Superposition theorem is not applicable to network containing: (1) Non linear element (2) Dependent voltage source (3) Dependent current source (4) Transformer. 

2 Answers

Answer :

Superposition theorem is not applicable to network containing: Non linear element 

Answer :

A

Related questions

Description : Castigliano's first theorem is applicable (A) For statically determinate structures only (B) When the system behaves elastically (C) Only when principle of superposition is valid (D) None of the above

Last Answer : (C) Only when principle of superposition is valid

Description : The superposition theorem is applicable to?

Last Answer : The superposition theorem is applicable to linear responses only.

Description : Besides a method of trial and error, which of the following methods is employed for solution of network problems in interconnected system ? (a) Circulating current method (b) Thevenin's theorem (c) Superposition of currents (d) Direct application of Kirehhoffs laws (e) All of the above

Last Answer : (e) All of the above

Description : Principle of superposition is applicable when (A) Deflections are linear functions of applied forces (B) Material obeys Hooke's law (C) The action of applied forces will be affected by small deformations of the structure (D) None of the above

Last Answer : (A) Deflections are linear functions of applied forces

Description : State and explain superposition theorem.

Last Answer : Superposition theorem states that: In a linear circuit with several sources the voltage and current responses in any branch is the algebraic sum of the voltage and current responses due to each source acting ... branch to find the response on the branch due to the combined effect of all the sources.

Description : State superposition theorem with suitable example

Last Answer : Superposition theorem: Superposition theorem states that in any linear network containing two or more sources, the response (current) in any element is equal to the algebraic sum of the ... by individual sources acting alone, while the other sources are replaced by their internal resistances.

Description : State Superposition Theorem.

Last Answer : Superposition Theorem: In any linear, bilateral, multisource network the voltage across or the current through any branch is given by algebraic sum of all individual voltages or currents caused ... sources acting alone with all other sources replaced by their internal resistances if any.

Description : State superposition theorem applied to D.C. circuits.

Last Answer : Superposition Theorem applied to D.C. circuits: Superposition theorem states that in any linear, bilateral, multisource network, the response (voltage across any element or current through any ... each source acting alone, while the other sources are replaced by their internal resistances.

Description : In application of superposition theorem, one is required to solve as many circuits as there are  1. Nodes 2. Branches 3. Meshes 4. Sources 

Last Answer : In application of superposition theorem, one is required to solve as many circuits as there are Sources 

Description : Which of the following statements is incorrect ? (A) Superposition theorem is useful for Linear and Non-linear circuit analysis when several sources are present in the circuit. (B) ... purely resistive, maximum power transfer is achieved under the condition : Load Resistance = Source Resistance

Last Answer : Which of the following statements is incorrect ? (A) Superposition theorem is useful for Linear and Non-linear circuit analysis when several sources are present in the circuit. ... purely resistive, maximum power transfer is achieved under the condition : Load Resistance = Source Resistance

Description : Superposition theorem stays valid for a : -  a) LTI system b) Discrete system c) LT systems d) None of these

Last Answer : Superposition theorem stays valid for a : - LTI system

Description : The superposition theorem requires as many circuits to be solved as there are?

Last Answer : The superposition theorem requires as many circuits to be solved as there are sources.

Description : The concept on which Superposition theorem is based is?

Last Answer : The concept on which Superposition theorem is based is linearity.

Description : Superposition theorem can be applied only to circuits having?

Last Answer : Superposition theorem can be applied only to circuits having linear bilateral elements.

Description : The superposition theorem is based on the concept of ?

Last Answer : The superposition theorem is based on the concept of Linearity.

Last Answer : Thesuperposition theoremforelectrical circuitsstates that for a linear system the response (voltageorcurrent) in any branch of a bilaterallinear circuithaving more than one independent source equals the ... alone, where all the other independent sources are replaced by their internalimpedances.

Description : Thevenin’s theorem can be applied to network containing : (A) Passive elements only (B) Active elements only (C) Linear elements only (D) All of these

Last Answer : C

Description : What is Bernoulli's theorem and where it is applicable?

Last Answer : Bernoulli's theorem states the "total energy of a liquid flowing from one point to another remains constant." It is applicable for non compressible liquids.

Description : Book packet containing greeting and invitations are given a) Transmission as applicable to second class mails b) Transmission as applicable to first class mails c) Surface transmission only with first class mails d) None of these

Last Answer : c) Surface transmission only with first class mails

Description : Charges for a book packet containing blind literature packet weighing 200gms. a) Free of cost b) Same rate as applicable for book post c) Same rate as applicable as letter d) None of these

Last Answer : a) Free of cost

Description : Production of beats is a result of the phenomenon of (a) Resonance (b) Interference (c) Reflection (d) Superposition

Last Answer : Ans:(b)

Description : The first critical speed of an automobile running on a sinusoidal road is calculated by (modeling it as a single degree of freedom system) A Resonance B Approximation C Superposition D Rayleigh quotient

Last Answer : A Resonance

Description : The first critical speed of an automobile running on a sinusoidal road is calculated by (modeling it as a single degree of freedom system) a) Resonance b) Approximation c) Superposition d) Rayleigh quotient

Last Answer : a) Resonance

Description : Define the principles of superposition of waves. 

Last Answer : Principle of superposition of wave: When two waves travelling through a medium arrive at a point simultaneously, each wave produces its own displacement at that point. The resultant displacement at that point is equal to the vector sum of the individual displacement of the two waves.

Description : Superposition 

Last Answer : Superposition 1 : https://youtu.be/3C3daEzmtuM Superposition 2 : https://youtu.be/mURACJC2jAU Superposition 3 : https://youtu.be/nG715RGdsvk Superposition 4 : https://youtu.be/qCHpYc8tOUs ... Superposition 9 : https://youtu.be/8cA91sqz2AI Superposition 10 : https://youtu.be/2nYcmOtRmaY

Description : Advantage of Gauss-Seidel method is a) applicable for large power system network b) calculation time for each iteration is less c) number of iterations are less d) all of the above

Last Answer : b) calculation time for each iteration is less

Description : To find current in a resistance connected in a network, Thevenin's theorem is used VTH = 20 V and RTH = 5 Ω. The current through the resistance: (1) is 4 A (2) is 4 A or less (3) is less than 4 A (4) May be 4 A or less or more than 4 A

Last Answer : To find current in a resistance connected in a network, Thevenin's theorem is used VTH = 20 V and RTH = 5 Ω. The current through the resistance: is less than 4 A 

Description : Norton’s theorem states that a complex network connected to a load can be replaced with an equivalent impedance (A) in series with a current source (B) in parallel with a voltage source (C) in series with a voltage source (D) in parallel with a current source

Last Answer : in parallel qith current source

Description : A network containing 50 buses in which 10 are the voltage control buses, 6 are the generator buses. Find the size of the Jacobian matrix. a) 84*84 b) 83*83 c) 34*34 d) 33*33

Last Answer : b) 83*83

Description : "In any network containing more than one sources of e.m.f. the current in any branch is the algebraic sum of a number of individual fictitious currents (the number being equal ... are equal to the internal resistances of the respective sources". The above statement is associated with?

Last Answer : "In any network containing more than one sources of e.m.f. the current in any branch is the algebraic sum of a number of individual fictitious currents (the number ... to the internal resistances of the respective sources". The above statement is associated with Superposition theorem.