Disc plough is more useful for a) Shallow ploughing b) Fast ploughing c) Deep ploughing d) Slow ploughing

1 Answer

Answer :

   <!-- [endif] -->Deep ploughing


Related questions

Description : Subsoil plough is useful for — a. for deep ploughing b. to break hard pan of soil c. Shallow ploughin

Last Answer : b. to break hard pan of soil

Description : The draft requirement in MB plough compared to disc plough for same depth of ploughing is: a) Less c) More b) Equal d) None of these

Last Answer : More

Description : is a method of ploughing in which the soil broken and turn along the contours. a. Normal ploughing c. Contour ploughing b. Sub soil plough. d. Disc plough

Last Answer : Contour ploughing

Description : According to CRIDA 25 to 30 cm ploughing is — a. Shallow b. Medium c. Deep d. None of these

Last Answer : c. Deep

Description : It Is used for deep tillage and penetration of soil for storage for rain water in crop root zone. b. Disc plough c. Mould board plough d. None of the above

Last Answer : Ans- a. Chisel plough

Description : Subsoiler plough is best suited for a. breaking hard pan b. deep ploughing c. making ditches d. inter cultivation

Last Answer : a. breaking hard pan

Description : The power tillage is most suitable for: a) Stationary operation c) Deep ploughing b) Rotary operation d) All are correct

Last Answer : Rotary operation

Description : In comparison to MB plough, the draft is less in disc plough because a) It roll over the soil instead of sliding b) It has lower contact area c) It has larger cutting edge d) None of these Ans. a

Last Answer : ans a

Description : Working width of disc plough can be increased by a) Disc angle b) Gang angle c) Vertical suction d) Horizontal clearance Ans. a

Last Answer : ans a

Description : The adjustment in MB plough for increasing the depth of operation a) Vertical suction b) Horizontal suction c) Gang angle d) Disc angle Ans. a

Last Answer : ans a

Description : The two primary tillage equipments are 1. MB and disc harrow 2. Disc plough and disc harrow 3. Disc harrow and cultivator 4. MB and subsoiler

Last Answer : ans 4

Description : Dead furrow is made by 1. One way MB plough 2. 2 way MB plough 3. ridger 4. disc harrow

Last Answer : ans 1

Description : Which of the following is not a tractor drawn primary tillage tool? 1. Disc plough 2. rotavator 3. Country plough 4. Bar harrow

Last Answer : ans 3

Description : Which one of the following is not a secondary tillage tool? 1. Disc Plough 2. Disc harrow 3. Mould Board 4. none of these

Last Answer : ans 3

Description : This type of plough penetrate deeper than the conventional cultivation machinery and break up the layers of the soil. a. Chisel plough b. Disc plough d. None of the above

Last Answer : Ans - c. sub-soiler plough

Description : Disc angle in a standard disc plough varies from a. 25-35 ° c. 45-55 ° d. 55-65 °

Last Answer : Ans - b. 42-45 °

Description : Mould board, disc, Chisel and Sub soil plough are the tillage equipments. b. Secondary c. post d. None of the above

Last Answer : Ans - a. Primary

Description : Standard disc Plough consists of steel disc of _ diameter a) 20 to 40 cm. c) 60 to 90 cm b) 30 to 60 cm. d) 70 to 100 cm

Last Answer :  60 to 90 cm

Description : Select the types of Disc Plough? a) Standard disc Plough. c) Both a And b b) Vertical disc Plough. d) None of above

Last Answer : Both a And b

Description : Standerd disc plough consist of steel dics of… to……. CM diameter. a. 60,90 c) 60,80 b. 70,100. d) 70,90

Last Answer : 60,90

Description : The two primary tillage equipments are A. MB and disc harrow B. Disc plough and disc harrow C. Disc harrow and cultivator. D. MB and. Subscriber

Last Answer : MB and disc harrow

Description : Dead furrow is made by A. One way MB plough. B. 2 way MB plough C. Ridger. D. Disc harrow

Last Answer : One way MB plough

Description : is not a secondary tillage. A. Disc plough B. Plough C. Mould board D. None of these

Last Answer : disk plough,plough and mb plough are primary implement so answer is non of these

Description : Ploughs used to break through shatter compacted or imperable soil layers. a) Disc plough b) Mold board plough c) Chisel plough d) Country plough

Last Answer : Chisel plough

Description : The function of scraper is to . a) Remove soil stuck to the disc b) Provide support to the disc c) Used for holding plough d) None of the above

Last Answer : Remove soil stuck to the disc

Description : The disc angle of a good plough varies between a) 25°-30° b) 10°-15° c) 18°-24° d) 42°-45°

Last Answer : 42°-45°

Description : The components of disc plough are . a) Frame extension b) Top link connection c) Furrow wheel d) All of the above

Last Answer :    <!-- [endif] -->All of the above

Description : Standard disc plough contains steel disc of diameter. a) 10-30cm b) 30-60cm c) 60-90cm d) 90-120cm

Last Answer : 60-90cm

Description : Disc plough works in loose soil also without much clogging. a) True b) False

Last Answer : True

Description : is the mechanical manipulation of soil to provide favorable condition for crop production. A. Power tiller C. Rotary tiller B. Tillage D. Disc plough

Last Answer : Tillage 

Description : is the prime mover in which the direction of travel and its control for field operation is performed by the operator walking behind it. A. Power tiller C. Tillage B. Disc plough D. Rotary tiller

Last Answer : Power tiller

Description : . A Vertical disc plough is also termed as: a) Wheat plough c) Harrow plough b) Both (a) & (b) d) None of these

Last Answer : Both (a) & (b)

Description : Standard disc plough diameter size is A. 40 to 60 cm C. 70 to 90 cm B. 60 to 90 cm D. 50 to 70 cm

Last Answer : 60 to 90 cm

Description : Jointer and coulter are the parts of :- A. Disc plough C. Indigenous plough B. Harrow plough D. MB plough

Last Answer : MB plough

Description : are the primary tillage implements. A. Chisel plough and sub soiler C. Disc plough and disc harrow B. Chisel plough and disc harrow D. Leveler and clad crusher

Last Answer : Chisel plough and sub soiler

Description : plough is used to break through and shatter compacted or otherwise impermeable soil layers. A. Disc plough C. Chisel plough B. Sub-soil plough D. None of the above

Last Answer : Chisel plough

Description : is the following is not a secondary tillage tool A. Disc plough C. Mould board B. Disc harrow D. None of the above

Last Answer : disk harrow is secondry implement and mb plough and disk plouhg will be primarry implement

Description : Very often, the farmers add lime to the soil before ploughing because (a) high concentration of lime aids the plant growth (b) lime takes up the extra moisture of the soil (c) the soil becomes soft and it becomes easy to plough (d) lime decreases the acidity of the soil

Last Answer : Ans:(d)

Description : For maximum moisture conservation ploughing is done with A. mb plough b. cultivator c. chisel plough d. dice harrow

Last Answer : c. chisel plough

Description : Cultural practice reducing weed population a). Arresting flowering b). Deep ploughing c). Puddling d). All of these

Last Answer : d). All of these

Description : You have been referred a case of open angle glaucoma. Which of the following would be an important point in diagnosing the case? a. Shallow anterior chamber b. Optic disc cupping c. Narrow angle d. visual acuity and refractive error

Last Answer : ANSWER: B  

Description : Disc plough is used for

Last Answer : Ans.Deep ploughing in grassed field

Description : Tilt angle of a disc plough is generally— (A) 10° (B) 15° (C) 20° (D) 45°

Last Answer : (D) 45°

Description : The disc angle of a disc plough ranges from? [a] 40-45 degree [b] 30-35 degree [c] 20-25 degree [d] 45-50 degree [e] None of the above

Last Answer : [a] 40-45 degree

Description : Which plough will be used for maximum moisture conservation ? a. M B Plugh b. Cultivator c. Chisel plough d. Disc harrow

Last Answer : c. Chisel plough

Description : Which plough will be used for maximum moisture conservation ? a. M B Plugh b. Cultivator c. Chisel plough d. Disc harrow

Last Answer : c. Chisel plough

Description : Penetration of disc plough can be improved by a. Increasing disc angle b. Decreasing tilt angle c. Both a & b d. None of these

Last Answer : b. Decreasing tilt angle

Description : 1Heavy draft of a disc plough is due to: A. Blunt disc B. Furrows too wide C. Loose bearings D. All are currect

Last Answer : D. All are currect

Description : Land shaping becomes essential where often the following implement is used a) M.B. Plough b) Disc plough c) Cultivator d) All of the above

Last Answer : a) M.B. Plough

Description : In a disc plough with the increase in the disk angle, the transverse component of reaction will a)Increase b) Decrease c) Unaffected d) None of the above

Last Answer : a)Increase