plows are rows of concave steel discs that revolve as they are pulled. A. Disk. C) Chisel B. Tined. D) Sub soiling

plows are rows of concave steel discs that revolve as they are pulled. A. Disk. C) Chisel B. Tined. D) Sub soiling .
by

1 Answer

Answer :

Disk
by

Related questions

plows are preferable in the upland systems but as yet not widely available in Asia. A. Disk. C) Chisel B. Tined. D) Sub soiling

Description : plows are preferable in the upland systems but as yet not widely available in Asia. A. Disk. C) Chisel B. Tined. D) Sub soiling

Last Answer : Tined

what- A farmer plows rows in his field to sow crops. The border of his field is surrounded by a fence to keep out pests. If the two corners of the fence form right angles, which of the following statements is not necessarily true?

Description : what- A farmer plows rows in his field to sow crops. The border of his field is surrounded by a fence to keep out pests. If the two corners of the fence form right angles, which of the following statements is not necessarily true?

Last Answer : the sides of the fence are parallel to the rows of crops.

Tractor drawn disc harrows have concave discs of size varying from… diameter. a. 55-90cm b. 60-100cm d. None of the above

Description : Tractor drawn disc harrows have concave discs of size varying from… diameter. a. 55-90cm b. 60-100cm d. None of the above

Last Answer : Ans - c. 35-70cm

Mould board, disc, Chisel and Sub soil plough are the tillage equipments. b. Secondary c. post d. None of the above

Description : Mould board, disc, Chisel and Sub soil plough are the tillage equipments. b. Secondary c. post d. None of the above

Last Answer : Ans - a. Primary

are the primary tillage implements. A. Chisel plough and sub soiler C. Disc plough and disc harrow B. Chisel plough and disc harrow D. Leveler and clad crusher

Description : are the primary tillage implements. A. Chisel plough and sub soiler C. Disc plough and disc harrow B. Chisel plough and disc harrow D. Leveler and clad crusher

Last Answer : Chisel plough and sub soiler

plough is used to break through and shatter compacted or otherwise impermeable soil layers. A. Disc plough C. Chisel plough B. Sub-soil plough D. None of the above

Description : plough is used to break through and shatter compacted or otherwise impermeable soil layers. A. Disc plough C. Chisel plough B. Sub-soil plough D. None of the above

Last Answer : Chisel plough

The most common type of equipment used in farms include balers, plows, mowers and A. Tractor. C. Car

Description : The most common type of equipment used in farms include balers, plows, mowers and A. Tractor. C. Car

Last Answer : Tractor

This type of plough penetrate deeper than the conventional cultivation machinery and break up the layers of the soil. a. Chisel plough b. Disc plough d. None of the above

Description : This type of plough penetrate deeper than the conventional cultivation machinery and break up the layers of the soil. a. Chisel plough b. Disc plough d. None of the above

Last Answer : Ans - c. sub-soiler plough

The following types of blades are used with the rotor in rotary tiller a. ‗L‘ type blade c) both A & B b. Twisted blade d) chisel plough

Description : The following types of blades are used with the rotor in rotary tiller a. ‗L‘ type blade c) both A & B b. Twisted blade d) chisel plough

Last Answer :  both A & B

Ploughs used to break through shatter compacted or imperable soil layers. a) Disc plough b) Mold board plough c) Chisel plough d) Country plough

Description : Ploughs used to break through shatter compacted or imperable soil layers. a) Disc plough b) Mold board plough c) Chisel plough d) Country plough

Last Answer : Chisel plough

Cold chisel & hammers are made of (A) High speed steel (B) High carbon steel (C) Forged steel (D) Mild steel

Description : Cold chisel & hammers are made of (A) High speed steel (B) High carbon steel (C) Forged steel (D) Mild steel

Last Answer : (B) High carbon steel

is a circular concave revolving steel plate using for cutting and inverting the soil. a. Gang bolt. c. Disc b. Bearing d. None

Description : is a circular concave revolving steel plate using for cutting and inverting the soil. a. Gang bolt. c. Disc b. Bearing d. None

Last Answer : Bearing 

Moist atmospheric air at high temperature (e.g., in summer) having high concentration of sulphur dioxide causes(A) Fading of dyes on textiles(B) Corrosion, tarnishing & soiling of metals(C) Reduced strength of textiles(D) All (A), (B) and (C)

Description : Moist atmospheric air at high temperature (e.g., in summer) having high concentration of sulphur dioxide causes (A) Fading of dyes on textiles (B) Corrosion, tarnishing & soiling of metals (C) Reduced strength of textiles (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

A cylinder can be created by drawing a rectangular shape using the ________ tool. a.revolve b.sweep c.extrude d.all of the above

Description : A cylinder can be created by drawing a rectangular shape using the ________ tool. a.revolve b.sweep c.extrude d.all of the above

Last Answer : a.revolve

To create a hollow part, which of the following command would be most efficient a.Extrude b.Sweep c.Shell d.Revolve

Description : To create a hollow part, which of the following command would be most efficient a.Extrude b.Sweep c.Shell d.Revolve

Last Answer : c.Shell

________ command gives an array of object in 3D modeling a.Extrude b.Revolve c.Pattern d.All of the above

Description : ________ command gives an array of object in 3D modeling a.Extrude b.Revolve c.Pattern d.All of the above

Last Answer : c.Pattern

To create a hollow part, which of the following command would be most efficient? a.Extrude b.Sweep c.Shell d.Revolve

Description : To create a hollow part, which of the following command would be most efficient? a.Extrude b.Sweep c.Shell d.Revolve

Last Answer : c.Shell

The spacing between the discs in the gang bolt ranges cm for lighy duty and cm heavy -duty harrows i. 15-25 and 25-30 c) 40-45 and 45-50 ii. 20-30 and 30-40. d) 15-25 and 32-36

Description : The spacing between the discs in the gang bolt ranges cm for lighy duty and cm heavy -duty harrows i. 15-25 and 25-30 c) 40-45 and 45-50 ii. 20-30 and 30-40. d) 15-25 and 32-36

Last Answer : 15-25 and 25-30

A set of discs are mounted on the i. Gang bolt c) Both a) and b) ii. Arbor bolt. d) Non of the above

Description : A set of discs are mounted on the i. Gang bolt c) Both a) and b) ii. Arbor bolt. d) Non of the above

Last Answer : Both a) and b)

Each set of discs that are mounted on a common shaft is called as i. Spool. c) Bearing ii. Gang. d) Gang control

Description : Each set of discs that are mounted on a common shaft is called as i. Spool. c) Bearing ii. Gang. d) Gang control

Last Answer : Gang

The spacing between two adjacent discs in Olpad thresher is a) 5 cm b) 10 cm c) 15 cm d) 20 cm

Description : The spacing between two adjacent discs in Olpad thresher is a) 5 cm b) 10 cm c) 15 cm d) 20 cm

Last Answer : 15 cm

Lister plows especially suitable for a.) Dry land agriculture. b.) Breaking hard pan. c.) Earthing plants. d.) Mulching.

Description : Lister plows especially suitable for a.) Dry land agriculture. b.) Breaking hard pan. c.) Earthing plants. d.) Mulching.

Last Answer : a.) Dry land agriculture.

Drawing of number of copies of the same image in rows and columns acrossthe interface window so that they cover the entire window is called a.Roaming b.Panning c.Zooming d.Tiling

Description : Drawing of number of copies of the same image in rows and columns acrossthe interface window so that they cover the entire window is called a.Roaming b.Panning c.Zooming d.Tiling

Last Answer : d.Tiling

is pulled and guided from single hitch point but its weight is not supported by the tractor. A. Trailed type implement C. Semi mounted type implemented B. Mounted type implemented D. Automatic implemented

Description : is pulled and guided from single hitch point but its weight is not supported by the tractor. A. Trailed type implement C. Semi mounted type implemented B. Mounted type implemented D. Automatic implemented

Last Answer : Trailed type implement

An implement that pulled and guided by single hitch point of a tractor is: a) Trailed implement c) Mounted implement b) Semi mounted implements d) All are correct

Description : An implement that pulled and guided by single hitch point of a tractor is: a) Trailed implement c) Mounted implement b) Semi mounted implements d) All are correct

Last Answer : Trailed implement

It is intercultural implement used for removing shallow rooted weeds in between crop rows. a. Cono weeder b. Junior hoe d. None of above

Description : It is intercultural implement used for removing shallow rooted weeds in between crop rows. a. Cono weeder b. Junior hoe d. None of above

Last Answer : Ans- c. Sweep

Paddy cono weeder is useful for. a) Weeding between rows of crops like cotton for sugarcane. b) For uprooting and burying weeds in between standing rows of rice crops in in wetland. c) For weeding in raw crops in rain fed. d) For placing seed in continuous flow.

Description : Paddy cono weeder is useful for. a) Weeding between rows of crops like cotton for sugarcane. b) For uprooting and burying weeds in between standing rows of rice crops in in wetland. c) For weeding in raw crops in rain fed. d) For placing seed in continuous flow.

Last Answer : For uprooting and burying weeds in between standing rows of rice crops in in wetland.

equipment is used for wedding in between rows of standing crops. a) Engine operated weeder b) Cono weeder for puddy c) Junior how d) Dry land weeder

Description : equipment is used for wedding in between rows of standing crops. a) Engine operated weeder b) Cono weeder for puddy c) Junior how d) Dry land weeder

Last Answer : Junior how

is useful for uprooting and burying weeds between standing rows of rice crops in wetlands a) Sweep b) Engine operated weeder c) Cono weeder for paddy d) Dry land weeder

Description : is useful for uprooting and burying weeds between standing rows of rice crops in wetlands a) Sweep b) Engine operated weeder c) Cono weeder for paddy d) Dry land weeder

Last Answer :   <!-- [endif] -->Cono weeder for paddy

It has Staggered pegs in two rows at Spacing. A. 100 mm. C. 400 mm B. 200 mm D. 50 mm

Description : It has Staggered pegs in two rows at Spacing. A. 100 mm. C. 400 mm B. 200 mm D. 50 mm

Last Answer : 200 mm

A steel rod 1 metre long having square cross section is pulled under a tensile load of 8 tonnes. The extension in the rod was 1 mm only. If Esteel = 2 × 106 kg/cm2 , the side of the rod, is (A) 1 cm (B) 1.5 cm (C) 2 cm (D) 2.5 cm

Description : A steel rod 1 metre long having square cross section is pulled under a tensile load of 8 tonnes. The  extension in the rod was 1 mm only. If Esteel = 2 × 106  kg/cm2 , the side of the rod, is  (A) 1 cm  (B) 1.5 cm  (C) 2 cm  (D) 2.5 cm 

Last Answer : (C) 2 cm 

Do you buy clothes in a chisel?

Description : Or are you just buying new things?

Last Answer : I only occasionally buy a men's shirt in a chisel, which I cut my sleeve at home just above the slit to the cuff and wear it on a T-shirt at home. And a scarf, I'll look at the ... otherwise. I feel like I have old rags at home. In addition, Vietnamese new clothes have almost the same price.

What is the difference between firmer chisel and Mortise chisel?

Description : What is the difference between firmer chisel and Mortise chisel?

Last Answer : Feel Free to Answer

Encrusted dirt accumulated inside a motor should be removed with a _____________. A. fiber scraper B. pointed welding rod C. hammer and chisel D. paint scraper

Description : Encrusted dirt accumulated inside a motor should be removed with a _____________. A. fiber scraper B. pointed welding rod C. hammer and chisel D. paint scraper

Last Answer : Answer: A

Which plough will be used for maximum moisture conservation ? a. M B Plugh b. Cultivator c. Chisel plough d. Disc harrow

Description : Which plough will be used for maximum moisture conservation ? a. M B Plugh b. Cultivator c. Chisel plough d. Disc harrow

Last Answer : c. Chisel plough

Which plough will be used for maximum moisture conservation ? a. M B Plugh b. Cultivator c. Chisel plough d. Disc harrow

Description : Which plough will be used for maximum moisture conservation ? a. M B Plugh b. Cultivator c. Chisel plough d. Disc harrow

Last Answer : c. Chisel plough

The type of ashlar masonry in which stones are finely chisel dressed and thickness of joints does not exceed 3 mm, is (A) Chamfered ashlar masonry (B) Ashlar facing masonry (C) Random coursed ashlar masonry (D) Coursed ashlar masonry

Description : The type of ashlar masonry in which stones are finely chisel dressed and thickness of joints does not exceed 3 mm, is (A) Chamfered ashlar masonry (B) Ashlar facing masonry (C) Random coursed ashlar masonry (D) Coursed ashlar masonry

Last Answer : Answer: Option D

For maximum moisture conservation ploughing is done with A. mb plough b. cultivator c. chisel plough d. dice harrow

Description : For maximum moisture conservation ploughing is done with A. mb plough b. cultivator c. chisel plough d. dice harrow

Last Answer : c. chisel plough

Trimming of AT weld should be done by ? (i) Chisel (ii) Trimmer* (iii) Both (iv) None of the above

Description : Trimming of AT weld should be done by ? (i) Chisel (ii) Trimmer* (iii) Both (iv) None of the above

Last Answer : ii) Trimmer*

This type threasher consist of spike tooth cylinder, woven wire mesh concave and upper casing provide with helical louvers. a. Hammer mill c. Dummy d. None of above

Description : This type threasher consist of spike tooth cylinder, woven wire mesh concave and upper casing provide with helical louvers. a. Hammer mill c. Dummy d. None of above

Last Answer : Ans-    b. Axial flow

This type thresher consists of beater mounted on a shaft which rotates inside a closed casing and concave. a. Hammer mill b. Spike tooth d. None of above

Description : This type thresher consists of beater mounted on a shaft which rotates inside a closed casing and concave. a. Hammer mill b. Spike tooth d. None of above

Last Answer : Ans-                             c. Dummy

Different parts of Thresher are A) Feeding device B) Threshing cylinder C) Concave D) All of the above.

Description : Different parts of Thresher are A) Feeding device B) Threshing cylinder C) Concave D) All of the above.

Last Answer : All of the above.

The threshing efficiency of thresher depends on a) Cylinder peripheral speed b) Cylinder concave clearance c) Feed rate, moisture content and type of crop d) All are correct

Description : The threshing efficiency of thresher depends on a) Cylinder peripheral speed b) Cylinder concave clearance c) Feed rate, moisture content and type of crop d) All are correct

Last Answer :  All are correct

The takes place between the cylinder and concave units of the combine. a) Threshing b) Feeding drum c) Straw spreader d) Separating

Description : The takes place between the cylinder and concave units of the combine. a) Threshing b) Feeding drum c) Straw spreader d) Separating

Last Answer : Threshing 

Identify the picture. a) Concave clearance b) Sieve clearance c) Concave units d) Grain sieve

Description : Identify the picture. a) Concave clearance b) Sieve clearance c) Concave units d) Grain sieve

Last Answer : Concave clearance

are mounted on the Periphery of a cylinder that rotates inside a closed casing and concave. a) Dummy type c) spike-tooth type b) Hummer type d) Axial flow type

Description : are mounted on the Periphery of a cylinder that rotates inside a closed casing and concave. a) Dummy type c) spike-tooth type b) Hummer type d) Axial flow type

Last Answer : spike-tooth type

t consists of spike tooth cylinder, woven- wire mesh concave and upper casing provided with helical concave. a) Dummy type c) Spike-tooth type b) Hummer type d) Axial flow type

Description : It consists of spike tooth cylinder, woven- wire mesh concave and upper casing provided with helical concave. a) Dummy type c) Spike-tooth type b) Hummer type d) Axial flow type

Last Answer : Axial flow type

It consists of beats mounted on a shaft which rotates inside a closed casing and concave. a) Dummy type c) Spike-tooth type c) Hummer type d) Axial flow type

Description : It consists of beats mounted on a shaft which rotates inside a closed casing and concave. a) Dummy type c) Spike-tooth type c) Hummer type d) Axial flow type

Last Answer : Dummy type

The satellites which revolve in such an orbit, so that they move with earth rotation are called: A. Geo satellites B. Stationary satellites C. Geo-stationary satellites D. Earth-space satellites

Description : The satellites which revolve in such an orbit, so that they move with earth rotation are called: A. Geo satellites B. Stationary satellites C. Geo-stationary satellites D. Earth-space satellites

Last Answer : ANSWER: C