What is the Laplace transform of step signal of 5 units magnitude? 

A) 5s B) 5/s C) s/5 D) 1/s 

1 Answer

Answer :

What is the Laplace transform of step signal of 5 units magnitude? 

A) 5s B) 5/s C) s/5 D) 1/s 

Related questions

Description : Integration of step signal gives (A) Impulse signal. (B) Ramp function. (C) Parabola. (D) Square pulse.

Last Answer : Integration of step signal gives Ramp function.

Description : Transform the following sinusoids to phasors

Last Answer : Transform the following sinusoids to phasors

Description : What is the Fourier transform of a Gaussian time pulse? A) Uniform B) Gaussian C) Impulses D) Pulse

Last Answer : What is the Fourier transform of a Gaussian time pulse? A) Uniform B) Gaussian C) Impulses D) Pulse

Description : In a Bode magnitude plot, which one of the following slopes would be exhibited at high frequencies by a 4th order all-pole system? (A) – 80 dB/decade (B) – 40 dB/decade (C) +40 dB/decade (D) +80 dB/decade

Last Answer : In a Bode magnitude plot, which one of the following slopes would be exhibited at high frequencies by a 4th order all-pole system? (A) – 80 dB/decade (B) – 40 dB/decade (C) +40 dB/decade (D) +80 dB/decade

Description : In R-L-C series resonant circuit magnitude of resonance frequency can be changed by changing the value of?

Last Answer : In R-L-C series resonant circuit magnitude of resonance frequency can be changed by changing the value of L or C.

Description : Magnitude of current at resonance in R-L-C circuit?

Last Answer : The current will be maximum if it is a series rlc circuit.

Description : If two equal forces of magnitude P act at an angle 9°, their resultant will be

Last Answer : If two equal forces of magnitude P act at an angle 9°, their resultant will be IP cos 9/2.

Description : The magnitude of various voltage drops that occur in an alternator depends on?

Last Answer : The magnitude of various voltage drops that occur in an alternator depends on load current.

Description : How to Be a Good Step Parent ?

Last Answer : How to Be a Good Step Parent Being a good step parent is something everyone in that situation has to work at. Each family is different, and becoming a part of a family with an established hierarchy can be ... As long as you're doing it for their own good, then you have nothing to be worried about.

Description : What does double integration of a unit step function lead to? A) A doublet B) A ramp C) An impulse D) A parabola 

Last Answer : What does double integration of a unit step function lead to? A) A doublet B) A ramp C) An impulse D) A parabola 

Description : A second order system shows 100% overshoot in its unit step response. It can be categorized as (A) underdamped system. (B) overdamped system. (C) Critically damped system. (D) undamped system.

Last Answer : A second order system shows 100% overshoot in its unit step response. It can be categorized as undamped system.

Description : Explain the single pass transformer design procedure step by step by giving its flowchart.

Last Answer : single pass transformer design procedure step by step by giving its flowchart:

Description : Units of Measurement

Last Answer : 1 horse power is 745.7 watts 1 horse power = work equal to lifting 550 lbs of weight to one foot for one second 1 calorie is equal to 4.2 Joules 1 barrel is equal to ... often chlorine or bromine. Use: as solvents, as aerosol propellants, in refrigeration. It is commonly used in refrigerator.

Description : Basic SI units

Last Answer : Basic SI units

Description : List the four different units of pressure.

Last Answer : Different units of pressure. 1) Measured in pascal(Pa). 2) Measured in pounds per square inch(psi) 3) Measured in kilogram per square of centimeter (Kg/cm2 ). 4) Measured in newton per square meter (N/m2 ). 5) Measured in terms of liquid columns. mmHg or mmWc

Description : What is the choice of size and number of generator units in interconnected power system?

Last Answer : Choice of Size and Number of Generating Units: 1. The size/rating and number of generating units in such way that they approximately match with the load curve as closely as possible. 2. In ... , if power plant is connected to grid system then generating unit of higher capacity can be installed.

Description : What are the seven base units?

Last Answer : Length, mass, time, electric current, temperature, luminous intensity and amount of substance are the seven base units.

Description : The units of moment of inertia of mass are?

Last Answer : Moment of inertia mass*velocity [Kg M T'-1]

Description : The unit of work or energy in S.I. units is

Last Answer : The unit of work or energy in S.I. units is joule.

Description : The unit of force in S.I. units is

Last Answer : The unit of force in S.I. units is Newton.

Description : .2.The period of a signal is 10ms. What is its frequency in kilohertz?

Last Answer : 100

Description : Explain Briefly What Happens When The Intr Signal Goes High In The 8085?

Last Answer : Answer :The INTR is a maskable interrupt for the 8085. It has the lowest priority and is also non vectored. When this INTR signal goes into the high state the following things occur / ... the processor saves the address of new instruction into the STACK and an interrupt service subroutine begins.

Description : State different types of electrical signal and draw all types of waveforms.

Last Answer : Types of electrical signals 1) Sine wave 2) Triangular wave 3) Square wave Waveforms

Description :  basic characteristics of sound signal.

Last Answer : Level and loudness: The amplitude of a sound wave determines its loudness or volume. A larger amplitude means a louder sound, and a smaller amplitude means a softer sound. The loudness of a ... the reproducing system should be capable of handling the maximum and minimum power in the same ratio. 

Description : What is the significance of signal conditioner? Explain the need of following in mechatronics system. i) Isolator ii) Filter iii) Amplifier iv) Data converter

Last Answer : Significance: Signal conditioning means manipulating an analog signal in such a way that it meets the requirements of the next stage for further processing. Signal inputs accepted by signal ... -frequency converters, current-to-voltage converters, current loop converters, and charge converters.  

Description : List different methods of demodulation of FM signal.

Last Answer : Balanced Slope detection Ratio detector Foster Seeley discriminator Phase locked loop demodulator 

Description : For a signal conditioner explain the terms linearization and signal conversion.

Last Answer : Definition :  1. linearization : Many primary elements produce nonlinear outputs and the signal must be linearized to produce a nearly ideal calibration. Specialized analog circuits such as offsetting circuits, ... signal. Even computer algorithms are also used. 2.Signal conversion :

Description : Analog signal

Last Answer : .embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }

Description :  If it takes a transmitted signal 1m sec to go up to the target and come back after reflection, how far is the transmitter from the target? A) 150 Km B) 150 m C) 15 Km D) 1500 m 

Last Answer :  If it takes a transmitted signal 1m sec to go up to the target and come back after reflection, how far is the transmitter from the target? A) 150 Km B) 150 m C) 15 Km D) 1500 m 

Description : In 8085, whenever a signal is received at TRAP terminal, its program execution is transferred to a subroutine on address A) 0000 H B) 002C H C) 0024 H D) 0004 H

Last Answer : In 8085, whenever a signal is received at TRAP terminal, its program execution is transferred to a subroutine on address 0024 H

Description :  If a signal band limited to fm is sampled at a rate less than 2fm, then the constructed signal will be A) Large in amplitude B) Small in amplitude C) Distorted D) Distortion less

Last Answer :  If a signal band limited to fm is sampled at a rate less than 2fm, then the constructed signal will be Distorted 

Description :  An energy signal has G(f) = 20. Its energy density spectrum is A) 20 B) 100 C) 400 D) 800  

Last Answer : 400

Description : The time base signal in Cathode Ray Oscilloscope (CRO) is  (1) A square wave signal (2) A sawtooth signal (3) A triangular wave signal (4) A sinusoidal signal

Last Answer : 2 Saw tooth 

Description : The standard for long distance analog signal transmission in process control industry is (A) 4-20 mV (B) 0-20 mA (C) 4-20 mA (D) 0-5 V

Last Answer : The standard for long distance analog signal transmission in process control industry is 4-20 mA

Description : What are the advantages of a digital signal?

Last Answer : It  has   only   two  variable   input  and  output (low   or    high)   (0  or    5).

Description : Explain buck or step down converter and draw its waveforms.

Last Answer : Buck converter or Step down converter: Buck converter is a step-down converter. The buck converter step-down the output voltage and step up the output current. Buck converter is a DC to DC converter. ... load. The output voltage is controlled by controlling on period and off period.

Description : The clock frequency of an 8085 microprocessor based system is 3 MHz. What should be the minimum pulse width of the INTR signal so that it is recognized successfully? A) 5.6 µs B) 5.7 µs C) 5.8 µs D) 5.9 µs

Last Answer : The clock frequency of an 8085 microprocessor based system is 3 MHz. What should be the minimum pulse width of the INTR signal so that it is recognized successfully? A) 5.6 µs B) 5.7 µs C) 5.8 µs D) 5.9 µs

Description : Explain the significance of the Laplace transform in control system.

Last Answer : Significance of Laplace Transform- * Laplace transform convert higher order integral differential equation into simple algebraic form. * Laplace transform converts the differential equation into an algebraic ... equations. * Laplace transform convert time domain to frequency domain (s-plane). 

Description : If x(t) is of finite duration and absolutely integrable, the ROC of its Laplace Transform X(s) is (A) Left half-plane (B) Entire s-plane (C) Right half-plane (D) Finite duration plane

Last Answer : If x(t) is of finite duration and absolutely integrable, the ROC of its Laplace Transform X(s) is Entire s-plane

Description : Suppose the potential function is a step function. The equation that gets satisfied is a) Laplace equation b) Poisson equation c) Maxwell equation d) Ampere equation

Last Answer : a) Laplace equation

Description : In transmission line, which of the following is the first step in the procedure of using stub matching? A. Calculate stub susceptance. B. Calculate load admittance C. Connect stub to load D. Transform conductance to resistance

Last Answer : B. Calculate load admittance

Description : Hormone receptors that stimulate cAMP production (A) are part of a complex of two proteins that transform the external signal into internal cAMP production (B) are proteins distinct and separate from those ... binding of the hormone (D) are not very specific and bind a number of different hormones

Last Answer : Answer : B

Description : Fourier transform is a mathematical procedure to obtain the __________ of a given input signal. (A) spectrum (B) integration (C) difference (D) none of the above

Last Answer : (A) spectrum

Description : Find the magnitude of the displacement current density in air at a frequency of 18GHz in frequency domain. Take electric field E as 4 units. a) 18 b) 72 c) 36 d) 4

Last Answer : d) 4

Description : A ball is thrown vertically upwards from the ground with a speed of 80 feet/second. In the English system of units, what is the magnitude and direction of the acceleration of the ball? 

Last Answer : ANSWER: 32 FEET PER SECOND SQUARED DOWN or TOWARDS THE EARTH  

Description : Finite element analysis deals with . a.approximate numerical solution b.non-boundary value problems c.Laplace equations d.All of the above

Last Answer : a.approximate numerical solution

Description : Which of the following is not a method to describe a curve mathematically? a.Explicit form b.Laplace form c.Implicit form d.Parametric form

Last Answer : b.Laplace form

Description : What is the basic difference in the arguments related to the origin of the earth given by (a) Kant and Laplace (b) Chamberlain and Moulton. -Geography

Last Answer : Kant and Laplace’s Principle: The hypothesis considered that the planets were formed out of a cloud of material associated with a youthful sun, which was slowly rotating. According to this ... of a companion to the sun to have been coexisting. These arguments are called binary theories.

Description : Identify the advantage of using method of images. a) Easy approach b) Boundaries are replaced by charges c) Boundaries are replaced by images d) Calculation using Poisson and Laplace equation

Last Answer : a) Easy approach

Description : The function V = e x sin y + z does not satisfy Laplace equation. State True/False. a) True b) False

Last Answer : b) False