In practice, a current source inverter consists of an AC/ DC converter with a large inductance ‘L’ in the output.

In practice, a current source inverter consists of an AC/ DC converter with a large inductance ‘L’ in the output. This inductance maintains a ……… …………through the switching devices over short interval of time. A) constant current B) constant voltage C) constant power D) none of the (A), (B), (C)
by

1 Answer

Answer :

In practice, a current source inverter consists of an AC/ DC converter with a large inductance ‘L’ in the output. This inductance maintains a constant current through the switching devices over short interval of time. 

by

Related questions

The MIL is illuminated and a battery module deterioration diagnostic trouble code is stored the most like cause is a failed by a) High voltage battery b) High voltage inverter c) Motor/ generator d) DC/ DC converter

Description : The MIL is illuminated and a battery module deterioration diagnostic trouble code is stored the most like cause is a failed by a) High voltage battery b) High voltage inverter c) Motor/ generator d) DC/ DC converter

Last Answer : a) High voltage battery

In a dc-ac 3-phase MOSFET bridge inverter circuit, the switches are marked in a sequence as 1, 2, 3 in the...

Description : In a dc-ac 3-phase MOSFET bridge inverter circuit, the switches are marked in a sequence as 1, 2, 3 in the top-half and 4, 5, 6 in the bottom half of the bridge. The triggering sequence of switches that gives balanced output voltage is (A) 1 ... 3, 4, 2, 6 (C) 1, 6, 2, 4, 3, 5 (D) 1, 4, 2, 5, 3, 6

Last Answer : In a dc-ac 3-phase MOSFET bridge inverter circuit, the switches are marked in a sequence as 1, 2, 3 in the top-half and 4, 5, 6 in the bottom half of the bridge. The triggering sequence of switches that gives balanced output voltage is 1, 6, 2, 4, 3, 5

How IGBT convert DC into AC in solar inverter?

Last Answer : Igbt alone cant convert dc to ac. igbt half bridge or full bridge or three phase topology could be used to convert dc to ac. also igbt gates should be driven by microcontroller or pwm/spwm gate driving signals ... e4(-) and g4 c2e1 and c4e3 pins are AC output pins. its name is igbt inverter.

What do you call a circuit that controls the magnetron output?A. Inverter B. Impeller C. Modulator D. Converter

Description : What do you call a circuit that controls the magnetron output? A. Inverter B. Impeller C. Modulator D. Converter

Last Answer : C. Modulator

How does a DC to AC inverter work?

Description : How does a DC to AC inverter work?

Last Answer : Start with a switching circuit that supplies the DC with one polarity then reverses the polarity, back and forth. That's done at the target AC frequency. An inverter that's any good will knock ... and will further attempt to smooth the wave to more closely resemble normal AC power from the mains.

A large dc motor is required to control the speed of the blower from a 3 -phase ac source. The suitable ac to ...

Description : A large dc motor is required to control the speed of the blower from a 3 -phase ac source. The suitable ac to dc converter is, 3 -phase (a) Fully controlled bridge converter ( ... bridge converter with freewheeling diode (c) Half controlled bridge converter (d) Converter pair in sequence control

Last Answer : a fullu control

When a line commutated converter operates in the inverter mode

Last Answer : When a line commutated converter operates in the inverter mode It delivers real power to the A.C. supply.

A single-phase fully controlled thyristor bridge ac-dc converter is operating at a firing angle of 25 and an

Description : A single-phase fully controlled thyristor bridge ac-dc converter is operating at a firing angle of 25o and an overlap angle of 10o with constant dc output current of 20 A. The fundamental power factor (displacement factor) at input ac mains is  (A) 0.78 (B) 0.827 (C) 0.866 (D) 0.9

Last Answer : A single-phase fully controlled thyristor bridge ac-dc converter is operating at a firing angle of 25o and an overlap angle of 10o with constant dc output current of 20 A. The fundamental power factor (displacement factor) at input ac mains is 0.78

In which type of AC to DC converter efficiency is higher :

Description : In which type of AC to DC converter efficiency is higher :

Last Answer : In which type of AC to DC converter efficiency is higher : solid state rectifier

The voltage output of an AC generator is accurately controlled by _____________. A. changing the sensitivity of the prime mover to large changes in voltage B. varying the reluctance of the air gap C. varying the DC exciter voltage D. shorting out part of the armature windings

Description : The voltage output of an AC generator is accurately controlled by _____________. A. changing the sensitivity of the prime mover to large changes in voltage B. varying the reluctance of the air gap C. varying the DC exciter voltage D. shorting out part of the armature windings

Last Answer : Answer: C

What is the turn-off time for converter grade SCRs and inverter grade SCRs?

Description : What is the turn-off time for converter grade SCRs and inverter grade SCRs?

Last Answer : Turn-off time for converter grade SCRs is 50 – 100 ms turn-off time for converter grade SCRs and inverter grade SCRs and for inverter grade SCRs is 3 – 50 ms.

A three-phase, fully controlled thyristor bridge converter is used as line commutated inverter to feed 50 kW

Description : A three-phase, fully controlled thyristor bridge converter is used as line commutated inverter to feed 50 kW power 420 V dc to a three-phase, 415 V(line), 50 Hz ac mains. Consider dc link current to be constant. The rms current of the thyristor is  (A) 119.05 A (B) 79.37 A (C) 68.73 A (D) 39.68 A

Last Answer : A three-phase, fully controlled thyristor bridge converter is used as line commutated inverter to feed 50 kW power 420 V dc to a three-phase, 415 V(line), 50 Hz ac mains. Consider dc link current to be constant. The rms current of the thyristor is 68.73 A

The output from a full wave rectifier is (a) A pulsating uni-directional current (b) A DC voltage (c) Zero (d) An AC voltage

Description : The output from a full wave rectifier is (a) A pulsating uni-directional current (b) A DC voltage (c) Zero (d) An AC voltage

Last Answer : a) A pulsating uni-directional current

What type of current would flow through the load in figure 'B' shown in the illustration? EL-0091 A. AC only B. DC only C. AC or DC depending on control winding polarity D. AC or DC depending on instantaneous polarity of the source

Description : What type of current would flow through the load in figure 'B' shown in the illustration? EL-0091 A. AC only B. DC only C. AC or DC depending on control winding polarity D. AC or DC depending on instantaneous polarity of the source

Last Answer : Answer: B

A 3-phase fully controlled bridge converter with free wheeling diode is fed from 400 V, 50 Hz AC source and

Description : A 3-phase fully controlled bridge converter with free wheeling diode is fed from 400 V, 50 Hz AC source and is operating at a firing angle of 60o. The load current is assumed constant at 10 A due to high load inductance. The input ... 0.552 (C) IDF IPF = = 0.5; 0.478 (D) IDF IPF = = 0.5; 0.318 

Last Answer : A 3-phase fully controlled bridge converter with free wheeling diode is fed from 400 V, 50 Hz AC source and is operating at a firing angle of 60o. The load current is assumed constant at 10 A due to high ... (IDF) and the input power factor (IPF) of the converter will be IDF IPF = = 0.5; 0.478

A network consists of several inductances connected in parallel. The equivalent inductance of the network is

Description : A network consists of several inductances connected in parallel. The equivalent inductance of the network is given by (A) the sum of the individual inductances. (B) the reciprocal of the ... of individual inductances. (D) the reciprocal of the sum of reciprocals of individual inductances.

Last Answer : A network consists of several inductances connected in parallel. The equivalent inductance of the network is given by the reciprocal of the sum of reciprocals of individual inductances.

Universal motors will operate on AC or DC current, and are generally found in _____________. A. portable tools B. large pump motors C. turbo electric main motors D. forced draft fans

Description : Universal motors will operate on AC or DC current, and are generally found in _____________. A. portable tools B. large pump motors C. turbo electric main motors D. forced draft fans

Last Answer : Answer: A

Which of the following statements concerning AC circuits is correct? A. The power factor of a resistive circuit is always zero. B. True power in an inductive circuit always equals apparent power. C. Inductive reactance varies directly with the frequency and the inductance. D. Total opposition to the flow of alternating current depends upon the amount of reactive power.

Description : Which of the following statements concerning AC circuits is correct? A. The power factor of a resistive circuit is always zero. B. True power in an inductive circuit always equals apparent power. ... . D. Total opposition to the flow of alternating current depends upon the amount of reactive power.

Last Answer : Answer: C

What is the relation between voltage and current in AC circuit containing only inductance?

Description : What is the relation between voltage and current in AC circuit containing only inductance?

Last Answer : Current (I) is lags behind the voltage by 90°. I = V/XL amps. XL = 2πfL ohms. P = I * V * cosϕ watts. (Where cosϕ is 90 because current lags behind voltage by 90°. So cosϕ 90° = 0) ∴ P = I * V * 0 = 0 watts.

The transient current in lossless L-C circuit when excited from an AC source is, sine wave

Description : The transient current in lossless L-C circuit when excited from an AC source is, sine wave  (a) Critically damped (b) Underdamped (c) Overdamped (d) Undamped

Last Answer : The transient current in lossless L-C circuit when excited from an AC source is, sine wave Undamped

A single-phase voltage source square -wave inverter feeds pure inductive load. The waveform of the load current will be

Description : A single-phase voltage source square -wave inverter feeds pure inductive load. The waveform of the load current will be

Last Answer : A single-phase voltage source square -wave inverter feeds pure inductive load. The waveform of the load current will be triangular

Give the circuit analysis of current source inverter with resistive load.

Description : Give the circuit analysis of current source inverter with resistive load. What are the main difference between voltage source inverter and current source inverter?

Last Answer : Current source inverter (CSI): In current source inverter, the output current is independent of load. The input current of current source inverter is constant. Current source converter converts DC input current to ... are connected in parallel. In CSI diodes are connected in series.

In a 230 V, 50 Hz single-phase SCR bridge converter operating at a firing delay angle, α and with large R-L load,

Description : In a 230 V, 50 Hz single-phase SCR bridge converter operating at a firing delay angle, α and with large R-L load, the input source current is (A) sinusoidal current (B) constant dc current (C) continuous rectangular pulses (D) alternating rectangular pulses

Last Answer : In a 230 V, 50 Hz single-phase SCR bridge converter operating at a firing delay angle, α and with large R-L load, the input source current is alternating rectangular pulses

A 3-phase voltage source inverter operates in 180° conduction mode with a star connected resistive load. If input

Description : A 3-phase voltage source inverter operates in 180° conduction mode with a star connected resistive load. If input dc voltage is 100 V, then the peak to peak output line voltage is :

Last Answer : A 3-phase voltage source inverter operates in 180° conduction mode with a star connected resistive load. If input dc voltage is 100 V, then the peak to peak output line voltage is : 200 V

The expression for the inductance in terms of turns, flux and current is given by a) L = N dφ/di b) L = -N dφ/di c) L = Niφ d) L = Nφ/i

Description : The expression for the inductance in terms of turns, flux and current is given by a) L = N dφ/di b) L = -N dφ/di c) L = Niφ d) L = Nφ/i

Last Answer : a) L = N dφ/di

A 3 -phase, fully controlled, converter is feeding power into a DC load at a constant current of 150 A, the rms

Description : A 3 -phase, fully controlled, converter is feeding power into a DC load at a constant current of 150 A, the rms value of the current flowing through each thyristor of the converter is

Last Answer : Please show the solution for this question

If resistance is 20 Q. and inductance is 27 in a R-L series circuit, then time constant of this circuit will be?

Description : If resistance is 20 Q. and inductance is 27 in a R-L series circuit, then time constant of this circuit will be?

Last Answer : 0.1s

Benefits of Using a DC Inverter During Road Trips?

Description : Benefits of Using a DC Inverter During Road Trips?

Last Answer : The average person cannot identify a DC inverter simply by looking at one. However, most drivers do know what purpose these small devices serve. These inverters plug into a vehicle's DC outlet and ... should always consider going out and buying one of these little units for their next road trip.

A separately excited dc motor operating in first quadrant is fed from 3-phase semi -converter free -wheeling

Description : A separately excited dc motor operating in first quadrant is fed from 3-phase semi -converter free -wheeling diode is open circuited, then the motor :  (A) can be operated in first quadrant (B) ... in first & second quadrants (C) can be operated in first & fourth quadrants (D) cannot be operated

Last Answer : A separately excited dc motor operating in first quadrant is fed from 3-phase semi -converter free -wheeling diode is open circuited, then the motor : can be operated in first & fourth quadrants

What is AC and DC current

Last Answer : dc

Do cell phones use AC or DC current?

Description : Do cell phones use AC or DC current?

Last Answer : DC of course.

Is current from a battery AC or DC?

Description : Is current from a battery AC or DC?

Last Answer : The current from the battery is DC

why AC current is smaller than DC current

Description : why ACcurrent is smaller than DC current

Last Answer : AC current is not always smaller than DC.

what is the different between AC and DC current ?

Description : what is the difference between AC and DC current ?

Last Answer : AC is generated using Alternator. DC is generated using DC generator. AC changes its direction periodically. DC do not change its direction periodically. AC have non zero frequency. DC have zero ... Power factor of AC is between 0 and 1. But power factor of DC is always 1.

What is the load of an AC inverter on a battery?

Description : What is the load of an AC inverter on a battery?

Last Answer : answer:If this is a new inverter, figure it is only 80% efficient. If you are truly drawing 1100 Watts continuously then the inverter is drawing 1375 Watts. You are feeding it with 12 volts Power = ... gas generator. Sorry for the bad news but the most of the laws of physics are difficult to break.

Which variable frequency drive should I use for a 1.5 ton inverter AC?

Description : Which variable frequency drive should I use for a 1.5 ton inverter AC?

Last Answer : You do not need to use an external variable frequency drive for the said AC. You have mentioned that it is inverter AC. It means the AC is already fitted with a built in ... / compressor depending upon the room condition, external temperature, temperature setting etc. It is little complicated.

Manufacturers claim up to savings on inverter tech AC h. 50% c) 55% i. 60% d) 65%

Description : Manufacturers claim up to savings on inverter tech AC h. 50% c) 55% i. 60% d) 65%

Last Answer : 60%

Inverter technology AC cost further. a) More c) less b) Equal d) all of the above

Description : Inverter technology AC cost further. a) More c) less b) Equal d) all of the above

Last Answer : more

74. Inverter tech AC if usage of AC is more than 1000 hour in a year and per unit cost of electricity is more than rs _________per unit. a) 10 c) 5 b) 7 d) 4

Description : 74. Inverter tech AC if usage of AC is more than 1000 hour in a year and per unit cost of electricity is more than rs _________per unit. a) 10 c) 5 b) 7 d) 4

Last Answer : 5

In inverter tech AC some manufactures claim up to saving____________. a) 50% c) 60% b) 20% d) 80%

Description : In inverter tech AC some manufactures claim up to saving____________. a) 50% c) 60% b) 20% d) 80%

Last Answer : 60%

In comparison an inverter tech AC being flexible tonnage AC can save more over_________star AC. a) BEE3 c) BEE1 b) BEE5 d) BEE4

Description : In comparison an inverter tech AC being flexible tonnage AC can save more over_________star AC. a) BEE3 c) BEE1 b) BEE5 d) BEE4

Last Answer : BEE5

The direction of rotation of an inverter fed 3-phase ac motor is reversed by

Description : The direction of rotation of an inverter fed 3-phase ac motor is reversed by (A) a mechanical reversing switch (B) reversing the input dc link voltage (C) operating the inverter as a rectifier (D) changing the sequence of switching

Last Answer : The direction of rotation of an inverter fed 3-phase ac motor is reversed by changing the sequence of switching

When three-phase AC power is supplied to the device shown in the illustration, the output will be _____________. EL-0063 A. single-phase AC B. split-phase AC C. three-phase DC D. unidirectional DC

Description : When three-phase AC power is supplied to the device shown in the illustration, the output will be _____________. EL-0063 A. single-phase AC B. split-phase AC C. three-phase DC D. unidirectional DC

Last Answer : Answer: D

The output voltage of a three-phase alternator is regulated by the _____________. A. AC voltage to the armature B. AC voltage to the field C. DC voltage to the armature D. DC voltage to the field

Description : The output voltage of a three-phase alternator is regulated by the _____________. A. AC voltage to the armature B. AC voltage to the field C. DC voltage to the armature D. DC voltage to the field

Last Answer : Answer: D

Why does using ac vice dc bias voltage result in a stronger output signal?

Description : Why does using ac vice dc bias voltage result in a stronger output signal?

Last Answer : Because an ac bias voltage of the proper frequency and level places the input signal away from both steps in the magnetism curve. The result is two undistorted output signals that are combined into one strong output.

What component causes a generator to produce dc voltage rather than ac voltage at its output terminals?

Description : What component causes a generator to produce dc voltage rather than ac voltage at its output terminals?

Last Answer : A commutator

An AC supply of 230 V is applied to half wave rectifier circuit. A transformer turns ratio is 20 : 1. Find i) Output DC voltage (ii) Peak Inverse Voltage (PIV)

Description : An AC supply of 230 V is applied to half wave rectifier circuit. A transformer turns ratio is 20 : 1. Find i) Output DC voltage (ii) Peak Inverse Voltage (PIV)

Last Answer : Solution:

What is the condition to be satisfied in the selection of L and C in a series inverter?

Description : What is the condition to be satisfied in the selection of L and C in a series inverter?

Last Answer : R2< 4LC

On AC vessels, which of the following statements represents the most difficult problem involved in obtaining a DC potential suitable for use by computer components? A. A stepdown transformer is always required. B. Vessel vibrations affect the voltage source. C. The voltage must be rectified and made ripple free. D. Rectifiers cannot operate with voltage regulators.

Description : On AC vessels, which of the following statements represents the most difficult problem involved in obtaining a DC potential suitable for use by computer components? A. A stepdown transformer is ... voltage must be rectified and made ripple free. D. Rectifiers cannot operate with voltage regulators.

Last Answer : Answer: C

The most common source of excitation for synchronous motors is a/an ______________. A. stepup transformer B. half-wave rectifier C. DC supply D. AC supply

Description : The most common source of excitation for synchronous motors is a/an ______________. A. stepup transformer B. half-wave rectifier C. DC supply D. AC supply

Last Answer : Answer: C