Which of the following is not a hand tool? 1. Mould Board 2. Shorel 3. Spade 4. Mamaunty

1 Answer

Answer :

ans 1

Related questions

Description : is not a hand tool. A. Mould board. B. Shovel C. Spade D. Mamounty

Last Answer : Mould board

Description : Following is not a hand tool A. Mould board C. Shovel B. Spade D. Momaunty

Last Answer : Mould board

Description : Which one of the following is not a secondary tillage tool? 1. Disc Plough 2. Disc harrow 3. Mould Board 4. none of these

Last Answer : ans 3

Description : is the following is not a secondary tillage tool A. Disc plough C. Mould board B. Disc harrow D. None of the above

Last Answer : disk harrow is secondry implement and mb plough and disk plouhg will be primarry implement

Description : .Increase length of a land slide of a one bottom right hand mould board plough will a) Increase the amount of offset on tractor b) Decrease the amount of offset c) No affect d) Affect Completely

Last Answer : c) No affect

Description : It Is used for deep tillage and penetration of soil for storage for rain water in crop root zone. b. Disc plough c. Mould board plough d. None of the above

Last Answer : Ans- a. Chisel plough

Description : In ……levelling board is attached to the rear side of the unit for levelling the tilled soil. a. Disc b. Mould board d. None of the above

Last Answer : Ans - c. Rotary tiller

Description : plough leaves the soil in rough and more cloddy conditions. b. Mould board c. Both a And b d. None of the above

Last Answer : <!-- [if !supportLists] -->a.   <!-- [endif] -->Ans - a. Disc

Description : Which one of the following is an accessory to mould board plough? a. Share b. mould board c. frog

Last Answer :    <!-- [endif] -->  Ans- d. jointer

Description : Mould board, disc, Chisel and Sub soil plough are the tillage equipments. b. Secondary c. post d. None of the above

Last Answer : Ans - a. Primary

Description : Components of mold board plough a. Share. c) forg b. Mould board. d) All of the above

Last Answer : All of the above

Description : is not a secondary tillage. A. Disc plough B. Plough C. Mould board D. None of these

Last Answer : disk plough,plough and mb plough are primary implement so answer is non of these

Description : is known as ridging plough and double mould board plough. A. Bund former. C Puddler B. Leveller. D Ridger

Last Answer : Ridger

Description : Which of the following tool is used for Windows for network queries from DNS lookups to trace routes? A. Sam Spade B. SuperScan C. NetScan D. Netcat

Last Answer : A. Sam Spade

Description : What Is The Use Of Spade, Spectacle, And Blind?

Last Answer : SPADE- Give space between two flanges and give flow through the spade. SPECTACLE – Combination of SPADE and BLIND and both option done in one flange. BLIND – Used for close the line.

Description : A mould board of MB plough is made of? a Cast iron b Chilled cast iron c Mild steel d Soft centre steel

Last Answer : d Soft centre steel

Description : .The land side of a mould board plough is made of: A. Malleable iron B. Forged steel C. C45 steel D. Soft Centre steel

Last Answer : D. Soft Centre steel

Description : A low mold board with gradual twist that completely invert the furrow slice with a minimum of breakup, thus covering vegetative matter thoroughly is called a. Stubble bottom b. sod bottom c. salted mould board d. general purpose bottom

Last Answer : b. sod bottom

Description : The landside of a mould board plough is made of: a) Malleable iron b) Forged steel c) C45 steel d) Soft centre steel

Last Answer : d) Soft centre steel

Description : A power tiller is relatively more suitable for : A. Puddling of low land paddy fields with a rotary tiller B. Primary tillage of upland paddy fields with a rotary tillers C. Primary tillage with a mould board plough D. Farm transportation work

Last Answer : A. Puddling of low land paddy fields with a rotary tiller

Description : owest specific energy requirement for the operation of rotavator is about _______ times as great as a mould board plough working in the same soil. a) Equal b) Twice c) Three d) Four

Last Answer : c) Three

Description : A relative short and broad mould board is curved rather abruptly near the top resulting in a greater degree of pulverization is called a. Sod bottom b. Stubble bottom b. General bottom d. Slat bottom

Last Answer : b. General bottom

Description : A long jow mould board with a gradual twist (spiral) that completely inverts the furrow slice with a minimum of break up thus covering vegetative matter thoroughly is called a. Sod bottom b. Stubble bottom c. General bottom d. Slat bottom

Last Answer : a. Sod bottom

Description : …………………………... moves the trash and roots from ahead of shin towords the main furrow so as 10 ensure complete coverage by the plough bottom a. Coulter b. Jointer c. Mould board d. Shin

Last Answer : b. Jointer

Description : A mould board plough bottom acts as a a. Single sided wedge b. Double sided wedge c. Three sided wedge d. All of the above

Last Answer : c. Three sided wedg

Description : Mould board are usually made from a. Soft centre steel b. Hardened carbon steel c. Chilled cast iron d. Mild steel

Last Answer : a. Soft centre steel

Description : Center of resistence of a mould board plow less at distance equal to A. 1/4th the size of plow from the share wing B. 3/4th the size of plow from the share wing C. 2/3th the size of plow from the share wing D. 1/3th the size of plow from the share wing

Last Answer : B. 3/4th the size of plow from the share wing

Description : A slat mould board scours better than a solid mould board because of smaller contact area resulting in a) Reduction of adhesive force b) Increase in soil pressure c) Both (a) and (b) d) None of the above

Last Answer : c) Both (a) and (b)

Description : This type mould boars plough is used for sticky soil. b. Sod or breaker c. Stubble d. None of the above

Last Answer : Ans –a. Slat type

Description : This type mould boards plough is used for tough soil of grasses. a. slat c. Stubble d. None of the above

Last Answer : Ans- b. Sod or breaker

Description : Three playing cards in a row. Can you name them with these clues? There is a two to the right of a king. A diamond will be found to the left of a spade. An ace is to the left of a heart. A heart is to the left of a spade. Now, identify all three cards. -Riddles

Last Answer : Ace of Diamonds, King of Hearts, Two of Spades.

Description : The dictionary imports the shovel for both. Then how do you know which one?

Last Answer : I checked it too, but the spade is the spade and the shovel is according to the Google translator. Of course he may be writing nonsense. 

Description : I already have a spade destroyed by stones and bumps. Do you think he will go babrousit?

Last Answer : If it's a quality spade, bring it to the blacksmith, it's a shame to just grind it.

Description : Is there a jack card that is also spade card?

Last Answer : There are four suits in a pack of 52 playing cards. Hearts, diamonds, spades and clubs. Each suit contain a Jack, so the answer is yes, there is a Jack of Spades.

Description : Is there a jack card that is also spade card?

Last Answer : There are four suits in a pack of 52 playing cards. Hearts, diamonds, spades and clubs. Each suit contain a Jack, so the answer is yes, there is a Jack of Spades.

Description : In SPADE system, how many PCM-encoded voice band channels are there? A. 800 B. 600 C. 300 D. 240

Last Answer : A. 800

Description : Find the probability of getting a spade. A. 1/26 B. 1/13 C. 1/52 D. 1/4

Last Answer : D. 1/4

Description : In spade farming for intercultural operation — is used a. Power operated instruments b. Manual labour c. Bullock power d. None of these

Last Answer : b. Manual labour

Description : Drivers are also known as: i. Spade ii. Test harness iii. Scaffolding a) i , ii are true and iii is false b) i , iii are true and ii is false

Last Answer : c) ii , iii are true and i is false

Description : ___for ping sweeps and port scanning a) Sam Spade b) SuperScan c) NetScan d) NetCat

Last Answer : b) SuperScan

Description : Network Testing and port scanning tools are : a. Sam Spade b. SuperScan c. NetScan d. All of the above

Last Answer : d. All of the above

Description : If you were to be personified as a hand tool, I.E. combination wrench, screwdriver, etc. what tool would you be?

Last Answer :

Description : What hand tool can get over 300 degrees?

Last Answer : Need answer

Description : What is the best hand tool to give as a gift?

Last Answer : That depends on what the person has.Most people will have the basic tools,but if not get them something they need.In general a small compact set they can carry with them easily gives the best use.For a younger person this is an excellent gift.

Description : Is there a tool that has a hand shovel and rake all in one?

Last Answer : Although I couldn't find a combination tool with both a hand shovel and a rake I did find a patent so look for a product on the market like this soon. You can find out more about the patent here- http://www.patentstorm.us/patents/6435580.html.

Description : Which hand tool should be used to inset a strike plate on a door jamb?

Last Answer : A wood chisel.

Description : What calibrated tool was the standard tool for engineers and scientists prior to the invention of the hand-held calculator?

Last Answer : Slide rule

Description : Which one of the following changes involved is irrelevant, in the evolution of man? (a) Perfection of hand for tool making (b) Change of diet from hard nuts and hard roots to soft food (c) Loss of tail (d) Increase in the ability to communicate with others and develop community behaviour

Last Answer : (b) Change of diet from hard nuts and hard roots to soft food

Description : From which of the following is not the main element of Flexible manufacturing system a.Work handling system b.Material handling system c.Tool handling system d.Main frame computer

Last Answer : a.Work handling system

Description : From the following which is not the application of AGV. a.Truck loading and unloading b.To change the tool c.Material transfer d.Paper roll transfer

Last Answer : b.To change the tool