer’s network cable is broken, whole network goes down. a. Ring b. Star c. Bus d. token ring

Last Answer : c. Bus

Description : The network topology that is bi-directional links between each possible node. a. Star b. Mesh c. Bus d. Ring

Last Answer : b. Mesh

Description : ....... was the first step in the evolution of Ethernet from a coaxial cable bus to hub managed, twisted pair network. A) Star LAN B) Ring LAN C) Mesh LAN D) All of the above

Last Answer : A) Star LAN

Description : In a ................topology, if there are n devices in a network, each device has n-1 ports for cables. A) Mesh B) Star C) Bus D) Ring

Last Answer : A) Mesh

Description : 8............. was the first step in the evolution of Ethernet from a coaxial cable bus to hubmanaged, twisted pair network. A) Star LAN B) Ring LAN C) Mesh LAN D) All of the above

Last Answer : A) Star LAN

Description : In a................ topology, if there are n devices in a network, each device has n-1 ports for cables. A) Mesh B) Star C) Bus D) Ring

Last Answer : Mesh

Description : What is a Modem? What is the need of MODEM in data communication? Explain at least one modulation technique used for high speed modems.

Last Answer : Modems are essentially used to interface digital circuits to transmit information on analogue channels like telephone systems. Modem (from modulator-demodulator) is a device that modulates an analogue carrier ... caused by the lines makes the detection even harder than amplitude modulation.   

Description : Classify data networks. Explain with the help of Nyquist theorem, the data rate limitations in PSTN’s. Give an account of modems used in data transfer. Explain their importance and list some of the V-series recommendations.

Last Answer : Classifications of Data Network:  Data Networks are classified according to their geographical coverage: Wide area networks (WANs) Metropolitan area networks(MANs) Local area ...  V.53 Limits for the maintenance of telephone type circuits used for data transmission. 

Description : ARQ is transmitted in the event of: (A) Loss of signal (B) Error in received data (C) Improve reliability (D) During time out

Last Answer : (B) Error in received data

Description : In a time division space switch the size of the control memory is N and its Width: (A)Log10M (B) LogeM (C) LogNM (D) Log2M Where N are the outlets and M the number of data samples

Last Answer : Ans: (It should be 2 log2[N]

Description : Broad Band ISDN handles data rate of about (A) 64 kbps (B) 100 mbps (C) 5.4 mbps (D) 2.048 mbps

Last Answer : (A) 64 kbps

Description : Which transmission mode is used for data communication along telephone lines? (A) Parallel (B) Serial (C) Synchronous (D) Asynchronous

Last Answer : (B) Serial

Description : Common channel signalling______________ (A) Uses the speech or data path for signaling. (B) Does not use the speech or data path for signaling. (C) Needs no additional transmission facilities. (D) Finds it difficult to handle signaling during speech.

Last Answer : (C) Needs no additional transmission facilities.

Description : MAC is the abbreviation for: (A) Multimedia access control (B) Media access control (C) Mobile access control (D) Master access point control

Last Answer : (B) Media access control