The usual ratio of forward and return stroke in shaper is :

The usual ratio of forward and return stroke in shaper is : (A) 2:1 (B) 1:2 (C) 2:3 (D) 3:2
by

1 Answer

Answer :

The usual ratio of forward and return stroke in shaper is :  3:2


by
edited

Related questions

How fast will I see results in muscle tone in my thighs when using the Fitness Quest Leg Magic Body Shaper?

Description : How fast will I see results in muscle tone in my thighs when using the Fitness Quest Leg Magic Body Shaper?

Last Answer : Results come very quicly when using the Fitness Quest Leg Magic Body Shaper.

Where the best place to buy the body shaper for a woman?

Description : Where the best place to buy the body shaper for a woman?

Last Answer : The best place to buy one is where you can find it locally. Most stores that carry women's clothing will have a lingerie section where you can find body shapers. At a local store, you ... search online shops to see if the same brand and style is available for less money and better convenience.

The ratio of maximum displacement of the forced vibration to the deflection due to static force is known as :

Description : The ratio of maximum displacement of the forced vibration to the deflection due to static force is known as : (A) Damping Factor (B) Damping Coefficient (C) Logarithmic Decrement (D) Magnification Factor

Last Answer : Magnification Factor

Two metallic blocks having masses in the ratio 2:3 are made to slide down a frictionless inclined plane starting

Description : Two metallic blocks having masses in the ratio 2:3 are made to slide down a frictionless inclined plane starting from rest position. When the blocks reach the bottom of the inclined plane, they will have their kinetic energies in the ratio : (A) 2:3 (B) 3:5 (C) 3:2 (D) 7:4

Last Answer : Two metallic blocks having masses in the ratio 2:3 are made to slide down a frictionless inclined plane starting from rest position. When the blocks reach the bottom of the inclined plane, they will have their kinetic energies in the ratio : 2:3

When digoxin is used in a patient with congestive heart failure (CHF), it works by exerting a positive effect on (a) Stroke volume (b) Total peripheral resistance (c) Heart rate (d) Blood pressure (e) Venous return

Description : When digoxin is used in a patient with congestive heart failure (CHF), it works by exerting a positive effect on (a) Stroke volume (b) Total peripheral resistance (c) Heart rate (d) Blood pressure (e) Venous return

Last Answer : Ans: A

Mr. Grumper grumbles about bad time-keeping trains like everybody else. On one particular morning he was justified, though. The train left on time for the one hour journey and it arrived 5 minutes late. However, Mr. Grumper's watch showed it to be 3 minutes early, so he adjusted his watch by putting it forward 3 minutes. His watch kept time during the day, and on the return journey in the evening the train started on time, according to his watch, and arrived on time, according to the station clock. If the train traveled 25 percent faster on the return journey than it did on the morning journey, was the station clock fast or slow, and by how much? -Riddles

Description : Mr. Grumper grumbles about bad time-keeping trains like everybody else. On one particular morning he was justified, though. The train left on time for the one hour journey and it arrived 5 minutes late. ... did on the morning journey, was the station clock fast or slow, and by how much? -Riddles

Last Answer : The station clock is 3 minutes fast. The morning journey took 65 minutes, and the evening journey therefore took 52 minutes, and the train arrived 57 minutes after it should have left, that is, 3 minutes early.

Steam reforming of naphtha is a source of hydrogen production for nitrogenous fertiliser industry. What is the usual ratio of steam to carbon maintained in the process of steam reforming of naphtha? (A) 1.5 : 1 (B) 3.5 : 1 (C) 10 : 1 (D) 15 : 1

Description : Steam reforming of naphtha is a source of hydrogen production for nitrogenous fertiliser industry. What is the usual ratio of steam to carbon maintained in the process of steam reforming of naphtha? (A) 1.5 : 1 (B) 3.5 : 1 (C) 10 : 1 (D) 15 : 1

Last Answer : (B) 3.5 : 1

With usual notations, the expression V²/gR represents (A) Centrifugal force (B) Centrifugal ratio (C) Super elevation (D) Radial acceleration

Description : With usual notations, the expression V²/gR represents  (A) Centrifugal force  (B) Centrifugal ratio  (C) Super elevation  (D) Radial acceleration 

Last Answer : (B) Centrifugal ratio

The most suitable refrigerant for a commercial ice plant is :

Description : The most suitable refrigerant for a commercial ice plant is : (A) brine (B) NH3 (C) Freon (D) air

Last Answer : Ammonia NH3

Dew point temperature is constant as long as there is :

Description : Dew point temperature is constant as long as there is : (A) no change in moisture content of the air (B) no change in volume of air (C) no change in dry bulb and wet bulb temperature (D) no change in relative and specific humidity of air

Last Answer : Dew point temperature is constant as long as there is : no change in moisture content of the air

The comfort conditions in air conditioning are :

Description : The comfort conditions in air conditioning are : (A) 22 ºC dry bulb temperature and 60% relative humidity (B) 25 ºC dry bulb temperature and 100% relative humidity (C) 20º C dry bulb temperature and 75% relative humidity (D) 15º C bulb temperature and 80% relative humidity

Last Answer : The comfort conditions in air conditioning are : 22 ºC dry bulb temperature and 60% relative humidity 

Air is normally dehumidified by :

Description : Air is normally dehumidified by : (A) injecting water (B) passing steam (C) heating (D) cooling

Last Answer : 1

A fluid in equilibrium cannot sustain :

Description : A fluid in equilibrium cannot sustain : (A) tensile stress (B) compressive stress (C) shear stress (D) bending stress

Last Answer : A fluid in equilibrium cannot sustain : shear stress 

Euler’s dimensionless number relates the following :

Description : Euler’s dimensionless number relates the following : (A) Inertial force and gravity (B) Viscous force and Inertial force (C) Pressure force and Inertial force (D) Pressure force and viscous force

Last Answer : Euler’s dimensionless number relates the following : Pressure force and Inertial force

Power transmitted through a pipe is maximum when the loss of head due to friction is :

Description : Power transmitted through a pipe is maximum when the loss of head due to friction is : (A) one-half of the total head supplied (B) one-third of the total head supplied (C) one-fourth of the total head supplied (D) zero

Last Answer : Power transmitted through a pipe is maximum when the loss of head due to friction is : one-third of the total head supplied 

The efficiency of a centrifugal pump is maximum when its blades are :

Description : The efficiency of a centrifugal pump is maximum when its blades are : (A) straight (B) bent forward (C) bent backward (D) bent forward first and then backward

Last Answer : The efficiency of a centrifugal pump is maximum when its blades are : bent backward

In axial flow fans and turbines, fluid enters and leaves as follows :

Description :  In axial flow fans and turbines, fluid enters and leaves as follows : (A) radially, axially (B) axially, radially (C) axially, axially (D) radially, radially

Last Answer : In axial flow fans and turbines, fluid enters and leaves as follows : (A) radially, axially (B) axially, radially (C) axially, axially (D) radially, radially

Military type of organisation is known as :

Description : Military type of organisation is known as : (A) line organisation (B) functional organisation (C) line and staff organisation (D) line, staff and functional organisation 

Last Answer : Military type of organisation is known as : line organisation

A systematic job improvement sequence will consist of :

Description : A systematic job improvement sequence will consist of : (A) motion study (B) time study (C) job enrichment (D) all of these

Last Answer : A systematic job improvement sequence will consist of : (A) motion study (B) time study (C) job enrichment (D) all of these

Production cost refers to prime cost plus :

Description : Production cost refers to prime cost plus : (A) factory overheads (B) factory and administration overheads (C) factory, administration and sales overheads (D) factory, administration, sales overheads and profit

Last Answer : Production cost refers to prime cost plus : factory overheads

In inventory control theory, the economic order quantity is :

Description : In inventory control theory, the economic order quantity is : (A) average level of inventory (B) optimum lot size (C) capacity of a warehouse (D) lost size corresponding to break-even analysis

Last Answer : In inventory control theory, the economic order quantity is : optimum lot size 

In value engineering, the term value refers to :

Description : In value engineering, the term value refers to : (A) manufacturing cost of the product (B) selling price of the product (C) total cost of the product (D) utility of the product

Last Answer : In value engineering, the term value refers to : utility of the product

The main object of scientific layout is :

Description : The main object of scientific layout is : (A) to produce better quality of product (B) to utilise maximum floor area (C) to minimise production delays (D) all of these

Last Answer : The main object of scientific layout is : (A) to produce better quality of product (B) to utilise maximum floor area (C) to minimise production delays (D) all of these

Gantt chart is used for :

Description : Gantt chart is used for : (A) inventory control (B) material handling (C) production schedule (D) machine repair schedules

Last Answer : Gantt chart is used for :  production schedule

A twist drill is a :

Description :  A twist drill is a : (A) side cutting tool (B) front cutting tool (C) end cutting tool (D) none of these

Last Answer :  A twist drill is a : end cutting tool 

Tool life is most affected by :

Description : Tool life is most affected by : (A) cutting speed (B) tool geometry (C) feed and depth (D) microstructure of material being cut

Last Answer : Tool life is most affected by : cutting speed 

Binding material used in cemented carbide tools is :

Description : Binding material used in cemented carbide tools is : (A) Nickel (B) Cobalt (C) Chromium (D) Silicon

Last Answer : Binding material used in cemented carbide tools is : Cobalt 

Angle between the shear plane and work surface is known as :

Description : Angle between the shear plane and work surface is known as : (A) lip angle (B) rake angle (C) cutting angle (D) shear angle

Last Answer : Angle between the shear plane and work surface is known as : shear angle

Material having highest cutting speed is :

Description : Material having highest cutting speed is : (A) Cast iron (B) Bronze (C) Aluminium (D) High carbon steel

Last Answer : Material having highest cutting speed is : Aluminium

If the rotating mass of a rim type flywheel is distributed on another rim type flywheel whose mean radius is

Description : If the rotating mass of a rim type flywheel is distributed on another rim type flywheel whose mean radius is half the mean radius of the former, then the energy stored in the latter at the same speed will be : ... at the first one (C) One fourth of the first one (D) One and half times the first one

Last Answer : If the rotating mass of a rim type flywheel is distributed on another rim type flywheel whose mean radius is half the mean radius of the former, then the energy stored in the latter at the same speed will be : One fourth of the first one

The train value of a gear train is :

Description : The train value of a gear train is : (A) equal to velocity ratio (B) reciprocal of velocity ratio (C) always greater than unity (D) none of the above

Last Answer : The train value of a gear train is : reciprocal of velocity ratio

A casting defect which occurs near the ingates as rough lumps on the surface of a casting is known as

Description : A casting defect which occurs near the ingates as rough lumps on the surface of a casting is known as 1. Shift 2. Sand wash 3. Swell 4. Scab

Last Answer : A casting defect which occurs near the ingates as rough lumps on the surface of a casting is known as Sand wash

The property of sand due to which the sand grains stick together, is called

Description : The property of sand due to which the sand grains stick together, is called 1. Collapsibility 2. Permeability 3. Cohesiveness 4. Adhesiveness

Last Answer : The property of sand due to which the sand grains stick together, is called Cohesiveness 

In die casting, machining allowance is

Description : In die casting, machining allowance is 1. Small 2. Large 3. Very large 4. Not provided

Last Answer : In die casting, machining allowance is Not provided

The mode of deformation of the metal during spinning is

Description : The mode of deformation of the metal during spinning is 1.Bending 2.Stretching 3.Bending and stretching 4.Rolling and stretching

Last Answer : The mode of deformation of the metal during spinning is Bending and stretching

Structural sections such as rails, angles, I-beams are made by

Description : Structural sections such as rails, angles, I-beams are made by 1. Hot rolling 2. Hot drawing 3. Hot piercing 4. Hot extrusion

Last Answer : Structural sections such as rails, angles, I-beams are made by Hot rolling

The process extensively used for making bolts and nuts is

Description : The process extensively used for making bolts and nuts is 1. Hot piercing 2. Extrusion 3. Cold peening 4. Cold heading

Last Answer : The process extensively used for making bolts and nuts is Cold heading

The cold chisels are made by

Description : The cold chisels are made by 1. Drawing 2. Rolling 3. Forging 4. Piercing

Last Answer : The cold chisels are made by Forging 

Welding of glass is done by

Description : Welding of glass is done by 1. Ultrasonic welding 2. Electron beam welding 3. Laser beam welding 4. Explosive welding

Last Answer : Welding of glass is done by Laser beam welding

Linde welding uses

Description : Linde welding uses 1.Neutral flame and rightward technique 2.Carburizing flame and rightward technique 3.Neutral flame and leftward technique 4.Oxidizing flame and leftward technique

Last Answer : Linde welding uses Carburizing flame and rightward technique

The ratio of work done per cycle to the stroke volume of the compressor is known as A. Compressor capacity B. Compression ratio C. Compressor efficiency D. Mean effective pressure

Description : The ratio of work done per cycle to the stroke volume of the compressor is known as A. Compressor capacity B. Compression ratio C. Compressor efficiency D. Mean effective pressure

Last Answer : ANSWER : D

An engine working on air standard Otto cycle has a cylinder diameter of 10 cm and stroke length of 15 cm. The ratio of specific heats for air is 1.4. If the clearance volume is 196.3 cc and the heat supplied per kg of air per cycle is 1800 kJ/kg, then work output per cycle per kg of air is a. 879.1 kJ/ b. 890.2 kJ c. 895.3 kJ d. 973.5 kJ

Description : An engine working on air standard Otto cycle has a cylinder diameter of 10 cm and stroke length of 15 cm. The ratio of specific heats for air is 1.4. If the clearance volume is 196.3 cc and the heat supplied per kg of air per ... kg of air is a. 879.1 kJ/ b. 890.2 kJ c. 895.3 kJ d. 973.5 kJ

Last Answer : ANSWER d. 973.5 kJ

A patient who has had a previous stroke and is taking warfarin tells the nurse that he started taking garlic to help reduce his blood pressure. The nurse knows that garlic when taken together with warfarin a) can greatly increase the international normalization ratio (INR) and therefore increase the risk of bleeding. Garlic and warfarin taken together can greatly increase the INR, increasing the risk of bleeding.

Description : A patient who has had a previous stroke and is taking warfarin tells the nurse that he started taking garlic to help reduce his blood pressure. The nurse knows that garlic when taken ... headaches. Garlic and warfarin taken together can greatly increase the INR, increasing the risk of bleeding.

Last Answer : a) can greatly increase the international normalization ratio (INR) and therefore increase the risk of bleeding. Garlic and warfarin taken together can greatly increase the INR, increasing the risk of bleeding.

Stroke bore ratio for tractor engine is (a) 1.25 (b) 1.45 (c) 1.75 (d) 2.00

Description : Stroke bore ratio for tractor engine is (a) 1.25 (b) 1.45 (c) 1.75 (d) 2.00

Last Answer : (a) 1.25

While increasing the forward speed of the combine harvester speed of reel should be a) Increased in same ratio b) Decreased in same ratio c) No changes d) Doubled Ans. a

Description : While increasing the forward speed of the combine harvester speed of reel should be a) Increased in same ratio b) Decreased in same ratio c) No changes d) Doubled Ans. a

Last Answer : ans a

What is the typical back-to-forward resistance ratio of a good-quality diode?

Description : What is the typical back-to-forward resistance ratio of a good-quality diode?

Last Answer : 10-to-1 ratio.

As a rule of thumb, what is an acceptable ratio of back-to forward resistance for a diode?

Description : As a rule of thumb, what is an acceptable ratio of back-to forward resistance for a diode?

Last Answer : Greater than 10 to 1

The average spacing of seeds or hills in field is obtained or determined by a) The ratio of linear or peripheral speed of seed pick up units (cells fingers, etc) to the forward speed of the planter b) The distance between the speed pick up units (cells) on the metering unit c) Both (a) and (b) d) None of the above

Description : The average spacing of seeds or hills in field is obtained or determined by a) The ratio of linear or peripheral speed of seed pick up units (cells fingers, etc) to the forward speed of the planter b) The distance ... up units (cells) on the metering unit c) Both (a) and (b) d) None of the above

Last Answer : c) Both (a) and (b)

The ratio of reel peripheral speed to forward speed of combine is called (a)velocity index (b)angular velocity index (c)reel speed index (d) kinematic index

Description : The ratio of reel peripheral speed to forward speed of combine is called (a)velocity index (b)angular velocity index (c)reel speed index (d) kinematic index

Last Answer : (c)reel speed index