In ……levelling board is attached to the rear side of the unit for levelling the tilled soil. a. Disc b. Mould board d. None of the above

1 Answer

Answer :

Ans - c. Rotary tiller

Related questions

Description : It Is used for deep tillage and penetration of soil for storage for rain water in crop root zone. b. Disc plough c. Mould board plough d. None of the above

Last Answer : Ans- a. Chisel plough

Description : Mould board, disc, Chisel and Sub soil plough are the tillage equipments. b. Secondary c. post d. None of the above

Last Answer : Ans - a. Primary

Description : Which one of the following is not a secondary tillage tool? 1. Disc Plough 2. Disc harrow 3. Mould Board 4. none of these

Last Answer : ans 3

Description : is not a secondary tillage. A. Disc plough B. Plough C. Mould board D. None of these

Last Answer : disk plough,plough and mb plough are primary implement so answer is non of these

Description : is the following is not a secondary tillage tool A. Disc plough C. Mould board B. Disc harrow D. None of the above

Last Answer : disk harrow is secondry implement and mb plough and disk plouhg will be primarry implement

Description : is a Tillage system in which only isolated bands of soil are tilled? a) Strip Tillage. c) Mulch Tillage b) Rotary Tillage. d) Combined Tillage

Last Answer : Strip Tillage.

Description : plough leaves the soil in rough and more cloddy conditions. b. Mould board c. Both a And b d. None of the above

Last Answer : <!-- [if !supportLists] -->a.   <!-- [endif] -->Ans - a. Disc

Description : Ploughs used to break through shatter compacted or imperable soil layers. a) Disc plough b) Mold board plough c) Chisel plough d) Country plough

Last Answer : Chisel plough

Description : Which of the following is not a hand tool? 1. Mould Board 2. Shorel 3. Spade 4. Mamaunty

Last Answer : ans 1

Description : Which one of the following is an accessory to mould board plough? a. Share b. mould board c. frog

Last Answer :    <!-- [endif] -->  Ans- d. jointer

Description : Components of mold board plough a. Share. c) forg b. Mould board. d) All of the above

Last Answer : All of the above

Description : is not a hand tool. A. Mould board. B. Shovel C. Spade D. Mamounty

Last Answer : Mould board

Description : is known as ridging plough and double mould board plough. A. Bund former. C Puddler B. Leveller. D Ridger

Last Answer : Ridger

Description : Following is not a hand tool A. Mould board C. Shovel B. Spade D. Momaunty

Last Answer : Mould board

Description : Blades of disc harrow are sharpened from the_______ side penetrate more readily than blades sharpened from the__________ side a) convex, concave c) concave, convex b) Front, rear d) Rear, front

Last Answer : c) concave, convex

Description : Why Black Soil needs to be tilled after the first rains? -SST 10th

Last Answer : When wet, the Soil becomes sticky and difficult to work with. So, the Soil needs to be tilled after the first rains.

Description : The growing of grass or legumes in rotation with grain or tilled crops as a soil conservation measure is termed as? a. Crop rotation b. Ley farming c. Shifting cultivation d. Dairy farming e. Mixed farming

Last Answer : b. Ley farming

Description : .The land side of a mould board plough is made of: A. Malleable iron B. Forged steel C. C45 steel D. Soft Centre steel

Last Answer : D. Soft Centre steel

Description : owest specific energy requirement for the operation of rotavator is about _______ times as great as a mould board plough working in the same soil. a) Equal b) Twice c) Three d) Four

Last Answer : c) Three

Description : A slat mould board scours better than a solid mould board because of smaller contact area resulting in a) Reduction of adhesive force b) Increase in soil pressure c) Both (a) and (b) d) None of the above

Last Answer : c) Both (a) and (b)

Description : This type mould boars plough is used for sticky soil. b. Sod or breaker c. Stubble d. None of the above

Last Answer : Ans –a. Slat type

Description : This type mould boards plough is used for tough soil of grasses. a. slat c. Stubble d. None of the above

Last Answer : Ans- b. Sod or breaker

Description : is the component of mold board plough. a) Land side b) Soil c) Both a & b d) None

Last Answer : Land side

Description : Which end of the disc harrow penetrates deeply a) Concave b) Convex c) Rear d) Front

Last Answer : a) Concave

Description : Which end of disc harrow tends to penetrate more deeply a) Concave b) Convex c) Rear d) Front

Last Answer : a) Concave

Description : A mould board of MB plough is made of? a Cast iron b Chilled cast iron c Mild steel d Soft centre steel

Last Answer : d Soft centre steel

Description : .Increase length of a land slide of a one bottom right hand mould board plough will a) Increase the amount of offset on tractor b) Decrease the amount of offset c) No affect d) Affect Completely

Last Answer : c) No affect

Description : A low mold board with gradual twist that completely invert the furrow slice with a minimum of breakup, thus covering vegetative matter thoroughly is called a. Stubble bottom b. sod bottom c. salted mould board d. general purpose bottom

Last Answer : b. sod bottom

Description : The landside of a mould board plough is made of: a) Malleable iron b) Forged steel c) C45 steel d) Soft centre steel

Last Answer : d) Soft centre steel

Description : A power tiller is relatively more suitable for : A. Puddling of low land paddy fields with a rotary tiller B. Primary tillage of upland paddy fields with a rotary tillers C. Primary tillage with a mould board plough D. Farm transportation work

Last Answer : A. Puddling of low land paddy fields with a rotary tiller

Description : A relative short and broad mould board is curved rather abruptly near the top resulting in a greater degree of pulverization is called a. Sod bottom b. Stubble bottom b. General bottom d. Slat bottom

Last Answer : b. General bottom

Description : A long jow mould board with a gradual twist (spiral) that completely inverts the furrow slice with a minimum of break up thus covering vegetative matter thoroughly is called a. Sod bottom b. Stubble bottom c. General bottom d. Slat bottom

Last Answer : a. Sod bottom

Description : …………………………... moves the trash and roots from ahead of shin towords the main furrow so as 10 ensure complete coverage by the plough bottom a. Coulter b. Jointer c. Mould board d. Shin

Last Answer : b. Jointer

Description : A mould board plough bottom acts as a a. Single sided wedge b. Double sided wedge c. Three sided wedge d. All of the above

Last Answer : c. Three sided wedg

Description : Mould board are usually made from a. Soft centre steel b. Hardened carbon steel c. Chilled cast iron d. Mild steel

Last Answer : a. Soft centre steel

Description : Center of resistence of a mould board plow less at distance equal to A. 1/4th the size of plow from the share wing B. 3/4th the size of plow from the share wing C. 2/3th the size of plow from the share wing D. 1/3th the size of plow from the share wing

Last Answer : B. 3/4th the size of plow from the share wing

Description : harrow which consist of one or more blades attached to the beam Or frame, used for shallow working of the soil. A Spike tooth harrow B Acme harrow C Spring tooth harrow D Blade harrow

Last Answer : Blade harrow

Description : In comparison to MB plough, the draft is less in disc plough because a) It roll over the soil instead of sliding b) It has lower contact area c) It has larger cutting edge d) None of these Ans. a

Last Answer : ans a

Description : This type of plough penetrate deeper than the conventional cultivation machinery and break up the layers of the soil. a. Chisel plough b. Disc plough d. None of the above

Last Answer : Ans - c. sub-soiler plough

Description : The furrow opener used in black cotton soil is: A. Disc type B. Shoe type C. Reversible shovel type D. Hoe type

Last Answer : Hoe type

Description : is a circular concave revolving steel plate using for cutting and inverting the soil. a. Gang bolt. c. Disc b. Bearing d. None

Last Answer : Bearing 

Description : is a method of ploughing in which the soil broken and turn along the contours. a. Normal ploughing c. Contour ploughing b. Sub soil plough. d. Disc plough

Last Answer : Contour ploughing

Description : it is a device to remove soil that tends to stick to the working surface of a disc a) Disc c) Scraper b) Concavity. d) Til

Last Answer : Scraper

Description : The function of scraper is to . a) Remove soil stuck to the disc b) Provide support to the disc c) Used for holding plough d) None of the above

Last Answer : Remove soil stuck to the disc

Description : Disc plough works in loose soil also without much clogging. a) True b) False

Last Answer : True

Description : is the mechanical manipulation of soil to provide favorable condition for crop production. A. Power tiller C. Rotary tiller B. Tillage D. Disc plough

Last Answer : Tillage 

Description : plough is used to break through and shatter compacted or otherwise impermeable soil layers. A. Disc plough C. Chisel plough B. Sub-soil plough D. None of the above

Last Answer : Chisel plough

Description : The middle plastic part on my sims 3 disc is broken, but its still attached to the disc, how do I fix it

Last Answer : Need Answer

Description : In disc brake, the disc is attached to the (A) wheel (B) axle (C) suspension system (D) none of the above

Last Answer : (B) axle

Description : "Baby On Board". What would your rear window sticker say?

Last Answer : Dogmobile.