For a prototype low pass filter, the series and shunt elements are respectively _____.

For a prototype low pass filter, the series and shunt elements are respectively _____.
by

1 Answer

Answer :

 For a prototype low pass filter, the series and shunt elements are respectively inductive and capacitive.

by

Related questions

The shunt element of prototype high pass filter is _____.

Description : The shunt element of prototype high pass filter is _____. 

Last Answer : The shunt element of prototype high pass filter is inductive. 

The values of L and C for a low pass filter with cut off frequency of 2.5 KHz and operating with a terminated

Description : The values of L and C for a low pass filter with cut off frequency of 2.5 KHz and operating with a terminated load resistance of 450 Ohm are given by  (a) 57.3 mH; 0.283 μF (b) 28.66 μH; 0.14 μF (c) 114.64 mH; 0.566 mF (d) 50.23 mH; 0.632 mF

Last Answer : The values of L and C for a low pass filter with cut off frequency of 2.5 KHz and operating with a terminated load resistance of 450 Ohm are given by 57.3 mH; 0.283 μF

Low pass filter with cut off frequency of 100 kHz and high pass filter with cut off frequency of

Description : Low pass filter with cut off frequency of 100 kHz and high pass filter with cut off frequency of 50 kHz are connected in tandem, the resultant filter is Low pass filter with cut off frequency of 100 kHz ... kHz Band pass filter with pass band from 50 kHz to 100 kHz. None of the above.

Last Answer : Low pass filter with cut off frequency of 100 kHz and high pass filter with cut off frequency of 50 kHz are connected in tandem, the resultant filter is Band pass filter with pass band from 50 kHz to 100 kHz.

write short notes on Low-pass filter.

Description : write short notes on Low-pass filter.

Last Answer : low-pass filter (1) filter exhibiting frequency selective characteristic that allows low-frequency components of an input signal to pass from filter input to output unattenuated all high-frequency components are ... the bandwidth of the filter. A filter whose impulse response is a low-pass signal.

State the advantages and disadvantages of series inductor and shunt capacitor filter.

Description : State the advantages and disadvantages of series inductor and shunt capacitor filter.

Last Answer : Advantages of series inductor filter 1. It has low ripple factor at heavy load currents (i.e. low load resistance) 2. It has no surge current through the diode. 3. It reduces the ripple in the DC ... . 3. It has low output voltages for heavy loads. 4. Ripple factor is dependent on the load.

What do you mean by active filter? State its advantages over passive filter . Define pass band & stop band with respect to filter.

Description : What do you mean by active filter? State its advantages over passive filter . Define pass band & stop band with respect to filter.

Last Answer : Active Filter: Active Filter is formed by using active element along with the passive components.  Advantages of Active filter over Passive filter: High value of pass band gain can be obtained. It is ... pass band.  Stop Band Filter: The frequency range which is attenuated is known as stop band.

A band pass filter is that which

Description : A band pass filter is that which

Last Answer : A band pass filter is that which passes signals between two frequency limits

To limit the current flow through a DC voltmeter to as low a value as possible, the moving coil circuit is provided with a/an _____________. A. high series resistance B. high parallel resistance C. series inductor D. external shunt

Description : To limit the current flow through a DC voltmeter to as low a value as possible, the moving coil circuit is provided with a/an _____________. A. high series resistance B. high parallel resistance C. series inductor D. external shunt

Last Answer : Answer: A

The most suitable servomotor for low power applications is (A) a dc series motor. (B) a dc shunt motor. (C) an ac two-phase induction motor. (D) an ac series motor.

Description : The most suitable servomotor for low power applications is (A) a dc series motor. (B) a dc shunt motor. (C) an ac two-phase induction motor. (D) an ac series motor.

Last Answer : (B) a dc shunt motor.

Harmonic suppressor connected to an antenna. A. Low-pass filter B. High-pass filter C. M-derived filter D. Constant-K

Description : Harmonic suppressor connected to an antenna. A. Low-pass filter B. High-pass filter C. M-derived filter D. Constant-K

Last Answer : A. Low-pass filter

How can intermodulation interference between two transmitters in close proximity reduced or eliminated? A. Through installing a band-pass filter in the antenna feed line B. Through installing terminated circulator or ferrite isolator in the feed line of the transmitter and duplexer C. By using a class C final amplifier with high driving power D. By installing a low-pass filter in the antenna feed line

Description : How can intermodulation interference between two transmitters in close proximity reduced or eliminated? A. Through installing a band-pass filter in the antenna feed line B. Through installing terminated circulator ... high driving power D. By installing a low-pass filter in the antenna feed line

Last Answer : A. Through installing a band-pass filter in the antenna feed line

Harmonic suppressor connected to an antenna. A. High pass filter B. Low pass filter C. Tank circuit D. M-derived filter

Description : Harmonic suppressor connected to an antenna. A. High pass filter B. Low pass filter C. Tank circuit D. M-derived filter

Last Answer : B. Low pass filter

Which of the following filters block FM radio band for TV channels (2 to 13)? A. High-pass filter B. Band reject filter C. Low-pass filter D. Band-pass filter

Description : Which of the following filters block FM radio band for TV channels (2 to 13)? A. High-pass filter B. Band reject filter C. Low-pass filter D. Band-pass filter

Last Answer : B. Band reject filter

The ___________ filter attenuates signals but passes frequencies below and above that band. A. low pass B. band pass C. band stop D. high pass

Description : The ___________ filter attenuates signals but passes frequencies below and above that band. A. low pass B. band pass C. band stop D. high pass

Last Answer : C. band stop

What is the purpose of having a low pass filter in PLL?

Description : What is the purpose of having a low pass filter in PLL?

Last Answer : *It removes the high frequency components and noise. *Controls the dynamic characteristics of the PLL such as capture range, lock-in range,band-width and transient response. *The charge on the filter capacitor gives a short- time memory to the PLL

Define low pass filter.

Description : Define low pass filter.

Last Answer : A low pass filter allows only low frequency signals upto a certain break point fH to pass through.

i. (X’+Y’) A. Low-pass filter function ii. (X’Y’) B. Sum iii. (XY) C. NAND D. Carry E.NOR a) i-C, ii-E, iii-D b) i-C, ii-E, iii-B c) i-C, ii-B, iii-D d) i-C, ii-E, iii-A

Description : i. (X’+Y’) A. Low-pass filter function ii. (X’Y’) B. Sum iii. (XY) C. NAND D. Carry E.NOR a) i-C, ii-E, iii-D b) i-C, ii-E, iii-B c) i-C, ii-B, iii-D d) i-C, ii-E, iii-A

Last Answer : Ans: i-C, ii-E, iii-D

How does a low-pass filter detect pdm?

Description : How does a low-pass filter detect pdm?

Last Answer : By averaging the value of the pulses over the period of the pulse-repetition rate.

low pass &band pass filter in detail

Last Answer : A low pass filter is a filter that only allows certain frequencies to be allowed through the filter. The low in low pass refers to it allowing frequencies below a certain cut off ... cutoff frequency to pass through effectively creating a band of frequency values that are allowed through. 

A low-pass filter with a cut-off frequency of 30 Hz is cascaded with a high pass filter with a cut-off frequency

Description : A low-pass filter with a cut-off frequency of 30 Hz is cascaded with a high pass filter with a cut-off frequency of 20 Hz. The resultant system of filters will function as  (A) an all – pass filter (B) an all – stop filter (C) an band stop (band-reject) filter (D) a band – pass filter

Last Answer : A low-pass filter with a cut-off frequency of 30 Hz is cascaded with a high pass filter with a cut-off frequency of 20 Hz. The resultant system of filters will function as  a band – pass filter

Draw and explain: bridge rectifier with shunt capacitor filter.

Description : Draw and explain: bridge rectifier with shunt capacitor filter.

Last Answer : Operation of bridge rectifier with capacitor filter is explained in different intervals with the help of the following wave form. Operation in interval at 0 to A: ... filter is very close to theideal dc voltage waveform as most of the ripple is removed from rectified output.

Draw the circuit diagram of shunt capacitor filter along with full wave rectifier. Draw the waveform of full wave rectifier output and shunt capacitor filter output.

Description : Draw the circuit diagram of shunt capacitor filter along with full wave rectifier. Draw the waveform of full wave rectifier output and shunt capacitor filter output.

Last Answer : Fig: Shunt capacitor filter along with full wave rectifier Fig: Waveform of full wave rectifier output and shunt capacitor filter output.

With help of circuit diagram and waveform, explain shunt capacitor filter.

Description : With help of circuit diagram and waveform, explain shunt capacitor filter.

Last Answer : Circuit diagram and Waveform: OR Explanation: A filter circuit is one which removes the ac component present in the rectified output and allows the dc component to reach the ... which allows ac components. The remaining dc components present in the signal are collected at the output. 

A 4 GHz carrier is amplitude modulated by a low-pass signal of maximum cut off frequency 1 MHz

Description : A 4 GHz carrier is amplitude modulated by a low-pass signal of maximum cut off frequency 1 MHz. lf this signal is to be ideally sampled, the minimum sampling frequency should be nearly

Last Answer : A 4 GHz carrier is amplitude modulated by a low-pass signal of maximum cut off frequency 1 MHz. lf this signal is to be ideally sampled, the minimum sampling frequency should be nearly 4 Ghz

The most efficient method of increasing the speed of a 3.75KW d.c. shunt motor would be ...

Description : The most efficient method of increasing the speed of a 3.75KW d.c. shunt motor would be  A) Armature control B) Flux control C) Ward—Leonard D) Tapped—field control

Last Answer :  Flux control 

The shunt admittance of a transmission line is given by

Last Answer : The shunt admittance of a transmission line is given by Y = G + j ω C

Why shunt capacitor is used?

Description : Why shunt capacitor is used?

Last Answer : To improve voltage at receiving end and power factor

A galvanometer has resistance of 120 Ω. In order to pass 5% of the main current in it, the value of shunt resistance Rs must be equal to a) 6.3 Ω b) 6 Ω c) 2 Ω d) 2.3 Ω

Description : A galvanometer has resistance of 120 Ω. In order to pass 5% of the main current in it, the value of shunt resistance Rs must be equal to a) 6.3 Ω b) 6 Ω c) 2 Ω d) 2.3 Ω

Last Answer : a) 6.3 Ω

um of the elements of row i equal to shunt admittances connected to bus i. If this summation is zero, indicates there is no a) shunt admittance b) mutual coupling c) both 1 and 2 d) none of the above

Description : um of the elements of row i equal to shunt admittances connected to bus i. If this summation is zero, indicates there is no a) shunt admittance b) mutual coupling c) both 1 and 2 d) none of the above

Last Answer : c) both 1 and 2

What is a prototype in Arduino?

Description : What is a prototype in Arduino?

Last Answer : A prototype in Arduino is a preliminary version of a circuit or project that is used for testing and experimentation.

To patent an idea, do you need to make a prototype?

Description : To patent an idea, do you need to make a prototype?

Last Answer : Maybe you should hire the attorney to tell you what you need to get the patent.

What can you do if you have built a working prototype of a great invention idea but have very limited funds?

Description : What can you do if you have built a working prototype of a great invention idea but have very limited funds?

Last Answer : answer:You can't trust anyone until you get it copyrighted. Until then, guard the idea - or whatever you have already built - with your life. What are you interested in doing with it? You can either ... how much it would cost to actually produce and build your ideas) a huge loan to pay off anyway.

How do I get pixel measurements on a layout prototype easily?

Description : How do I get pixel measurements on a layout prototype easily?

Last Answer : answer:I use Scribus for that sort of stuff. It allows me to choose the default units (px, pt, in, etc) for each drawing (in Page ->Manage Page Properties and also in File -> Document Setup) ... that help? Did I understand your need correctly? Sorry, but I know nothing about Fireworks. Good luck! :)

Did Gizmodo break the law buy purchasing a stolen iPhone prototype?

Description : Did Gizmodo break the law buy purchasing a stolen iPhone prototype?

Last Answer : answer:I feel like they are, they had to know that someone doesn't just turn up with a prototype iPhone. Even if the guy who gave it to them was from Apple, they still would be doing something morally ... it to Gizmodo. I'm not sure how much I buy that story, but that is what I have read.

Do you really believe someone "forgot" the iPhone prototype in a bar?

Description : Do you really believe someone "forgot" the iPhone prototype in a bar?

Last Answer : Was there an empty vodka tonic found sitting next to it?

Why is jQuery so much more popular than Prototype and Scriptaculous?

Description : Why is jQuery so much more popular than Prototype and Scriptaculous?

Last Answer : Some reasons off of the top of my head: 1. It is smaller 2. It is faster 3. It is easy to extend (plugins and such) 4. It is true to javascript. Prototype is like a ruby-ized javascript

A computer model of a part design on a CAD system is called which of the following? a.Computer Prototype b.Geometric Prototype c.Solid Prototype d.Virtual Prototype

Description : A computer model of a part design on a CAD system is called which of the following? a.Computer Prototype b.Geometric Prototype c.Solid Prototype d.Virtual Prototype

Last Answer : d.Virtual Prototype

Choose the correct sequence to generate prototype a.3D CAD data - CAD solid model - STL file - RP prototype b.CAD solid model - 3D CAD data - RP prototype - STL file c.STL file - 3D CAD data - CAD solid model - RP prototype d.3D CAD data - STL file - CAD solid model - RP prototype

Description : Choose the correct sequence to generate prototype a.3D CAD data - CAD solid model - STL file - RP prototype b.CAD solid model - 3D CAD data - RP prototype - STL file c.STL file - 3D CAD data - CAD solid model - RP prototype d.3D CAD data - STL file - CAD solid model - RP prototype

Last Answer : a.3D CAD data - CAD solid model - STL file - RP prototype

What year was the first prototype for a home-based video game console developed? -Gaming

Description : What year was the first prototype for a home-based video game console developed? -Gaming

Last Answer : In 1967, developers at Sanders Associates, Inc., led by Ralph Baer, invented a prototype multiplayer, multi-program video game system that could be played on a television. It was known as “The Brown Box.”

What is prototype of an advertisement? Explain CLT and Quota Sampling process of testing prototypes . -Technology

Description : What is prototype of an advertisement? Explain CLT and Quota Sampling process of testing prototypes . -Technology

Last Answer : Prototype of an advertisement is a sample of an ad which is used to test the effectiveness of an advertising campaign before the launch of the product in market.CLT - Central Location Test ... each segment based on a specified proportion.Quota sampling is of two types -qualitative and quantitative.

What Process adaptions are required if the prototype will evolve into deliverable system or product?

Description : What Process adaptions are required if the prototype will evolve into deliverable system or product?

Last Answer : What process adaptations are required if the prototype will evolve into a deliverable system or product?

Prototype Translation

Description : Where can I download the atprototype translation and what is the installation process?

Last Answer : It's also a game that started to be translated with great momentum, but then somehow stopped. After all this time, it's unlikely that it will be anything. It was also written somewhere that the game's file system made the game quite complicated to compile. Maybe this was the end of the project.   

Prototype 2 translations exist?

Description : Completed prototype 2? Did anyone do it? I can't really find anything in the search engine about this unfortunately. :( [img alt_text = 'prototype 2 english' description = ''] https:///wp-content/uploads/2017/01/prototype-2-magyaritas.jpg [/ img]

Last Answer : Sorry, no translation available. It's an old game, so it's not to be expected unfortunately.

A glass dome covering an area of 3-5 acres with 4000 representatives of most ecosystems and eight human beings in order to prepare a prototype of spac

Description : A glass dome covering an area of 3-5 acres with 4000 representatives of most ecosystems and eight human beings in order to prepare a prototype of spac

Last Answer : A glass dome covering an area of 3-5 acres with 4000 representatives of most ecosystems and eight human ... B. phytotron C. Biosphere 1 D. Biosphere 2

Which property of the rapid prototype is not important? a) The speed with which it can be developed b) The speed with which it can be modified c) Its ability to determine the client’s real needs d) The insights that the design team can gain from it, even if they are of the ‘how not to do it’ variety e) Its internal structure.

Description : Which property of the rapid prototype is not important? a) The speed with which it can be developed b) The speed with which it can be modified c) Its ability to determine the client's real needs d) The ... from it, even if they are of the how not to do it' variety e) Its internal structure.

Last Answer : c) Its ability to determine the client’s real needs

What is a model of a proposed product, service, or system? a. Prototyping b. Prototype c Selling prototype d. None of the above

Description : What is a model of a proposed product, service, or system? a. Prototyping b. Prototype c Selling prototype d. None of the above

Last Answer : d. None of the above

A 300 mm square bearing plate settles by 15 mm in a plate load test on a cohesive soil when the intensity of loading is 0.2 N/mm². The settlement of a prototype shallow footing 1 m square under the same intensity of loading is (A) 15 mm (B) 30 mm (C) 50 mm (D) 167 mm

Description : A 300 mm square bearing plate settles by 15 mm in a plate load test on a cohesive soil when the intensity of loading is 0.2 N/mm². The settlement of a prototype shallow footing 1 m square under the same intensity of loading is (A) 15 mm (B) 30 mm (C) 50 mm (D) 167 mm

Last Answer : (C) 50 mm

A 600 mm square bearing plate settles by 15 mm in plate load test on a cohesion-less soil under an intensity of loading of 0.2 N/ram². The settlement of a prototype shallow footing 1 m square under the same intensity of loading is (A) 15 mm (B) Between 15 mm and 25 mm (C) 25 mm (D) Greater than 25 mm

Description : A 600 mm square bearing plate settles by 15 mm in plate load test on a cohesion-less soil under an intensity of loading of 0.2 N/ram². The settlement of a prototype shallow footing 1 m square under the same intensity of ... (A) 15 mm (B) Between 15 mm and 25 mm (C) 25 mm (D) Greater than 25 mm

Last Answer : Answer: Option B

For similarity, in addition to models being geometrically similar to prototype, the following in both cases should also be equal (A) Ratio of inertial force to force due to viscosity (B) Ratio of inertial force to force due to gravitation (C) Ratio of inertial force to force due to surface tension (D) All the four ratios of inertial force to force due to viscosity, gravitation, surface tension, and elasticity

Description : For similarity, in addition to models being geometrically similar to prototype, the following in both cases should also be equal (A) Ratio of inertial force to force due to viscosity (B) ... the four ratios of inertial force to force due to viscosity, gravitation, surface tension, and elasticity

Last Answer : Answer: Option D

Which was the first working prototype of internet?

Description : Which was the first working prototype of internet?

Last Answer : ARPANET