Description : Standard disc Plough consists of steel disc of _ diameter a) 20 to 40 cm. c) 60 to 90 cm b) 30 to 60 cm. d) 70 to 100 cm
Last Answer : 60 to 90 cm
Description : Knife clips are placed with wearing plates spaced from cm apart. A) 10-20cm B) 60-90cm C) 15-25cm D) 20-30cm
Last Answer : 20-30cm
Description : Standard disc plough diameter size is A. 40 to 60 cm C. 70 to 90 cm B. 60 to 90 cm D. 50 to 70 cm
Description : Standerd disc plough consist of steel dics of… to……. CM diameter. a. 60,90 c) 60,80 b. 70,100. d) 70,90
Last Answer : 60,90
Description : Tractor drawn disc harrows have concave discs of size varying from… diameter. a. 55-90cm b. 60-100cm d. None of the above
Last Answer : Ans - c. 35-70cm
Description : The required spacing between the disc on the gang bolt ranges from 15 to 25 cm for light duty and 25 to 30cm for heavy duty harrows is b. 25 to 35cm c. 25 to 40cm d. None of the above.
Last Answer : <!-- [endif] -->Ans - a. 25 to 30cm
Description : Disc angle in a standard disc plough varies from a. 25-35 ° c. 45-55 ° d. 55-65 °
Last Answer : Ans - b. 42-45 °
Description : Select the types of Disc Plough? a) Standard disc Plough. c) Both a And b b) Vertical disc Plough. d) None of above
Last Answer : Both a And b
Description : The gang angle of disc harrow is adjusted in the range of: a) 0-30 c) 30-60 b) 60-90 d) Above 90
Last Answer : B
Description : A rod, 120cm long and of diameter 3.0 cm is subjected to an axial pull of 18 kN. The stress in N/mm2 is. a. 22.57 b. 23.47 c. 24.57 d. 25.47
Last Answer : d. 25.47
Description : In comparison to MB plough, the draft is less in disc plough because a) It roll over the soil instead of sliding b) It has lower contact area c) It has larger cutting edge d) None of these Ans. a
Last Answer : ans a
Description : Working width of disc plough can be increased by a) Disc angle b) Gang angle c) Vertical suction d) Horizontal clearance Ans. a
Description : The adjustment in MB plough for increasing the depth of operation a) Vertical suction b) Horizontal suction c) Gang angle d) Disc angle Ans. a
Description : The two primary tillage equipments are 1. MB and disc harrow 2. Disc plough and disc harrow 3. Disc harrow and cultivator 4. MB and subsoiler
Last Answer : ans 4
Description : Dead furrow is made by 1. One way MB plough 2. 2 way MB plough 3. ridger 4. disc harrow
Last Answer : ans 1
Description : Which of the following is not a tractor drawn primary tillage tool? 1. Disc plough 2. rotavator 3. Country plough 4. Bar harrow
Last Answer : ans 3
Description : Which one of the following is not a secondary tillage tool? 1. Disc Plough 2. Disc harrow 3. Mould Board 4. none of these
Description : This type of plough penetrate deeper than the conventional cultivation machinery and break up the layers of the soil. a. Chisel plough b. Disc plough d. None of the above
Last Answer : Ans - c. sub-soiler plough
Description : It Is used for deep tillage and penetration of soil for storage for rain water in crop root zone. b. Disc plough c. Mould board plough d. None of the above
Last Answer : Ans- a. Chisel plough
Description : Mould board, disc, Chisel and Sub soil plough are the tillage equipments. b. Secondary c. post d. None of the above
Last Answer : Ans - a. Primary
Description : is a method of ploughing in which the soil broken and turn along the contours. a. Normal ploughing c. Contour ploughing b. Sub soil plough. d. Disc plough
Last Answer : Contour ploughing
Description : The two primary tillage equipments are A. MB and disc harrow B. Disc plough and disc harrow C. Disc harrow and cultivator. D. MB and. Subscriber
Last Answer : MB and disc harrow
Description : Dead furrow is made by A. One way MB plough. B. 2 way MB plough C. Ridger. D. Disc harrow
Last Answer : One way MB plough
Description : is not a secondary tillage. A. Disc plough B. Plough C. Mould board D. None of these
Last Answer : disk plough,plough and mb plough are primary implement so answer is non of these
Description : Ploughs used to break through shatter compacted or imperable soil layers. a) Disc plough b) Mold board plough c) Chisel plough d) Country plough
Last Answer : Chisel plough
Description : The function of scraper is to . a) Remove soil stuck to the disc b) Provide support to the disc c) Used for holding plough d) None of the above
Last Answer : Remove soil stuck to the disc
Description : The disc angle of a good plough varies between a) 25°-30° b) 10°-15° c) 18°-24° d) 42°-45°
Last Answer : 42°-45°
Description : The components of disc plough are . a) Frame extension b) Top link connection c) Furrow wheel d) All of the above
Last Answer : <!-- [endif] -->All of the above
Description : Disc plough works in loose soil also without much clogging. a) True b) False
Last Answer : True
Description : Disc plough is more useful for a) Shallow ploughing b) Fast ploughing c) Deep ploughing d) Slow ploughing
Last Answer : <!-- [endif] -->Deep ploughing
Description : is the mechanical manipulation of soil to provide favorable condition for crop production. A. Power tiller C. Rotary tiller B. Tillage D. Disc plough
Last Answer : Tillage
Description : is the prime mover in which the direction of travel and its control for field operation is performed by the operator walking behind it. A. Power tiller C. Tillage B. Disc plough D. Rotary tiller
Last Answer : Power tiller
Description : The draft requirement in MB plough compared to disc plough for same depth of ploughing is: a) Less c) More b) Equal d) None of these
Last Answer : More
Description : . A Vertical disc plough is also termed as: a) Wheat plough c) Harrow plough b) Both (a) & (b) d) None of these
Last Answer : Both (a) & (b)
Description : Jointer and coulter are the parts of :- A. Disc plough C. Indigenous plough B. Harrow plough D. MB plough
Last Answer : MB plough
Description : are the primary tillage implements. A. Chisel plough and sub soiler C. Disc plough and disc harrow B. Chisel plough and disc harrow D. Leveler and clad crusher
Last Answer : Chisel plough and sub soiler
Description : plough is used to break through and shatter compacted or otherwise impermeable soil layers. A. Disc plough C. Chisel plough B. Sub-soil plough D. None of the above
Description : is the following is not a secondary tillage tool A. Disc plough C. Mould board B. Disc harrow D. None of the above
Last Answer : disk harrow is secondry implement and mb plough and disk plouhg will be primarry implement
Description : The type of bearing generally used to support the discs on a standard disc plough is: A. Ball bearing. B. Tapered roller bearing. C. Plain roller bearing. D. Bush bearing.
Last Answer : B. Tapered roller bearing.
Description : subsoilers are operated at maximum depth of: A.30-40cm B.45-75cm C.75-90cm D.10-20cm
Last Answer : B.45-75cm
Description : In a single threaded worm and worm wheel the number of teeth on the worm wheel is 60. The diameter of the effort wheel is 12 cm and that of load drum is 8 cm. The velocity ratio will be a.90 b.120 c.60 d.45 e.107 dynes
Last Answer : a. 90
Description : In a single threaded worm and worm wheel the number of teeth on the worm wheel is 80. The diameter of the effort wheel is 12 cm and that of load drum is 8 cm. The velocity ratio will be a.60 b.45 c.120 d.107 dynes e.90
Last Answer : c. 120
Description : The disc angle of a disc plough ranges from? [a] 40-45 degree [b] 30-35 degree [c] 20-25 degree [d] 45-50 degree [e] None of the above
Last Answer : [a] 40-45 degree
Description : The hp required to operate subsoil plough a) 10-20hp b) 20-30hp c) 60-100hp d) 140-200hp
Last Answer : 60-100hp
Description : the time taken to plough one acre farm with 35 hp tractor is : A)60 minutes b)75 minutes C)90 minutes d)120 minutes
Last Answer : b)75 minutes
Description : Assuming a standard 60 Hz. input to the circuit shown in the illustration, the ripple frequency would be ____________. EL-0085 A. 30 Hz B. 60 Hz C. 90 Hz D. 120 Hz
Last Answer : Answer: D
Description : A mixture of 90 kg of rava and sugar contains 90% of sugar. The new mixture is formed by adding 30 kg of sugar. What is the percentage of sugar in the new mixture? a) 45 1/2 b) 60 1/5 c) 45 1/2 d) 92 1/2 e) 98 1/2
Last Answer : Answer: D 90 kg = 81 kg sugar 9 kg rava Adding = 30 kg sugar Total = 111kg sugar 9kg rava (new) 111/120 × 100 = 92.5 =92 1 /2
Description : Is 10m greater than 120cm?
Last Answer : yes10.0m - 1.2m = 8.8m
Description : The penetration of a tandem disc harrow can be increased by a) Increasing tilt angle b) Increasing disc angle c) Increasing disc diameter d) All of the above Ans.c
Last Answer : Ans.c
Description : In slump test, each layer of concrete is compacted by a steel rod 60 cm long and of 16 mm diameter for (A) 20 times (B) 25 times (C) 30 times (D) 50 time
Last Answer : Answer: Option B