The main object of scientific layout is : (A) to produce better quality of product (B) to utilise maximum floor area (C) to minimise production delays (D) all of these

1 Answer

Answer :

The main object of scientific layout is : (A) to produce better quality of product (B) to utilise maximum floor area (C) to minimise production delays (D) all of these

Related questions

Description : The most suitable refrigerant for a commercial ice plant is : (A) brine (B) NH3 (C) Freon (D) air

Last Answer : Ammonia NH3

Description : Dew point temperature is constant as long as there is : (A) no change in moisture content of the air (B) no change in volume of air (C) no change in dry bulb and wet bulb temperature (D) no change in relative and specific humidity of air

Last Answer : Dew point temperature is constant as long as there is : no change in moisture content of the air

Description : The comfort conditions in air conditioning are : (A) 22 ºC dry bulb temperature and 60% relative humidity (B) 25 ºC dry bulb temperature and 100% relative humidity (C) 20º C dry bulb temperature and 75% relative humidity (D) 15º C bulb temperature and 80% relative humidity

Last Answer : The comfort conditions in air conditioning are : 22 ºC dry bulb temperature and 60% relative humidity 

Description : Air is normally dehumidified by : (A) injecting water (B) passing steam (C) heating (D) cooling

Last Answer : 1

Description : A fluid in equilibrium cannot sustain : (A) tensile stress (B) compressive stress (C) shear stress (D) bending stress

Last Answer : A fluid in equilibrium cannot sustain : shear stress 

Description : Euler’s dimensionless number relates the following : (A) Inertial force and gravity (B) Viscous force and Inertial force (C) Pressure force and Inertial force (D) Pressure force and viscous force

Last Answer : Euler’s dimensionless number relates the following : Pressure force and Inertial force

Description : Power transmitted through a pipe is maximum when the loss of head due to friction is : (A) one-half of the total head supplied (B) one-third of the total head supplied (C) one-fourth of the total head supplied (D) zero

Last Answer : Power transmitted through a pipe is maximum when the loss of head due to friction is : one-third of the total head supplied 

Description : The efficiency of a centrifugal pump is maximum when its blades are : (A) straight (B) bent forward (C) bent backward (D) bent forward first and then backward

Last Answer : The efficiency of a centrifugal pump is maximum when its blades are : bent backward

Description :  In axial flow fans and turbines, fluid enters and leaves as follows : (A) radially, axially (B) axially, radially (C) axially, axially (D) radially, radially

Last Answer : In axial flow fans and turbines, fluid enters and leaves as follows : (A) radially, axially (B) axially, radially (C) axially, axially (D) radially, radially

Description : Military type of organisation is known as : (A) line organisation (B) functional organisation (C) line and staff organisation (D) line, staff and functional organisation 

Last Answer : Military type of organisation is known as : line organisation

Description : A systematic job improvement sequence will consist of : (A) motion study (B) time study (C) job enrichment (D) all of these

Last Answer : A systematic job improvement sequence will consist of : (A) motion study (B) time study (C) job enrichment (D) all of these

Description : Production cost refers to prime cost plus : (A) factory overheads (B) factory and administration overheads (C) factory, administration and sales overheads (D) factory, administration, sales overheads and profit

Last Answer : Production cost refers to prime cost plus : factory overheads

Description : In inventory control theory, the economic order quantity is : (A) average level of inventory (B) optimum lot size (C) capacity of a warehouse (D) lost size corresponding to break-even analysis

Last Answer : In inventory control theory, the economic order quantity is : optimum lot size 

Description : In value engineering, the term value refers to : (A) manufacturing cost of the product (B) selling price of the product (C) total cost of the product (D) utility of the product

Last Answer : In value engineering, the term value refers to : utility of the product

Description : Gantt chart is used for : (A) inventory control (B) material handling (C) production schedule (D) machine repair schedules

Last Answer : Gantt chart is used for :  production schedule

Description :  A twist drill is a : (A) side cutting tool (B) front cutting tool (C) end cutting tool (D) none of these

Last Answer :  A twist drill is a : end cutting tool 

Description : Tool life is most affected by : (A) cutting speed (B) tool geometry (C) feed and depth (D) microstructure of material being cut

Last Answer : Tool life is most affected by : cutting speed 

Description : The usual ratio of forward and return stroke in shaper is : (A) 2:1 (B) 1:2 (C) 2:3 (D) 3:2

Last Answer : The usual ratio of forward and return stroke in shaper is :  3:2

Description : Binding material used in cemented carbide tools is : (A) Nickel (B) Cobalt (C) Chromium (D) Silicon

Last Answer : Binding material used in cemented carbide tools is : Cobalt 

Description : Angle between the shear plane and work surface is known as : (A) lip angle (B) rake angle (C) cutting angle (D) shear angle

Last Answer : Angle between the shear plane and work surface is known as : shear angle

Description : Material having highest cutting speed is : (A) Cast iron (B) Bronze (C) Aluminium (D) High carbon steel

Last Answer : Material having highest cutting speed is : Aluminium

Description : If the rotating mass of a rim type flywheel is distributed on another rim type flywheel whose mean radius is half the mean radius of the former, then the energy stored in the latter at the same speed will be : ... at the first one (C) One fourth of the first one (D) One and half times the first one

Last Answer : If the rotating mass of a rim type flywheel is distributed on another rim type flywheel whose mean radius is half the mean radius of the former, then the energy stored in the latter at the same speed will be : One fourth of the first one

Description : The train value of a gear train is : (A) equal to velocity ratio (B) reciprocal of velocity ratio (C) always greater than unity (D) none of the above

Last Answer : The train value of a gear train is : reciprocal of velocity ratio

Description : The ratio of maximum displacement of the forced vibration to the deflection due to static force is known as : (A) Damping Factor (B) Damping Coefficient (C) Logarithmic Decrement (D) Magnification Factor

Last Answer : Magnification Factor

Description : Two metallic blocks having masses in the ratio 2:3 are made to slide down a frictionless inclined plane starting from rest position. When the blocks reach the bottom of the inclined plane, they will have their kinetic energies in the ratio : (A) 2:3 (B) 3:5 (C) 3:2 (D) 7:4

Last Answer : Two metallic blocks having masses in the ratio 2:3 are made to slide down a frictionless inclined plane starting from rest position. When the blocks reach the bottom of the inclined plane, they will have their kinetic energies in the ratio : 2:3

Description : A casting defect which occurs near the ingates as rough lumps on the surface of a casting is known as 1. Shift 2. Sand wash 3. Swell 4. Scab

Last Answer : A casting defect which occurs near the ingates as rough lumps on the surface of a casting is known as Sand wash

Description : The property of sand due to which the sand grains stick together, is called 1. Collapsibility 2. Permeability 3. Cohesiveness 4. Adhesiveness

Last Answer : The property of sand due to which the sand grains stick together, is called Cohesiveness 

Description : In die casting, machining allowance is 1. Small 2. Large 3. Very large 4. Not provided

Last Answer : In die casting, machining allowance is Not provided

Description : The mode of deformation of the metal during spinning is 1.Bending 2.Stretching 3.Bending and stretching 4.Rolling and stretching

Last Answer : The mode of deformation of the metal during spinning is Bending and stretching

Description : Structural sections such as rails, angles, I-beams are made by 1. Hot rolling 2. Hot drawing 3. Hot piercing 4. Hot extrusion

Last Answer : Structural sections such as rails, angles, I-beams are made by Hot rolling

Description : The process extensively used for making bolts and nuts is 1. Hot piercing 2. Extrusion 3. Cold peening 4. Cold heading

Last Answer : The process extensively used for making bolts and nuts is Cold heading

Description : The cold chisels are made by 1. Drawing 2. Rolling 3. Forging 4. Piercing

Last Answer : The cold chisels are made by Forging 

Description : Welding of glass is done by 1. Ultrasonic welding 2. Electron beam welding 3. Laser beam welding 4. Explosive welding

Last Answer : Welding of glass is done by Laser beam welding

Description : Linde welding uses 1.Neutral flame and rightward technique 2.Carburizing flame and rightward technique 3.Neutral flame and leftward technique 4.Oxidizing flame and leftward technique

Last Answer : Linde welding uses Carburizing flame and rightward technique

Description : Which of the following correctly defines the main concept behind Conversion Optimization? a. Rapidly making significant changes to check which one possesses the fastest results b. Making insignificant ... result d. Frequently changing the website's layout to see if it appeals to more audience

Last Answer : b. Making insignificant incremental changes over time to check which one possesses the best results

Description : After being mistreated by the moderators at Quora for the 3rd time, I started looking for an alternative. Yahoo answers isn't to my taste, several of the others I found in searches are no longer up...is Fluther the best Quora alternative? The layout is ok, but it seems pretty slow compared to Quora.

Last Answer : At some point, you need to look more critically at the common denominator and less at others. If you are still blaming others at your age, Fluther may be uncomfortable for you. Or comfy, considering all of the youth.

Description : What superstitions have you heard about house location and layout?

Last Answer : I was always told that any elephant pictures or statues/ornaments should always face the door otherwise they will bring bad luck.

Description : Is there a newspaper layout available on Word?

Last Answer : You can create tables to approximate a news paper layout. Go to word and then page layout then to columns.

Description : How has the appearance and layout of web sites changed over the last 8 or so years?

Last Answer : answer:8 years takes us back to the beginning of sites really moving towards standards , meaning tableless layouts based on markup and CSS. That's a huge change that was just finding widespread use ... probably has some of them saved if you want to check out how they actually operated as well.

Description : Linux question on screen layout and behavior - how flexible is Ubuntu's standard interface?

Last Answer : answer:I know you can do 2] because I've done it so long ago now that I can't remember how, but I would have googled something like linux move taskbar to bottom - and I recall that it was ... the layout more familiar, so there are a lot of forum posts along those lines. Not so sure about 1].

Description : How many people type using the Dvorak keyboard layout?

Last Answer : answer:Thanks for the link, @ben. I'm looking forward to trying it out. When I first learned that there even was a Dvorak keyboard / layout, I had been touch typing QWERTY for over a decade (and it wasn't ... to switch on a typewriter!). But the zine was very informative. I think I'll give it a go.

Description : Would anyone be willing to change a tumblr layout?

Last Answer : Customize, and mess around with the tables colors.

Description : How to manually put a background image on a tumblr layout that happens to have that feature disabled?

Last Answer : Step one – EDIT HTML button. Step two – Note the highlighted part. Chang it to the url for the image you want.

Description : New Facebook layout question: Is there a way to display birthdays on the homepage?

Last Answer : I just got on Facebook a minute ago, and the layout has changed again. They made it easier to get to the most recent stories, gave the option of turning off notifications for close friends, and now ... pretty sure they just adjusted it so we would be able to see them. Perhaps you should look again?

Description : What are your thoughts on the new FB layout (with a shiny new "stalker feed")

Last Answer : I rolled my eyes when I learnt that I had to work out yet another new layout but, like with the last change, I’ll get used to it so no point in bitching.

Description : What's a good layout for my tumblr page?

Last Answer : why don’t you try a layout where you can change the background? seems much better though

Description : What's the best floor tape to use to layout a volleyball court on a gym floor?

Last Answer : Athletic tape

Description : Choosing a Spanish keyboard layout for Windows?

Last Answer : answer:I have a Spanish keyboard, and as far as I can tell, there are only a few very minor differences from english ones. To the right of my L' key I have 'Ñ'. and a couple of symbols ... random and stick with it. the subtle differences are too small to invest the time it would take to learn it.

Description : How do I get pixel measurements on a layout prototype easily?

Last Answer : answer:I use Scribus for that sort of stuff. It allows me to choose the default units (px, pt, in, etc) for each drawing (in Page ->Manage Page Properties and also in File -> Document Setup) ... that help? Did I understand your need correctly? Sorry, but I know nothing about Fireworks. Good luck! :)

Description : What houses should I get for my HO scale train layout?

Last Answer : How about these?