What Is Bernoulli's Theorem. State Its Application?

1 Answer

Answer :

Bernoulli's theorem states that the ‘total energy of a liquid flowing from one point to another remains constant'. It is applicable for non-compressible liquids. For different types of liquid flow Bernoulli's equation changes. There is direct proportion between speed of fluid and its dynamic pressure and its kinetic energy. It can be used in various real life situations like measuring pressure on aircraft wing and calibrating the airspeed indicator. It can also be used to low pressure in the venturi tubes present in carburetor.

Related questions

Description : Explain Bernoulli’s Theorem. State Its Application?

Last Answer : Bernoulli's theorem states that the total energy of a liquid flowing from one point to another remains constant'. It is applicable for non-compressible liquids. For different types of liquid flow ... indicator. It can also be used to low pressure in the venturi tubes present in carburetor.

Description : State Bernoulli’s theorem. State any two application of it.

Last Answer : It states that in a steady, ideal flow of an incompressible fluid, the total energy at any point of the fluid is always constant.  Total energy = Constant Pressure energy + ... . Practical application of Bernoulli's in following devices: i) Venturimeter ii) Orifice meter iii) Pitot tube

Description : What Is Force Balance Principle? State Some Of Its' Advantages?

Last Answer : Force balance principle: A controller which generates an output signal by opposing torque. The input force is applied on the input bellows which moves the beam. This crackles nozzle back pressure. The ... a. Moving parts are fewer. b. Baffle movement is negligible c. Frictional losses are less

Description : Explain What Are Different Types Of Orifice Plates? State Their Uses?

Last Answer : Different orifice plates are: 1. Concentric 2. Segmental 3. Eccentric Concentric: These plates are used for ideal liquid as well as gases and steam service. Concentric holes are present in these ... This plate has the eccentric holes. This plate is used in viscous and sherry flow measurement.

Description : The hydraulic brake used in automobiles is a direct application of - (1) Archimedes principle (2) Torricellean law (3) Bernoulli's Theorem (4) Pascal's law

Last Answer : (4) Pascal's law Explanation: Pascal's law basically states that any pressure applied to a fluid inside a closed system will transmit that pressure equally in all directions throughout the fluid.

Description : The hydraulic brakes used in automobiles is a direct application of : (1) Archimedes' principle (2) Toricellian law (3) Bernoulli's theorem (4) Pascal's law

Last Answer : (4) Pascal's law Explanation: Pascal's principle guarantees that the pressure is transmitted equally to all parts of the enclosed fluid system. This gives straightline braking unless there is a fluid leak or ... to the actual brake mechanism, which is usually at or near the wheel of the vehicle.

Description : Which of the following instruments is used to measure flow on the application of Bernoulli's theorem? (A) Venturimeter (B) Orifice plate (C) Nozzle (D) All of the above

Last Answer : Answer: Option D

Description : The hydraulic brakes used in automobiles is a direct application of : (1) Archimedes’ principle (2) Toricellian law (3) Bernoulli’s theorem (4) Pascal’s law

Last Answer : Pascal’s law

Description : What Is Remote Mount With Mta Option? (in Case Of Dual Sensor Vortex Flowmeter, Rosemount Has Written In Its Catalog Drawings)?

Last Answer : Remote mount with MTA means MTA connector for mounting remote connection. MTA is the Connector used for connection. Generally we called it MTA Connector. There are many types of MTA connector such as MTA 100connectors, Mta 156 connectors etc.

Description : How To Write The Program For Single Push Button By Using Ladder Diagram?

Last Answer : 1. Create a Push button 2. Connect a Counter series to PB 3. Create a compare button 4. Initialize 1 at one end 5. Counter output in another 6. Connect the Coil which has to be energized 7. Initialize 2 at one end 8. Counter output in another 9. Connect the Coil which has to be reenergized.

Description : Why 4-20 Ma Signal Is Preferred Over A 0-10v Signal?

Last Answer : Generally in a transistor some amount of voltage is required for turning it on. This voltage is the cut in voltage. Up to this voltage the exists a nonlinearity in its characteristics. Beyond this cut in voltage ... region lays between 0-4ma, beyond 4ma it linear. This is why 4-20 ma range is used.

Description : Can We Use A Control Valve Without Positioner?

Last Answer : Control valve can not be without positioner. The purpose of the positioner is to control the control valve stroke so as to keep the valve in desired position. The positioner receives signal from ... the desired position the positioner cuts the boosted signal to the actuator and keeps the position.

Description : What Is Instrumentation Measurement?

Last Answer : Instrumentation can be used to measure certain field parameters (physical values): These measured values include: * pressure, either differential or static * flow * temperature - ... frequency * resistivity * conductivity * chemical composition * chemical properties * various physical properties

Description : What Is Instrumentation Control?

Last Answer : In addition to measuring field parameters, instrumentation is also responsible for providing the ability to modify some field parameters. Some examples include: Device Field Parameter(s) Valve Flow, Pressure Relay Voltage, Current Solenoid Physical Location, Level Circuit breaker Voltage, Current.

Description : What Is Instrumentation Instrumentation Engineering?

Last Answer : Instrumentation engineering is the engineering specialization focused on the principle and operation of measuring instruments which are used in design and configuration of automated systems in electrical ... the goal of improving system productivity, reliability, safety, optimization and stability.

Description : Why We Giving Input To Electronic Amplifier In Inverting Pin? What Is The Reason Behind That?

Last Answer : if we need a phase shift than we give input n inverting pin or when we need to boost signal at higher level, i.e; using cascade stages of amplification(even) than we also use inverting pin.

Description : What Is The Function Of 3-way Manifold Valve?

Last Answer : excessive pressure to your differential pressure transmitter, you could damage your instrument. This is known as over-ranging the transmitter. A three-way manifold valve is a device that prevents ... option which could be used generaly for maintenance or re-calibration or fitting new equipment).

Description : Do You Know How D.p. Transmitter Can Be Applied To Close Tank?

Last Answer : In closed tank, bottom of the tank is connected to the high pressure side of the transmitter. Top of tank is connected to the lower pressure side of the transmitter. In this way vessel pressure can be measured.

Description : Explain How D.p. Transmitter Can Be Applied To Open Tank?

Last Answer : In open tank the lower pressure side is vented to the atmosphere. All pressure is applied to the high pressure side. This vessel pressure is measured through high pressure side.

Description : Do You Know The Working Of An Electronic Level Troll?

Last Answer : The variation in level of buoyancy resulting from a change in liquid level varies the net weight of the displacer increasing or decreasing the load on the torque arm. This change is directly ... change proportional to the rotor displacement, which is converted and amplified to a D.C. current.

Description : Tell Me The Working Of An Enraf Level Gauge?

Last Answer : Enraf level gauge is based on the ser powered null balance technique. A displacer serves as continuous level sensing element. A two phase ser motor controlled by a capacitive balance system winds unwinds ... by the moving central sensing rod provided by the two capacitor plates and the si plates.

Description : What Is Constant Voltage Unit?

Last Answer : The constant voltage circuit consists of a rectifier, CR and a filter capacitor. It is followed by two stages of zener regulation. Abridge configuration is provided to lamp line voltage ... provides relatively provide constant current. Resistors form a bridge that may remoment line voltage effects.

Description : Can You Explain The Burnout Feature?

Last Answer : Burnout provides the warnsug feature of driving indicator at the end of scale, if the input circuit is open. A burnout resistor is provided which develops a voltage drop between the measuring circuit and ... circuit in the input. Upscale burnout: R value 10 M Downscale burnout: R value 22 M

Description : Why Thermo Wells Are Used? What Materials Are Used In Thermo Wells?

Last Answer : In numerous applications, it is neither desirable nor practical to expose a temperature sensor directly to a material. Wells are therefore used to protect against damage corresion, arosion, aborsion ... . Materials used in thermo wells: Stainless steel, Inconel, Monel, Alloy Steel, Hastelloy

Description : Do You Know How Do You Identify An Orifice In The Pipeline?

Last Answer : An orifice tab is welded on the orifice plate which extends out of the line giving an indication of the orifice plate.

Description : Explain Why Is The Orifice Tab Provided?

Last Answer : Following reasons justify for providing orifice tab: 1. Indication of orifice plate in a line 2. The orifice diameter is marked on it. 3. The material of the orifice plate. 4. The tag number of the orifice plate. 5. To mark the inlet of an orifice.

Description : Explain How Can A D.p. Transmitter Be Calibrated?

Last Answer : D.P. transmitter can be calibrated using following steps: 1. Adjust zero of Xmtrs. 2. Perform static pressure test: Give equal pressure on both sides of transmitter. Zero should not shift either ... Apply required pressure to the high pressure side and adjust the span. Adjust zero gain if necessary.

Description : Tell Me How Is Flow Measured In Square Root?

Last Answer : Flow varies directly as the square root of pressure. Thus, F=K of square root of applied pressure. Since this flow varies as the square root of differential pressure. The pressure pen does not directly ... reads 50% of the chart. So, flow can be calculated using the pen measure in the chart.

Description : Name Different Parts Of A Pressure Gauge? Explain The Use Of Hair Spring In The Pressure Gauge?

Last Answer : Pressure gauge includes following components: a. ‘C' type bourdon tube. b. Connecting link c. Sector gear d. Pinion Gear e. Hair spring f. Pointer g. Dial Use of hair spring: Hair spring is responsible for controlling torque. It is also used to eliminate any play into linkages.

Description : What Is The Use Of Single Seated Valve?

Last Answer : The single seated valve is used on smaller sizes where an absolute shut off is required. The use of single seated valve is limited by pressure drop across the valve in the closed or almost closed position.

Description : What Is The Use Of Double Seated Valve?

Last Answer : In double seated valves the upward and downward forces on the plug due to reduction of fluid pressure are nearly equalized. It is generally used on bigger size valves and high pressure systems. Actuator forces required are less.

Description : What Is The Use Of Valve Positioner?

Last Answer : Valve positioner can be used for following reasons: a. Quick action b. Valve hysterisis c. Viscous liquids d. Split range. e. Line pressure changes on valve f. Bench set not standard g. Reverse valve operations

Description : What Are Primary Elements Of Measuring Pressure? Which Type Of Pressure Can Be Measured By These Elements?

Last Answer : Primary elements of measuring pressure are: a. Bourdon Tube b. Diaphragm c. Capsule d. Bellows e. Pressure springs These elements are known as elastic deformation pressure elements.

Description : Name Different Types Of Bourdon Tubes?

Last Answer : Types of bourdon tubes: 1. C type 2. Spiral 3. Helix

Description : What Are Different Types Of Control Valves?

Last Answer : The commonly used control valves can be defined as follows: a. Depending on Action: Depending on action there are two types of control valves 1. Air to close 2. Air to close b. Depending on body ... 1. Globe valves single or double seated 2. Angle valves 3. Butterfly valves 4. Three way valves

Description : What Is Furnace Draft Control?

Last Answer : Balanced draft boilers are generally used negative furnace pressure. When both forced draft and induced draft are used together, at some point in the system the pressure will be same as that of ... desirable condition is that the one have a very slight negative pressure of the top of furnace.

Description : What Is Intrinsically Safe System?

Last Answer : Intrinsic safety is a technique for designing electrical equipment for safe use in locations made hazardous by the presence of flammable gas or vapours in the air. Intrinsically safe circuit is one ... causing ignition of a specified gas or vapour in air mixture at the most ignited concentration.

Description : What Is Zener Diode? What Is Voltage Regulator?

Last Answer : The breakdown region of a p-n diode can be made very sharp and almost vertical diodes with almost vertical breakdown region are known a s zener diodes. A zener diode operating in the ... . Voltage regulator: The output remains constant despite changes in the input voltage due to zener effect.

Description : What Is Motion Balance Principle?

Last Answer : A controller which generates an output signal by motion of its parts. The increase in the baffle is to move towards the nozzle. The nozzle back pressure will increase. This increase in the back ... moved upward due to this. The nozzle will move until motion almost equals the input baffle motion.

Description : How To Test A Transistor With A Multimeter?

Last Answer : 1. Emitter +ve of meter and base -ve output =Low resistance 2. Emitter -ve of meter and base +ve output =High resistance 3. Collector +ve and base -ve output =Low 4. Collector -ve and base +ve output =Low Emitter: Collector = High resistance PNP: Opposite Results

Description : What Is Ratio Control System?

Last Answer : A ratio control system is characterized by the fact that variations in the secondary variable don't reflect back on the primary variable. A ratio control system is the system where secondary flow is hold in some proportion ... : KA-B=0 or B/A = K where K' is the ratio setting off the relay.

Description : What Is Solenoid Valve? Where It Is Used?

Last Answer : A solenoid is electrically operated valve. It consists of solenoid coil in which magnetic plunger moves. This plunger is connected to the plug and tends to open or close the valve. There are two ... 1. Normally Open 2. Normally closed Use: It is used for safety purpose in different electric work

Description : Do You Know How Is Automatic Reference Junction Compensation Carried Out In Temperature Recorders?

Last Answer : In automatic reference junction compensation, variable nickel resistor is used. As the temperature changes, so does its resistance. This reference junction compensator is located, so that it will be ... the thermocouple is rejoined. This joint is invariably at the terminal strip of the instrument.

Description : Explain What Are De-saturators?

Last Answer : When, in some processes, e.g. batch processes, long transient responses are expected during which a sustained deviation is present the controller integral action continuously drives the output to a minimum or ... of the control unit'. When this condition is met, then this unit is de-saturated.

Description : What Is The Working Of Rota Meter?

Last Answer : Variable area meters are special form of head meters. Where in the area of flow restrictor is varied. So as to hold the differential pressure constant. The rota meter consists of a vertical tapered tube ... is maintained constant. The position of the float' is the measure of the rate of flow.

Description : How To Choose Differential Range?

Last Answer : The most common range for differential range for liquid measurement is 0-100. This range is high enough to minimize the errors caused by unequal heads in the seal chambers. It is also dependent on the ... to 400. While decrease down up to 20 by merely changing the range tubes or range adjustments.

Description : Tell Me The Mechanism Behind The Turbine Meter?

Last Answer : Turbine meters consist of straight flow tube within which a turbine or fan is free to rotate about it s axis which is fixed along g the centre line of the tube. Mostly, a magnetic pick up ... in the form of electric pulses from the magnetic pick up with a frequency proportional to the flow rate.

Description : Explain What Is The Working Principle Of The Magnetic Meter?

Last Answer : An electric potential is developed when a conductor is moved across the magnetic field. In most electrical machinery the conductor is a wire. The principle is equally applicable to a moving ... conducting liquids. The magnetic meter is particularly suited to measurement of slurries and dirty fluids.

Description : How Can We Calibrate A Positioner?

Last Answer : A positioner is a device put into a valve to ensure that it is at a correct position of opening as per the control signal. An I/P converter only sends the opening/closing request to valve ... is used in a valve when valve operating signal range is different from I/P converter output range.

Description : What Is The Difference Between Dry Leg And Wet Leg?

Last Answer : Dry leg means in lab. And wet leg means in feild