Description : The tilt angle varies form…° to….. °. For a good plough a. 20°,30°. c) 15°,30° b. 10°,30°. d) 15°,25°
Last Answer : 15°,25°
Description : Tilt angle of a disc plough is generally— (A) 10° (B) 15° (C) 20° (D) 45°
Last Answer : (D) 45°
Description : In a right angle bend of a road provided with a transition throughout, the maximum polar angle will be (A) 10° (B) 15° (C) 20° (D) 30°
Last Answer : Answer: Option B
Description : If a Lemniscate curve of transition throughout is introduced to connect two parallel roads, the maximum polar angle of the curve, is (A) 10° (B) 15° (C) 20° (D) 30°
Last Answer : Answer: Option D
Description : In standard disc plow the tilk angel varies between: A.30-40 ° B.40-45° C.20-25° D.2-3°
Last Answer : C.20-25°
Description : The angle in which a cricket ball should be hit to travel maximum horizontal distance is : (1) 60° with horizontal (2) 45° with horizontal (3) 30° with horizontal (4) 15° with horizontal
Last Answer : (2) 45° with horizontal Explanation: This has to do with the equation of a parabola or trajectory which is z = (tane)x 2 cos 9) 2. We can see that if the ball is fired at a 45 degree angle from the ground, the horizontal distance will be a maximum.
Last Answer : 45° with horizontal
Description : A ship strikes the berth generally at an angle (A) 90° with the face of the dock (B) 45° with the face of the dock (C) 30° with the face of the dock (D) 10° with the face of the dock
Last Answer : (D) 10° with the face of the dock
Description : In any good staircase, the maximum and minimum pitch respectively should be (A) 90° and 0° (B) 75° and 30° (C) 60° and 10° (D) 40° and 25°
Last Answer : Option D
Description : A 3 stack stepper motor with 12 numbers of rotor teeth has a step angle of ____________. (A) 12° (B) 8° (C) 24° (D) 10°
Last Answer : Ans. D Given m = 3, Nr = 12 Step angle = 360 / m x Nr = 360 /3 x 12 = 10°
Description : The maximum slope of a belt conveyor can be (A) 15° (B) 30° (C) 45° (D) 60
Last Answer : (B) 30°
Description : Disc angle in a standard disc plough varies from a. 25-35 ° c. 45-55 ° d. 55-65 °
Last Answer : Ans - b. 42-45 °
Description : A 4S diesel engine, when running at 2000 rpm has an injection duration of 1.5 ms.What is the corresponding of the crank angle in degrees? (a) 18° (b) 9° (c)36° (d) 15°
Last Answer : Ans :a
Description : In standard taper roller bearings, the angle of taper of the outer raceway is (a) 5° (b) 8° (c) 15° (d) 25°
Last Answer : (d) 25°
Description : An aircraft is travelling at 120 kts, what angle of bank would be required for a rate 1(one) turn? a. 30° b. 12° c. 18° d. 35°
Last Answer : c. 18°
Description : In disc ploughs tilt angel varies between b. 25-35° c. 35-45° d. 45-50°
Last Answer : Ans - a. 15-25°
Description : The magnetic bearing of a line is 32° and the magnetic declination is 10° 15' W. The true bearing is (A) 21° 45' (B) 42° 15' (C) 42° 15' W (D) 21° 45' W
Last Answer : (A) 21° 45'
Description : Tabling process used for separating two materials of different densities by passing the dilute pulp over a table/deck, which is inclined from the horizontal surface at an angle of about (A) 1 to 2° (B) 2 to 5° (C) 5 to 10° (D) 10 to 15°
Last Answer : (B) 2 to 5°
Description : The helix angle in case of closely coiled helical spring is (A) less than 10° (B) 10° to 15° (C) 15° to 20° (D) more than 20°
Last Answer : (A) less than 10°
Description : Match the following : [IAS 1999] A. Cotton 1. Rainfall 1000-1500 mm; Temperature 40°-60°C B. Flax 2. Rainfall 1500-2000 mm; Temperature 25°-35°C C. Sugarbeet 3. Rainfall 600-S00 mm; Temperature 5°-18°C D. Jute 4. Rainfall 500-1000 mm; ... 1 3 4 2 (b) 2 3 5 4 (c) 4 5 2 1 (d) 4 3 5 2 shop.ssbcrack.com
Last Answer : Ans: (d)
Description : If the angle of incidence formed on a concave mirror at a point is 30° then the angle of reflection will be: (1) 15° (2) 30° (3) 60° (4) 90°
Last Answer : (2) 30° Explanation: The angle between the incident ray and the normal is known as the angle of inci dence. The angle between the reflected ray and the normal is known as the angle of reflection.
Description : During a straight departure, the initial track is to be: a. Within 5° of runway centre-line b. Within 10 of runway centre-line c. Within 15° of runway centre-line d. Within 25° of runway centre-line
Last Answer : c. Within 15° of runway centre-line
Description : The angle of minimum deviation of an equiangular prism, having a refractive index of 1.732 is (a) 60° (b) 30° (c) 45° (d) 0°
Last Answer : Ans:(a)
Description : Projectile will attain its maximum range, if it is fired at an angle of A. 30° B. 47° C. 90° D. 45°
Last Answer : 45°
Description : For determining the support reactions at A and B of a three hinged arch, points B and Care joined and produced to intersect the load line at D and a line parallel to the load line through A at D'. Distances AD, DD ... reactions at A and B is (A) 30° (B) 45° (C) 60° (D) 90
Last Answer : (D) 90
Description : The angle of intersection of a contour and a ridge line, is (A) 30° (B) 45° (C) 60° (D) 90°
Last Answer : (D) 90°
Description : A well conditioned triangle has no angle less than (A) 20° (B) 30° (C) 45° (D) 60°
Description : The angle between two plane mirrors of optical square, is (A) 20° (B) 30° (C) 45° (D) 60°
Last Answer : (C) 45°
Description : A projectile is fired at an angle to the vertical. Its horizontal range will be maximum when is (A) 0° (B) 30° (C) 45° (D) 60°
Description : The maximum shear stress occurs on the filament which makes an angle with the horizontal plane equal to (A) 30° (B) 45° (C) 60° (D) 90
Last Answer : (B) 45°
Description : Select the incorrect statement. Effective angle of shearing resistance (A) Increases as the size of particles increases (B) Increases as the soil gradation improves (C) Is limited to a maximum value of 45° (D) Is rarely more than 30° for fine grained soil
Last Answer : (C) Is limited to a maximum value of 45°
Description : A cylindrical specimen of saturated soil failed under an axial vertical stress of 100kN/m² when it was laterally unconfmed. The failure plane was inclined to the horizontal plane at an angle of 45°. The values of cohesion and angle of ... N/mm² and 0° (C) 0.2 N/mm² and 0° (D) 0.05 N/mm² and 45°
Description : The anchorage value of a hook is assumed sixteen times the diameter of the bar if the angle of the bend, is (A) 30° (B) 40° (C) 45° (D) All the above
Description : Maximum number of vehicles can be parked with (A) Parallel parking (B) 30° angle parking (C) 45° angle parking (D) 90° angle parking
Description : Plywood is made by bonding together thin layers of wood in such a way that the angle between grains of any layer to grains of adjacent layers is (A) 0° (B) 30° (C) 45° (D) 90°
Description : Working width of disc plough can be increased by a) Disc angle b) Gang angle c) Vertical suction d) Horizontal clearance Ans. a
Last Answer : ans a
Description : The adjustment in MB plough for increasing the depth of operation a) Vertical suction b) Horizontal suction c) Gang angle d) Disc angle Ans. a
Description : An R.C.C. beam not provided with shear reinforcement may develop cracks in its bottom inclined roughly to the horizontal at (A) 25° (B) 35° (C) 45° (D) 55°
Last Answer : Answer: Option C
Description : Improved uniformity is obtained if seed tube is inclined rear ward at _________ with vertical. a)5-15° b)15-30° c)30-40° d)40-50
Last Answer : b)15-30°
Description : What is the orbit inclination of geostationary satellites? A. 0° B. 10° C. 20° D. 30°
Last Answer : A. 0°
Description : In inverting amplifier, the phase difference between input and output voltages must be A. 30° B. 45° C. 90° D. 180°
Last Answer : 180°
Description : For a parallel load on a fillet weld of equal legs, the plane of maximum shear occurs at (a) 22.5° (b) 30° (c) 45° (d) 60°
Last Answer : (c) 45°
Description : The value of 2 tan 2 45°+ cos 2 30° − sin 2 60° is (a) 0 (b) 1 (c) -2 (d) 2
Last Answer : (d) 2
Description : sin 2A = 2 sin A is true when A = a 30° b 45° c 0° d 60°
Last Answer : a 0
Description : Which of the following pipe bends will incur the largest head loss? (A) U-bend (B) 30° bend (C) 45° bend (D) 90° bend
Last Answer : (A) U-bend
Description : The zone in which transverse bending is likely to occur may be obtained by drawing a line from the (A) 30° (B) 45° (C) 60° (D) None of these
Description : In comparison to MB plough, the draft is less in disc plough because a) It roll over the soil instead of sliding b) It has lower contact area c) It has larger cutting edge d) None of these Ans. a
Description : The two primary tillage equipments are 1. MB and disc harrow 2. Disc plough and disc harrow 3. Disc harrow and cultivator 4. MB and subsoiler
Last Answer : ans 4