The output of a JK flip-flop with asynchronous preset and clear inputs is ‘1’. The output can be changed to ‘0’ with one of the following conditions by applying A) J = 0, K = 0 and using a clock B) J = 1, K = 0 and using the clock C) Asynchronous preset input D) J = 1, K = 1 and using the clock 

1 Answer

Answer :

The output of a JK flip-flop with asynchronous preset and clear inputs is ‘1’. The output can be changed to ‘0’ with one of the following conditions by applying J = 1, K = 1 and using the clock 

Related questions

Description : The output of a JK flipflop with asynchronous preset and clear inputs is 1'. The output can be changed to 0' with one of the following conditions. (A) By applying J = 0, K = 0 and using a clock. (B) ... (C) By applying J = 1, K = 1 and using the clock. (D) By applying a synchronous preset input.

Last Answer : Ans: C Preset state of JK Flip-Flop =1 With J=1 K=1 and the clock next state will be complement of the present state.

Description : State functions of preset, clear, clock and SR inputs related to SR flip flop.

Last Answer : Preset Input: is an asynchronous input to set the Q output to 1 Clear Input: is also asynchronous input to reset the Q output to 0 Clock Input: is used to input external logic clock pulse (HIGH-LO) to ... set the Q output. And R is the reset input which is used to reset Q output of the flipflop.

Description : In a positive edge triggered JK flip-flop, J = 1, K = 0 and clock pulse is rising, Q will be (a) 0 (b) 1 (c) showing no change (d) toggle 

Last Answer : In a positive edge triggered JK flip-flop, J =1, K= 0 and clock pulse is rising, a Q will be 1

Description : Read the following statements: i. Gate is a combinational logic. ii. JK Flip-flop in toggle mode is not combinational logic. iii. MSJK Flip-flop suffers from race-around. iv. Counters are sequential circuits. Which choice is correct? (A) i, ii (B) i, ii, iv (C) ii, iii, iv (D) i, ii, iii

Last Answer : Read the following statements: i. Gate is a combinational logic. ii. JK Flip-flop in toggle mode is not combinational logic. iii. MSJK Flip-flop suffers from race-around. iv. Counters are sequential circuits. Which choice is ... (A) i, ii (B) i, ii, iv (C) ii, iii, iv (D) i, ii, iii

Description : In a JK flip-flop, for what input next state is complement of the present state (A)J=0,K=0 (B)J=1,K=0 (C)J=0,K=1 (D)J=1,K=1

Last Answer : In a JK flip-flop, for what input next state is complement of the present state (A)J=0,K=0 (B)J=1,K=0 (C)J=0,K=1 (D)J=1,K=1

Description : State function of preset and clear in flip flop.

Last Answer : In the flip flop , when the power is switched on, the state of the circuit is uncertain i.e. may be Q = 1 or Q = 0.  Hence, the function of preset is to set a flip flop i.e. Q = 1 and the function of clear is to clear a flip flop i.e. Q = 0.

Description : For JK flip flop with J=1, K=0, the output after clock pulse will be (A) 0. (B) 1. (C) high impedance. (D) no change.

Last Answer : (B) 1.

Description : In a positive-edge-triggered JK flip-flop, if J and K both are high then the output will be ............. on the rising edge of the clock. (A) No change (B) Set (C) Reset (D) Toggle

Last Answer : (D) Toggle 

Description : Which Flip Flop is used to store data in registers? (A) D Flip Flop (B) JK Flip Flop (C) RS Flip Flop (D) None of the Above

Last Answer : (A) D Flip Flop

Description : What is the operation of JK flip-flop?

Last Answer : When K input is low and J input is high the Q output of flip-flop is set. When K input is high and J input is low the Q output of flip-flop is reset. When both the inputs ... are high it is possible to set or reset the flip-flop (ie) the output toggle on the next positive clock edge.

Description : What is the operation of JK flip-flop?

Last Answer : When K input is low and J input is high the Q output of flip-flop is set. When K input is high and J input is low the Q output of flip-flop is reset. When both the inputs K and ... are high it is possible to set or reset the flip-flop (ie) the output toggle on the next positive clock edge.

Description : The MSI chip 7474 is (A) Dual edge triggered JK flip-flop (TTL). (B) Dual edge triggered D flip-flop (CMOS). (C) Dual edge triggered D flip-flop (TTL). (D) Dual edge triggered JK flip-flop (CMOS).

Last Answer : Ans: C MSI chip 7474 dual edge triggered D Flip-Flop.

Description : Which of the following flip-flops is free from race condition ? (A) T flip-flop (B) SR flip-flop (C) Master-slave JK flip-flop (D) None of the above

Last Answer : (C) Master-slave JK flip-flop

Description : What is race around condition in JK flip flop and how it can be eliminated?

Last Answer : For the racing around to take place, it is necessary to have the enable input high along with J=K=1. As the enable input remains high for a long time in a JK latch, the problem of ... to zero. Hence the multiple toggling cannot take place. Thus the edge triggering avoids the race around condition.

Description : The frequency of the clock signal applied to the rising edge triggered D flip-flop shown in figure is 10 KHZ. The frequency of the signal at Q is A) 10 KHz B) 2.5 KHz C) 20 KHz D) 5 KHz

Last Answer : The frequency of the clock signal applied to the rising edge triggered D flip-flop shown in figure is 10 KHZ. The frequency of the signal at Q is 5 KHz

Last Answer : A sample flip-flop is a 1-bit storage cell.

Description : Define flip-flop.

Last Answer : Flip Flop: Flip-flop is a circuit which can be turned on and off with the same signal. It is like a single switch button when the first time you press it turns on and when second time you press ... flip-flop like SR flip-flop, D flip-flop, JK flip-flop, SR flip-flop, master-slave flip-flop etc.

Description : Design a asynchronous sequential circuit with 2 inputs T and C. The output attains a value of 1 when T = 1 & c moves from 1 to 0. Otherwise the output is 0

Last Answer : • Obtain the state diagram • Obtain the flow table • Using implication table reduce the flow table • Using merger graph obtain maximal compatibles • Verify closed & covered conditions • Plot the reduced flow table • Obtain transition table • Excitation table • Logic diagram

Description : The output of SR flip flop when S=1, R=0 is (A) 1 (B) 0 (C) No change (D) High impedance

Last Answer : Ans: A As for the SR flip-flop S=set input R=reset input ,when S=1, R=0, Flip-flop will be set.

Description : Output of NAND gate is 0. for three inputs when:

Last Answer : Output of NAND gate is 0. for three inputs when: all the inputs are 1

Description : The bits are shifted and the first flip-flop receives its binary information from the____ a. Serial output b. Serial input c. Both d. None

Last Answer : b. Serial input

Description : If a voltage (positive or negative) is measured on the "1" output of a flip-flop, what state is it in?

Last Answer : SET state.

Description :  A J -K flip-flop with J= 1 and K= 1 has a 20 kHz clock input. The Q output is : (A) Constant and low (B) Constant and high (C) A square wave with 20 kHz frequency (D) A square wave with 10 kHz frequency

Last Answer : a

Description :  For a NAND gate, when one or more inputs are low then the output will be A) Low B) High C) Alternately high and low D) High or low depending on relative magnitude of inputs 

Last Answer :  For a NAND gate, when one or more inputs are low then the output will be High 

Description : For the circuit shown in figure, the Boolean expression for the output y in terms of inputs P, Q, R and S is

Last Answer : For the circuit shown in figure, the Boolean expression for the output y in terms of inputs P, Q, R and S is P+Q+R+S

Description : The gate whose output is LOW, if and only if all the inputs are HIGH, is

Last Answer : The gate whose output is LOW, if and only if all the inputs are HIGH, is NAND

Description : The output of a 2-input NAND gate with high at both the inputs will be • High • Low • High & low • None of the above.

Last Answer : The output of a 2-input NAND gate with high at both the inputs will be Low

Last Answer : A gate in which all inputs must be low to get a high output is called A NOR gate.

Description : Determine the output frequency for a frequency division circuit that contains 12 flip–flops with an input clock frequency of 20.48 MHz: (1) 10.24 kHz (2) 5 kHz (3) 30.24 kHz (4) 15 kHz 

Last Answer : Determine the output frequency for a frequency division circuit that contains 12 flip–flops with an input clock frequency of 20.48 MHz: 5 kHz

Description : How many flip-flops are required to build a binary counter circuit to count from 0 to 1023 ? (a) 1 (b) 6 (c) 10 (d) 23 

Last Answer : (c)10

Description : I had a great uncle who said a 'flip-flop' was an old slang word for a radio. Has anyone else ever heard this?

Last Answer : I never heard of that. I’m 67.

Description : When I look at her, my heart does a flip-flop. Why?

Last Answer : JP Must be a case of puppy love. You made me stop and look at the picture of my two goldens that I keep on my desk. I lost them a few years ago. Enjoy every minute of your time with her.

Description : Is the flip flop sandals on guys a fad or is it here to stay?

Last Answer : They are here to stay. I don't wear them because I'm desperate to fit in. I wear them because I like air on my feet. I'm also used to colder temperatures, so it's not a big deal to wear them ... better because there is colder air on my feet and they are easy to slip on if I have to run out quickly.

Description : What is SR flip-flop ?

Last Answer : SR Flip-flop is the simplest flip flop. The full form of SR is - Set Reset . In SR flip-flop, setting the output state to 1 or HIGH is called SET and 0 or LOW is called RESET . SR flip- ... formed by connecting two NAND gates or NOR gates and connecting the input of one to the output of the other .

Description : How many flip flop are required to store the binary value of 1101?

Last Answer : What is the answer ?

Description : 15 things you never knew about tarek and christina from flip or flop?

Last Answer : Answer written by Urbo.com in March 21 2016It all started as an office romance.Tarek and Christina met at a real estate office. "We started our relationship working together," Christina said. Was it ... Scott's "Brother vs. Brother." What impromptu HGTV appearances are in store for them this year?

Description : What's That Flip Flop Feeling My Heart Is Making?

Last Answer : A heart arrhythmia can be a life-threatening situation and requires medical attention. If you suffer with this heart condition chances are that you have already been counseled on avoiding stimulants. ... this activity will bring the heart back under control until medical attention can be consulted.

Description : In a computer is capable to store single binary bit. A) Capacitor B) Flip flop C) Register D) Inductor

Last Answer : Answer : B

Description : Which of the following features is predicted by the Nicolson–Singer fluid mosaic model of biological membranes? (A) Membrane lipids do not diffuse laterally (B) Membrane lipid is primarily in a monolayer form (C) Membrane lipids freely flip-flop (D) Membrane proteins may diffuse laterally

Last Answer : Answer : D

Description : Which of the following is not a magnetic memory: a) Flip-flop b) Tape c) Drum d) Disk

Last Answer : Ans: A

Description : The circuit used to store one bit of data is known as_____ A. Encoder B. OR C. Flip Flop D. None of the Above

Last Answer : C. Flip Flop

Description : The schematic diagram shown in the illustration represents which of the listed solid-state circuits? EL-0069 A. Bridge rectifier B. Magnetic amplifier C. Flip-flop generator D. Cathodic amplifier

Last Answer : Answer: A

Description : What is a master-slave flip-flop?

Last Answer : A master-slave flip-flop consists of two flip-flops where one circuit serves as a master and the other as a slave.

Description : What is edge-triggered flip-flop?

Last Answer : The problem of race around condition can solved by edge triggering flip flop. The term edge triggering means that the flip-flop changes state either at the positive ... negative edge of the clock pulse and it is sensitive to its inputs only at this transition of the clock.

Description : What is the operation of T flip-flop?

Last Answer : T flip-flop is also known as Toggle flip-flop. • When T=0 there is no change in the output. • When T=1 the output switch to the complement state (ie) the output toggles.

Description : What is the operation of D flip-flop?

Last Answer : In D flip-flop during the occurrence of clock pulse if D=1, the output Q is set and if D=0, the output is reset.

Description : What are the different types of flip-flop?

Last Answer : There are various types of flip flops. Some of them are mentioned below they are, RS flip-flop SR flip-flop D flip-flop JK flip-flop T flip-flop

Description : Define Flip flop.

Last Answer : The basic unit for storage is flip flop. A flip-flop maintains its output state either at 1 or 0 until directed by an input signal to change its state.

Description : In which computers, the binary number are represented by a set of binary storage device such as flip flop: a. Microcomputer b. Personal computer c. Digital computer

Last Answer : c. Digital computer

Description : Register are assumed to use positive-edge-triggered _ a. Flip-flop b. Logics Cc. Circuit d. Operation

Last Answer : a. Flip-flop