The output of an exclusive–NOR gate is 1. Which input combination is correct?

The output of an exclusive–NOR gate is 1. Which input combination is correct? (1) A = 1, B = 0 (2) A = 0, B = 1 (3) A = 0, B = 0 (4) None of these 
by

1 Answer

Answer :

The output of an exclusive–NOR gate is 1. Which input combination is correct? (1) A = 1, B = 0 (2) A = 0, B = 1 (3) A = 0, B = 0 (4) None of these 

by

Related questions

How many minimum number of NOR gates are required to realize a two-input X-OR gate?

Description : How many minimum number of NOR gates are required to realize a two-input X-OR gate?

Last Answer : 5

The output of a 2-input NAND gate with high at both the inputs will be

Description : The output of a 2-input NAND gate with high at both the inputs will be • High • Low • High & low • None of the above.

Last Answer : The output of a 2-input NAND gate with high at both the inputs will be Low

DeMorgan’s first theorem shows the equivalence of (A) OR gate and Exclusive OR gate. (B) NOR gate and Bubbled AND gate. (C) NOR gate and NAND gate. (D) NAND gate and NOT gate

Description : DeMorgan’s first theorem shows the equivalence of (A) OR gate and Exclusive OR gate. (B) NOR gate and Bubbled AND gate. (C) NOR gate and NAND gate. (D) NAND gate and NOT gate

Last Answer : (B) NOR gate and Bubbled AND gate.

A NOR gate is equivalent to a bubbled AND gate. This statement is an outcome of:

Description : A NOR gate is equivalent to a bubbled AND gate. This statement is an outcome of: (1) De Morgan’s Law (2) Involution Law (3) Law of Absorption (4) Idempotent Law

Last Answer : A NOR gate is equivalent to a bubbled AND gate. This statement is an outcome of: De Morgan’s Law 

When A = 0., B = 0, C = 1 then in two input logic gate we get gate

Description :  When A = 0., B = 0, C = 1 then in two input logic gate we get gate  (A) XOR gate (B) AND gate (C) NAND gate (D) NOR gate

Last Answer :  When A = 0., B = 0, C = 1 then in two input logic gate we get gate NAND gate

The o/p of a 2 - input OR gate is 1 when its

Description : The o/p of a 2 - input OR gate is 1 when its   1. both inputs are 1 2. both inputs are 0 3.either input is 1 4. either input is 0 

Last Answer : The o/p of a 2 - input OR gate is 1 when its either input is 1 

An OR gate has 6 inputs. The number of input words in its truth table are

Last Answer : An OR gate has 6 inputs. The number of input words in its truth table are 64.

For a NAND gate, when one or more inputs are low then the output will be

Description :  For a NAND gate, when one or more inputs are low then the output will be A) Low B) High C) Alternately high and low D) High or low depending on relative magnitude of inputs 

Last Answer :  For a NAND gate, when one or more inputs are low then the output will be High 

Output of NAND gate is 0. for three inputs when:

Description : Output of NAND gate is 0. for three inputs when:

Last Answer : Output of NAND gate is 0. for three inputs when: all the inputs are 1

The gate whose output is LOW, if and only if all the inputs are HIGH, is

Description : The gate whose output is LOW, if and only if all the inputs are HIGH, is

Last Answer : The gate whose output is LOW, if and only if all the inputs are HIGH, is NAND

A gate in which all inputs must be low to get a high output is called

Last Answer : A gate in which all inputs must be low to get a high output is called A NOR gate.

Determine the output frequency for a frequency division circuit that contains 12 flip–flops with an input

Description : Determine the output frequency for a frequency division circuit that contains 12 flip–flops with an input clock frequency of 20.48 MHz: (1) 10.24 kHz (2) 5 kHz (3) 30.24 kHz (4) 15 kHz 

Last Answer : Determine the output frequency for a frequency division circuit that contains 12 flip–flops with an input clock frequency of 20.48 MHz: 5 kHz

The output Y of a 2-bit comparator is logic 1 whenever the 2-bit input A is greater than the 2-bit input B.

Description : The output Y of a 2-bit comparator is logic 1 whenever the 2-bit input A is greater than the 2-bit input B. The number of combinations for which the output is logic 1, is  (A) 4 (B) 6 (C) 8 (D) 10

Last Answer : The output Y of a 2-bit comparator is logic 1 whenever the 2-bit input A is greater than the 2-bit input B. The number of combinations for which the output is logic 1, is 6

In a logic circuit the NOR and NAND gate functions ____________. A. must be accomplished with a common base transistor arrangement B. are available in diode form C. are exact opposites with the same NOR and NAND inputs D. have output conditions that are exact opposites to the output condition for OR and AND, respectively

Description : In a logic circuit the NOR and NAND gate functions ____________. A. must be accomplished with a common base transistor arrangement B. are available in diode form C. are exact opposites with the ... . have output conditions that are exact opposites to the output condition for OR and AND, respectively

Last Answer : Answer: D

. What will be the output of an X-NOR gate when both inputs are LOW?

Description : . What will be the output of an X-NOR gate when both inputs are LOW?

Last Answer : HIGH.

In what state must the inputs to a NOR gate be in order to produce a logic 1 output?

Description : In what state must the inputs to a NOR gate be in order to produce a logic 1 output?

Last Answer : All inputs must be low.

What is the output Boolean expression for a NOR gate with R and T as inputs?

Description : What is the output Boolean expression for a NOR gate with R and T as inputs?

Last Answer : (R +T)’

What will be the output of a NOR gate when both inputs are HIGH?

Description : What will be the output of a NOR gate when both inputs are HIGH?

Last Answer : Low.

The NOR gate output will be low if the two inputs are (A) 00 (B) 01 (C) 10 (D) 11

Description : The NOR gate output will be low if the two inputs are (A) 00 (B) 01 (C) 10 (D) 11

Last Answer : A

The output of a logic gate is 1 when all its inputs are at logic 0. the gate is either (A) a NAND or an EX-OR (B) an OR or an EX-NOR (C) an AND or an EX-OR (D) a NOR or an EX-NOR

Description : The output of a logic gate is 1 when all its inputs are at logic 0. the gate is either (A) a NAND or an EX-OR (B) an OR or an EX-NOR (C) an AND or an EX-OR (D) a NOR or an EX-NOR

Last Answer : (D) a NOR or an EX-NOR

In a NOR gate all inputs must be - - - to get high output

Last Answer :  In a NOR gate all inputs must be Low to get high output

Which set of truth table input signals will result in an output signal value of 1 from the 'AND' gate as shown in the illustration? EL-0035 A. 1-Jan B. Jan-00 C. 0-1 D. 0-0

Description : Which set of truth table input signals will result in an output signal value of 1 from the 'AND' gate as shown in the illustration? EL-0035 A. 1-Jan B. Jan-00 C. 0-1 D. 0-0

Last Answer : Answer: A

A two-input X-OR gate will produce a HIGH output when the inputs are at what logic levels?

Description : A two-input X-OR gate will produce a HIGH output when the inputs are at what logic levels?

Last Answer : . One or the other of the inputs must be HIGH, but not both at the same time.

What is the output Boolean expression for an AND gate with A and B as inputs when the B input is inverted?

Description : What is the output Boolean expression for an AND gate with A and B as inputs when the B input is inverted?

Last Answer : AB

The output of two inputs OR gate is zero only when: (a) Both are one (b) Both are zero (c) Either input is 1 (d) None

Description : The output of two inputs OR gate is zero only when: (a) Both are one (b) Both are zero (c) Either input is 1 (d) None

Last Answer : (b) Both are zero

When an input signal A=11001 is applied to a NOT gate serially, its output signal is (A) 00111. (B) 00110. (C) 10101. (D) 11001.

Description : When an input signal A=11001 is applied to a NOT gate serially, its output signal is (A) 00111. (B) 00110. (C) 10101. (D) 11001.

Last Answer : When an input signal A=01001 is applied to a NOT gate serially , it's output signal is

The basic logic gate whose output is the complement of the input is the: -

Description : The basic logic gate whose output is the complement of the input is the: - a) OR gate b) AND gate c) inverter d) comparator

Last Answer : The basic logic gate whose output is the complement of the input is the: -  inverter

Read the following statements: i. Gate is a combinational logic. ii. JK Flip-flop in toggle mode is not

Description : Read the following statements: i. Gate is a combinational logic. ii. JK Flip-flop in toggle mode is not combinational logic. iii. MSJK Flip-flop suffers from race-around. iv. Counters are sequential circuits. Which choice is correct? (A) i, ii (B) i, ii, iv (C) ii, iii, iv (D) i, ii, iii

Last Answer : Read the following statements: i. Gate is a combinational logic. ii. JK Flip-flop in toggle mode is not combinational logic. iii. MSJK Flip-flop suffers from race-around. iv. Counters are sequential circuits. Which choice is ... (A) i, ii (B) i, ii, iv (C) ii, iii, iv (D) i, ii, iii

The fan put of a 7400 NAND gate is

Last Answer : The fan put of a 7400 NAND gate is 10TTL.

In case of OR gate, no matter what the number of inputs, a

Last Answer :  In case of OR gate, no matter what the number of inputs, a 1 at any input causes the output to be at logic 1.

An AND gate will function as OR if

Last Answer : An AND gate will function as OR if all the inputs and outputs are complemented.

A NAND gate is called a universal logic element because

Last Answer : A NAND gate is called a universal logic element because any logic function can be realized by NAND gates alone.

A NAND gate has:

Last Answer : A NAND gate has: LOW inputs and a HIGH output

In integrated circuit electronics the basic universal gate is

Last Answer : In integrated circuit electronics the basic universal gate is AND gate.

What is the purpose of a NAND gate?

Description : What is the purpose of a NAND gate?

Last Answer : Nand gate has 2 inputs and only 1 output and it is equivalent of an and gate. The output of a nand gate is high(1) only when anyone or both inputs are low(0).and the output of nand gate is low(0) only when both the inputs are high(1).nand gate is also called as universal gate.

What is an inverter gate?

Description : What is an inverter gate?

Last Answer : Not gate is known as inverter gate as it inverts the I/P

What does the AND gate do?

Description : What does the AND gate do?

Last Answer : AND gate multiple two inputs. If any one input is zero output will be zero if both inputs are one then only output is one.

Central Processing Unit is combination of A) Control and storage B) Control and output unit C) Arithmetic logic and input unit D) Arithmetic logic and control unit

Description : Central Processing Unit is combination of A) Control and storage B) Control and output unit C) Arithmetic logic and input unit D) Arithmetic logic and control unit

Last Answer : Answer : D

The purpose of a 'slew rate controller' in a circuit such as shown in the illustration is to ______________. EL-0096 A. limit the rate of change of a signal B. introduce a 'live zero' factor into the circuit C. shape the linear input into a non-linear output D. reduce air pressure to a value required by a combination circuit

Description : The purpose of a 'slew rate controller' in a circuit such as shown in the illustration is to ______________. EL-0096 A. limit the rate of change of a signal B. introduce a 'live zero' ... linear input into a non-linear output D. reduce air pressure to a value required by a combination circuit

Last Answer : Answer: A

Central Processing Unit is combination of a. Control and storage b. Control and output unit c. Arithmetic logic and input unit d. Arithmetic logic and control unit

Description : Central Processing Unit is combination of a. Control and storage b. Control and output unit c. Arithmetic logic and input unit d. Arithmetic logic and control unit

Last Answer : Arithmetic logic and control unit

Central Processing Unit is combination of a. Control and storage b. Control and output unit c. Arithmetic logic and input unit d. Arithmetic logic and control unit

Description : Central Processing Unit is combination of a. Control and storage b. Control and output unit c. Arithmetic logic and input unit d. Arithmetic logic and control unit

Last Answer : d. Arithmetic logic and control unit

A brand is BEST defined as a A)registered design or symbol that is displayed on the product. B)related group of words that describe the product. C)name, symbol, design, or combination of these that identifies a seller's products. D)copyrighted word(s) that give the manufacturer exclusive ownership

Description : A brand is BEST defined as a A)registered design or symbol that is displayed on the product. B)related group of words that describe the product. C)name, symbol, design, or combination of these that identifies a seller's products. D)copyrighted word(s) that give the manufacturer exclusive ownership

Last Answer : C)name, symbol, design, or combination of these that identifies a seller's products.

A bolometer is (A) Used for the measurement of thermal radiation (B) An element which senses optical input and delivers thermal output (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : A bolometer is (A) Used for the measurement of thermal radiation (B) An element which senses optical input and delivers thermal output (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

If the two input signals to a difference amplifier are equal in amplitude but neither in phase nor 180 degrees out of phase, what will the output signal be?

Description : If the two input signals to a difference amplifier are equal in amplitude but neither in phase nor 180 degrees out of phase, what will the output signal be?

Last Answer : . A different shape than the input signals but larger in amplitude.

In a certain electronic circuit the output is positive if input 1 is positive and input 2 is zero. If both inputs are positive the output is zero. This is: w) an AND circuit x) a NOR circuit y) an OR circuit z) a high-pass filter

Description : In a certain electronic circuit the output is positive if input 1 is positive and input 2 is zero. If both inputs are positive the output is zero. This is: w) an AND circuit x) a NOR circuit y) an OR circuit z) a high-pass filter

Last Answer : ANSWER: Y -- AN OR CIRCUIT

Which of the following logic operations is performed by the following given combinational circuit ? Image (A) EXCLUSIVE-OR (B) EXCLUSIVE-NOR (C) NAND (D) NOR

Description : Which of the following logic operations is performed by the following given combinational circuit ?  (A) EXCLUSIVE-OR (B) EXCLUSIVE-NOR (C) NAND (D) NOR

Last Answer : (A) EXCLUSIVE-OR

In successive approximation converter input to the comparator is through

Description : In successive approximation converter input to the comparator is through (A) DAC (B) Latch (C) Flip-flop (D) Sample and hold circuit

Last Answer : In successive approximation converter input to the comparator is through DAC 

IC which has quad 2 input AND gates

Description : IC which has quad 2 input AND gates   (A) 7411 (B) 7404 (C)7400 (D) 7408

Last Answer : IC which has quad 2 input AND gates 7408

In a JK flip-flop, for what input next state is complement of the present state

Description : In a JK flip-flop, for what input next state is complement of the present state (A)J=0,K=0 (B)J=1,K=0 (C)J=0,K=1 (D)J=1,K=1

Last Answer : In a JK flip-flop, for what input next state is complement of the present state (A)J=0,K=0 (B)J=1,K=0 (C)J=0,K=1 (D)J=1,K=1