Manganese steels (A) Are non-magnetic (B) Possess high electrical resistance (C) Possess low coefficient of expansion (D) All the above

Manganese steels
(A) Are non-magnetic
(B) Possess high electrical resistance
(C) Possess low coefficient of expansion
(D) All the above
by

1 Answer

Answer :

Answer: Option D
by

Related questions

Shock resisting steels should possess high (A) Hardness (B) Toughness (C) Tensile strength (D) Wear resistance

Description : Shock resisting steels should possess high (A) Hardness (B) Toughness (C) Tensile strength (D) Wear resistance

Last Answer : (B) Toughness

Weld decay occurs in which of the following steel types? a) Carbon/Manganese b) Low alloy c) Any stainless steel d) Austenitic stainless steels

Description : Weld decay occurs in which of the following steel types? a) Carbon/Manganese b) Low alloy c) Any stainless steel d) Austenitic stainless steels

Last Answer : d) Austenitic stainless steels

List two effects of manganese in plain carbon steels.

Description : List two effects of manganese in plain carbon steels.

Last Answer : Manganese increases tensile strength and hardness. It decreases weldability.

Discuss the role of manganese in alloying steels.

Description : Discuss the role of manganese in alloying steels.

Last Answer : Manganese is an excellent deoxidizer and sulfur neutralizer, and improves the mechanical properties of steel, notably the ratio of yield strength to tensile strength at normal temperatures. As ... increases the crack sensitivity of weldments, particularly with steels of higher carbon content.

Silico-manganese steels (containing 0.7% Mn, 0.5% C and 2% Si) (A) Do not require heat treatment for any of its applications (B) Are used for leaf and coiled springs (C) Do not have good resilience properties (D) Is tempered at 850°C

Description : Silico-manganese steels (containing 0.7% Mn, 0.5% C and 2% Si) (A) Do not require heat treatment for any of its applications (B) Are used for leaf and coiled springs (C) Do not have good resilience properties (D) Is tempered at 850°C

Last Answer : (B) Are used for leaf and coiled springs

Pick up the in-correct statement from the following: The soils which contain montmorillonite minerals (A) Swell more when wet (B) Shrink more when dry (C) Possess high plasticity(D) Possess high coefficient of internal coefficient

Description : Pick up the in-correct statement from the following: The soils which contain montmorillonite minerals (A) Swell more when wet (B) Shrink more when dry (C) Possess high plasticity (D) Possess high coefficient of internal coefficient

Last Answer : (D) Possess high coefficient of internal coefficient

Pick up the correct statement from the following: (A) Plastics have generally low melting point (B) The coefficient of thermal expansion of plastics is about three times than that of steel (C) The acoustical boards prepared by impregnating fibre-glass with phenolic resins has absorption coefficient of about 0.67 (D) All the above

Description : Pick up the correct statement from the following: (A) Plastics have generally low melting point (B) The coefficient of thermal expansion of plastics is about three times than that of steel (C) ... fibre-glass with phenolic resins has absorption coefficient of about 0.67 (D) All the above

Last Answer : Answer: Option D

Which of the following stainless steels is non-magnetic? (A) Ferritic (B) Martenistic (C) Austenitic

Description : Which of the following stainless steels is non-magnetic? (A) Ferritic (B) Martenistic (C) Austenitic

Last Answer : (C) Austenitic

Which of the following stainless steels is non-magnetic? (A) Ferritic (B) Martenistic (C) Austenitic (D) None of these

Description : Which of the following stainless steels is non-magnetic? (A) Ferritic (B) Martenistic (C) Austenitic (D) None of these

Last Answer : (C) Austenitic

When hot liquid is poured into a thick glass tumbler, it cracks because glass – (1) is a bad conductor of heat so only inner surface expands (2) has high temperature coefficient of expansion (3) has a very low specific heat (4) has low temperature coefficient of expansion

Description : When hot liquid is poured into a thick glass tumbler, it cracks because glass – (1) is a bad conductor of heat so only inner surface expands (2) has high temperature coefficient of expansion (3) has a very low specific heat (4) has low temperature coefficient of expansion

Last Answer : (1) is a bad conductor of heat so only inner surface expands Explanation: When hot liquid is poured into a thick glass tumbler, it cracks because glass is a bad conductor of heat so only inner surface expands.

Gas thermometers are more sensitive than the liquid thermometers because the gases – (1) have large coefficient of expansion (2) are lighter (3) have low specific heat (4) have high specific heat

Description : Gas thermometers are more sensitive than the liquid thermometers because the gases – (1) have large coefficient of expansion (2) are lighter (3) have low specific heat (4) have high specific heat

Last Answer : (1) have large coefficient of expansion Explanation: Gases are more sensitive to the temperature than liquids (such as mercury). That means gas expands more than the mercury for the same increase of temperature. Hence the has thermometer is more sensitive than liquid (mercury) thereto-meter.

Gas thermometers are more sensitive than the liquid thermometers because of the gases - (1) have low specific heat (2) have high specific heat (3) have large coefficient of expansion (4) are lighter

Description : Gas thermometers are more sensitive than the liquid thermometers because of the gases - (1) have low specific heat (2) have high specific heat (3) have large coefficient of expansion (4) are lighter

Last Answer : (1) have low specific heat Explanation: Gas thermometers are more sensitive because gas has low specific heat than liquids.

Gas thermometers are more sensitive than the liquid thermometers because the gases (1) have large coefficient of expansion (2) are lighter (3) have low specific heat (4) have high,specific heat

Description : Gas thermometers are more sensitive than the liquid thermometers because the gases (1) have large coefficient of expansion (2) are lighter (3) have low specific heat (4) have high,specific heat

Last Answer : have large coefficient of expansion

When hot liquid is poured into a thick glass tumbler, it cracks because glass : (1) is a bad conductor of heat so only inner surface expands (2) has high temperature coefficient of expansion (3) has a very low specific heat (4) has low temperature coefficient of expansion

Description : When hot liquid is poured into a thick glass tumbler, it cracks because glass : (1) is a bad conductor of heat so only inner surface expands (2) has high temperature coefficient of expansion (3) has a very low specific heat (4) has low temperature coefficient of expansion

Last Answer :  is a bad conductor of heat so only inner surface expands 

Pick out the wrong statement (A) Hardening makes the steel more brittle (B) High alloy steels contain more than 50% alloying element (C) 18/8 stainless steel is a magnetic steel (D) Both (B) and (C)

Description : Pick out the wrong statement (A) Hardening makes the steel more brittle (B) High alloy steels contain more than 50% alloying element (C) 18/8 stainless steel is a magnetic steel (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

The fractional change in resistance per kelvin is known as, a. temperature coefficient of resistance b. coefficient of Voltage of charge c. thermal expansion d. all of above

Description : The fractional change in resistance per kelvin is known as, a. temperature coefficient of resistance b. coefficient of Voltage of charge c. thermal expansion d. all of above

Last Answer : a. temperature coefficient of resistance

Generally __________ are subjected to galvanising (i.e., zinc coating). (A) Non-ferrous metals (B) Non-metals (C) Low carbon steels (D) Stainless steel

Description : Generally __________ are subjected to galvanising (i.e., zinc coating). (A) Non-ferrous metals (B) Non-metals (C) Low carbon steels (D) Stainless steel

Last Answer : (C) Low carbon steels

Which of the following alloy steels has the energy saving properties making it suitable for use in electrical machines? (A) Silicon steel (B) Chromium steel (C) Molybdenum steel (D) None of these

Description : Which of the following alloy steels has the energy saving properties making it suitable for use in electrical machines? (A) Silicon steel (B) Chromium steel (C) Molybdenum steel (D) None of these

Last Answer : (A) Silicon steel

Concrete containing (A) Siliceous aggregates, has higher co-efficient of expansion (B) Igneous aggregates, has intermediate coefficient of expansion (C) Lime stones, has lowest co-efficient of expansion (D) All the above

Description : Concrete containing (A) Siliceous aggregates, has higher co-efficient of expansion (B) Igneous aggregates, has intermediate coefficient of expansion (C) Lime stones, has lowest co-efficient of expansion (D) All the above

Last Answer : Answer: Option D

Concrete contains (i)Siliceous aggregates, having higher coefficient of expansion (ii)Igneous aggregates, having intermediate coefficient of expansion (iii)Lime stones, having lowest coefficient of expansion [ A ] i and iii [ B ] ii and iii [ C ] i and ii [ D ] i, ii and iii

Description : Concrete contains (i)Siliceous aggregates, having higher coefficient of expansion (ii)Igneous aggregates, having intermediate coefficient of expansion (iii)Lime stones, having lowest coefficient of expansion [ A ] i and iii [ B ] ii and iii [ C ] i and ii [ D ] i, ii and iii

Last Answer : [ D ] i, ii and iii

The plastics made from cellulose resin (A) Are as clear as glass (B) Are tough and strong (C) Possess excellent electrical properties (D) All the above

Description : The plastics made from cellulose resin (A) Are as clear as glass (B) Are tough and strong (C) Possess excellent electrical properties (D) All the above

Last Answer : Answer: Option D

Presence of SO2 in furnace gases attacks the ferrous metal by way of (A) Accelerating the rate of scaling (B) Causing metal embrittlement (C) Attacking the grain boundaries; particularly severe on low carbon and nickel bearing steels at high temperature (D) All (A), (B) and (C)

Description : Presence of SO2 in furnace gases attacks the ferrous metal by way of (A) Accelerating the rate of scaling (B) Causing metal embrittlement (C) Attacking the grain boundaries; particularly severe on low carbon and nickel bearing steels at high temperature (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Coarse grained steels have (A) Low toughness (B) No tendency to distort (C) High density (D) Very high toughness

Description : Coarse grained steels have (A) Low toughness (B) No tendency to distort (C) High density (D) Very high toughness

Last Answer : (B) No tendency to distort

Pick out the wrong statement pertaining to the properties of glasses. Glasses generally have (A) High electrical insulation properties (B) Sharp melting points (C) Low co-efficient of thermal expansion (D) Compressive strength much greater than their tensile strengths

Description : Pick out the wrong statement pertaining to the properties of glasses. Glasses generally have (A) High electrical insulation properties (B) Sharp melting points (C) Low co-efficient of thermal expansion (D) Compressive strength much greater than their tensile strengths

Last Answer : (B) Sharp melting points

Chrome vanadium steels usually contain 0.8 to 1.1% Cr, 0.25 to 0.35% C and < 0.25% V. It is (A) Used for making axle & shafts of aeroplanes, automobiles and locomotives (B) Having poor fatigue resistance (C) Having poor toughness (D) Not helpful in producing cleaner steel due to oxidising action of vanadium

Description : Chrome vanadium steels usually contain 0.8 to 1.1% Cr, 0.25 to 0.35% C and < 0.25% V. It is (A) Used for making axle & shafts of aeroplanes, automobiles and locomotives (B) ... resistance (C) Having poor toughness (D) Not helpful in producing cleaner steel due to oxidising action of vanadium

Last Answer : (A) Used for making axle & shafts of aeroplanes, automobiles and locomotives

Molybdenum steels containing 0.15 to 0.40% molybdenum (A) Are prone to temper brittleness (B) Are used for automobile parts like gears, axle, shaft, bearings etc. (C) Have very poor fatigue resistance

Description : Molybdenum steels containing 0.15 to 0.40% molybdenum (A) Are prone to temper brittleness (B) Are used for automobile parts like gears, axle, shaft, bearings etc. (C) Have very poor fatigue resistance

Last Answer : (B) Are used for automobile parts like gears, axle, shaft, bearings etc

Ferric stainless steels compared to austenitic stainless steels (A) Have lower corrosion resistance (B) Are harder to fabricate (C) Are less ductile and hence less suitable for cold pressing (D) All (A), (B) and (C)

Description : Ferric stainless steels compared to austenitic stainless steels (A) Have lower corrosion resistance (B) Are harder to fabricate (C) Are less ductile and hence less suitable for cold pressing (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

For aluminium, as compared to copper, all the following factors have higher values except (a) specific volume (6) electrical conductivity (c) co-efficient of linear expansion (d) resistance per unit length for same cross-section

Description : For aluminium, as compared to copper, all the following factors have higher values except (a) specific volume (6) electrical conductivity (c) co-efficient of linear expansion (d) resistance per unit length for same cross-section

Last Answer : (6) electrical conductivity

Acrylic sheets (A) Possess 10 to 17 times greater breakage resistance than that of glass of equivalent thickness (B) Are generally unaffected by most household detergents (C) Possess the light transmission rate of 93% (D) All the above

Description : Acrylic sheets (A) Possess 10 to 17 times greater breakage resistance than that of glass of equivalent thickness (B) Are generally unaffected by most household detergents (C) Possess the light transmission rate of 93% (D) All the above

Last Answer : Answer: Option D

What is an important requisite for fillers in dental composite restorative resins in load bearing areas: A. Sub micro sized particles B. High coefficient of thermal expansion C. High in content (High filler)

Description : What is an important requisite for fillers in dental composite restorative resins in load bearing areas: A. Sub micro sized particles B. High coefficient of thermal expansion C. High in content (High filler)

Last Answer : C. High in content (High filler)

Brass tubes are used in the manufacture of tubes of evaporators used in sugar and salt industries, mainly because of its (A) High co-efficient of thermal expansion (B) Low thermal conductivity (C) High corrosion resistance (D) All (A), (B) and (C)

Description : Brass tubes are used in the manufacture of tubes of evaporators used in sugar and salt industries, mainly because of its (A) High co-efficient of thermal expansion (B) Low thermal conductivity (C) High corrosion resistance (D) All (A), (B) and (C)

Last Answer : (C) High corrosion resistance

Superior quality laboratory apparatus is made of the __________ glass having low thermal co-efficient of expansion & high chemical resistance. (A) Flint (B) Soda (C) Pyrex (D) Potash

Description : Superior quality laboratory apparatus is made of the __________ glass having low thermal co-efficient of expansion & high chemical resistance. (A) Flint (B) Soda (C) Pyrex (D) Potash

Last Answer : (C) Pyrex

High copper amalgam lasts longer than low copper amalgam because of:** A. Increased compressive strength B. Increased corrosion resistance C. High creep D. Increased tensile strength E. Decreased setting expansion

Description : High copper amalgam lasts longer than low copper amalgam because of:**  A. Increased compressive strength  B. Increased corrosion resistance  C. High creep  D. Increased tensile strength  E. Decreased setting expansion 

Last Answer : A. Increased compressive strength 

The torsion resisting capacity of a given reinforced concrete section. (a) Decreases with decrease in stirrups spacing. (b) Decreases with increase in longitudinal bars. (c) Does not depend upon stirrups and longitudinal steels. (d) Increases with increase in stirrups and longitudinal steels.

Description : The torsion resisting capacity of a given reinforced concrete section. (a) Decreases with decrease in stirrups spacing. (b) Decreases with increase in longitudinal bars. (c) Does not depend upon stirrups and longitudinal steels. (d) Increases with increase in stirrups and longitudinal steels.

Last Answer : (d) Increases with increase in stirrups and longitudinal steels.

Low carbon steels are those in which carbon percentage is around (A) 0.1 to 0.35 (B) 0.4 to 0.7 (C) 0.8 to 1.5 (D) 1.5 to 2

Description : Low carbon steels are those in which carbon percentage is around (A) 0.1 to 0.35 (B) 0.4 to 0.7 (C) 0.8 to 1.5 (D) 1.5 to 2

Last Answer : (A) 0.1 to 0.35

Specialty low-alloy steel DMR-1700 a cost-effective replacement of mar- aging steels is product of (a) DLRL (b) DEAL (c) DMRL (d) DEBEL

Description : Specialty low-alloy steel DMR-1700 a cost-effective replacement of mar- aging steels is product of (a) DLRL (b) DEAL (c) DMRL (d) DEBEL

Last Answer : (c) DMRL

The primary function of an electric motor is to ___________. A. develop torque B. generate high voltages C. produce a magnetic field D. generate high electrical resistance

Description : The primary function of an electric motor is to ___________. A. develop torque B. generate high voltages C. produce a magnetic field D. generate high electrical resistance

Last Answer : Answer: A

Non-ferrous metals and hard steels do not exhibit a definite yield point, when pulled in the testing machine and hence for these cases, a better measure of their elastic properties is defined by the __________ stress. (A) Ultimate (B) Yield point (C) Proof (D) None of these

Description : Non-ferrous metals and hard steels do not exhibit a definite yield point, when pulled in the testing machine and hence for these cases, a better measure of their elastic properties is defined by the __________ stress. (A) Ultimate (B) Yield point (C) Proof (D) None of these

Last Answer : (C) Proof

The yield strength and tensile strength of low carbon steel may be improved by the addition of (A) Manganese (B) Chromium (C) Nickel (D) Vanadium

Description : The yield strength and tensile strength of low carbon steel may be improved by the addition of (A) Manganese (B) Chromium (C) Nickel (D) Vanadium

Last Answer : Answer: Option D

What, besides coefficient of expansion, could make two pieces of glass incompatible for firing together?

Description : What, besides coefficient of expansion, could make two pieces of glass incompatible for firing together?

Last Answer : Melting point would be my guess. The Fuseworks is for microwave kiln use.

The coefficient of x in the expansion of (x + 3)3 is -Maths 9th

Description : The coefficient of x in the expansion of (x + 3)3 is -Maths 9th

Last Answer : (d) Now, (x + 3)3 = x3 + 33 + 3x (3)(x + 3) [using identity, (a + b)3 = a3 + b3 + 3ab (a + b)] = x3 + 27 + 9x (x + 3) = x3 +27 + 9x2+27x Hence, the coefficient of x in (x + 3)3 is 27.

The coefficient of x in the expansion of (x + 3)3 is -Maths 9th

Description : The coefficient of x in the expansion of (x + 3)3 is -Maths 9th

Last Answer : (d) Now, (x + 3)3 = x3 + 33 + 3x (3)(x + 3) [using identity, (a + b)3 = a3 + b3 + 3ab (a + b)] = x3 + 27 + 9x (x + 3) = x3 +27 + 9x2+27x Hence, the coefficient of x in (x + 3)3 is 27.

Write the coefficient of y in the expansion of (5-y) to the whole square. -Maths 9th

Description : Write the coefficient of y in the expansion of (5-y) to the whole square. -Maths 9th

Last Answer : Solution :-

On which subject does the length expansion coefficient depend ?

Description : On which subject does the length expansion coefficient depend ?

Last Answer : : The length expansion coefficient depends on the temperature scale , the nature of the object.

What is the level of expansion coefficient ?

Description : What is the level of expansion coefficient ?

Last Answer : The levels of expansion coefficient are alpha , beta and gamma.

What is the unit of expansion coefficient ?

Last Answer : The unit of expansion coefficient is K ^ -1 .

Expansion Coefficient Who Say ?

Last Answer : difficult Of matter No One Direction Growth Says Length Expansion , area Growth Says Field Expansion And Of volume Growth Says Volume Expansion ! Expansion Coefficient Three Type.

Find the coefficient of `x^(3)` in the expansion of `(x^(2)+(1)/(3x^(3)))^(4)`

Description : Find the coefficient of `x^(3)` in the expansion of `(x^(2)+(1)/(3x^(3)))^(4)`

Last Answer : Find the coefficient of `x^(3)` in the expansion of `(x^(2)+(1)/(3x^(3)))^(4)`

Find the coefficient of `x^(-5)` in the expansion of `(2x^(2)-(1)/(5x))^(8)`

Description : Find the coefficient of `x^(-5)` in the expansion of `(2x^(2)-(1)/(5x))^(8)`

Last Answer : Find the coefficient of `x^(-5)` in the expansion of `(2x^(2)-(1)/(5x))^(8)`

The coefficient of `y^(7)` in the expansion of `(y+z)^(7)` is ____________

Description : The coefficient of `y^(7)` in the expansion of `(y+z)^(7)` is ____________

Last Answer : The coefficient of `y^(7)` in the expansion of `(y+z)^(7)` is ____________