Binding material used in cemented carbide tools is : (A) Nickel (B) Cobalt (C) Chromium (D) Silicon

1 Answer

Answer :

Binding material used in cemented carbide tools is : Cobalt 

Related questions

Description : Cemented carbide tools are not suitable for cutting (A) Aluminium (B) Brass (C) Cast iron (D) Steel

Last Answer : (A) Aluminium

Description : Stellite is a __________ material. (A) Ferrous (B) Ceramic (C) Cemented carbide (D) Non-ferrous cast alloy cutting tool

Last Answer : (D) Non-ferrous cast alloy cutting tool

Description : Carbide tipped cutting tools are manufactured by powder metallurgy techniques and have a composition of (A) 90% tungsten carbide and 10% cobalt (B) 70% aluminium oxide & 30% silica (C) 30% nickel, 15% chromium & 55% tungsten (D) 65% tungsten & 35% zirconium

Last Answer : Option A

Description : Which of the following is the most wear resistant grade of carbide used for the cutting tools? (A) Aluminium carbide (B) Tungsten carbide (C) Nickel carbide (D) Iron carbid

Last Answer : Option B

Description : Which of the following is the most wear resistant grade of carbide used for the cutting tools? (A) Aluminium carbide (B) Tungsten carbide (C) Nickel carbide (D) Iron carbide

Last Answer : Option B

Description : Powder metallurgy technique is used in the production of __________ tools. (A) Tungsten carbide (B) High carbon steel (C) High speed steel (D) Drilling

Last Answer : Option A

Description : Broaching tools are usually made of (A) Cermets (B) High speed steel (C) Tungsten carbide (D) Stellite

Last Answer : Option B

Description : Material having highest cutting speed is : (A) Cast iron (B) Bronze (C) Aluminium (D) High carbon steel

Last Answer : Material having highest cutting speed is : Aluminium

Description : Silicon carbide is a/an (A) Adhesive (B) Abrasive (C) Type of glass (D) Brittle material

Last Answer : (B) Abrasive

Description : _________ is the hardest material out of the following. (A) Boron carbide (B) Tungsten carbide (C) Hardened steel (D) Silicon carbide

Last Answer : (A) Boron carbide

Description : Highest cutting speed is achieved by the __________ tool material. (A) High speed steel (B) Carbide (C) Cast alloy (D) Plain carbon steel

Last Answer : (B) Carbide

Description : Explain manufacturing of Acetylene using Calcium carbide as a raw material. 

Last Answer : Acetylene from CaC2 Raw materials: lime stone, coke, water Chemical reactions: CaO + 3C CaC2 + CO CaC2 + H2O Ca(OH)2 + CH≡CH Process Description: Calcium carbide is produced ... decomposes violently at 650˚C . Hence temperature is maintained below 150˚C and 30 cm of water pressure.

Description : Write one application for the give dielectric material. (i) Polyvinyl Carbide(PVC) (ii) Glass (iii) Mica (iv) Cotton and Silk

Last Answer : (i) Polyvinyl Carbide(PVC):it is used in insulation of wires and cables in domestic wiring as well as in aircraft and factory wiring (any one)  (ii) Glass: 1) Alkaline glasses are used for ... with wax or varnishes are used in windings of magnet coils and small medium sized mechanics (any one) 

Description : Have you had a dental crown re-cemented after it fell off ?

Last Answer : No, not a permanent one. Usually there is damage/rot under the crown and that is why it fell off. More work to the tooth is required before another crown is put on.

Description : i have a cemented backyard. can i pour some black soil on it and plant green grass?

Last Answer : Paint the cement green and put out fancy pots of flowers and other decorations. My parents moved into a house with a cement front yard and loved it. They never wanted grass to mow, water, fertilize, mow, water, fertilize, etc.

Description : The bond of alliance between the Congress and the Muslim League was cemented by the conclusion of the Lucknow Pact in 1916. -SST 10th

Last Answer : Independent Unit: India was to be treated as an independent unit of the Empire, as a self autonomous state with equal rights and responsibility. Provincial Legislatures: Four-fifth of the members of ... to the Government of India as he does in relation to the government of self governing colonies.

Description : What is sediments that buried compacted and cemented together called?

Last Answer : What is the answer ?

Description : What kind of rock is formed from sediments that have been cemented or compacted?

Last Answer : Need answer

Description : Should fence posts be cemented in or gravel put in the holes ?

Last Answer : If you want your fence to last for a very long time I would definitely recommend cementing the posts in.

Description : Can a acrylic fixed upper roundhouse that was cemented over seven implants be sucessfully removed without causing problems with the implants If so, can another new roundhouse be made that can be screwed in so proper cleaning process can take place ?

Last Answer : IMPLANTS ARE SO PAINFUL I know there are dentise that can make your teeth to snap on and you can eat properly and speak You can get an new roundhoust that can be used over several implants in and can be correctly installed.

Description : how do we fit it in a bathroom Does it come with a stand with rollers that can be moved about or should it be cemented the floor?

Last Answer : Established in 1997, Madonna Home Solutions, has been amongst the pioneers in the introduction of Acrylic Bathtubs to the Indian market. Very soon, the company expanded its portfolio to include Shower ... Near Clarion Inn, Sirhind Road, Patiala - 147001 Contact Details: Landline: 0175-2354616, 017

Description : Plasmodesmata are (a) locomotory structures (b) membranes connecting the nucleus with plasmalemma (c) connections between adjacent cells (d) lignified cemented layers between cells.

Last Answer : (c) connections between adjacent cells

Description : Large tilt angle is best for a. Hard soil b. Sticky and non scouring soil c. Dry and cemented soil d. None of these

Last Answer : b. Sticky and non scouring soil

Description : Two concave lenses of 60 cm focal length are cemented on either side of a convex lens of 15 cm  focal length. The focal length of the combination is  (A) 10 cm  (B) 20 cm  (C) 30 cm  (D) 40 cm 

Last Answer : (C) 30 cm 

Description : The Auger boring method is not suitable for (A) Very hard soil (B) Cemented soil (C) Vary soft soil (D) All the above

Last Answer : Answer: Option D

Description : A vital tooth has a crown cemented to a pin-retained amalgam core; where does a failure occur: A. Between crown and cement B. Between core and cement C. In the crown and the root D. In the core and the margin preparation

Last Answer : B. Between core and cement

Description : Which pin system has proven to be the most retentive A. Self tapping threaded pin B. Friction peak pin C. Cemented pin

Last Answer : A. Self tapping threaded pin

Description : .Large tilt angle best for a) Hard soil b) Sticky and non-scouring soil c) Dry and cemented soil d None of the above

Last Answer : b) Sticky and non-scouring soil

Description : which stage represents optimum conditions for tillage a) Sticky b) Plastic c) Friable ( crumbly ). d) Hard ( cemented )

Last Answer : c) Friable ( crumbly

Description : Adjacent plant cells are “cemented” together by (A) Their primary walls (B) Their secondary walls (C) A middle lamella (D) Plasmodesmata

Last Answer : (C) A middle lamella

Description : A rock composed of cemented sand and gravel is: w) shale x) conglomerate y) granite z) marble

Last Answer : ANSWER: X -- CONGLOMERATE

Description : In geological studies, cemented volcanic ash is called: w) caldera x) a-a y) lava z) tuff

Last Answer : ANSWER: Z -- TUFF

Description : The saltation of sand grains refers to the sand grains: w) being coated with salt x) moving in jumps and bounces y) moving in a steady stream z) being cemented together

Last Answer : ANSWER: X -- MOVING IN JUMPS AND BOUNCES

Description : The most suitable refrigerant for a commercial ice plant is : (A) brine (B) NH3 (C) Freon (D) air

Last Answer : Ammonia NH3

Description : Dew point temperature is constant as long as there is : (A) no change in moisture content of the air (B) no change in volume of air (C) no change in dry bulb and wet bulb temperature (D) no change in relative and specific humidity of air

Last Answer : Dew point temperature is constant as long as there is : no change in moisture content of the air

Description : The comfort conditions in air conditioning are : (A) 22 ºC dry bulb temperature and 60% relative humidity (B) 25 ºC dry bulb temperature and 100% relative humidity (C) 20º C dry bulb temperature and 75% relative humidity (D) 15º C bulb temperature and 80% relative humidity

Last Answer : The comfort conditions in air conditioning are : 22 ºC dry bulb temperature and 60% relative humidity 

Description : Air is normally dehumidified by : (A) injecting water (B) passing steam (C) heating (D) cooling

Last Answer : 1

Description : A fluid in equilibrium cannot sustain : (A) tensile stress (B) compressive stress (C) shear stress (D) bending stress

Last Answer : A fluid in equilibrium cannot sustain : shear stress 

Description : Euler’s dimensionless number relates the following : (A) Inertial force and gravity (B) Viscous force and Inertial force (C) Pressure force and Inertial force (D) Pressure force and viscous force

Last Answer : Euler’s dimensionless number relates the following : Pressure force and Inertial force

Description : Power transmitted through a pipe is maximum when the loss of head due to friction is : (A) one-half of the total head supplied (B) one-third of the total head supplied (C) one-fourth of the total head supplied (D) zero

Last Answer : Power transmitted through a pipe is maximum when the loss of head due to friction is : one-third of the total head supplied 

Description : The efficiency of a centrifugal pump is maximum when its blades are : (A) straight (B) bent forward (C) bent backward (D) bent forward first and then backward

Last Answer : The efficiency of a centrifugal pump is maximum when its blades are : bent backward

Description :  In axial flow fans and turbines, fluid enters and leaves as follows : (A) radially, axially (B) axially, radially (C) axially, axially (D) radially, radially

Last Answer : In axial flow fans and turbines, fluid enters and leaves as follows : (A) radially, axially (B) axially, radially (C) axially, axially (D) radially, radially

Description : Military type of organisation is known as : (A) line organisation (B) functional organisation (C) line and staff organisation (D) line, staff and functional organisation 

Last Answer : Military type of organisation is known as : line organisation

Description : A systematic job improvement sequence will consist of : (A) motion study (B) time study (C) job enrichment (D) all of these

Last Answer : A systematic job improvement sequence will consist of : (A) motion study (B) time study (C) job enrichment (D) all of these

Description : Production cost refers to prime cost plus : (A) factory overheads (B) factory and administration overheads (C) factory, administration and sales overheads (D) factory, administration, sales overheads and profit

Last Answer : Production cost refers to prime cost plus : factory overheads

Description : In inventory control theory, the economic order quantity is : (A) average level of inventory (B) optimum lot size (C) capacity of a warehouse (D) lost size corresponding to break-even analysis

Last Answer : In inventory control theory, the economic order quantity is : optimum lot size 

Description : In value engineering, the term value refers to : (A) manufacturing cost of the product (B) selling price of the product (C) total cost of the product (D) utility of the product

Last Answer : In value engineering, the term value refers to : utility of the product

Description : The main object of scientific layout is : (A) to produce better quality of product (B) to utilise maximum floor area (C) to minimise production delays (D) all of these

Last Answer : The main object of scientific layout is : (A) to produce better quality of product (B) to utilise maximum floor area (C) to minimise production delays (D) all of these

Description : Gantt chart is used for : (A) inventory control (B) material handling (C) production schedule (D) machine repair schedules

Last Answer : Gantt chart is used for :  production schedule

Description :  A twist drill is a : (A) side cutting tool (B) front cutting tool (C) end cutting tool (D) none of these

Last Answer :  A twist drill is a : end cutting tool