Description : In inventory control theory, the economic order quantity (EOQ) is the (A) Lot size corresponding to break even analysis (B) Average level of inventory (C) Optimum lot size (D) None of these
Last Answer : (C) Optimum lot size
Description : Economic order quantity is that quantity at which cost of holding and carrying inventory is: (a) Maximum and equal (b) Minimum and equal (c) It can be maximum or minimum depending upon case to case. (d) Minimum and unequal
Last Answer : (b) Minimum and equal
Description : A manufacturer has decided to improve its inventory management by maintaining low inventory levels and waiting to purchase materials until right before they are needed in production. This inventory ... time (JIT). B)inventory minimisation. C)economic order quantity.D)reorder point maximisation.
Last Answer : D)reorder point maximisation.
Description : ............... model is designed to bring prices down by increasing the number of customers who buy a particular product at once. (A) Economic Order Quantity (B) Inventory (C) Data Mining (D) Demand-Sensitive Pricing
Last Answer : (D) Demand-Sensitive Pricing
Description : ABC analysis is an inventory control technique in which: (a) Inventory levels are maintained (b) Inventory is classified into A, B and C category with A being the highest quantity, lowest value. (c) ... A, B and C Category with A being the lowest quantity, highest value (d) Either b or c
Last Answer : (c) Inventory is classified into A, B and C Category with A being the lowest quantity, highest value
Description : ............................... is used to imitate an operation prior to actual performance. a. Inventory control b. Simulation c. Game theory d. Integrated Production Model
Last Answer : b. Simulation
Description : Identify which technique will not help a company to optimise its working capital cycle. A. Offering discounts for early payment by debtors B. Using cash management models to optimise the level of ... order quantity model to stock management E. Adopting the use of just-in-time stock management
Last Answer : B. Using cash management models to optimise the level of cash held
Description : If the demand for an item is trebled and the order cost is reduced to one third, then the economic order quantity (A) Is trebled (B) Remains unchanged (C) Decreases by a factor of 3 (D) Decreases by a factor of 1/3
Last Answer : (B) Remains unchanged
Description : The maximum quantity that a supplier is prepared to supply in the market at a given price is called (a) Economic order quantity ; (b) Optimum quantity ; (c) Supply quantity ; (d) Both or quantity
Last Answer : ; (c) Supply quantity ;
Description : The process of preparing an inventory of skills needed for effective implementation of the project is called as ____________. A. Economic viability. B. Financial feasibility. C. Technical feasibility. D. Managerial competence.
Last Answer : D. Managerial competence.
Description : Vector A. It do not need the control of the human operator during their execution B. An arrow in a multi-dimensional space. It is a quantity usually characterized by an ordered set of scalars C. The validation of a theory on the basis of a finite number of examples D. None of these
Last Answer : B. An arrow in a multi-dimensional space. It is a quantity usually characterized by an ordered set of scalars
Description : The most suitable refrigerant for a commercial ice plant is : (A) brine (B) NH3 (C) Freon (D) air
Last Answer : Ammonia NH3
Description : Dew point temperature is constant as long as there is : (A) no change in moisture content of the air (B) no change in volume of air (C) no change in dry bulb and wet bulb temperature (D) no change in relative and specific humidity of air
Last Answer : Dew point temperature is constant as long as there is : no change in moisture content of the air
Description : The comfort conditions in air conditioning are : (A) 22 ºC dry bulb temperature and 60% relative humidity (B) 25 ºC dry bulb temperature and 100% relative humidity (C) 20º C dry bulb temperature and 75% relative humidity (D) 15º C bulb temperature and 80% relative humidity
Last Answer : The comfort conditions in air conditioning are : 22 ºC dry bulb temperature and 60% relative humidity
Description : Air is normally dehumidified by : (A) injecting water (B) passing steam (C) heating (D) cooling
Last Answer : 1
Description : A fluid in equilibrium cannot sustain : (A) tensile stress (B) compressive stress (C) shear stress (D) bending stress
Last Answer : A fluid in equilibrium cannot sustain : shear stress
Description : Euler’s dimensionless number relates the following : (A) Inertial force and gravity (B) Viscous force and Inertial force (C) Pressure force and Inertial force (D) Pressure force and viscous force
Last Answer : Euler’s dimensionless number relates the following : Pressure force and Inertial force
Description : Power transmitted through a pipe is maximum when the loss of head due to friction is : (A) one-half of the total head supplied (B) one-third of the total head supplied (C) one-fourth of the total head supplied (D) zero
Last Answer : Power transmitted through a pipe is maximum when the loss of head due to friction is : one-third of the total head supplied
Description : The efficiency of a centrifugal pump is maximum when its blades are : (A) straight (B) bent forward (C) bent backward (D) bent forward first and then backward
Last Answer : The efficiency of a centrifugal pump is maximum when its blades are : bent backward
Description : In axial flow fans and turbines, fluid enters and leaves as follows : (A) radially, axially (B) axially, radially (C) axially, axially (D) radially, radially
Last Answer : In axial flow fans and turbines, fluid enters and leaves as follows : (A) radially, axially (B) axially, radially (C) axially, axially (D) radially, radially
Description : Military type of organisation is known as : (A) line organisation (B) functional organisation (C) line and staff organisation (D) line, staff and functional organisation
Last Answer : Military type of organisation is known as : line organisation
Description : A systematic job improvement sequence will consist of : (A) motion study (B) time study (C) job enrichment (D) all of these
Last Answer : A systematic job improvement sequence will consist of : (A) motion study (B) time study (C) job enrichment (D) all of these
Description : Production cost refers to prime cost plus : (A) factory overheads (B) factory and administration overheads (C) factory, administration and sales overheads (D) factory, administration, sales overheads and profit
Last Answer : Production cost refers to prime cost plus : factory overheads
Description : In value engineering, the term value refers to : (A) manufacturing cost of the product (B) selling price of the product (C) total cost of the product (D) utility of the product
Last Answer : In value engineering, the term value refers to : utility of the product
Description : The main object of scientific layout is : (A) to produce better quality of product (B) to utilise maximum floor area (C) to minimise production delays (D) all of these
Last Answer : The main object of scientific layout is : (A) to produce better quality of product (B) to utilise maximum floor area (C) to minimise production delays (D) all of these
Description : Gantt chart is used for : (A) inventory control (B) material handling (C) production schedule (D) machine repair schedules
Last Answer : Gantt chart is used for : production schedule
Description : A twist drill is a : (A) side cutting tool (B) front cutting tool (C) end cutting tool (D) none of these
Last Answer : A twist drill is a : end cutting tool
Description : Tool life is most affected by : (A) cutting speed (B) tool geometry (C) feed and depth (D) microstructure of material being cut
Last Answer : Tool life is most affected by : cutting speed
Description : The usual ratio of forward and return stroke in shaper is : (A) 2:1 (B) 1:2 (C) 2:3 (D) 3:2
Last Answer : The usual ratio of forward and return stroke in shaper is : 3:2
Description : Binding material used in cemented carbide tools is : (A) Nickel (B) Cobalt (C) Chromium (D) Silicon
Last Answer : Binding material used in cemented carbide tools is : Cobalt
Description : Angle between the shear plane and work surface is known as : (A) lip angle (B) rake angle (C) cutting angle (D) shear angle
Last Answer : Angle between the shear plane and work surface is known as : shear angle
Description : Material having highest cutting speed is : (A) Cast iron (B) Bronze (C) Aluminium (D) High carbon steel
Last Answer : Material having highest cutting speed is : Aluminium
Description : If the rotating mass of a rim type flywheel is distributed on another rim type flywheel whose mean radius is half the mean radius of the former, then the energy stored in the latter at the same speed will be : ... at the first one (C) One fourth of the first one (D) One and half times the first one
Last Answer : If the rotating mass of a rim type flywheel is distributed on another rim type flywheel whose mean radius is half the mean radius of the former, then the energy stored in the latter at the same speed will be : One fourth of the first one
Description : The train value of a gear train is : (A) equal to velocity ratio (B) reciprocal of velocity ratio (C) always greater than unity (D) none of the above
Last Answer : The train value of a gear train is : reciprocal of velocity ratio
Description : The ratio of maximum displacement of the forced vibration to the deflection due to static force is known as : (A) Damping Factor (B) Damping Coefficient (C) Logarithmic Decrement (D) Magnification Factor
Last Answer : Magnification Factor
Description : Two metallic blocks having masses in the ratio 2:3 are made to slide down a frictionless inclined plane starting from rest position. When the blocks reach the bottom of the inclined plane, they will have their kinetic energies in the ratio : (A) 2:3 (B) 3:5 (C) 3:2 (D) 7:4
Last Answer : Two metallic blocks having masses in the ratio 2:3 are made to slide down a frictionless inclined plane starting from rest position. When the blocks reach the bottom of the inclined plane, they will have their kinetic energies in the ratio : 2:3
Description : A casting defect which occurs near the ingates as rough lumps on the surface of a casting is known as 1. Shift 2. Sand wash 3. Swell 4. Scab
Last Answer : A casting defect which occurs near the ingates as rough lumps on the surface of a casting is known as Sand wash
Description : The property of sand due to which the sand grains stick together, is called 1. Collapsibility 2. Permeability 3. Cohesiveness 4. Adhesiveness
Last Answer : The property of sand due to which the sand grains stick together, is called Cohesiveness
Description : In die casting, machining allowance is 1. Small 2. Large 3. Very large 4. Not provided
Last Answer : In die casting, machining allowance is Not provided
Description : The mode of deformation of the metal during spinning is 1.Bending 2.Stretching 3.Bending and stretching 4.Rolling and stretching
Last Answer : The mode of deformation of the metal during spinning is Bending and stretching
Description : Structural sections such as rails, angles, I-beams are made by 1. Hot rolling 2. Hot drawing 3. Hot piercing 4. Hot extrusion
Last Answer : Structural sections such as rails, angles, I-beams are made by Hot rolling
Description : The process extensively used for making bolts and nuts is 1. Hot piercing 2. Extrusion 3. Cold peening 4. Cold heading
Last Answer : The process extensively used for making bolts and nuts is Cold heading
Description : The cold chisels are made by 1. Drawing 2. Rolling 3. Forging 4. Piercing
Last Answer : The cold chisels are made by Forging
Description : Welding of glass is done by 1. Ultrasonic welding 2. Electron beam welding 3. Laser beam welding 4. Explosive welding
Last Answer : Welding of glass is done by Laser beam welding
Description : Linde welding uses 1.Neutral flame and rightward technique 2.Carburizing flame and rightward technique 3.Neutral flame and leftward technique 4.Oxidizing flame and leftward technique
Last Answer : Linde welding uses Carburizing flame and rightward technique
Description : Would you have any idea where one could look for help using Microsoft Office ? Help in understanding templates and other things Microsoft Office does. This is in order to inventory personal collection of books. A Site with ‘newbie-friendly’ instuctions.
Last Answer : What version of Office do you have? I’ve had good luck using the online help. There’s a lot of templates out there that you can download and use, or you can take one of those and create your own.
Description : A physical count of inventory is taken at the end of an accounting period under a periodic system in order to a. verify the accuracy of the accounting records. b. determine cost of goods ... period. c. determine the amount of inventory purchased during the period. d. calculate property taxes.
Last Answer : b. determine cost of goods sold for the period.
Description : A physical count of inventory is taken at the end of an accounting period under a perpetual system in order to a. verify the accuracy of the accounting records. b. determine cost of ... period. c. determine the amount of inventory purchased during the period. d. calculate property taxes.
Last Answer : a. verify the accuracy of the accounting records.
Description : A ltd is a manufacturing company that has no production resource limitations for the foreseeable future. The Managing Director has asked the company mangers to coordinate the preparation of their budgets for the next financial year. In what order ... 5), (3), (2) (d) (4), (5), (3), (1), (2)
Last Answer : (b) (1), (5), (3), (4), (2)
Description : Suppose the inventory manager at Hotpoint intends to lower stockout costs. Which of the following is considered a stockout cost that the manager at Hotpoint might address? A)Price of washing ... to short supply of dishwashers C)Order -processing expenses D)Expenses of backordering small appliances
Last Answer : B)Sales lost due to short supply of dishwashers