As per Shannon’s channel capacity theorem, if samples are transmitted in ‘T’ seconds over a noisy channel

As per Shannon’s channel capacity theorem, if samples are transmitted in ‘T’ seconds over a noisy channel which is bandlimited to ‘B’ Hz. The number of samples ‘n’ is given by (symbols/notations carry their usual meaning) A) B/T B) T/B C) 2BT D) BT/2 
by

1 Answer

Answer :

As per Shannon’s channel capacity theorem, if samples are transmitted in ‘T’ seconds over a noisy channel which is bandlimited to ‘B’ Hz. The number of samples ‘n’ is given by (symbols/notations carry their usual meaning) A) B/T B) T/B C) 2BT D) BT/2 

by

Related questions

What is the channel capacity of a noisy channel with conditional probability of error p = 1/2?

Description : What is the channel capacity of a noisy channel with conditional probability of error p = 1/2? A) 0 B) 1 C) Infinity D) 2  

Last Answer : What is the channel capacity of a noisy channel with conditional probability of error p = 1/2?  A) 0 B) 1 C) Infinity D) 2  

Noisy neighbors: Do you shush them or ignore them?

Description : Noisy neighbors: Do you shush them or ignore them?

Last Answer : answer:If it's an occasional thing don't be a weenie about it. If it's several times a week or more I'd have a little talk with them face to face, no passive aggressive note leaving ... morning, along with the geese and roosters. haha But real Jackasses are always preferable to the two legged kind.

How to Fix a Noisy Ceiling Fan

Description : How to Fix a Noisy Ceiling Fan

Last Answer : How to Fix a Noisy Ceiling Fan Ceiling fans are great additions to any room: Not only do they take up minimal space, but they also provide that much-needed cool breeze in any part of the room on warm ... s a chance that it's a production glitch. Check with the ceiling fan's company as a last resort.

If it takes a transmitted signal 1m sec to go up to the target and come back after reflection, how far is

Description :  If it takes a transmitted signal 1m sec to go up to the target and come back after reflection, how far is the transmitter from the target? A) 150 Km B) 150 m C) 15 Km D) 1500 m 

Last Answer :  If it takes a transmitted signal 1m sec to go up to the target and come back after reflection, how far is the transmitter from the target? A) 150 Km B) 150 m C) 15 Km D) 1500 m 

Norton’s theorem states that a complex network connected to a load can be replaced with an equivalent

Description : Norton’s theorem states that a complex network connected to a load can be replaced with an equivalent impedance (A) in series with a current source (B) in parallel with a voltage source (C) in series with a voltage source (D) in parallel with a current source

Last Answer : in parallel qith current source

Describe IS – 95 forward link channel structure.

Description : Describe IS – 95 forward link channel structure.

Last Answer : The IS-95 forward Channel structure consists of four types of logical Channels - pilot Channel, synchronization Channel, paging Channel, and forward traffic Channels. Each forward carrier Channel contains one ... . This code is known as the channel identifier. This code is different for each user

Define the following terms : (i) Base Station (ii) Control Channel (iii) Mobile Station (iv) Page

Description : Define the following terms : (i) Base Station (ii) Control Channel (iii) Mobile Station (iv) Page 

Last Answer : i) Base Station: - A fixed station in a mobile radio system used for radio communication with mobile stations. Base stations are located at the center or on the edge of a coverage region ... the page throughout the service area using base stations which broadcast the page on a radio carrier.

Explain estimation of channel capacitance of CMOS.

Description : Explain estimation of channel capacitance of CMOS.

Last Answer : Capacitance estimation: The dynamic response i.e. switching speed of MOS system depends on capacitance associated with the MOS devices which are formed by different layers in MOS transistors ... are due to three dimensional, distributed charge voltage relations within the device structure. 

The threshold voltage of an n- channel enhancement mode MOSFET is 0.5V when the device is biased at

Description : The threshold voltage of an n- channel enhancement mode MOSFET is 0.5V when the device is biased at a gate voltage of 3V. Pinch off would be occurs at a drain voltage of (A) 1.5V (B) 2.5V (C) 3.5V (D) 4.5V

Last Answer : The threshold voltage of an n- channel enhancement mode MOSFET is 0.5V when the device is biased at a gate voltage of 3V. Pinch off would be occurs at a drain voltage of 2.5V

What is channel length modulation in MOSFET?

Description : What is channel length modulation in MOSFET?

Last Answer : Shortening of lenght of the inverted channel region with increase in drain bias for large drain biases due to which current increases with drain bias and output resistance decreases is called channel length modulation in MOSFET.

The transit time of the current carriers through the channel of a JFET decides it's ?

Description : The transit time of the current carriers through the channel of a JFET decides it's?

Last Answer : The transit time of the current carriers through the channel of a JFET decides it's gate characteristics.

State the Thevenin’s theorem. Also write stepwise procedure for applying Thevenin’s theorem to simple circuits.

Description : State the Thevenin’s theorem. Also write stepwise procedure for applying Thevenin’s theorem to simple circuits.

Last Answer : Thevenin's Theorem: Any two terminal circuit having number of linear impedance and sources (voltage, current, dependent, independent) can be represented by a simple equivalent circuit consisting of a single voltage ... 's equivalent circuit: Step V: Determination of Load current:

Maximum Power Transfer Theorem 1

Description : Maximum Power Transfer Theorem 1

Last Answer : Maximum Power Transfer Theorem 1

Write the steps for finding the current through an element by Thevenin’s theorem.

Description : Write the steps for finding the current through an element by Thevenin’s theorem.

Last Answer : Steps to find Thevenin's equivalent circuit, taking an example is as follows:  1. From the given circuit (fig.a),Remove RL from the terminals A and B and redraw the circuit as shown in ... (fig.d)from where it was temporarily removed earlier.  Current flowing through RL is given by 

State Thevenin’s Theorem.

Description : State Thevenin’s Theorem.

Last Answer : Any two terminal circuit having number of linear impedances and sources (voltage, current, dependent, independent) can be represented by a simple equivalent circuit consisting of a single voltage ... circuit across the two terminals, when the sources are replaced by their internal impedances. 

State Superposition Theorem.

Description : State Superposition Theorem.

Last Answer : Superposition Theorem: In any linear, bilateral, multisource network the voltage across or the current through any branch is given by algebraic sum of all individual voltages or currents caused ... sources acting alone with all other sources replaced by their internal resistances if any.

State superposition theorem applied to D.C. circuits.

Description : State superposition theorem applied to D.C. circuits.

Last Answer : Superposition Theorem applied to D.C. circuits: Superposition theorem states that in any linear, bilateral, multisource network, the response (voltage across any element or current through any ... each source acting alone, while the other sources are replaced by their internal resistances.

State maximum power transfer theorem for DC circuit.

Description : State maximum power transfer theorem for DC circuit.

Last Answer : Maximum power transfer theorem for DC circuit: The maximum power transfer theorem states that the source or a network transfers maximum power to load only when the load resistance is equal ... removed (disconnected) ii) All internal independent sources are replaced by their internal resistances.

Millman's theorem yields equivalent

Description : Millman's theorem yields equivalent  (1) Impedance or Resistance (3) Voltage source (2) Current source (4) Voltage or Current source

Last Answer : Millman's theorem yields equivalent Voltage or Current source

Which of the following statements is incorrect ? (A) Superposition theorem is useful for Linear and Non-linear

Description : Which of the following statements is incorrect ? (A) Superposition theorem is useful for Linear and Non-linear circuit analysis when several sources are present in the circuit. (B) ... purely resistive, maximum power transfer is achieved under the condition : Load Resistance = Source Resistance

Last Answer : Which of the following statements is incorrect ? (A) Superposition theorem is useful for Linear and Non-linear circuit analysis when several sources are present in the circuit. ... purely resistive, maximum power transfer is achieved under the condition : Load Resistance = Source Resistance

The superposition theorem requires as many circuits to be solved as there are?

Description : The superposition theorem requires as many circuits to be solved as there are?

Last Answer : The superposition theorem requires as many circuits to be solved as there are sources.

While calculating Rth in Thevenin's theorem and Norton equivalent?

Description : While calculating Rth in Thevenin's theorem and Norton equivalent?

Last Answer : While calculating Rth in Thevenin's theorem and Norton equivalent all independent sources are made dead.

In Thevenin's theorem, to find Z?

Description : In Thevenin's theorem, to find Z?

Last Answer : In Thevenin's theorem, to find Z all independent voltage sources are short circuited and all independent current sources are open circuited.

Millman's theorem yields?

Description : Millman's theorem yields?

Last Answer : Millman's theorem yields equivalent voltage or current source.

Application of Norton's theorem to a circuit yields?

Description : Application of Norton's theorem to a circuit yields?

Last Answer : Application of Norton's theorem to a circuit yields equivalent current source and impedance in series.

The superposition theorem is applicable to?

Description : The superposition theorem is applicable to?

Last Answer : The superposition theorem is applicable to linear responses only.

The concept on which Superposition theorem is based is?

Description : The concept on which Superposition theorem is based is?

Last Answer : The concept on which Superposition theorem is based is linearity.

Superposition theorem can be applied only to circuits having?

Description : Superposition theorem can be applied only to circuits having?

Last Answer : Superposition theorem can be applied only to circuits having linear bilateral elements.

According to Lami's theorem?

Last Answer : According to Lami's theorem if three forces acting at a point are in equilibrium, each force is proportional to the sine of the angle between the other two.

The superposition theorem is based on the concept of ?

Description : The superposition theorem is based on the concept of ?

Last Answer : The superposition theorem is based on the concept of Linearity.

Can you apply Thevenin's theorem in an AC circuit?

Description : Can you apply Thevenin's theorem in an AC circuit?

Last Answer : It  can  be  applied  to  AC  circuits

Breaking capacity of a circuit breaker is usually expressed in terms of

Description : Breaking capacity of a circuit breaker is usually expressed in terms of  (1) Ampere (2) Volts (3) MW (4) MVA

Last Answer : Breaking capacity of a circuit breaker is usually expressed in terms of MVA

Power station having Load factor = 70%, capacity factor = 50%, used factor = 60%, maximum demand = 20MW

Description : Power station having Load factor = 70%, capacity factor = 50%, used factor = 60%, maximum demand = 20MW then annual energy production is  (1) 122.8 GWh (2) 198.55 GWh (3) 128.2 GWh (4) 188.82 GWh

Last Answer : Power station having Load factor = 70%, capacity factor = 50%, used factor = 60%, maximum demand = 20MW then annual energy production is 122.8 GWh

Overload capacity of diesel engines is usually restricted to?

Last Answer : Overload capacity of diesel engines is usually restricted to 2 percent.

In a power plant if the maximum demand on the plant is equal to the plant capacity, then?

Last Answer : In a power plant if the maximum demand on the plant is equal to the plant capacity, then plant reserve capacity will be zero.

Large capacity generators are invariably?

Last Answer : Large capacity generators are invariably hydrogen cooled.

Generating capacity connected to the bus bars and ready to take load when switched on is known as ?

Last Answer : Generating capacity connected to the bus bars and ready to take load when switched on is known as spinning reserve.

For high value of diversity factor, a power station of given installed capacity will be in a position to supply?

Last Answer : For high value of diversity factor, a power station of given installed capacity will be in a position to supply more number of consumers.

________ is the method of encoding audio signals used in US standard 1544 kbit/s 24 channel PCM systems. A. Shannon’s law B. A-law C. Newton’s law D. Mu-law

Description : ________ is the method of encoding audio signals used in US standard 1544 kbit/s 24 channel PCM systems. A. Shannon’s law B. A-law C. Newton’s law D. Mu-law

Last Answer : D. Mu-law

For a ______ channel, we need to use the Shannon capacity tofind the maximum bit rate. A) noisy B) noiseless C) bandpass D) low-pass

Description : For a ______ channel, we need to use the Shannon capacity tofind the maximum bit rate. A) noisy B) noiseless C) bandpass D) low-pass

Last Answer : noisy

Suppose a digitized voice channel is made by digitizing 8 kHz bandwidth analog voice signal. It is required to sample the signal at twice the highest frequency (two samples per hertz). What is the bit rate required, if it is assumed that each sample requires 8 bits? (A) 32 kbps (B) 64 kbps (C) 128 kbps (D) 256 kbps

Description : Suppose a digitized voice channel is made by digitizing 8 kHz bandwidth analog voice signal. It is required to sample the signal at twice the highest frequency (two samples per hertz). What is the bit rate required, if it ... sample requires 8 bits? (A) 32 kbps (B) 64 kbps (C) 128 kbps (D) 256 kbps

Last Answer : (C) 128 kbps

What theorem sets a limit on the maximum capacity of a channel with a given noise level? A. Nyquist theorem B. Hartley law C. Shannon-Hartley theorem D. Shannon theorem

Description : What theorem sets a limit on the maximum capacity of a channel with a given noise level? A. Nyquist theorem B. Hartley law C. Shannon-Hartley theorem D. Shannon theorem

Last Answer : C. Shannon-Hartley theorem

______ sets the limit on the maximum capacity of a channel with a given noise level. A. Hartley theorem B. Shannon-hartley theorem C. Nyquist theorem D. Shannon theorem

Description : ______ sets the limit on the maximum capacity of a channel with a given noise level. A. Hartley theorem B. Shannon-hartley theorem C. Nyquist theorem D. Shannon theorem

Last Answer : B. Shannon-hartley theorem

________ sets a limit on the maximum capacity of a channel with a give noise level. A. Hartley theorem B. Shannon-Hartley theorem C. Nyquist theorem D. Shannon theorem

Description : ________ sets a limit on the maximum capacity of a channel with a give noise level. A. Hartley theorem B. Shannon-Hartley theorem C. Nyquist theorem D. Shannon theorem

Last Answer : B. Shannon-Hartley theorem

State the Shannon Hartley’s theorem for channel capacity. Explain the effect of S/N ratio and bandwidth on channel capacity.

Description : State the Shannon Hartley’s theorem for channel capacity. Explain the effect of S/N ratio and bandwidth on channel capacity.

Last Answer : In information theory, the Shannon-Hartley theorem tells the maximum rate at which information can be transmitted over a communications channel of a specified bandwidth in the presence of noise. According to Shannon, ... value of S/N with increase in B,assuming the signal power S to be constant.

If the frequency spectrum of a signal has a bandwidth of500 Hz with thehighest frequency at 600 Hz, what shouldbe the samplingrate, according to the Nyquist theorem? A) 200 samples/s B) 500 samples/s C) 1000 samples/s D) 1200 samples/s

Description : If the frequency spectrum of a signal has a bandwidth of500 Hz with thehighest frequency at 600 Hz, what shouldbe the samplingrate, according to the Nyquist theorem? A) 200 samples/s B) 500 samples/s C) 1000 samples/s D) 1200 samples/s

Last Answer : 1200 samples/s

The analog signal given below is sampled by 600 samples per second for m(t) = 3 sin 500 pt + 2 sin 700 pt

Description : The analog signal given below is sampled by 600 samples per second for m(t) = 3 sin 500 pt + 2 sin 700 pt then folding frequency is: (1) 500 Hz (2) 700 Hz (3) 300 Hz (4) 1400 Hz 

Last Answer : The analog signal given below is sampled by 600 samples per second for m(t) = 3 sin 500 pt + 2 sin 700 pt then folding frequency is: 300 Hz

For a ______ channel, the Nyquist bit rate formula defines thetheoretical maximum bit rate. A) noisy B) noiseless C) bandpass D) low-pass

Description : For a ______ channel, the Nyquist bit rate formula defines thetheoretical maximum bit rate. A) noisy B) noiseless C) bandpass D) low-pass

Last Answer : noiseless

The capacity of a channel is

Last Answer : The capacity of a channel is maximum rate of information transmission.