How Will You Test A Transistor With A Multimeter?

1 Answer

Answer :

1. Emitter +ve of meter and base -ve output =Low resistance
2. Emitter -ve of meter and base +ve output =High resistance
3. Collector +ve and base -ve output =Low
4. Collector -ve and base +ve output =Low
Emitter: Collector = High resistance
PNP: Opposite Results

Related questions

Description : What Is Solenoid Valve? Where It Is Used?

Last Answer : A solenoid is electrically operated valve. It consists of solenoid coil in which magnetic plunger moves. This plunger is connected to the plug and tends to open or close the valve. There are two ... . Normally Open 2. Normally closed Use: It is used for safety purpose in different electric work.

Description : Explain Ratio Control System?

Last Answer : A ratio control system is characterized by the fact that variations in the secondary variable don't reflect back on the primary variable. A ratio control system is the system where secondary flow is hold in some proportion ... : KA-B=0 or B/A = K where K' is the ratio setting off the relay.

Description : What Is Motion Balance Principle?

Last Answer : A controller which generates an output signal by motion of its parts. The increase in the baffle is to move towards the nozzle. The nozzle back pressure will increase. This increase in the back ... moved upward due to this. The nozzle will move until motion almost equals the input baffle motion.

Description : What Is Force Balance Principle? State Some Of Its’ Advantages?

Last Answer : Force balance principle: A controller which generates an output signal by opposing torque. The input force is applied on the input bellows which moves the beam. This crackles nozzle back pressure. The ... 1. Moving parts are fewer. 2. Baffle movement is negligible 3. Frictional losses are less

Description : What Is Zener Diode? What Is Voltage Regulator?

Last Answer : The breakdown region of a p-n diode can be made very sharp and almost vertical diodes with almost vertical breakdown region are known a s zener diodes. A zener diode operating in the ... . Voltage regulator: The output remains constant despite changes in the input voltage due to zener effect.

Description : Hat Is Zener Diode? What Is Voltage Regulator?

Last Answer : The breakdown region of a p-n diode can be made very sharp and almost vertical diodes with almost vertical breakdown region are known a s zener diodes. A zener diode operating in the breakdown ... . It is this constant voltage that has made the zener diode an important device in voltage regulation.

Description : What Is Intrinsically Safe System?

Last Answer : Intrinsic safety is a technique for designing electrical equipment for safe use in locations made hazardous by the presence of flammable gas or vapours in the air. Intrinsically safe circuit is one ... causing ignition of a specified gas or vapour in air mixture at the most ignited concentration.

Description : What Is Furnace Draft Control?

Last Answer : Balanced draft boilers are generally used negative furnace pressure. When both forced draft and induced draft are used together, at some point in the system the pressure will be same as that of ... desirable condition is that the one have a very slight negative pressure of the top of furnace.

Description : What Are Different Types Of Control Valves?

Last Answer : The commonly used control valves can be defined as follows: a. Depending on Action: Depending on action there are two types of control valves 1. Air to open 2. Air to close b. Depending on body ... valves 1. Globe valves single or double seated 2. Angle valves 3. Butterfly valves 4. Three way valves

Description : Name Different Types Of Bourdon Tubes?

Last Answer : Types of bourdon tubes: 1. C type 2. Spiral 3. Helix

Description : What Are Primary Elements Of Measuring Pressure? Which Type Of Pressure Can Be Measured By These Elements?

Last Answer : Primary elements of measuring pressure are: 1. Bourdon Tube 2. Diaphragm 3. Capsule 4. Bellows 5. Pressure springs These elements are known as elastic deformation pressure elements.

Description : What Is The Use Of Valve Positioner?

Last Answer : Valve positioner can be used for following reasons: 1. Quick action 2. Valve hysteresis 3. Viscous liquids 4. Split range. 5. Line pressure changes on valve 6. Bench set not standard 7. Reverse valve operations

Description : What Is The Use Of Double Seated Valve?

Last Answer : In double seated valves the upward and downward forces on the plug due to reduction of fluid pressure are nearly equalized. It is generally used on bigger size valves and high pressure systems. Actuator forces required are less.

Description : What Is The Use Of Single Seated Valve?

Last Answer : The single seated valve is used on smaller sizes where an absolute shut off is required. The use of single seated valve is limited by pressure drop across the valve in the closed or almost closed position.

Description : How Would You Choose Differential Range?

Last Answer : The most common range for differential range for liquid measurement is 0-100. This range is high enough to minimize the errors caused by unequal heads in the seal chambers. It is also dependent on the ... to 400. While decrease down up to 20 by merely changing the range tubes or range adjustments.

Description : Explain The Mechanism Behind The Turbine Meter?

Last Answer : Turbine meters consist of straight flow tube within which a turbine or fan is free to rotate about it s axis which is fixed along g the centre line of the tube. Mostly, a magnetic pick up ... in the form of electric pulses from the magnetic pick up with a frequency proportional to the flow rate.

Description : What Is The Working Principle Of The Magnetic Meter?

Last Answer : An electric potential is developed when a conductor is moved across the magnetic field. In most electrical machinery the conductor is a wire. The principle is equally applicable to a moving ... conducting liquids. The magnetic meter is particularly suited to measurement of slurries and dirty fluids.

Description : Explain The Working Of Rotameter?

Last Answer : Variable area meters are special form of head meters. Where in the area of flow restrictor is varied. So as to hold the differential pressure constant. The rota meter consists of a vertical tapered tube ... is maintained constant. The position of the float' is the measure of the rate of flow.

Description : What Are De-saturators?

Last Answer : When, in some processes, e.g. batch processes, long transient responses are expected during which a sustained deviation is present the controller integral action continuously drives the output to a minimum or ... of the control unit'. When this condition is met, then this unit is de-saturated.

Description : How Is Automatic Reference Junction Compensation Carried Out In Temperature Recorders?

Last Answer : In automatic reference junction compensation, variable nickel resistor is used. As the temperature changes, so does its resistance. This reference junction compensator is located, so that it will be ... the thermocouple is rejoined. This joint is invariably at the terminal strip of the instrument.

Description : Why Thermowells Are Used? What Materials Are Used In Thermo Wells?

Last Answer : In numerous applications, it is neither desirable nor practical to expose a temperature sensor directly to a material. Wells are therefore used to protect against damage corrosion, arosion, ... operations. Materials used in thermowells: Stainless steel, Inconel, Monel, Alloy Steel, Hastelloy

Description : Explain The Burnout Feature?

Last Answer : Burnout provides the warnsug feature of driving indicator at the end of scale, if the input circuit is open. A burnout resistor is provided which develops a voltage drop between the measuring circuit and ... circuit in the input. Upscale burnout: R value 10 M Downscale burnout: R value 22 M

Description : What Is The Constant Voltage Unit?

Last Answer : The constant voltage circuit consists of a rectifier, CR and a filter capacitor. It is followed by two stages of zener regulation. Abridge configuration is provided to lamp line voltage ... provides relatively provide constant current. Resistors form a bridge that may remoment line voltage effects.

Description : Explain The Working Of An Enraf Level Gauge?

Last Answer : Enraf level gauge is based on the ser powered null balance technique. A displacer serves as continuous level sensing element. A two phase ser motor controlled by a capacitive balance system winds unwinds ... by the moving central sensing rod provided by the two capacitor plates and the si plates.

Description : Explain The Working Of An Electronic Level Troll?

Last Answer : The variation in level of buoyancy resulting from a change in liquid level varies the net weight of the displacer increasing or decreasing the load on the torque arm. This change is directly ... change proportional to the rotor displacement, which is converted and amplified to a D.C. current.

Description : How D.p. Transmitter Can Be Applied To Open Tank?

Last Answer : In open tank the lower pressure side is vented to the atmosphere. All pressure is applied to the high pressure side. This vessel pressure is measured through high pressure side.

Description : How D.p. Transmitter Can Be Applied To Close Tank?

Last Answer : In closed tank, bottom of the tank is connected to the high pressure side of the transmitter. Top of tank is connected to the lower pressure side of the transmitter. In this way vessel pressure can be measured.

Description : Name Different Parts Of A Pressure Gauge. Explain The Use Of Hair Spring In The Pressure Gauge?

Last Answer : Pressure gauge includes following components: 1. ‘C’ type bourdon tube. 2. Connecting link 3. Sector gear 4. Pinion Gear 5. Hair spring 6. Pointer 7. Dial Use of hair spring: Hair spring is responsible for controlling torque. It is also used to eliminate any play into linkages..

Description : How Is Flow Measured In Square Root?

Last Answer : Flow varies directly as the square root of pressure. Thus, F=K of square root of applied pressure. Since this flow varies as the square root of differential pressure. The pressure pen does not directly ... reads 50% of the chart. So, flow can be calculated using the pen measure in the chart.

Description : How Can A D.p. Transmitter Be Calibrated?

Last Answer : D.P. transmitter can be calibrated using following steps: 1. Adjust zero of Transmitter. 2. Perform static pressure test: Give equal pressure on both sides of transmitter. Zero should not ... Apply required pressure to the high pressure side and adjust the span. Adjust zero gain if necessary.

Description : Explain Bernoulli’s Theorem. State Its Application?

Last Answer : Bernoulli's theorem states that the total energy of a liquid flowing from one point to another remains constant'. It is applicable for non-compressible liquids. For different types of liquid flow ... indicator. It can also be used to low pressure in the venturi tubes present in carburetor.

Description : Why Is The Orifice Tab Provided?

Last Answer : Following reasons justify for providing orifice tab: 1. Indication of orifice plate in a line 2. The orifice diameter is marked on it. 3. The material of the orifice plate. 4. The tag number of the orifice plate. 5. To mark the inlet of an orifice.

Description : How Do You Identify An Orifice In The Pipeline?

Last Answer : An orifice tab is welded on the orifice plate which extends out of the line giving an indication of the orifice plate.

Description : What Are Different Types Of Orifice Plates? State Their Uses?

Last Answer : Different orifice plates are: 1. Concentric 2. Segmental 3. Eccentric Concentric: These plates are used for ideal liquid as well as gases and steam service. Concentric holes are present in these ... This plate has the eccentric holes. This plate is used in viscous and sherry flow measurement.

Description : How To Test A Transistor With A Multimeter?

Last Answer : 1. Emitter +ve of meter and base -ve output =Low resistance 2. Emitter -ve of meter and base +ve output =High resistance 3. Collector +ve and base -ve output =Low 4. Collector -ve and base +ve output =Low Emitter: Collector = High resistance PNP: Opposite Results

Description : How will you test a transistor with a multimeter. ?

Last Answer : 1. Emitter +ve of meter and Base -ve output = Low resistance 2. Emitter -ve of meter and base +ve output = High resistance. 3. Collector +ve and Base -ve output = Low. 4. Collector -ve and base +ve output = High. Emitter : Collector = High Resistance. PNP : Opposite Results. 

Description : When using a multimeter for resistance measurements, it should be calibrated by clipping the loose ends of the leads together and _____________. A. setting the instrument pointer at 'zero' ohms B. ... the plus and minus terminals D. using a special purpose resistance measuring instrument (a bridge)

Last Answer : Answer: A

Description : How can I use a multimeter to find out how many OHMS are in a cable?

Last Answer : Measure the potential difference (V) across the cable and the current (I) running through it. Then use Ohm’s law: V = IR. R is the resistance, given in ohms, where 1 ohm is 1 volt divided by 1 amp.

Description : What is a multimeter ?

Last Answer : Also known as Multimeter or Multitester , Avometer ( AVO {Ampere-Volt-Ohm} meter) . It is an electronic measuring instrument , where various measurement functions are combined in one unit. A simple ... টাকার 600 , and laboratory-grade models with certified grading can cost up to ইউ 5,000.

Description : What inspection checks should be made to a multimeter before use?

Last Answer : If it has battery cells, ensure you have the good battery cells.The probes should be intact. The knobs should be in order. Thedevice should not have any cracks or broken parts.

Description : What should be the outputs of the hot neutral and ground wires respectively when tested with a multimeter?

Last Answer : Feel Free to Answer

Description : A multimeter is used to measure – (1) current (2) voltage (3) resistance (4) All of the above

Last Answer : (4) All of the above Explanation: A multimeter or a multitester, also known as a VOM (Volt-Ohm meter), is an electronic measuring instrument that combines several measurement functions in ... or digital circuits-analog multimeters (AMM) and digital multimeters (often abbreviated DMM or DVOM.)

Description : If your multimeter gives a reading in ohms when testing each end of each conductor of a three-conductor cable, this indicates ______________. A. continuity of the conductor B. an infinite resistance C. the presence of a partial ground D. that the conductor is not short circuited

Last Answer : Answer: A

Description : When reading AC current with the multimeter shown in the illustration and you are unsure of the range, the range switch should be set to ___________. EL-0047 A. 10 MA/ 10 AMP with leads in the (-10 A ... leads in the (-COMMON) and (+10 A) jacks D. unable to measure AC current with this multimeter

Last Answer : Answer: D

Description : What is the resistance value indicated on the multimeter scale illustrated, if the range switch is set at R X 100, and the needle is at the position indicated by the letter 'R'? EL-0047 A. 6.0 ohms B. 162.5 ohms C. 600 ohms D. 16,250 ohms

Last Answer : Answer: C

Description : What is the resistance value indicated by the multimeter scale illustrated, if the range switch is set at R X 100, and the needle is at the position indicated by the letter 'Y'? EL-0047 A. 220 ohms B. 240 ohms C. 2,400 ohms D. 24,000 ohms

Last Answer : Answer: C

Description : What is the resistance value indicated by the multimeter scale illustrated, if the range switch is set at R X 1, and the needle is at the position indicated by the letter 'A'? EL-0047 A. 10 ohms B. 100 ohms C. 200 ohms D. 1,000 ohms

Last Answer : Answer: C

Description : A multimeter can be used to directly measure _____________. A. watts B. field flux C. current D. all of the above

Last Answer : Answer: C

Description : D.C. propulsion motor brush pressure depends on the brush grade used and in practice is set with a ______________. A. multimeter B. manometer C. spring scale D. compound gauge

Last Answer : Answer: C

Description : Before using an all-purpose electric measuring instrument (multimeter) utilizing internal batteries to supply power for resistance measurements, you should FIRST ____________. A. remove one of the ... batteries C. calibrate using a known external resistance D. select the proper resistance range

Last Answer : Answer: D